BPEL Designer Download Exlipse Plugin Fails to Install

BPEL Designer Download, Eclipse Plugin Fails to Install
When installing the .exe, the download does not identify the proper version of Eclipse. It fails stating that the version required is at least 3.0, which is the only version install on my computer
Anyone have any ideas?
Thanks.
-dave
404-661-6767

You should probably post this in the BPEL forum to get an appropriate response: BPEL
OTN

Similar Messages

  • BPEL Designer Download, Eclipse Plugin Fails to Install

    BPEL Designer Download, Eclipse Plugin Fails to Install
    When installing the .exe, the download does not identify the proper version of Eclipse. It fails stating that the version required is at least 3.0, which is the only version install on my computer
    Anyone have any ideas?
    Thanks.
    -dave
    404-661-6767

    David,
    This might be caused by the fact the fact that you have the platform version of eclipse. BPEL PM requires the SDK version (full download ~87MB).
    Edwin

  • Where is BPEL Designer download?

    White papers and tutorials all say to check otn.oracle.com/bpel to find both needed files BPEL Process Manager and BPEL Designer downloads to run through tutorials. Process Manager link exists but page has no link to BPEL Designer. Where can this download be found?

    Hi,
    In its current incarnation (RC8 release), the BPEL designer and the BPEL server are combined into one downloadable package. This will change with the RC9 release that will go out later this week.
    Note: The current RC8 release of the resigner only works with Eclipse M9-RC2 (NOT GA). That incompatibility is addressed within the RC 9 delivery.
    If you have any additional questions during your evaluation of our technology, please submit a request to the BPEL forum:
    http://otn.oracle.com/bpel
    Best,
    Edwin

  • HP downloaded printer software fails to install

    Anything that I print (to my HP Photosmart 6520 Printer) on 4x6 photo paper (from my HP computer with 64 bit Windows 7) are printed approx. 1/2 inch off-center.
    I downloaded the following update hoping that it would correct the problem.
    HPCOM_292008_HPPS_6520_x64_000_003.exe
    The update would not proceed but gave me the following message:
    1. Check that your device is:
     - Connected to your computer (It was)
     - Powered on (It was)
     - Not in an error state (It was not in an error state)
    2. Clear any error states (There were none)
    3. Click Start Again
    Any ideas as to why it will not install?

    Hi EvelynMae,
    Welcome to the HP Forums! I see that, your HP Photosmart c4380 software is failing to install on Windows 7. I am
    happy to help you with this issue! I have a couple of questions for you:
    Can you make copies with the printer?
    Is the power cable plugged directly into the wall, or a surge protector? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    In the meantime, I would try uninstalling the software, and then re-installing again, using the HP Printer Install Wizard for Windows.
    Hope to hear from you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • What next? Photoshop CC download, Application Manager fails to install

    I have Photoshop CS6 already installed.  I am trying to also install Photoshop CC.  I am running Windows 7, 64 bit.  I went to the CC download site, clicked on Photoshop download, and the Adobe Application Manager started to update.  After several minutes I received the following error message: We've encountered the following issues: Adobe Application Manager failed to install."
    I tried this first using Chrome and then again using the Explorer browser.  Both failed.  What can I do next?!

    Rename OOBE to OOBE_old located at C:\Program Files (x86)\Common Files\Adobe (64bit)
    Relaunch the Browser
    Go to https://creative.adobe.com/products/creative-cloud
    Sign in with Adobe ID and password and download CC desktop app.
    Note: In case it doesn't resolve the issue. Please revert the OOBE_old to original name.

  • Adobe CS5 Design Standard - Some updates failed to install

    I am tying to find a solution to this problem, and am unable to find a way to contact Adobe directly for customer assistance. When I click on the Customer Support link at the bottom, the page that loads says, "Error 'This serial number is not for a qualifying product...' when installing an upgrade or upsell."  I didn't install an upgrade version of CS5, and I didn't have it on more than one computer. My hard drive crashed at the end of 2013, and I had to replace it with a new one. I wasn't able to deactivate the product on the old hard drive, but it installed just fine on the new one. Now the updates will not work.
    Does anyone know how to fix this or how to contact Adobe directly for help?  Thanks.

