PO without Costing

Hi experts,
recently i have this problem,
We have 2 new members, one reponsible in production order and another responsible in
production line.
First member create production order without costing, release , save and then send p/o to production.
Second member use MB31 good recieve from that p/o without cost.
How can i prevent this type of problem? Can i change warning message to error message? If possible how and where i should config?
i will give point for useful answer for sure.
regards.

Dear,
From your question What I understood is you want the costing to be automatic during release of the production order so that before you GR, the cost is calculated.
if so,
Do the following,
in OPL8
for the given order type and plant
in controlling tab,
planned cost calculation = 2(detremin planned cost when saving if released.)
save it.
it will work,
if my understanding is wrong, pl come back

Similar Messages

Planning on WBS elements without cost elements

Hi all,
we are trying to implement the planning solution where users will be able to plan on individual WBS elements monthly but without providing a breakdown on cost elements. Standard SAP planning profiles allow to post plan values on WBS elements in annual view without cost elements. But when you want a monthly view the system you need to click on primary cost elements planning first.
Is there any way to plan monthly but at cost object (WBS) level only?
Many thanks,
Roman

Hi Eli,
thanks for your response. We will be using budget functionality for budget purposes but at the same time we will need to use planning on different versions. I believe there are no versions for budget.
One of the idea to minimize cost element planning is to introduce like a planning cost element to use with all planning postings and then include this into the same cost element group with the rest of cost elements for plan/actuals comparison reports.
If you have something in your mind I would appreciate your input.
Thank you,
Roman

Goods Receipt without Costs

Dear Expers,
A colleague of mine has done Good Receipt without cost when I go in Inventory posting the G/L Acct is missing because of this. How Can I rectify this... I have tried doing stock revaluation but its giving BK-PLEASE ENTER A PROFIT CENTER....even tho I put in the profit center I get the same error msg.
Thanks,
Titi

Hi,
Please check the Note 1099094 suggested by Johnson.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1099094]
Yes of course if you valuing by Moving average. its highly crucial to maintain and you do MR - material revaluation the issue is more the cost is increased. The cost will have increased.
( (Item price* qty) + (available item price * qty) ) / total quantity. Please do calulation it will all be correct to the value inthe system.
Please be careful with these type of transaction.
Regards,
Rakesh N

Sales order value flow to internal order without cost elements.

Dear Sap Friends,
My client have a requirement, when sales people creating a sales order, sales value flow into internal order without a cost elements. normal case when SO, Deleivery, and billing data automatically can flow into CO-PA. Here i want to know how value can flow into I.O. without a cost elements please give me advise.
i created a statistical internal order and that internal order i assigned in sales order account assingment. but i know that there is no value going to flow this I.O. becasue there is no cost elements.(becasue client dont want to create a cost element for internal order)
There is any option when i crate a sales order values can go into internal order without cost elements or i can create a statistical Internal Order and assigned into CO-PA? if i can dothatt what is the steps. kindly explain to me. if some have can explain to me please leave contacts number or send me reply.
Regards
Paul

By standard configuration itr is not possible.
You ought to have user exit in place.
For DC A & B, where you need a redetermination of pricing component, take help of an ABAPer for user exit USEREXIT_XKOMV_FUELLEN (module pool SAPLV61A, program RV61AFZB).
So now, for DC C, you need to change the copying control in VTFL - item, where your pricing type ought to be D-Copy pricing elements unchanged.
Regards
JP
ASSUMPTION: I assume that your all DC uses the same Sales Doc type & Billing Doc type

I drop my ipad 3 64GB and the screen cracked. It is still under warranty period. Will they replace it without cost?

drop my ipad 3 64GB and the screen cracked. It is still under warranty period. Will they replace it without cost?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

Costing items for material 21000001 in plant 204A without cost element.

Dear Friends,
Kindly suggest solution to below problem,
Costing items for material 21000001 in plant 204A without cost element.
Message no. CK597
Diagnosis
The itemization for material 21000001 in plant 204A contains valuation-relevant items without a cost element.
System Response
The costs of these item(s) cannot be included in the cost component split. This means that there will be inconsistencies between the cost component split and the itemization.
Procedure
Check the log for further system messages for material 21000001 in plant 204A. Correct the error and carry out costing again.
Thanks
Gaurav Chopra

Thanks
The error has been resolved..
In master data itself.
For co-products , the version category was not maintained.
Moreover in BOM,
The items which were coproducts were not Ticked as co product.
Thanks..
Gaurav Chopra

Submit Project proposal without Cost budget

Dear All,
Is there a way to restrict the Project manager not to submit the Project without Cost budget.
Regards

Hi
You may want to enable WORKFLOW for project status change.
In Workflow you may add a custom validation that will check the existence of a cost budget for that project.
Dina

Restrict Confirmation without Cost Release

Hi,
How can we Restrict Confirmation without Cost Release???
Plz guide..
Moderator: Please, respect the rules, specify your questions and do not use SMS language

