Planning a multiple hardware configuration

We are in the process of planning to deploy an additional job server on a separate machine. The new machine will match the our original configuration. Our current configuration uses the SAP/BW integration kit.
Is there anything we need to look out for while we are proceeding? We are planning to deploy the Crystal Job Servers to the new system, and expect to be able to manage the new server(s) through our existing CMS. Is this a correct assumption?

Yes, the assumption is correct, install everything in the same order as original install (you do not need web tier portion, but might want to install as well, just in case or for load balancing purposes). Install SAP IK.
If you did extended install, your new node should be already clustered to your original one. Just stop/disable/delete server you don't need in CMC on node2 and you're good to go.

Similar Messages

Hardware configuration planning

We are migrating from Stellent 7.5.1 to UCM 11g and doing h/w capacity planning for new version. Want to know what are the parameters to do the capacity planning.
We are assuming:
- 200 concurrent users in 1 min, with the capacity to upload 5-8 mb of file upload by every user.
- The uploaded document gets converted in to PDF and webviewable format.
- The repository size of 1.5 TB with growth rate of 100 gb per quarter.
Is there a way/calculation mechanism/tool helps to analyse the capacity of production server hardware configuration with the above mentioned usage and scenarios.
What is the Oracle's minimum and recommended h/w configuration for a UCM11g.
Thanks

user13435697 wrote:
We are assuming:
- 200 concurrent users in 1 min, with the capacity to upload 5-8 mb of file upload by every user.
- The uploaded document gets converted in to PDF and webviewable format.
- The repository size of 1.5 TB with growth rate of 100 gb per quarter.In order to calculate the sizing more precisely you need to estimate also
a) how many pages an approximate user will see (e.g. per minute) - this estimates UI activity
b) how many checkins will occur (e.g. per minute) - is the 5-8 mb one bigger file or several smaller files?
As a rule of thumb (if you don't know anything better), you may calculate that one license CPU can serve approx. 500 users, if their requirements do not contain anything special.
In your particular case, it will be desirable to separate conversions; that is, install IBR on separate servers. With 200 docs of size 5-8 MB per minute (I used the available benchmark 10MB), the calculation sheet gives me the estimate of 195(!) Conversion Servers (if I used the other closest available benchmark, it gives me 20 CSs, so expect to be somewhere in between).
Anyway, one thing is obvious: your project will be about mastering conversions.

Best Hardware Configuration for oracle RAC

Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
Edited by: aram on Sep 23, 2011 8:08 AM

aram wrote:
Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
HI,
For your home testing you might need a latest technology to get a smooth and fast installation. i7 processor might be the ideal with memory at least 8GB. if you're planning to have more than 3 VMs running at the same time than you need 12-16GB memory at least.
From my experience installing on vm and allocated memory 2.5GB each VM the installation could take 15-30minutes
Cheers

How to set up Planning on Multiple Servers

Hi,
1) I am trying to install a Finance Planning application so that it runs on one Planning Web Server and the other operations Planning application on another Planning 9.3.1 web server. Is that possilbe?
2) May be unrelated question:
HP_Windows_Install.pdf has only a few lines explaining how to set up Planning on Multiple Servers. Is it as simple as that?
Here are the "few lines" from install.pdf:
Perform the same installation and configuration process on your secondary servers, making sure to choose
Planning Web Server component for any secondary server.
Make sure you select Reuse existing tables when prompted during the Configure a Database task
in the Configuration utility.

Tomcat.
But it will be nice to know the steps for Weblogic too - as Weblogic will be bundled "free" with future releases of Planning.