    I am also experiencing this same issue. I purchased the CS5 Master Collection in 2011 and it is now failing to install updates. My Adobe Application Manager is giving me the same error messages that you are getting. The Customer Support link takes me to the same website. Adobe Support just told me to come on here to find the answers that I seek because CS5 is no longer supported by support specialists. It's pretty discouraging to see that nobody has answered you since you posted this in July.

  • Plugin Fails to install to remote host OEM 12c R2

    I am trying to get a couple of plugins to deploy to some remote hosts, but they are failing. I did the initial agent install to the servers with no problems. Now I am trying to add the Oracle Database plugin, and the E-Business Suite Plugin now. I have successfully done this before on another OEM install. Here is the output log I see:
    Calling the validateRuntimeParameters method
    PluginDeployonAgt: Plugin Deploy on Agent : validated parameters
    The target_guid is CB189EA727EA205C077F7FC2F853287B.propName : OracleHome
    propName : AgentState
    PluginDeployonAgt
    Plugin Deploy on Agent - oraHome /u01/app/Agent12c/core/12.1.0.2.0
    PluginDeployonAgt - emStateDir /u01/app/Agent12c/agent_inst
    The plugin details are :
    Agent url oracle.apps.ebs
    pluginId 12.1.0.1.0
    pluginVersion 0
    pluginRevision DISCOVERY
    pluginType {4}
    action {5}
    operCode {6}
    errorCode {7}
    errorMsg {8}
    The exception has occured java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission putFile)
    The plugin details are :
    Agent url oracle.apps.ebs
    pluginId 12.1.0.1.0
    pluginVersion 0
    pluginRevision AGENT
    pluginType {4}
    action {5}
    operCode {6}
    errorCode {7}
    errorMsg {8}
    The exception has occured java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission putFile)
    The exit code is -1
    I have tried resynchronizing, stop/start agents, stop/start OEM, and went as far as rebooting the OEM server. I have not tried removing the host, and agent, then trying to reinstall it.
    Any thoughts, suggestions? Thanks in advance.

    Hi,
    I have the same problem when i try to deploy patch 16466443 on remote agent via Plan.
    Step: GetHomePatchMap Error
    PatchList : 16466443
    TargetName : ------:3872
    [Apr 28, 2013 6:04:22 PM] Command Arguments:
    /oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch checkComponents -phbasedir /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invPtrloc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
    [Apr 28, 2013 6:04:22 PM] java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission performOperation)
    [Apr 28, 2013 6:04:22 PM] Unexpected Exception: null
    on the server, this command works correctly:
    oracle@xxx $ /oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch checkComponents -phbasedir /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invPtrloc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
    Oracle Interim Patch Installer version 11.1.0.9.10
    Copyright (c) 2012, Oracle Corporation. All rights reserved.
    Oracle Home : /oracle/agent12cr2/core/12.1.0.2.0
    Central Inventory : /oracle/oraInventory
    from : /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
    OPatch version : 11.1.0.9.10
    OUI version : 11.1.0.9.0
    Log file location : /oracle/agent12cr2/core/12.1.0.2.0/cfgtoollogs/opatch/opatch2013-04-28_19-02-03PM_1.log
    Invoking utility "checkcomponents"
    The input patch(es) "[16466443]" can be applied to the following homes (1):
    /oracle/agent12cr2/core/12.1.0.2.0
    The input patch(es) "[16466443]" can be applied to the passed homes by the following command(s):
    /oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch napply /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invptrLoc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
    OPatch command 'checkComponents' done.
    OPatch succeeded.
    The error occurs when I try to put any patch on the agent through the Plan
    somebody decided this issue?
    Edited by: 999966 on 28.04.2013 7:02

