Play your iPhone through speakers with dock line out

I discovered this nifty feature today. I have some powered JBL speakers for my laptop that I usually plug in to the headphone jack. I saw that the iPHone dock has the "line out" connection and I wanted to try it out.
So I unplugged the JBL mini plug from the laptop and plugged it into the dock, put the ipHone in the dock, selected a song from the iPod, turned on my speakers and voila! My iPhone now plays through my computer speakers, but without the need to connect with the computer. Thank you Apple.

I tried this, too, and found it only works with the iPod part of the iPhone. I thought it would be a good way to use the speaker phone, or at least listen to voice mail. But, it doesn't work. Has anyone tried this successfully?

Similar Messages

  • Can you listen to your iphone through car speakers?

    How do listen to your iphone through car speakers?

    depends totally  on the car's audio facilities fitted as in USB Aux in etc etc .............

  • Can you play an iPhone through iTunes?

    I can see all my music on my iPhone when I plug it into my Mac at work - running iTunes - but I cannot play any of the music it as it's grayed out?
    Is there something I need to do to be able to play it - can I do that? -use iTunes to play my iPhone through my Mac on my desk at work?
    Both iTunes accounts are authorized to buy and play music with my one apple account name.
    Thanks for any input.

    Go to the summary tab of your iPod in iTunes. There should be an option to Manually Manage Music and Video, or something to that effect. Make sure that's checked. That may do it.

  • Is there a way to play your music through your laptop and the apple tv?

    Is there a way to play your music through your laptop AND the apple tv? I use my apple TV with screen sharing, but then there is no more sounds coming from my laptop. Is there a way to do this?

    on you laptop you will open itunes. up next to the play button you will see the little airplay symbol, you need to click that, press Apple TV, then select some music.

  • How do you manage photos if you lose the computer your iphone was synced with?

    how do you manage photos if you lose the computer your iphone was synced with?

    Are you talking about photos that were synced to your phone? If so, the photo sync is one-way: Computer to phone. Apple makes no provision to extract these photos from your phone, you'll have to use third-party software to do so. Note: photos synced to your phone were reduced in resolution for display on your phone, there is no way to recover their full resolution.
    http://www.wideanglesoftware.com/touchcopy/index.php

  • IPhone 5 screen is black, when I connect to ITunes it says "to allow access please respond to your Iphone". Impossible with a black screen, does anyone know what the prompt is?

    IPhone 5 screen is black, when I connect to ITunes it says "to allow access please respond to your Iphone". Impossible with a black screen, does anyone know what the prompt is?

    Hey 11doski,
    Thanks for the question. After reviewing your post, it sounds like the display has a dark screen. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPhone: Hardware troubleshooting
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • HT4241 can you play your xbox through this cable, on you mac 24"

    can you play your xbox through this cable, on you mac 24"

    can you play your xbox through this cable, on you mac 24"

  • Qosmio X770-11C - how to disable on board speakers when using Line Out?

    Hi,
    Is there any way to disable on board speakers when the line out is used.
    Currently if I plug in a cable to the hadphone socket and choose lineout on the realtek control panel, the sound is output to the line out as expected but also through the internal speakers.
    Is there any way to stop this, and only have sound going out through the line out?
    thanks
    Graeme

    If you want to hear sound on headset only you must choose Headphone option.
    Disconnect cable and connect it again. When you see small window on the screen where you can choose between headphone and line out options choose headphone and you will hear sound on external device only.
    In case you have disabled this popup dialog you can activate it manually. Open Realtek manager connect external device and when you see activated black point on the right side make double click there and change settings.

  • What if your stuck 2000 miles away from home and your kids have disables your iphone through entering the wrong passcode too many times ... and you do noy have your original synced computer with you ... and the phone says connect to itunes

    and it gets worse.. a computer you can use  when the phone is synced to a brand new download of itunes states .... needs your passcode to sync with itunes ???? help  iphone states connect to itunes - itunes needs passcode to sync with itunes - iphone states connect to itunes becuase ... passcode is locked out ..

    You will have to restore as new.
    iPhone and iPod touch: Unable to update or restore

  • Hear ring through speakers in docking station?

