Planning based on Six month sales

Hi Frnds,
Currently we are using Flexibe planning method where we enter the 4 months projection quanity and then run the mrp at the start of every month.
Now my company needs a planning based on the last six months sales, where the system should automatically pick up the billing qty of the last months of the products and then on that basis Mrp run should take place.
Is there any standard procedure available for this in sap???
Regards
Rajesh

Hi Rajesh,
I think you need to check it by implementing Forcast process from SAP.
Regards,
Hiren

Similar Messages

  • PPDS - Product hurestic giving planned  orders six month later

    Dear All
    I m facing a prooblem while executing the product heurisitc in APO-PPDS. Problem is that planned orders are scheduled six month later even though the requirments are in early period. I hv checked the resource capacity and time profile. In addition I hv also run the report /SAPAPO/CRES_CAPACITY_LENGTHEN. Still the orders are postponed.
    Please suggest what can be the possible causes for this error.
    Thnx
    VS

    I faced a similar problem but while creating orders manually in APO. Here is the link to the thread; you may like to refer it if some of the solutions provided would be of help:
    Order created with Delay in RRP3 page
    In my case the Transportation Lead Time + GR Processing time was making the orders shifted in the future...

  • Planned Orders Are Being Created In The Future Period (About Six Months onw

    Dear All,
    We are facing a problem that when we execute the product heuristics for a particular location - item, planned orders are not getting generated as per the demand element in the current period but they are getting generated in future period say six months from now... We could NOT understand that Why the system is pushing the orders in future period. We have checked the following parameters :
    Calendar is active for  the period upto DEC"2012.
    Time Streams have been genereted for the particular resource.
    Resource(s) do exist in Live Cache.
    Sufficient capapcity is available in the current period (as viewed from the resource planning table).
    Please advise that what other parameters should be checked in order to get the planned orders in current period. In this regard, we shall like to confirm that we are facing this issue since last 8 - 10 days, earlier, there was NOT such an issue.
    With Best Regards,
    Sanjeev Chugh
    06-JAN-2012

    Hi Sanjeev,
    Did you maintain any value for planning time fence, and if yes, how big is it? This could be one possible reason why system is not able to plan the orders (also depends on what Heuristics you are using).
    In RRP3, double click on your planned orders and check out the start date and the end date. Is your start date also lying in the future, or is it that due to long time in your operations (somehow your PDS/PPMs got messed up?), orders availability got pushed to the future.
    I am not an expert in PPDS, but I can only think of different lead times coming into picture which could possibly push your planned orders availability to the future.
    See if this helps.
    Thanks - Pawan

  • How many devices can we install photoshop on based on our monthly plan?

    how many devices can we install photoshop on based on our monthly plan?

    If you did not deactivate a machine you did not have a free activation.  You would need to download the direct installer and install Photoshop as a trial.  Later if you free up an activation by deactivating one of your two activations. You should be able to activate your trial install by using menu Help>Sign In...

  • Report for monthly sales(sales office wise,sales group wise,plant wise)

    Please send the Report for monthly sales(sales office wise,sales group wise,plant wise)  with T.CODE.,

    Hi
    As per my knowledge there is no Standard Report in SAP based on sales office, sales group. and plant.
    You may create your own report using MC18,MC21 and MC24.... Otherwise ask your ABAPer's help...
    Muthu

  • Studio : Chart Based on day/month/year

    In Studio , There is a requirement for us to display chart based on day/month/year .
    Since Date attribute is not displayed as a Dimension in the chart configuration list , I have divided  date attribute into  day/month/year attributes and based on that I generated a sample chart
    But now I'm facing with a problem
    Suppose there are records for only July and Sep then the chart shows up for July and Sep , It doesn't show up for august.
    I agree that there are no records for august in my data domain that is the reason august is not displayed in the chart . But as per our requirement we should display august as well with zero count.
    I'm curious to know if there is any way to do this .

