Please note, your reply will need to be approved by a moderator before it is posted in the forum.

That has never happened to me before.
Interesting to say the least. I was merely responding to able123 in a discussion about the Creative Cloud's usage in a non-connected environment.
Very odd.
I look forward to seeing if it is approved or declined. And how that information comes to me.

Steven,
This HAS happened to me, and on several occasions.
There are certain "trigger words," that flag a post. I have never seen a list (and I would assume that it changes often, due to the work of spammers), but have managed to find a few, accidently, when I tried to post a simple Reply. In every case, my usage was legit, so the posts were all approved.
Last one was really difficult to locate, in a rather large post, but John C. (Adobe-Admin) finally found it. Cannot recall what it was now, but I would never, never have thought that it would be flagged.
Thanks to the spammers, but at least our posts do seem to make it through Moderation.
Just be a bit patient, and the MOD's will give you a pass, and a post.
Hunt

Similar Messages

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Please share your IPv6 information needs.

    Are you implementing IPv6 in your network? Please share any of your IPv6 information needs here. Also share any comments you have on the IPv6 Knowledge Base Portal.

    Hi John
    If it's like previous years, you can register for as many sessions as you want, providing there are no clashes as you can't register for sessions that conflict or overlap with previosly booked sessions. It's always worth booking for those sessions that are of interest as some often fill and if you're not registered, you're forced to wait in a standby queue and might miss out entirely.
    I only know as much as you do now regarding when the schedule builder will finally be available in that it's due sometime in July (which doesn't have too many days remaining).
    Now my sessions will obviously fill quickly so make sure you book early or you might miss out ;)
    Cheers
    Richard Foote
    http://richardfoote.wordpress.com/

  • HT5312 i could not follow anything, it needs to be clearer, and i all i wanted was to find the answers to my questions, you told me how to make an itunes account. and i'm pretty sure the questions used to be "first teacher" and "favorite teacher"not partn

    HELP i just could not figure out how to find the answers to my security questions, and i do believe that the questions used to be "who was your first teacher" and "who was your favorite teacher" but now the second one is "where did you and your partner go on there first trip together, so now i'm wondering if i dont even have the answers anymore! why, have you changed the questions, and i really am having trouble following the help pages. i need help, it wont let me buy any songs or apps, so i've been saving the links and names to songs.

    We are fellow users on these forums, you're not talking to Apple or iTunes Support.
    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use.

  • HT4718 Upgrade to OS X Mountain Lion and my computer keeps restarting! Can you please tell me what I need to do to fix it so I can use it.  The only way I can get in is by using Safe Mode :( Please help

    Help
    I upgrated my computer to OS X Mountain Lion last night and since then my computer keeps restarting over and over again.  The only way I can use it is by being in Safe Mode.  Can  you please tell me what I need to do so my computer works perfectly again.
    Thank you

    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select  
    View ▹ Show Log List   from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • DO we need to run Info Package every time before DTP Process to load the da

    Hi friends,
    IN BW 7.0 do we need to run every time the Info Package before DTP process to load the data into target or only one time we need to run the Info package then from that point onwards we need to run DTP process, Please let me know. basically I am planning to create the process chains so I should put Info package before DTP to load the deltas or full load??
    Thanks a lot,
    Harshan

    Hi,
    When you are loading from source system i.e. datasource to target, you will always have to use an infopackage to load to PSA and a subsequent DTP.
    When loading for instance from DS to Cube, you only need to schedule a DTP.
    I hope this helps you.
    Best regards,
    Olav