Dear Devendra,
Check these threads,
Re: Blocking the conversion of Planned orders to Production orders before mate
Re: Process Order Creation without Standard Cost
Re: error msg if no standard cost present for Production order target cost
Regards
Mangalraj.S

KI235 - can post without cost object if select "continue" in profit segment

Hello all, I have a GL account where cost object is required. This works correctly and KI235 error message is given. However, if I go into the profitability segment and select CONTINUE - even though no cost object is assigned, SAP allows posting to the account without any cost object.
This seems to be a bug in SAP but I couldn't find any OSS notes related to it. We are on ECC6.0 and did a support pack upgrade in April.
Any suggestions are greatly appreciated.
Regards, Cheryl

Hi Sridhar,
   you´re right I have the same incidence but when I try to use an automatically derived, doesn´t work If I use a standar batch input.
   In my case is with the electronic bank statements.
   thanks for your help.

Update material price without cost estimate

hi guys,
I'm facing a problem. The requirement is to update the other prices( plan price1, tax price etc) without a cost estimate. My parnter suggested me to use BAPI_COSTESTIMATE_UPDATE_PRICE. But I found this FM needs an existing cost estimate to get the price then update the price field specified.
Do you have any ideas ?
thanks a lot,
irene

Hi
Do you have the price to be uploaded in your mind or does it need a calculation??
If it is in your mind, use LSMW for MM02 and update the price directly
If it needs calculation and then updation, then use this BAPI...
Br, Ajay M

Query on items without cost

Hi Experts,
Is there a query wherein I can get items sold (DR and Invoice) without Item cost? Which means no CGS was recorded since no receipt was made yet. Client allows transactions with negative quantities and FIFO valuation.
Query can be generated on range of dates.
Many thanks,
Don

Hi Don.....
Please try this.......
Select T0.DocNum, T0.DocDate, T0.CardName, T1.LineNum, T1.ItemCode, T1.Dscription, T1.Quantity, T1.Price, T1.LineTotal From
ODLN T0 Inner Join DLN1 T1 On T0.DocEntry=T1.DocEntry Where T0.DocType='S' And T1.LineTotal<=0 And (T0.DocDate>='[%0]' and T0.DocDate<='[%1]')
Union All
Select T0.DocNum, T0.DocDate, T0.CardName, T1.LineNum, T1.ItemCode, T1.Dscription, T1.Quantity, T1.Price, T1.LineTotal From
OINV T0 Inner Join INV1 T1 On T0.DocEntry=T1.DocEntry Where T0.DocType='S' And T1.LineTotal<=0 And (T0.DocDate>='[%0]' and T0.DocDate<='[%1]')
Regards,
Rahul

NO Production Declaration without costing release.

Hi there,
I want to connect my costing release with production declaration. where users will not be able to declare the production without its costing release through Ck40n or ck11n & MF30
pl. help me to do it.

Dear Nishant,
Is it in a Discrete scenario or else in a REM scenario?
If it's a Discrete scenario,then you can make use of this BADI - WORKORDER_UPDATE during Order release and check for
current Planned price(as this field gets updated after releasing the cost estimate) MBEW - LPLPR,if it's empty or zero
means,then do not allow for release.
In a REM scenario assign a REM profile which requires (post activities based on std.cost estimate of the material) a std cost
estimate,then in this case you cannot carryout a GR.
Regards
Mangalraj.S

Production Declaration without Costing Release.

Hi there,
I want to connect my costing release with production declaration. where people will not be able to declare the production without its costing release.
pl. help me to do it.

In KP26 -> you need to Assign Cost center - Work center - Cost element
Then go to Routine & declare the production activities for the same .
So that during cost run, it add the Matl cost, Activity cost to the Finished goods.

Releasing of Production Order without Cost-Run

Dear Sir,
We want to incorporate a check in the system so that no Production-Order should be released unless the Manufactured component (component being manufactured in the Production Order) has the proper cost run . By proper cost run mean that standard cost for the component is greater than 0 .
Kindly guide us . Full marks are asssured for the suggested solution please .
Regards
B Mittal

Hi,
Try with user status and the conditions specified in Bs02
Regards,
nandha

Material Type without Costing View(non valuated) in Billing Document

We currently have a situation where we have Displays ( non valuated- no costing view material type) being added to regular Sales Orders
In our model, we are also updating product cost on materials when the 1) they were subs or finished goods and 2) via certain billing types.
Unfortunately, the other non valuated display material type is being called when the billing is occuring and is causing an error . See KE4j and KE4c in CO-PA config as a reference
My question- is there a way to further exclude a material type from being costed in PA when it is included in the billing
Thank you
Jeffrey Webber

Costing value zero can happen due to multiple reasons. Here are some of the things to be considered.
Did you check master data of material C to see if there are any costs for material C?
What are the valuation strategy for material valuation set up in the valuation variant? Is there any strategy that included price from purchase info record?
Is info record set up for material C in the new system that you are testing?
Did you check activity quantities in routing and activity rates set up in cost center for the period you are running standard costs?
Did you check the formula in the work center costing tab?
Thanks,
Ram

PO without Costing

Similar Messages

Maybe you are looking for