    The idea behind the calendar record type is it is a secondary, new record type you're introducing that compliments your "sales" record type.  The RECORDs you provided would be your "sales" record type, not your "calendar" record type.  To continue with your example, your "sales" records would look like what you provided:
    =============== RECORD ==================
    Id: 1
    sales_amount : 1000
    Month: Oct
    RecordType: sales
    date: 2012-10-01T00:00:00.000Z
    day: 01
    year: 2012
    =============== RECORD ==================
    Id: 5
    sales_amount: 1000
    Month: Dec
    RecordType: sales
    date: 2012-12-01T00:00:00.000Z
    day: 01
    year: 2012
    ==========================================
    And your "calendar" record type would be loaded subsequently.  I usually provide one Endeca record for every day for this record type:
    =============== RECORD ==================
    Id: 1
    Month: Oct
    RecordType: calendar
    date: 2012-10-01T00:00:00.000Z
    day: 01
    year: 2012
    =============== RECORD ==================
    Id: 2
    Month: Oct
    RecordType: calendar
    date: 2012-10-02T00:00:00.000Z
    day: 02
    year: 2012
    ==========================================
    (and so on, one for each day up to today...yawn)....
    =============== RECORD ==================
    Id: 790
    Month: July
    RecordType: calendar
    date: 2013-07-31T00:00:00.000Z
    day: 31
    year: 2013
    ==========================================
    Thus, when you write an EQL statement like:
    RETURN foo AS SELECT
    SUM(sales_amount) AS "TotSales"
    GROUP BY Month
    You will get a Month bucket for every month, where the "calendar" record type will be sure to offer a month where sales don't offer it...aka. fill in any "holes".
    HTH,
    Dan
    http://branchbird.com

  • Time Series Line Chart - Monthly Sales - Make $0 or "No Sales" show up - not skipped

    Post Author: kevinday17
    CA Forum: Charts and Graphs
    I have been messing with my chart for a while and I guess I'll just ask for help since I can't figure it out.  All I am trying to do is chart out monthly sales dollars by customer.  Simple enough...I have it working except I want to be able to see a $0 plotted on my graph when there were no sales in a month.  Currently it just skips over that month and goes to the next where there is data (month after i.e next group summary field)).  I've tried all sorts of ways of grouping.  If I use the "group by date, monthly," on the "Order Date" field, I can't chose it as the "On Change of" under Advanced chart (single arrow is greyed out).   So I ended up making a huge formula to make my own groups of months.  My GH2 is the customer (and my chart), GH3 is my Grouping for month and year, and the detail is every single sales order.  My graph points are based on summary data; sum of all the sales orders for that customer for that month. 
    How do I tell Crystal Reports that if there were no sales in December, then tell me 0.  Don't just ignore it.
    Maybe there is an option to make the X Axis Fixed with points (month-year, in order).  It would be nice to have it uniform for every customer.  I would love to see every graph that prints out have 36 x-axis coordinates; one for every month of the last 36 months (jan-05, feb-05, mar-05......dec-07) regardless of whether or not the customer had sales or not.
    Thanks so much in advance. 
    Kevin

    Post Author: V361
    CA Forum: Charts and Graphs
    I have CR XI, I created a formula and used it to create the chart section
    if (isnull ()) then 0 else
    So if your AMNT is a null value it should put 0, else the AMNT

  • Counting date transactions for last six months

    Post Author: crystalrook
    CA Forum: Formula
    Any help is greatly appreciated.  I am running Crystal XI.
    I have an order field (PurchaseOders.PODatePlaced) for each item. There can be multiple orders in the same month for each item of course.  I would like to COUNT each  PurchaseOders.PODatePlaced based on the month it was purchased for the last six months from a date parameter.
    My table looks like this"
    Item            PODatePlaced
    1234           11/12/2007
    1234            11/20/2007
    1234            10/15/2007
    1234            9/30/2006
    1234            12/5/2007
    1234             12/6/2007
    I am trying to get the results to read as follows (only for the last 6 months):
    Items          December         November     October
    1234               2                      2                1
    Thanks for your help

    Post Author: crystalrook
    CA Forum: Formula
    I am adding a cross tab to an existing report so many of the fields are already in the report. I would like to only add the month fields and a count of the transactions. Can this be done?  In the group options how can I tell it to only use the last six months reguardless of activity for the month.  Current results are giving every date as a column.  Can I only get the months to be columns?
    Any suggestions?

