PO Item is not coming into MIGO

Hi Gurus,
I am facing a problem please tell me why I am getting this issue.
I created a PO with 2 items one with master record and other without master record. I gave them account assignment category K to both. Now when I am doing goods receipt using MIGO and select the PO from left side it just show me only one item which have master record. When I search the PO it shows me both items but when I try to adopt the item without master record it is giving me a message "Purchase order XXXXXXXXXXX has no items" but if i try other that get adopted without any message.
Please tell me how can I resolve this issue.

Hi,
kindly check if you have maintained a Confirmation Control Key in the Purchase Order Tab for confirmations, You might have to create an inbound delivery using vl31n, for this to work.
I cannot think of anything else preventing GR.
Regards
Shailesh

Similar Messages

Amount is not coming into the Invoice for Warranty Order

Salute All !!
Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
Please provide solution.
Rgds
Srivastav
+91-9973504950

Hi,
Because you are not billing to customer the net amount is zero-
You can do like bill the component as regular item and give credit note against it.
or else create seperate billing output type assign this to proforma invoice- print the cost of item by pulling it in new smart form.
(this is not very good idea because , customer knows the actual cost of the item)
Thanks
Chidambaram

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

BOM items are not coming in Subcontracting PO

Hi,
I have created a Finish good material and also have made BOM for that Finish material when I am trying to make a Subcontracting PO for that Finish material the BOM items are not coming in PO for that Finish material only for other material BOM items are coming properly.
regards,
zafar
Edited by: zafar_karnalkar on May 29, 2010 1:48 PM

Hi,
Pl. recheck the BOM.
Bom usage 1.
Item Type : L
SAM

Page items do not go into Excel when exporting

We are using 10.1.2 viewer and plus (and I have the desktop version available). I have tried exporting a worksheet with page items using all 3 of the above and the page items will not go into excel. Is there any trick to get this to work? I thought that it used to work in older versions?
thanks
Angie

Did you try the Export to Excel as Pivot Table option? That would create a base sheet with all the page items flattened out, a static sheet that looks like the worksheet at the time of the export, and an Excel Pivot Table where you can page through the page items.
thanks
Abhinav
Oracle Business Intelligence Product Management
BI - http://www.oracle.com/bi
BI - http://www.oracle.com/technology/bi
Blog - http://blogs.oracle.com/
BI Blog - http://oraclebi.blogspot.com/

My new messages still not coming into my mail inbox, my Mac OS X version 10.6.8

Can you please give me the correct detail for Mail Preference/account information both incoming mail server & outgoing mail server.
My new messages still not coming into my mail inbox yet, still not working since yesterday. My sent mails are ok working. What,s number for Port & click on 'use SSL'? 110?
My safari is working Internet.. My ipad2 is still working to receive my new messages via my mail inbox. Something miss in my mail preference? How to fix it?
Regards lisa

Here's my reply to another discussion on the general procedures for setting up a Mail account.
But without the specifications defined by your ISP no one can tell you any more specific details. They should have a web page somewhere (or call them) that supplies all the relevant information:
Incoming (pop) mail server
mail login user name and password
pop port
ssl requirements
authentication type (password?)
Outgoing (smtp) mail server
smtp port
ssl requirements
authentication type (password?)
mail login user name and password

CVD & ADC not flowing into MIGO.

Hai all,
For the Import purchasing, i did the MIRO to capture the customs & CVD values. But while doing GR, CVD & ADC values are not flowing into MIGO ( it should be shown in BED & AED ) respectively. I have maintained this condition types JCV1 & JADC in Excise default settings also. Is there any notes are available for this error?. Please throw your lights

Hi,
Please check J1ID, whether we have maintained material and chapter id combination and cenvat determination. Secondly check the MIRO no. you are entering while doing MIGO. Sometimes it happen, that the miro number entered during MIGO different that of actual MIRO.
Ishu

Order Item quantity not coming in va12 transaction

Hi ,
      i am using Bapi : BAPI_INQUIRY_CREATEFROMDATA2 .
      After running and also commit work .
      Order Quantity for item is not Coming in va12 Transaction .
      Any solution fot this .
Input to Inport parameters INQUIRY_HEADER_IN table :
                         DOC_TYPE = ZBIN .
                         SALES_ORG = 1000
                         DISTR_CHAN = 70
                         DIVISION      = 03
                         SALES_OFF = 1000
Input to INQUIRY_ITEMS_IN table :
                                  MATERIAL = scrap
                                 TARGET_QTY = 10
Input   to INQUIRY_PARTNERS : PARTN_ROLE = SP
                                                 PARTN_NUMB = 101
So in above example Order Quantiy 10 is not coming in va12 Transaction .

