PM order reservation item Category - L cannot be used

Hi Expert,
I done following config last 22 years i don't any issue in PM order Componant reservation.
Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>General Data>Define Default Values for Component Item Categories(L),
But now i'm facing problem while creating PM order. Materil category cannot be used with item category L.
Please helpto resolved this issue. Thanks
Manoj

HI PeteA,
Thanks for your Respose
Actually when we creating the PM Order in Component Tab - If we put Material No . Item Category and plant is flowing automatically. But now when we are creating order and when we insert component and enter it gives error massage as "Material type cannot be used with item category L
Message no. CO135"
Though we insert Item category and plant not allows to do Reservation.
One more i check in SPRO-Plant Maintenance and Customer Service-Maintenance and Service Processing-Maintenance and Service Orders-General Data-Define Default Values for Component Item Categories-ZERS 1100 L
ZERS 1101 L
ZERS 1102 L
ZERS 1103 L
ZERS 1104 L
ZERS 1105 L
ZERS 1106 L
ZERS 1107 L
ZERS 1108 L
ZERS 1201 L
ZERS 1301 L
ZERS 2101 L
ZERS 2102 L
ZERS 2201 L
ZERS 2301 L
ZERS 2401 L
ZERS 2501 L
ZERS 3101 L
ZERS 3102 L
ZERS 3103 L
ZERS 3104 L
ZERS 3201 L
ZERS 4101 L
ZERS 4201 L
After that it not allowing to do reservation.
ZERS is Spare Part (Engineering Component)
Thanks for your Quick response.
Manoj

Similar Messages

Credit Check while creation of Sales Order for Item Category Purchase Req

Hi Experts,
We are creating Sales Order using an Order Type ABCD for a material 1000. While creating Sales Order, we use Item categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO).
Credit Check settings are there at Order Type ABCD as well as all the Item Categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO). We are trying to test a scenario where a customer does not have enough credit limit while creating a sales order.
When we create a sales order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP), credit check fails because our customer does not have enough credit limit, so that Sales Order gets created and Delivery does not get created (This is what we want), then we go into VKM1 manually and relase the sales order and then if we go to VA02 and check the status of the Sales Order, it says sales order status is complete. My Sales Team is saying here also Purchase Requisition is getting created.
When we create a sales order for Item category ZOBO, it is going into Purchase Requisition screen. Once we give another plant in the create purchase requisition screen and save it we are getting a message that cannot create Purchase Requisiton because of Credit Block.
The settings were same for all the Item categories.
1) What made difference to complete Purchase Requisition for Item Categories (ZOVD, ZOVB,ZOST,ZOVP) and not for Item Category ZOBO when my customer is not having enough credit Limit.
2) Why Purchase Requisition screen is not coming for us when we create an Sales Order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP). We only get Create Purchase Requisiton Screen for Item Category ZOBO.
Thanks
Rajanikanth

Hi,
None of the Item Categories has Create PO Automatically.
Thanks
Rajanikanth

Sale order with item category TAN not getting displayed in md04

Hi,
We have a sale order with item category TAN, Schedule line category CP, MRP type ND and availability check as 07. This is not getting reflected in md04. But item category TAB gets displayed under the PR number.
Please let me know what checks to be made or changes to be done for the sale order with item category TAN to get displayed in md04 screen
Thanks & Regards

Hi all,
I changed the MRP type to PD, and from the next sale order, line item onwards, it was getting displayed in md04 screen. The already created one anyway dint get reflected. So I had to delete the line item and create a new one.
Thanks all for the help
Regards,
Jegashree

Name of table for   order Vs item category

Hi Experts
What is the table or Function module   to get the list   of   service orders with reference to   item categories used in the line item .
Eg : List of orders with   item category "ZSR3"
Here my input will be item category "ZSR3" and the out put expected is the service orders which contains the item category - ZSR3.
Regards
Raj

Hello Shantala
thanks for the response
I checked both tables , but   i do not find the field for item category in the table . hence not able to   get details of order Vs Item category.
Regards
Rajesh S

MD04: Unable to see Purchase Orders with Item Category S

Hi,
Whenever we create Purchase Orders with Item Category S (3rd party), they are not visible in MD04 Stock Requirements list.
Is there anyway we can get the Item category S Orders to be displayed in the MD04 list?