  • Monthly Sales report of a given Year

    Hi Experts,
    I have a requirement that User enters Fiscal year in Selection Prompt, based on the year, user wants monthly sales  like
    Jan-2010 | Feb-2010 | March 2010 | ..........| Dec-2010
    How can i get this?
    My report layout is like
    Vendor nbr     Vendor name  201001  201002   201003  201004     201005     201006     201007     201008     201009
         201010     201011     201012     Grand Total of sales revenue                                                                                                                             
    Thanks
    David

    Hi David,
    Can you add a column for Year?
    If Yes, then you Section the Year column in the report. This will make the months appear below this specific year.
    Then put the prompt for the Year. So when the user selects the year (eg: 2010), he will get all the months under the year 2010.
    Thanks
    Niranjan

  • HT1695 I have owner my iPad for approx six months. I have been connected to the Internet from my home thru my Wifi with no problems. Suddenly four days ago I have not been able to get my IPad to connect to my home wireless. All other computers in my home

    To follow up on my question. Only because this is the first time I am using this forum.
    I have owned the iPad for approximately six months.
    I have been using the iPad at home thru my wireless network, no problems.
    In addition to my IPad I connect to the intent with my laptop, and my cell phone. No problem.
    Suddenly approximately five days ago I have not been able to connect my IPad to the Internet. Laptop and cell phone still connect.
    However when I leave my home I am able to connect my IPad from the Public Library and from Starbucks.
    Can anyone give me some advice on how to get connected from my home.
    Not sure how or when I can expect a response to this problem.
    Thanks
    Bill
    <Email Edited by Host>

    Thanks, however I am not familiar with the Sleep and Homekey buttons on my IPad.
    What I plan to do when I get home from Starbucks is, Settings/general/Reset/reset network
    I have rebooted my router no luck.
    Am I missing something on not knowing about the Sleep and Homekey?
    Thanks,
    Bill

  • Monthly sales ordr in alv

    hi,       i am facing a problem in creation of sales order for a particular sales organization where in i need the sales orders raised by customers of the sales organization in a report which shows the sales order number,material data in it,quantity,cost,but my requirement to display the sales month wise for all customers .for example what r the sales orders raised in january by all customers of  sales org should come under jan month,like what r the orders raised by customers in febraury in january month like this i need for a particular financial year ,my problem is i am unable to split the sales based on months,i am able to get all months sales order with out classification under one set.....if

    HI RAJ,
    this is sample code it may help u,
    u do like this pass ktab to alv u got list by monthly.
    but first field 'erdat' b/c we use this field i at end of.
    types : begin of ty_vbak ,
           erdat type erdat,
          vbeln type vbeln_va,
          end of ty_vbak.
    data : itab    type table of ty_vbak,
           ktab    type table of ty_vbak,
           wa_itab type ty_vbak,
           ty_wa_itaB TYPE TY_VBAK,
           TEMP(2) TYPE C.
    select vbeln erdat from vbak into CORRESPONDING FIELDS OF table itab
    where vbeln > 100.
    sort itab by erdat.
    LOOP AT ITAB INTO WA_ITAB.
    APPEND WA_ITAB TO KTAB.
    AT END OF ERDAT+4(2).
    CLEAR WA_ITAB.
    APPEND WA_ITAB TO KTAB.
    ENDAT.
    ENDLOOP.
    regards,
    chandu.

  • Select the table based on 2 months ? Query no working

    I have a table TEST1 in schema MESSAGE_REPORT. What i want to do is select the table based on 2 months ( JULY and AUGUST ). The requirement is Whole JULY data should be there and for AUG the data should be till 01 aug . Below is the query i m using but its giving me error . Moreover the Where clause "TRUNC(HIRE,'MONTH') " part is compulsary to be used ,changes have to be made in the ">= timestamp '2010-07-01 00:00:00' and frd.sent_timestamp < timestamp '2010-08-10 00:00:00';" part only . please can anyone help me out
    NAME        HIRE
    SALE     01.07.2010 00:00:00,000000000
    cops     15.07.2010 00:00:00,000000000
    NAVEED     31.07.2010 00:00:00,000000000
    HEN     01.08.2010 00:00:00,000000000
    BEN     10.08.2010 00:00:00,000000000
    CROSS     15.08.2010 00:00:00,000000000
    select * from MESSAGE_REPORT.test1 where
    TRUNC(HIRE,'MONTH') >= timestamp '2010-07-01 00:00:00' and frd.sent_timestamp < timestamp '2010-08-10 00:00:00';
    ERROR:
    ORA-00904: "FRD"."SENT_TIMESTAMP": invalid identifier
    00904. 00000 -  "%s: invalid identifier"
    *Cause:   
    *Action:
    Error at Line: 24 Column: 60Edited by: user12633486 on Aug 11, 2010 1:13 PM
    Edited by: user12633486 on Aug 11, 2010 1:51 PM