  • Posting on the forum from your Palm PRE

    Long time Palm user here. I really want to love WebOS.
    This post was meant to be about losing my ability to download and save most podcasts. Due to a bug/glitch/flaw in the pre and in combination with how some sites work this has become impossible. (we are due for a fix any day now?)
    But JUST attempting to post on this very forum turned out to be nearly impossible, from the Palm Pre.  
    Have you tried it? See what happens.
    As soon as you begin to type in the text field the browser app automatically shifts focus to the top left corner. Meanwhile, as I type this in the Memo app to copy and paste later, the browser has inevitably gotten lost in the horrible memory shuffle and will have to refresh when I try to return to it. 
    Think we can get a fix for this minor browser annoyance?
    All the little things are adding up to a really frustrating experience. I just have to ask. I can't be the only one having this much a frustrating experience with this phone? 
    Will "too many cards" be a permanent feature of the Pre hardware?
    Slow! Will there be any speed enahncements in future updates? Is this even possible?
    Email is practically unusable at times for how slow it can be.
    Between lockup/slowdowns and the phone being stuck in headset mode a simple phonecall can be quite a task.
    I could keep going, I'm sure you've heard all this by now,to be honest I just felt like venting my frustrations.

    Hello and welcome to the forums;
    The issue with the browser moving when typing in a text entry field has been forwarded to our engineers, and may be resolved in a future update. We appreciate all the assistance of everyone who has brought this to our attention in the past.
    TreoAide

  • I'm missing the "foxfire" button. It's simply not there and I need to re-import my IE favorites, but I can't becasue the new upgrade forces you, (me), to use a button that simply is not there at the top left where it should be but isn't.

    Well that's pretty much it. The foxfire help page, now that I've upgraded to the newest version says to look for the "foxfire" button at the top left which would be located in the blue bar that instead still tells me what the name of that particular page is that I am viewing, just as it always has but there is no "foxfire button there for me to click on in order to get my bookmarks, my favorites re-imported from IE version 6.0. I actually installed them via the instructions under foxfire version 6.0 a month ago originally without any problem, and then again on version 7.0 after I recently rebuilt this machine using windows 2000 professional and everything got imported Okay except for one file... And of course it was the most important folder, my favorites folder which I had named "business" because it was the folder which contained all my links that I need for "business". So naturally, I am eagerly awaiting a reply to tell me what it is that I need to do. Could it be as simple as I have not re-booted since I upgraded earlier today/yesterday? That actually IS a possibility I suppose because I don't remember re-booting afterward or being told to in or after the process of upgrading. After the upgrade, there simply was not any indication that I needed to. (As I recall anyhow!) It's currently one in the morning and that was twelve hours ago. But I honestly don't think that I was instructed to after clicking on "install" the new version. But if it did tell me to afterward, I'm sure I must have even though I don't remember it as my extensive history with personal computing and installing everything from hardware to software including operating systems tells me that if it had told me to re-boot, I would have.
    Thank you in advance,
    Eric G.

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • When I click on the gold bookmark icon, the pop up menu does not appear that will let me put tags, folder info etc. How can i get the pop up menu to appear?

    After I click on bookmark icon & it turns gold, the pop up menu that lets me add tags, folders, etc doesn't come up.

    What happens when you click the star (now colored gold) a second time? See the steps in the process of adding a bookmark by the method you are using. Step 1, step 2....
    See: http://support.mozilla.com/en-US/kb/Bookmarks#Making_new_bookmarks

  • Error: Static content was not deployed. Please ask your system admin

    One of my users is getting the following error Static content was not deployed. Please ask your system administrator for assistance.
    Has anyone had this before or does anyone know what this is referencing. This happens each time she runs a report and the report does not format correctly.
    At the moment it only looks to be her but i dont think this is system settings as she is running Citrix and all other existing users on Citrix are not complaining.