    Hi All. Love my iphone but don't like to carry it with me in the house. I miss calls because the phone's in another room and I don't hear the ring. If the phone's in a docking station with speakers, is it just the ipod functionality that gets piped through the speakers or the phone's ringer too? Can you put the phone on 'speaker phone' and send and receive calls while its in the docking station?
    Is there another way to boost the volume of the ringer?
    Thx.

    If you dock the phone it will ring both through the iPhone's speakers AND through the dock (at least my Sony alarm radio/dock works like that).

  • App to automatically play song currently playing on iPhone through iTunes?

    Hey, is there an app out there that would allow me to walk into my house playing a song on my iPhone through the earbuds, and have that song stop on the iphone and continue to play from that spot through iTunes? I often come home listening to a song, and want some way to continue that song through my home speakers without having to open iTunes, start the song, and drag the playhead to the same spot I'm at...I think this is a viable app idea if it doesn't already exist. It should be part of the iPhone software. "Automatic Proximity Sensing Music Zone Switching"
    Thanks,
    Sam

    i have no heard or seen anything like this. what you can do is use the 'remote' app to start playing a song in iTunes, and it should be simple to set this up.
    if anything, this would probably be easiest to add to the 'remote' app, if they haven't already thought about it.

  • I can't get any sound through speakers with monitoring on either - using imac with guitarlink audio interface

    I can't get any sound through my speakers with monitoring on - i'm using a behringer usg102 audio interface and garageband is recognizing the input - i just can't hear the output - any suggestions?  thanks!

    vickyfromla quinta wrote:
    i have the usb selected as the input device
    and the output?
    vickyfromla quinta wrote:
    but it won't allow me to set the input level.  when i try to move the slider, it automatically moves itself back to the far left side.
    that's not the problem:
    http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How do I play my iphone through my car stereo

    I want to play my Iphone 4S through my car Vauxhall Corsa stereo. There's no socket on the car stereo. Do I need to buy some hardware?

    The aux input works great if you don't need to control the iPod from the radio, I connect it this way routinely and have a separate charger when needed. The OP, however does not have an aux port.
    Using earbuds or headphones is illegal in most states and I know a few that have been ticketed for impaired/reckless driving. Get into an accident wearing them and you could open yourself up to lawsuits because its considered impaired hearing. Ignorance of the law is no excuse. You can't fight the impaired hearing thing, don't even think about it. Claim to be senile and they'll pull your license right there and you will be walking for awhile.
    Drive safe.

  • Setting up your iPhone to sync with 1and1 Exchange Server.

    _+*You *must have* iPhone firmware version 2.0 and higher to sync to Exchange Services+.*
    iPhone and 1and1 exchange work amazingly well. Most folks out there are still using the IMAP side of the 1and1 Exchange service. *"THIS IS NOT FULLY FUNCTIONING EXCHAHGE"*! Here is how to really set up your phone to sync Mail, Calendars, and Contacts with 1and1 Exchange accounts.
    From your home screen:
    1: Go to the settings control panel on your iphone.
    2: Touch the "*Mail, Contacts, Calendars*" tab.
    3: Touch the "*Add Account...*" tab.
    4: Touch the "*Microsoft Exchange*" tab.
    A screen asking you to "*Enter your Exchange account information*" will appear.
    5: type your email address attached to your 1and1.com exchange account.
    ex. "[email protected]"
    6: type your domainusername. Your 1and1 username is one that is assigned to you by 1and1.
    the username must be typed out in this manner: exchangee123456789
    *If you already know your 1and1 Exchange Username then skip to step 7.*
    Your 1and1 username starts with an "e" and its followed by nine numbers (ex.: e123456789). If you do not know this username you have to go to your Administrator panel at the 1and1 site,(Here is the URL to the admin page. *http://admin.1and1.com*).At the prompt enter your customer number *which is located on your monthly 1and1 invoice* followed by your password. if you have never seen this control panel you will have to sign in and get a password to access this area. Once in the Admin area under the packages tab click the url labled "*1&1 Microsoft Exchange*". You will now be in the *Administration Tab*. Now under the *communications tool* section click the URL labeled *"Microsoft® Exchange Account Overview"*. You will now see a list of the exchange usernames in that exchange package. Find your username and either print out the page or write the number down.
    7: type your 1and1 exchange account password.
    8: type a description that best corresponds with your 1and1 exchange account. As a suggestion you should type a description that makes your account stand out. "*ex. 1and1 exchange account*" (this will be helpful later in distinguishing what calendars come from which account if you are syncing multiple calendars.)
    9: touch the "Next" button at the top right of the screen.
    iPhone will connect with the 1and1 exchange server and authenticate your account. If the authentication fails check one of your entries then try again.
    10: once iPhone authenticates your account a field called "Server" will appear between the "Email" and "Username" fields. Enter "exchange.1and1.com" into this field.
    11: touch the "Next" button at the top right of the screen.
    12: Select which part of the Exchange Services you would like sync with your iPhone.
    ie. *Mail, Contacts, or Calendars*. (Simply slide the on or off switch next to the service you either wish to sync or exclude.)
    13: once you have chosen your services touch the "Save" button at the top right of the screen.
    iPhone will once again contact the 1and1 Exchange server. You will be returned to the mail settings screen.
    You are now done
    If you don't have any contacts on your iPhone just go look at your address book now. If you chose to sync your address book all of your contacts have populated themselves into your iPhone contacts tab.
    AWESOME
    Welcome to Exchange on the iPhone!
    Some thing to try to verify your Exchange account.
    1: Create a Calendar or Address book entree in your iPhone. Now watch it appear on your Outlook account.
    2: Tell a friend with Outlook to invite you to a calendar event. You will receive an invitation right there on your iPhone screen.
    Have fun and enjoy your new iPhone.
    +*I would like to thank all of the folks at Apple Computer for their time and efforts in making the iPhone the coolest phone/PDA/game console/business tool in the planet!*+
    Message was edited by: Angel Banchs
    Message was edited by: Angel Banchs