    Thats becuase you are comparing with Month and not the complete date.
    Check this:
    SQL> ed
    Wrote file afiedt.buf
      1  with t as (select 'SALE' col1,'01.07.2010 00:00:00' col2 from dual
      2  union all select 'cops','15.07.2010 00:00:00' from dual
      3  union all select 'NAVEED','31.07.2010 00:00:00' from dual
      4  union all select 'HEN','01.08.2010 00:00:00' from dual
      5  union all select 'BEN','10.08.2010 00:00:00' from dual
      6  union all select 'CROSS','15.08.2010 00:00:00' from dual)
      7  select * from t
      8  where
      9  TO_DATE(col2,'DD.MM.RRRR HH24:MI:SS') >= timestamp '2010-07-01 00:00:00'
    10* and TO_DATE(col2,'DD.MM.RRRR HH24:MI:SS') < timestamp '2010-08-10 00:00:00'
    SQL> /
    COL1   COL2
    SALE   01.07.2010 00:00:00
    cops   15.07.2010 00:00:00
    NAVEED 31.07.2010 00:00:00
    HEN    01.08.2010 00:00:00
    SQL>
    -- For less than equal to
    SQL> ed
    Wrote file afiedt.buf
      1  with t as (select 'SALE' col1,'01.07.2010 00:00:00' col2 from dual
      2  union all select 'cops','15.07.2010 00:00:00' from dual
      3  union all select 'NAVEED','31.07.2010 00:00:00' from dual
      4  union all select 'HEN','01.08.2010 00:00:00' from dual
      5  union all select 'BEN','10.08.2010 00:00:00' from dual
      6  union all select 'CROSS','15.08.2010 00:00:00' from dual)
      7  select * from t
      8  where
      9  TO_DATE(col2,'DD.MM.RRRR HH24:MI:SS') >= timestamp '2010-07-01 00:00:00'
    10* and TO_DATE(col2,'DD.MM.RRRR HH24:MI:SS') <= timestamp '2010-08-10 00:00:00'  -- less than equal to includes data for 10th august as well
    SQL> /
    COL1   COL2
    SALE   01.07.2010 00:00:00
    cops   15.07.2010 00:00:00
    NAVEED 31.07.2010 00:00:00
    HEN    01.08.2010 00:00:00
    BEN    10.08.2010 00:00:00
    SQL> Edited by: AP on Aug 11, 2010 1:31 AM
    Edited by: AP on Aug 11, 2010 1:32 AM

  • Why is photo booth giving a message saying no camera attached when it has a web cam? it did work okay when I bought the computer six months ago?

    Why is "photo booth" giving a message saying "no camera attached" when it has a web cam? it did work okay when I bought the computer six months ago?  

    I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
    You can't "copy" your photos to the "library manager", there is just no way to any such thing.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Past Six Months

    Hello,
    I am unable to work the following out:
    From a Part Transaction table, we have Part Qty and Part Date.  I have been asked to calculate the total of the qty for the past six months, based on today's date - this will obviously change every day.  I also need to calculate the total qty for the previous six months prior.
    So, to summarise I require :
    Today - 182 days = Total qty for past 6 months
    182 - 365 days - Total qty for previous 6 months
    Basically the result should change day to day as the date range's are based on the current date.
    I have been working with running totals and the date serial function but so far have not produced the desired outcome.  The problem seems tying in today's date to make it dynamic.
    Thank you in advance for any help received.
    Michael

    if i was in your place now, i would do it using free hand sql using "Add Command" option in Crysal Report, i  will write 2 SQL statements , one for the past six months and another for the perior six months, and i will use the master table to join the information with them
    like this,,
    View : PAST_6
    SELECT PID,SUM(PQTY) AS PAST_QTY
    FROM  PART_TABLE
    WHERE PDATE BETWEEN SYSDATE AND ADD_MONTHS(SYSDATE,-6)
    View : PERIOD_6
    SELECT PID,SUM(PQTY) AS PERIOR_QTY
    FROM PART_TABLE
    WHERE PDATE BETWEEN ADD_MONTHS(SYSDATE,-6) AND ADD_MONTHS(SYSDATE,-12)
    Table : PARTS_MASTER
    including the master information like PID,PNAME
    SYSDATE is DMBS keywords returns the current system date.
    ADD_MONTH is a DBMS function which add months to a specific date.
    since im using oracle, you can look wat matchs those function in ur target dmbs.
    join those 2 views and the master table in the table links.
    then add the data to the crystal reports desgin stage,
    hope you got the idea.
    good luck
    Amr

  • MBP repair time: SIX MONTHS !!!