    JE,
    I've seen it, it happens randomly to some users and no others, we saw it last year for a few weeks then it stop and restarted again in Jan then stopped again. Log a call with CC and give them this CR# 12-1QK0RRZ, the last update I have on this is "Understand that this will require some code changes before its fixed .However, I am unable to provide you an estimated time of implementation at this time. I will update you as soon as I hear more on this one." but that was in March.
    2 things it doesn't happen in Firefox if that is an option for the user AND we found if you signed into staging then back into prod it made it go away, dont' ask me how or why but it seemed to work for us.
    good luck ;-D
    Alex

  • This account has not yet been used with itunes store.Please review your account information

    I get this message everytime I try to sync my iTunes to my iPhone "This account has not yet been used with itunes store.Please review your account information" When I originally bought apps I used my dads iTunes account, but my dad recently passed away and his accounts have (or should have) been closed. I just recently set up a new Apple I.D. and tried to use this, but that's when I get the message.
    iTunes authorization automatically defaults to my dads Apple I.D., so I enter my new I.D. and the message appears "This account has not yet been used with itunes store.Please review your account information".
    I'm frustrated, any ideas? I really don't have the money to pay Apple to fix this!
    Thanks

    I changed my dads password, then went back to sync my apps and when it came to the Authorization, I entered his account name and the new password (which was by the way accepted and changed correctly) to have it come up on the screen as the incorrect password...REALLY!!! I went back and changed the password again...guess what? Same result "inncorect password".
    As I mentioned my dad PASSED AWAY, there is no way I can ask him what his password originally was, i can't accesses his email account as it no longer exists.
    What am I supposed to do, this is very frustrating.
    If I use my new account that's in my name, the Authorization screen just keeps asking for my Dads account.

  • TS1398 I cannot activate my iMessage on my ipad. I get a message that says "Could not sign in. Please check your network connections and try again." But my internet and browsing works great.  I don't undersand. Any ideas of what to try?

    I am trying to activate iMessage. I receive a message that says "Could not sign in. Please check your network connection and try again." I connection is strong. I can browse the internet but cannot connect to iMessages. I don't understand. Any ideas.

    Turn iMessage off and then on again, wait a few minutes.
    Turn Airplane mode on and then off again, turn iMessage off and then on again, wait a few minutes.
    Make sure your iPad is on Wi-Fi, reboot your iPad, turn iMessage off and then on again, wait a few minutes.
    Wait and try again later -- Apple's servers can get overwhelmed or experience outages just like anyone else's.

  • Facetime could not sign in. Please check your network connection and try again.

    Can anyone help me, I can't use my Facetime as I enter my Apple ID it keeps coming up with "Facetime could not sign in. Please check your network connection and try again." but my network is ok and can access the net. My apple ID works fine with iTunes and Apple TV and my iPad so I am at a loss.

    Hello
    Try this... I had the same problem and this worked for me.
    Go to your system preferences → network → make sure WI-FI selected → advanced → DNS tab. Add 8.8.8.8 to the DNS servers. Go back to FaceTime and try to verify your account again. Let me know if that works.
    Good luck!

  • A recent Foxfire upgrade no longer allows my McAfee to show site status (if the site is safe or not) on Google searches. This is unacceptable. Please resolve or I will switch to Internet Explorer.

    Foxfire said that there is no compatible match. It is unacceptable that Foxfire cannot integrate with McAfee. Please fix or I will have to switch to using Internet Explorer.

    Extensions for Firefox, such as the McAfee tool, include a list of compatible Firefox versions. You can ignore add-on version restrictions by (what else) installing an add-on. Then you can test whether the McAfee one actually works in Firefox 5.
    [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter :: Add-ons for Firefox]
    Please report back on your results.

  • Facetime Could not sign in. Please check your network and try again.

    Hi,
    I am using IPad Mini and was able to use Facetime without any issue. All of a sudden I started getting this error. My Apple ID is verified and though I go back into facetime through settings and re-enter my user-id and password, it does not work at all.
    I also noticed that my IOS is updated to 7.1 through automatic update. I think the update has affected the settings. I am able to use other apps that connect to network without any issues, but facing this issue with facetime.
    Any suggestions would be of great help!
    Thanks
    KV

    It may not be an issue at your end.
    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Unfortunately, we may have to wait until Apple is more forthcoming with information.
    http://www.apple.com/support/systemstatus/

Maybe you are looking for