    Unless Apple decides to license ActiveSync from MS, this will not happen.
    Apple hasn't done so since OS X was first released for whatever the reason or reasons and although always/never should not be used, I'm not sure how likely this is.
    I venture to say that Apple is well aware that the iPhone is limited to business use as is - at least for those with an Exchange account - with a company or IT department not willing to enable IMAP account access for email accounts. Initially, the iPhone was not designed nor intended for the enterprise/business market as is a Blackberry, Palm or Windows Mobile device. It is obvious from the commercials that the focus - at the present time anyway, is as a consumer device. The iPhone/iPod Touch SDK scheduled to be released on March 6 may change this but what will come out of the SDK and when is unknown at this point.
    If you need to access your Exchange account with the iPhone and your company and IT department refuses to enable IMAP account access, there are no workarounds for this. There are ways to make accessing an IMAP account secure by requiring SSL for the incoming and outgoing mail servers and the iPhone also supports VPN - virtual private network access which is secure.
    Other than that and you don't want to keep the iPhone for personal use, it is probably best to return it and wait until after the SDK is released to see what may turn up.

  • How do you sync your IPhone's ICalendar with the ICalendar from your mac?

    I am having trouble figuring out how to export the calendar on my computer (a mac) with the calendar on my IPhone 4. When I plug in my IPhone to the computer, it does not show up as an option to export on the ICalendar.

    You don't need to export.
    Connect your iPhone to Mac's iTunes
    Select your iPhone in iTunes under DEVICES
    Choose the Info tab
    Select Sync iCal Calendar. (CHECKED)
    Click Sync button bottom right, done.

Maybe you are looking for

  • Can't open AW5 files in AW6.2.9

    I have an iMac running Appleworks 6.2.9 and cannot open files from an old Powerbook G3 that were created in AW 5.0.3. Everything I've read says this shouldn't be a problem. When I open the folder I put them into it shows the file name but does not as

  • Cannot open as app in Windows 8

    I've updated my Skype and am frustrated that I cannot use it as an app in my Windows 8.  When I tried to open the app it its only function was to tell me to download the new software.  I used to be able to drag the app to the side so I could view it

  • TS1368 My iTunes store switched itself to the Italian store somehow. How do I turn it back to the American iTunes store?

    How do I turn it back to the American iTunes store?

  • Labview.ex​e generated error

    "I am using LabVIEW 6.1 in windows 2000. I downloaded the Agilent3499A IVI from the website and configured the driver and everything. When I run the Initialize.vi, I have this following problem. LabVIEW.exe has generated errors and will be closed by

  • Applescript icon not bouncing

    I've recently purchased an iMac with OS10.4. The scripts from my previous machine using OS10.3.9 are working, but the applescript icon does not bounce when there is a problem running the script. I use the bounce to let me know when there is a problem