    Dear All,
    I bought a MacBook Pro in April. It had an incredible number of problems (the most serious one was that the battery cover was melting and falling apart) so I SENT IT BACK for repair.
    Five working days later I received my laptop back, apparently fixed. Well, no such luck. It still had exactly the same problems. Why didn't they test it after they had "fixed" it?
    I called Apple After Sales support and requested a new replacement unit, since I argued that I bought a new laptop for which I had paid a lot of money, had sent it for repair, Apple didn't fix it, and I wasn't going to wait for another repair. So, they agreed to replace it.
    Guess what? They shipped the wrong laptop... The hard disk was not the one I had in my original laptop. So, I SENT IT BACK. Ten days later I received a new laptop with the correct configuration.
    Surprise surprise: the right speaker wasn't working properly. It vibrated a lot and made a tinny sound. And guess what... Yes... I SENT IT BACK yet again, in the hope that fixing a speaker was within the technician's capabilities.
    They promptly returned the laptop five working days later. The speaker was working, but they had disconnected the bluetooth module, disabled the remote control, and managed to break the light that indicates when the laptop is "sleeping". I was so frustrated... And yes... I SENT IT BACK, again...
    They fixed those issues, returned the laptop in five working days, and imagine my surprise (I was now laughing histerically!) when I find out the right speaker was broken, again!!! I could not believe what was happening.
    I SENT IT BACK for the fifth time. That was over 2 weeks ago. Still no news... The call centre don't have a clue of what's going on... First they told me they were waiting for parts, then they said they weren't waiting for any parts, then they said they had fixed the laptop and were now testing it, then they said they hadn't fixed it because they were waiting for parts, and never has anyone told me when I will have my laptop back.
    I WILL NEVER, EVER send my laptop back for repair. After all this history of waiting for it to be fixed I will just ask for replacement laptops from now on (for SIX MONTHS I've been waiting!!! It is October now and I bought my laptop in April). It has been in repair for 6 whole months while Apple has my 2500 pounds in their accounts since I bought a lot of accessories with the laptop so it increased the price considerably.
    If you count the number of times I wrote "SENT IT BACK" in bold in the text above, you will see I had to send it back FIVE times, and had TWO new replacement laptops, and I'm still waiting for it to be fixed.
    Yours truly,
    A frustrated customer who no longer believes in Apple's ability to solve technical issues in a thorough and prompt manner.
    MacBook Pro 2.16Ghz   Mac OS X (10.4.8)  

    WOW!
    And I thought I'd had problems with the MacBook I had about a month ago. I'd bought the £899.00 white MacBook from my local Apple reseller and was shocked to get it home and see that one of the USB ports was totally smashed and almost ripped out of it's socket. I returned it right away, got a refund (as they had no more stock and had no idea when they would have) and went to an actual Apple Retail Store.
    I got another one, got it home and both palm rests to each side of the track pad had scratches on them (one was almost two inches long), so it got returned. I got another one (which I checked out before bringing it home) and it seemed fine. After a single day of use, the top of the case melted above the optical drive, which (after it cooling and being turned back on the following day) casued the plastic to crack, making it impossible for a CD or DVD to be inserted, thus (you guessed it) it went back. As you can imagine, by this time, I didn't want another MacBook, so decided to pay more and upgrade to a MacBook Pro. Did that solve my laptop problems? Nope, as mine had a serious hard drive fault and the Apple logo on the rear of the screen had a crack through the centre from left to right, so (yes, I know you already know what I'm going to say) it went back.
    I thus decided to ditch the laptop route and go for a desktop. I currently have a 24-inch iMac and I have to say that I'm very pleased with it. I now have a larger spending budget than I had when I first bought the computer for my business and (as it's still within the 14-day return period) have thought about getting a MacPro and Cinema Dispay, but (after reading some issues regarding the MacPro on this very forum), I don't know if I dare, as I've only seen one or two good posts about it so far and the others seem to be full of problems (though I have to say that the MacBook Pro forum always seems to have the most problems and issues than any other section!)
    At the moment, I have no idea what to do and only five days before my return period runs out...any suggestions?

Maybe you are looking for