Hardware Configuration recommendation for SOA/BPM/OSB 11.1.1.5 Cluster

Hi,
Want to find out what is the recommended hardware configuration including Memory on the box. Trying to install a 2 Node Cluster of SOA 11.1.1.5 with SOA/BPM, BAM, OSB part of the same domain. All binaries to be installed on a NAS. OS is HP-UX. How much memory is ideal on each box if running SOA Service / BPM workflows and processes,BAM,OSB, Custom ADF Task Flow Apps with a large number of transactions. SO wondering what is an ideal configuration. IS there a matrix or a some kind of spreadsheet to come up with the numbers.
Thanks

Unfortunately there is no simple way to figure this out. The recommendation varies on the basis of multiple factors (from load to avg size of the payload). Please contact your local Oracle Sales Representative and they should help you out in identifying the best possible configuration/sizing for your system.
Regards,
Anuj

Need Server Hardware Configuration Advice

Good morning!
We are using Microsoft Visual SourceSafe for version control.
Two years ago, when I requested that RoboHelp be connected to a
database application for version control and multi-author support
(I asked for RoboSource Control on a dedicated server), they gave
us SourceSafe on a shared server. We now have 40 help systems and
have suffered many losses (corrupt database = rebuild the project
using the html files) as that shared server has gone down while
RoboHelp was connected to it.
I'm submitting a work request to our IT department today for:
1) Upgrade from RoboHelp Office 5 to RoboHelp 6
2) Purchase and installation of RoboHelp Server 6
3) Purchase of a dedicated server
I'm stuck on what to ask for with respect to the server
hardware configuration - and afraid that if I don't provide them
with detailed specifications that they'll provide us with another
inadequate setup. We currently have a need for 13 simultaneous
authors - some over VPN - to work under version control, and we're
growing. Can anyone provide me with a recommendation for server
hardware configuration?
Adobe's web site only specifies the system requirements for
the RoboHelp Server 6 software installation - and sales support
told me that they are not able to recommend a server configuration.
I don't like going into this at the mercy of anyone in our IT
department! My husband, who is a database administrator, gave me
the following advice and I'm wondering if that's all I need to tell
IT or are there other potential issues I need to cover?
quote:
For the storage or “hard drive” you want a RAID
controller with an array of hard drives for your data. You will
have a C: drive for the OS but your data should be separated from
the OS on a RAID controller with an array of hard drives.
For RAM you want a few gigs.
In addition to the application software
requirement of 100 MB of hard drive space, we currently have 42GB
(2.5 years) of help system data. We have 40 help systems spread
between 10 databases (separated by lines of business) - we used
this configuration because early in the game we thought our
corruption issues were stemming from databases that were too large
for SourceSafe to handle. I'm wondering, with RoboHelp Server 6
will we need to use multiple databases or can it handle 40+ help
systems in one database?
I also have a need for a few help systems to be in their own
databases because we are running them for other companies owned by
the bank and that data can't be co-mingled - can RoboHelp Server 6
handle multiple databases?
Thanks in advance for any assistance you can provide.

Hi THessler
I've used Microsoft Visual Source Safe (VSS) quite
successfully for many years with RoboHelp with no issues such as
you are citing. You further state something I and probably many
others here find very disturbing.
You said:
We now have 40 help systems and have suffered many losses
(corrupt database = rebuild the project using the html files) as
that shared server has gone down while RoboHelp was connected to
it.
This would seem to imply that you aren't using RoboHelp
correctly with the source control system. And if this proves to be
true, you will likely see the SAME behavior with RoboSource Control
or any other source control system you decide to use.
Please allow me to explain. RoboHelp does not like working in
any form of a networked situation, period. If you use it this way,
it will frequently crash and corrupt files and all sorts of ill
mannered things. Bottom line is that RoboHelp absolutely needs to
be working on files only when they are stored on your local PC.
I know I know, how does one accomplish this with a Source
Control system? After all, the fact the Source Control system has
to sit on a server means working from a server, no?
Here's the deal. With any Source Control system you use, you
should find that you have the main Source Control database, which
resides on a server.
But (and here's the kicker) when you configure users that
participate in Source Control, each user is configured with
something called a
Working folder. This is a special folder where the files
from the database are copied to. RoboHelp should be working on
files inside this folder. As they are updated, copies are placed on
the server copy.
Sooo, before abandoning VSS or before totally configuring the
new source control system, I'd first ensure you are using it
properly. You may just find that you don't need to spend the money
for a new source control system after all.
Cheers... Rick

Hardware Configuration in MAX when not logged in as Administrator

I am attempting to load a .cfg file for a VME device through the Hardware Configuration option on MAX. When you are not logged in as an administrator, the option is greyed out. I do not have the option of always running this as an administrator. However, I can set special permissions on certain folders or registry keys if necessary to allow non-administrators access to those locations in order to get the hardware configuration to work in MAX.
Does anybody know what special permissions would need to be set?