Hi Rishu,
I know this is a really old post, but I am updating this to help anybody else who finds this.
The answer is because you need to populate schedule lines and also include the quantities on the schedule lines. If you do not include these then the value is always 0 at item level.
Cheers,
Katan

Error 28: Selected item could not fit into memory question?

hi evreyone,
don't know but Solaris 10 is not making any sense to me at all.the peoblem is i have installed Solaris 10 many times ,sometime GRUB detected Windows XP automatically and other times it could not and other times it halted during installation and said I/O error could not install all packages ,so i changed my CD-ROM anyway it did install Solaris 10 some times but GRUB could not detec Windows XP automatically and i could not configure GRUB to do so manually so i bought a new CD-ROM and mounted it on my pc.anyway when i tryed to install Solaris 10 and choosed Solaris from the booting screen it displayed the above mentioned error:
Error 28: Selected item can not fit into memory
the upper memory in the booting screen was: 752576 kb
lower memory: 639 kb
don't know but Solaris 10 is not making any sense to me since a week ,it's behavior is not understood .although i did run the install check before starting the installation and it did say Soalris 10 can be installed on you system.my hardware information is the following:
Gigabyte mother board with bult in VGA ,Sound ,Ethernet
40 GB Western Digital Hard Disk
750 MB of RAM's
Pentuiem 4 ,1 MB Cache
please adivce if anyone knows about this?

I was trying to fix this for more then 2 weeks , finally the solution to fix this was easy: GRUB new version 97 is crab ( sorry why i do not know but .. )
I have one disk with: windows xp and second part for fedora
I got the error after upgrading to fedora 6
I got GRUB 97 version with this fedora 6 automatically installed
and while booting on disk :
Error 28: Selected item could not fit into memory
all forums are explaining that it is not possible to boot via GRUB on a 2 nd partion to Linux ( fedora) because of 1024 constrains etc.
I can tell you that after installing GRUB version 92 in a fedora on the harddisk ( 2nd part) started via rescue cd
I installed the GRUB older version 92 forced to overwrite the GRUB version 97 on this partion of fedora
run grub via recue cd but run version 92 installed now
via command
/mnt/sysimage/sbin/grub
root ( hd0,1)
setup (hd0,1)
it installs grub on the boot record
and now I can boot without any problem on this GRUB in the boot record of the 2nd part of the disk
I use GAG on the MBR and GRUB ( version 92) on the boot record of Fedora partition and now it starts easy , no problems anymore
good to know, but it took some time to find it

Sales contracts could not coming into the KE24

Hi,
Only sales contracts(VA43) not coming ito the KE24
But whenever we created the sales order with reference to the sales contracts then that time its appearing into the ke24
why only sales contracts(do not having the Sales orders) not coming into the KE24
Is it requires any config for this

Hi
Contaract is not standard charactor in co-pa thats y only contract it won be appear in the ke 24 report . if you are using contract with reference to sales order when you are doing the billing system it will take both sale order and coanaract fields it will update in co-pa .
If you want to take contaract in to co-pa without sales order u have to create charactor strics dervation rule in KEDR transaction then it will update in copa .

Total Excise Duty not coming in MIGO

Hi All,
For a PO in MIGO am getting Total Excise tab in header level(in Excise invoice tab) but the same is not coming in item details.Please let me know what is wrong?
Thanks,
Rakesh.

Hai,
In std sap u will not get the total excise in either header r item, in ur client it might have delveloped.

Line items are not coming on next page in Bill of Lading

When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
Kindly help me to resolve the issue as it is very critical.

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Educationau200Bl SCessCVD (J1CV) is not coming in MIGO from MIRO

Hi,
This is a scenario of Import Purchasing of Excisable Material
I did Invoice Verification (MIRO) for Custom and CVD and while doing Goods Receipt (MIGO), I referred the Invoice Document No. as well.
The value of CVD (JCV1), ECess CVD (JECV) and Add. Customs duty (JADC) is being captured in MIGO from the Invoice document but the value of Educational SCessCVD (J1CV) is not flowing from the Invoice document.
The CIN settings regarding Excise default seems to be properly maintained for the rest three condition types above mentioned but since the condition type J1CV is hard coded in SAP so this couldn't be maintained in Excise Default.
Please provide the expert opinion to overcome this issue.
Thanks in advance
Rajesh Praveen

Hi
J1CV SEcess you have to maintain in AT1
Check once again Chapter ID Tax indicator, Vendor Tax indicator, Cenvat determination for particular materials all are in J1ID, and check your condition type is in classify condition types
[Re: Ecess and SCEss values are not coming automatically in MIGO for import;
Regards
Kailas ugale

57F4 Chalan is not coming in MIGO Header

Dear Friend,
When I am doing MIGO for a job work PO, In the Header data, Excise invoice tab page, the option for 57F4 chalan is not coming!
The material does not have a master record and and account assignment category is K. The material group is J001 ( Job Work Uploaded Materials).
Can you pls give me a clue to get it in MIGO?
Thanks
Chandra

Dear Sujoy
This material does not have a master record. Thus it does not have any material code. TThus I cant not maintain J1ID.
But then what can be done ?
Thanks
Chandra

PO Item is not coming into MIGO

Similar Messages

Maybe you are looking for