  • Linux sgd plugin fails to install

    Having consistent problems getting the linux plugin to install from the sgd server. The .tarantella directory is created, but the ttatcc binary is not installed. I can install the ttawebtop, but this does not provide the desired functionality with the Firefox and Mozilla browsers. My linux users are on FC 5, SuSE 10 and SuSE 10.1. Jave 1.5 is installed on all Linux clients. There are no issues with the windoze plugins.
    -damon

    I've found this same behavior. I've managed to track the helper install problem down to a difference in the syntax of "tail" between FC4 and FC5.
    The helper downloads itself as a shell script and then tries to execute itself. The script tries to use "tail +13" to skip the beginning text, but tail no longer supports this syntax on FC5. The correct syntax is now "tail -n +13". I'm not sure if this change was intentional or not.
    I've managed to tweak around and force the helper app to install, but even then it doesn't work properly. The window that comes up to enter username/password won't accept any keyboard input, so we appear to have two problems at work here.

  • Design Premium CS4 Dreamweaver fails to install

    Purchased and downloaded installer for Design Premium CS4 upgrade. All programs installed except Dreamweaver. Launched the installer again and Dreamweaver is listed under "Additional Products" and I am unable to click check box next to this for installation. Since all other programs installed (Flash, Fireworks, Illus, InDesign, Photoshop) I feel this must be the right installer. Help. Thanks

    Alan,
    Installation issues are handled by Adobe customer service at no charge.
    Neil

  • Why do so many downloaded Adobe programs fail to install???

    I have downloaded two programs (paid for), Adobe Premiere 8 and Lightroom 3 on two different computers with Windows 7 64 bit. On each of them I get the same error message when I try to install: "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder." This is absurd. I have 500GB free on the drive and there are no write problems when installing other programs. Why are Adobe programs screwing up?

    I am having the same problem. What's worse is that when I search this forum I see many people have this problem and nobody bothers to answer them. Why
    is it so hard to install these products? Software from other companies can be installed quickly and easily, so we know it's possible.

  • QuickOffice Pro fails to Install on Symbian Anna

    I have a Nokia N8 with Symbian Anna. I purchased QuickOffice Pro from Ovi Store and it downloads but then fails to install. The trial version from the QuickOffice site also fails to install. Before I purchased QuickOffice I deleted the version of QuickOffice that came with Symbian Anna.
    Now I am left with no QuickOffice even though I have paid for it.
    Can someone suggest what I should do so I can install the QuickOffice Pro that I have paid for.
    Jen
    Solved!
    Go to Solution.

    I emailed quickoffice tech support and they gave me a solution that works.
    My unit is a C6-01 that I recently updated (successfully) to symbian anna including the 2 updates that came later.
    Here's how I did it as per their advice:
    Before you start, download the .sis file for the quickoffice pro version 7 (39) that you purchased from Quickoffice. You will use this later.
    1. backup your phone using nokia ovi suite, if you want to shorten this, backup only the important data like phone contacts, device settings, applications settings, calender etc. You can do away with the backup of music, picture and video files as those take time.
    2.  reset your device as follows which I quote " At the main screen, enter *#7370# – The default lock code is 12345. This will restore the device to its original state, removing all user data, contacts, and third-party applications you may have installed."
    this will tell you that the reset will also erase the contents of your memory card, if you dont want your memory card erased, remove it before resetting, then proceed to resetting.  If you have entered your own lock code, use that instead of the default lock code 12345.
    after you enter the lock code, the phone will shut down and reboot with a white screen only. Wait for it to compelete as it takes some time.
    3. After the resetting is complete, all softwares that you installed will be temporarily gone (since you took out the memory card) but you can recover it later.
    4. connect your cell to your PC and use Nokia Ovi suiet to install the Quickoffice pro 7 that you downloaded.
    this should install the quickoffice pro successfully. 
    Check if the quickoffice pro is working.
    5.then re-install your memory card which you removed in step 2.  The restore the contents of your phone using OVI suite.
    6. Finally, update your phone software using ovisuite.  It will say that it has 2 or 3 updates pending.  Just proceed with the update since that update will not erase the quickoffice pro that is already installed.
    that's it. you should have a working copy of QUickoffice pro 7.
    PLEASE TAKE NOTE:  This worked on my Nokia C6-01 updated to Symbian Anna.  I cannot speak for other nokia models.
    I hope this helps.