Hi Pual,
What operating system are you using? I’m not sure if there are additional specific files or registry keys, but could you give your use full control over the Measurement and Automation Explorer program? Let me know if you can test that out.
Matt
Applications Engineer
National Instruments

What is the reason that the integrated camera does not exist in the hardware configuration?

When I start Face Time, my integrated camera doesn't work.
I check my hardware configuration, but, the camera doesn't exist.

Welcome to Apple Support Communities
Does it happen with other applications that use the camera, like Photo Booth? If so, I recommend you to reset the PRAM > http://support.apple.com/kb/HT1379 Then, reset the SMC > http://support.apple.com/kb/HT3964
After resetting the SMC, start the iMac and see if you can use your camera. If not, hold Command and R keys while your computer is starting and reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718
If it doesn't work, it's a hardware issue, so make a backup of your data and take the iMac to an Apple Store or reseller

Specific Hardware Configuration for a new ATG Project

Hi All,
We're going to setup a new ATG Project in my organisation with ATG 10.
Can you please suggest me the best Hardware configuration to setup new project?
Thanks & Regards,
Narasimha Rao D.

Hi,
I am not able to figure out which version is jboss-eap-5.1\jbosss.
Can you please let me know which version of JBoss to download mentioned in this link http://www.jboss.org/jbossas/downloads/
for ATG versions mentioned below
1)9.3 which version of jboss to use ???
2)10.0.2 which version of jboss to use ???

How to include hardware configuration in the installer?

I have a VI developed with LabVIEW 2009 V9.0f2 using a USB-6009 and two of its analog inputs. The VI uses the DAQ Assistant to configure the USB-6009. I include the DAQmx Core Runtime 9.0.2 with the LabVIEW Runtime Engine 2009 in the installer build. I spent most of the past week trying to get the application to run after installation.
If I leave out the Hardware Configuration from MAX (no configData.nce file) and run the installer on another machine the application produces an Error-200378 Custom Scale Specified Does Not Exist when it runs (I searched the 200378 error code - no help).
If I include the Hardware Configuration from MAX to produce a configData.nce file, and select Perform the Import Silently to Merge the Import Data when the installer is built, I get this message during the install to another computer:
.\Distribution.cpp(1902): IInstallerError 11004Developer Error. Distribution contains invalid dependencies:1. Product NI Remote Provider for MAX 4.6.1 ({FBD23528-31AC-412A-9DEE-6CEA814A7430}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.2. Product NI LabVIEW Real-Time Error Dialog ({297FA251-FF30-4F16-978C-4A65EA804EFF}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.3. Product NI LVBrokerAux 8.2.1 ({0FB31DF8-38DF-4C9D-B313-AFAFC3FBA02B}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.Correct the distribution and try again. I’m not really sure that the installer even uses the configData.nce file during the build.
Another error I have seen (I have done several other builds using various installer settings) is that the app appears to run fine except it is unable to find the USB-6009, even though the operating system picks it up and installs it in the device manager seemingly without error.
I am a novice LabVIEW user. Any help you could give would be greatly appreciated.
Bill
Solved!
Go to Solution.

Hi Willygene,
Give the steps listed in KnowledgeBase 52GH9OW5: Why Do I Get Error 200378 When Running a Stand Alone Application? a shot, does this help with the 200378 error?
Do you have DAQmx installed on the other machine? Are you unbundling it with your installer? If so, what Run-Time Level are you buiding into your installer? Can you post screenshots of the errors that you are getting?
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

Hardware Configuration tab doesn't show Vlan Configuration of VM

In SCVMM 2012 R2 I can go into the properties of a VM and set the VLAN and it saves and correctly sets the VLAN on the machine.
If I then go back into the properties the VLAN option is unchecked. If I make a change to any other setting and save it then removes the VLAN from the machine, disconnecting it.
On SCVMM 2012 SP1 it worked fine, on SCVMM 2012 R2 the Hardware configuration is always missing the VLAN information.
Can somebody else confirm that they are having the same issue with SCVMM 2012 R2?