Hi,
I am unable to see Third party POs with open quantity also.
If I create a PO with blank item category (i,e to stock, it will show in MD04)
but if i create PO with item category S (it does not show in MD04)
Can you suggest how we can get item category S POs to be displayed in MD04

Subcontracting Order with Item Category L from Sales Order

Hi ,
I am looking for the way to create an Purchase requisition automatically from a sale order with Item Category "L" Subcontracting.
I tried but it is creating a PR with Item category "S" Third Party.
Can any body tell me where I am missing.
Thanks ,
Lekhram

Hi,
From the sales order look at your schedule lines to find which Schedule Line category is being called for your master data and document type of Sales Order.
Go to config for schedule line category and change the item category assigned in its details. This item category is not to be confused with your SD item category. This one is of purchase requisition that gets generated from SO# in the case of Third party.
IMG> Sales and Distribution>Sales>Schedule Lines>Define Schedule Line Categories
It would be 5 - Third Party. Change it to 3 - Subcontracting.
Reward if helpful.
Regards

PO Account assignment F(Order) with item category D(service

Hi Gurus,
I have created Po with with account assignment F (Order) & item category D (Service).But when i am going to change the Order number in account assgnment tab .It is not in editable mode, it is not indisable mode .So how it will come into editable mode. .what configuration setting i have do please help me sir.
Thanks in advance.
Regards,
Kirti

>
kirtiratna tabhane wrote:
> Hi kishor,
>
> We are not crating the PR w.r .to any order in that case can we change .How.But why we can not directly change into PO.If i am Creating thr PO with Acc *** F (order ) for material.inn that case it comes in editable mode.please help me.
>
> Regards,
> Kirti
Hi Kirti,
yes, if you create the PO using transaction ME21N, or ME21, then you should be able to change it. Unless the PO has already been closed, or deleted, or the goods received has been carried out for the PO. Then you cannot change it.
You can check the PO status, if the gr has been carried out, there should be a PO history tab in the item level.
If the PO is closed, or deleted, there should be a trash bin icon next to the item in the overview.
If the PO is created with reference to order (F), then in account assignment tab, there should be an order number. In this case, then you need to trace back to the RF, delete it, then change the data in the order, create another RF, then you account assignment in PO will be corrected.
Hope this helps.
Regards,
Anisah

For Z Po order type - Item category field is greyed out.

Hi MM Experts,
I am an ABAper working on PO creation with respect to PR( PR with account assignment N) for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
Thanks in Advance
Pravee.

Hi All,
Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
Thanks
Pravee.

Split Charging for PO-Framework Order with Item category B- Blank Item

Hi,
how can i make the system split the qty percentage/charging for Framework Order ,Charge to Project and Item Category of B- Blank item during PO creation/change. This functionality is behaving normal for a standard PO charge to P and item category is standard.
we are using ecc6 and we dont use any material master..
Thanks in advance..
She

Hi,
This can be controlled through account assignment category,
In SPRO > Materials Management > Purchasing > Account Assignment > Maintain Account Assignment Categories > Double click on account asignment category > Fill the field distribution according to your requirement.
During PO creation, in item details, account assignment tab, you can give the split.
Regards,
Prabu

Suppresing Delivery note prints for certain sales order types/item category

Hi
I need to find a way of suppressing some delivery notes from being printed.
Relating to orders for consignment fill up and consignment issue.
The delivery notes are needed to be printed for 'Consignment fill up order' type, BUT not for Consignment issue - as this is confusing some of the warehouse staff at month end.
All have the same delivery type, the only difference i can see is the item category types are different
Is there a way i can use the sales order type, with customer number as an access sequence for the Output type ?
- Or the Item category type ?
Is it possible to add sales order type or Item category into the FIELD CATALOG :- output for deliveries
Your help would be much appreciated
Cheers
Tony

Hi,
I can suggest you something, but do remember that I've never done such kind of thing till date.
>> Copy LF and create new delivery type
>> Assign this to your consignment doc. types
>> Kindly remove the Header output determination procedure assigned to this new delivery type
>> Then assign output det. procedure at Item level {according to Item category}
>> Then check if will cater to your requirment or not.
Please keep one thing in mind that I am giving you a proposal by thinking in one logical way and I can't confirm the practicality of the proposal.
Hrishi