  • Help App update failing to install

    For some reason my iPad 2 iOS 7.0.3 (11B511) is having problems with the latest update to the Twitter App, taking it to version 5.12.  Whatever I do the App running on iPad continues to operate Twitter version 5.11.1
    The update to 5.12 does appear. I click to download, it appears to download but it fails to install.  There is no error message to give a clue to the cause of this problem.
    iPad has 8GB of available space. This is what I have tried so far ... None of which have solved the problem.
    1.  Completely closing the Twitter App and the App Store. Deleting the Twitter App, re-booting iPad and then reinstall from the App Store App, which displays under Purchased Apps, Twitter v 5.12.  Despite this it installs v 5.11 then offers the update, which appears to go through the motions of downloading and installing, but when I check the App it is still operating v5.11 as the enhancements included in v 5.12 are not there.
    2.  Checking the App Store App updates Tab shows Twitter v5.12 with an option to Open. Once again this only opens v5.11
    3.  I have tried deleting my Twitter Account and repeating this process, all to no avail.
    4.  I have also tried deleting the Twitter App from iPad, which should remove all of its data in theory.  Then going to iTunes on my PC, and  downloading version 5.12. Then syncing iPad with iTunes and installing Twitter from there, but it still stubbornly insists on running the previous version.
    This is very frustrating ... I also have an iPhone, running iOS 7.0.3 (11B511) Twitter version 5.12 has installed on that with no problems.  I particularly like the picture previews which this update to Twitter brings and would love to have this facility on iPad too.
    Is there a fix to this problem with the failing update on iPad?  Help appreciated.

    Hi CalAmity,
    Which OS are you using? Also let us know the exact error message?
    Additionally you may try to apply the updates manually:
    Win: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    Mac: http://prodesigntools.com/adobe-cc-updates-direct-links-mac.html
    Kindly follow the very important instructions before download.
    Regards,
    Romit Sinha

  • Wifi update fails to install

    T60 2623D6U, XP sp3
    Got an optional update from system update this morning,
    called Intel Wireless Wifi link for Windows XP
    It downloaded ok but failed to install (tried twice) with the following error:
    This product cannot support downgrading the version
    from 13.01.1000 to 12.04.000
    Please uninstall product and try again or contact
    product vendor.
    Any suggestions welcome.

    Yes, I have just had the same problem on my Spectre X360

  • OS X 10.5 refuses to shut down & fails to instal updates ...

    iTunes 7.5
    Quick Time 7.3
    iPhoto Update 7.1.1
    Repeatedly available software is downloaded automatically but fails to install
    as during restart OS X 10.5 fails to shutdown ( Blue Screen Loops ). Forced
    shutdown and restart fails to install previously downloaded updates. How do
    I resolve this issue? OS X 10.5 is pretty useless with out updates and restarts.
    [email protected]

    mimeismoney wrote:
    Clutch marketing move, Apple. Way to straight up demand money for an update.
    Snow Leopard (10.6) is not an 'update', but a newer Operating System than Leopard (10.5).  Apple like Microsoft does not charge for updates but does for newer Operating Systems. 
    It is a common business practice that allows for the development and sale of newer products.  Without the benefit of revenue income, newer Operating Systems would cease to be offered.
    Ciao.

  • Bought a new iMac 27" yesterday.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

    I bought a new iMac 27" yesterday, running with Mavericks OS.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

    update manually,:  http://www.adobe.com/downloads/updates/

Maybe you are looking for