Yes - I confirm that I am having the same/similar issue with SCVMM 2012 r2. In my case, I am trying to assign a different VLAN after deployment. In SCVMM, I don't see the existing VLAN information, however, VLAN ID is correct on HyperV Manager. If I change
the VLAN ID, the change reflects in the VM however it will be missing on SCVMM. Seems like a bug. I am also opening a case with Microsoft support.
Cheers ! Shaba

A reasonable hardware configuration for Linux OAS

Has anyone out there tried to run
Oracle 8 for Linux and OAS 3.02
all on the same toasted PC/pentium server?
Could you tell me the nature of your
hardware configuration (processor speed, ram, etc)
if you feel the performance is acceptable for
development (not for actual business operation).
The technical FAQ lists 48 megs and any
Pentium to run Oracle 8 for Linux which
verges on ridiculously low.
I just want to know a reasonable
configuration to run both Oracle 8 and OAS .
Thanks,
Heji
null

I have been runnig OAS/O8 on a Pii/300Mhz system with 128mb of
ram, and so far I have no real complaints on speed. I even tuned
the SGA to give a little better performance and still have around
40 or so MB free. BTW, I haven't really tried to mess around
with the Linux version of OAS, but have used the Solaris version
previously, have you noticed any problems with the wrb starting
up? I have seen some error messages saying "No processes..." or
something, looks like an error.. have you experienced this?
Tom Tyson
mark theodoras (guest) wrote:
: Heji (guest) wrote:
: : The technical FAQ lists 48 megs and any
: : Pentium to run Oracle 8 for Linux which
: : verges on ridiculously low.
: The install guide says 32M minimum for O8. I'm not sure with
: OAS. Given (pc) memory is cheap, I am running O8/OAS3 with
128M,
: with no complaints.
: Given laptop memory is not so cheap, are there folks running O8
: and OAS3 with 48, 40, or less ram ????
: I can second any pentium would suffice. I am using P133 & P166
: systems, and the CPU is NOT the bottleneck.
: Mark
null

I want to install xp on my MacBook Pro with i5 processor, but that creates the partition and restart the computer just stays in the following message: The Setup is inspecting your hardware configuration of your computer, someone can help me with this ?

I want to install xp on my MacBook Pro with i5 processor, but that creates the partition and restart the computer just stays in the following message: The Setup is inspecting your hardware configuration of your computer, someone can help me with this ?

The answer has not changed since your last post here https://discussions.apple.com/thread/3230576?tstart=0
There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

Hardware Configuration Problem

I've installed Windows XP partitioned on my other macs, but I'm having problems on my Mac Pro. Can anyone help with a solution, please? I have a four hard disc set up on my mac pro. The first disc is the one partitioned with my 10.6 boot on the same disc.
Using Boot Camp with Snow Leopard installed, all goes well after partitioning. It installs Windows Xp from the disc, yet when it restarts, I get a black screen with a message as follows:
"Windows could not start because of a computer disc hardware configuration problem.
Could not read from the selected boot disc. Check boot path and disk hardware.
Please check windows documentation...."
As I wrote above, as it restarts ready to load xp, it come up with the message above. And of-course, I cannot load the rest of the drivers from the 10.6 install disc.
Help, please.
Message was edited by: Philip P Thomas

I still haven't been able to install but thanks for folks advice.
Anyone else?
I have a internal four hard drive set up. The mac OS and Windows Bootcamp is set up on Hard Drive 1, whilst the other three are stiped with data, completely separate from the apps and windows.
The windows has to be set up on Hard Drive 1, the same disc as my mac boot drive. Using Boot Camp, it is not possible to set up xp/bootcamp on another hard drive other than an internal one.

Planning a multiple hardware configuration

Similar Messages

Maybe you are looking for