Blanket Purchase Order or Contract Purchase Order by item Category level

Hi
I have a requirement that Strategic buyers will fill agreement with supplier by item Category level
Agreement will be on Price level and will have expiration date
The category level will contain list of items Part numbers which are the same item from technically :
Our business is on the electronics contract manufacturing and we are producing for Customers from the High Tech industry .In order to keep each customer process and unique
environment we are coding the item Part # per customer since of that the same electronic component having different part # per customer
Each night we running MRP run (ASCP) and the Planner release Planned order to request ion
The requirement is that the purchase requisition will derive the price from the agreement based on assigned Category level and will automatically convert to Purchase order
Looking for your advise how can this be implemented ?
Thanks

When you release the Planned Order for the these buy items the cost coming up in the table PO_REQUISITIONS_INTERFACE_ALL will be the list price for the item from Org level.
But when you have a BPO created for this item and Sourcing rule is created to have automatic release the releases will have the unit price coming from the BPO.
Correct me if I understood your question wrongly.
Karthik.
Edited by: Karthik Gopaluni on May 21, 2010 11:54 AM

Sales Order Line item category not getting Re detemining Correctly

Dear all,
            I need help regarding the Sales order item category redetermination.
            we are having two item categories YNAE and YNAG and it contains schedule line categories CP and CB ( i.e for item         category YNAE schedule line category is CP and for item category YNAG schedule line category is CB),
for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
         Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and it is working fine .
         But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule line on SAVE and its delivary dates are also not getting determined properly. If i press the option ATP check at the schedule line level than very things will getting corrected.
   I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
Regards,
Vaddepally Manoj

USEREXIT_PRICING_PREPARE_TKOMP is the wrong location - that exit is for pricing communication preparation only. Your primary location for item category determination is USEREXIT_SOURCE_DETERMINATION (MV45AFZB). In your simple scenario, you could consider making an availability check at this point with some assumptions and then assign the item category accordingly. Otherwise, you can re-assign item category and schedule line category in USEREXIT_MOVE_FIELD_TO_VBEP. The exit is called once before ATP (for ATP-relevant schedule line categories) and once afterwards. The call is recursive if you re-assign another ATP-relevant category.

Returnable Packing - Sales order maintainance / Item Category determination

Gurus,
I have question about returnable packing regarding sales order entry and item category determination
1) Sales order : Should we do entry of returnable packing in Sales Order as a regular item
Example : The material M1 - 100unites needs returnable packing materials PK1 5 unites.
Therefore in sales order it should be entered as below
M1 - 100unites
PK1 - 5unites
Please commnet.
2) Item category determination should be done at sales document level
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (???) = TAL
Please commnet.
Regards,
Ashish

Hi
Yes Ashish you need to enter the returnable as a separate item in the sales order
For qn no 2 the item categories of higher levelitems can be TAN and TAX
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (blank) =TAL
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (TAN) =TAL
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (TAX)=TAL
Note returnable packing items are creates as a separate materials with material type as LEIH and item category group as LEIH
How to bring back the returnable packaging stocks to your plant
Creating a Returnable Packaging Pick-Up
Create a sales order using order type LA /AT.
Enter the required data on the customer, the returnable packaging, and the plant to which the materials are to be returned.
Enter all other relevant data and save the order.
Create a returns delivery for the sales order when the materials reach your company.
The system proposes delivery type LR automatically. The transaction is completed by the goods receipt posting which initiates a transfer posting from the customer's special stock to your plant stock.
Regards
Raja

Return order against item category TANN.

Dear All,
We have raised Invoice for two line item, one is TAN and another is TANN. While creating return order with reference to Invoice, system coppied only item category TAN and for TANN. We have received msg as below :-
"Item category for item 000013 can not be determined"
after press enter second msg receive as :-
"Item 00013 is not coppied from the reference document".
Please explain what assigment we have to do.
Thanks
Prashant

Hi ,
The return order item categories are REN adn RENN( free goods). You need to do item category determination in VOV4 RE-NORM-REN and RE-NORM-REN-RENN..
Also create the copy control settings in VTAF for RE-F2..
Hope this helps,
Reg,
JJ

Order type & Item Category

Dear SAPers,
i used to work with the standard Order Type and Item Category. Now i decided to copy and change them. By raising the sales order (with my order type 9OR) i don't get the item category 9TAN that i created. How can i solve that.
Thanks

Hi
Go to (VOV4) and do the Item category Determination for your Sales Document Type, Item Category Group & Default Item category. if this assignment is done, then once u raise the sales order then u can find your item category.
Hope this will help.
Thanks & Regards
Aravind

PM order reservation item Category - L cannot be used

Similar Messages

Maybe you are looking for