Pocess order - target quantity in cost analysis report

hi experts ,
i am not getting the target quantity in cost analysis report of header material , though i have made the GR of the process order .
target quantity is showing zero.
i am getting target quantity of components , sfg used.
kindly give your inputs.
reagrds,
satish

Dear
First Check the Validity of the standard cost for the header material, It can be seen in ck13n, Dates tab.
Target costs are populated when you do the goods receipt. System will search for the released standard cost estimate and then apply that for each material component. If these 2 conditions are passed, then you will get target cost in order.
Plan cost = Plan qty * std cost estimate
Target Cost = Actual qty * std cost estimate
Actual cost = Actual qty * actual costs
Eg:
A production order is planned for producing 10 units of a material
Then plan cost on the order = 10 units * std cost
Target costs are calculated once production is confirmed.
Suppose only 9 units were produced out of 10 planned
Then target cost = 9 units * std. costs
Regards
Ganesh M

Similar Messages

  • Re: Target Quantity in Cost Analysis for process Order

    Hi ,
    How is the target quantity is being calculated in Process order.
    Two of BOM components total target qty, is different from the plan quanity.
    Please advice.
    Regards,
    Vivek Sharma

    Hi Vivek,
    Can you pl share the cause of the same.
    Ulhas

  • Total Target Cost in Cost Analysis report

    Hi Everybody,
                 I have come across a problem. In transaction cor3 when I give the process order then in goto>costs>analysis  in the given  report I wouldnt be able to find the relevent tables for the field 'Total Target Cost' if someone could help me from where I will be able to reterive this field data  int he definition they gave me the fomula
    Total Target cost = Target Cost debit + target Cost credit.
    If someone have any information regarding target Cost Debit and Target Cost Credit  please help me out. I will be very thankful to him or her.
    Regards,

    Hi Everybody,
                 I have come across a problem. In transaction cor3 when I give the process order then in goto>costs>analysis  in the given  report I wouldnt be able to find the relevent tables for the field 'Total Target Cost' if someone could help me from where I will be able to reterive this field data  int he definition they gave me the fomula
    Total Target cost = Target Cost debit + target Cost credit.
    If someone have any information regarding target Cost Debit and Target Cost Credit  please help me out. I will be very thankful to him or her.
    Regards,

  • Cost Analysis Report - For a range of process orders

    Dear all,
    Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
    Thanks
    Nagarajan

    Dear
    You can use cost analysis report like
    1.S_ALR_87099932 - Variances Between Costing Runs
    2.S_ALR_87099931 - Price vs Cost Estimate
    3.S_ALR_87099932 - Variances Between Costing Runs
    5.KOC4
    Regards
    JH

  • How to get Cost element for a component in co03 cost analysis report

    Hi,
    I'm using table COSP to find the quantity for a production order component.  However, I need to identify the cost element first to get the unique data.  In CO03 cost analysis report, there is cost element for the component.  Does anyone know how to get it ?
    Thanks.

    CSKA stores the basic info about the cost element
    There is no data in CSKB.
    I'm trying to use different tables to get the cost element.
    AUFK, AFKO, AFPO, RESB, ...but no luck...

  • Activity type origin text doesn't have been showed on Cost analysis report

    I have defined three acitivities TMAQ, TMO, CIF. But  the origin text column of these acitivities is not showing in cost Analysis report(althoug the origin is showed), i.e. when we go to an order & navigate to "Cost Analysis".  TCODE:CO02 (Production order)
    Anyone knows how to show the origin text ?
    Thanks a lot for your comments.
    Vero

    Hi Veronica
    I think maybe it´s missing the description in language you are running the report.
    Check transaction KL03 to see if the activity type has the description in the language you are logged.
    If not go to KL02 and update the description and try to run it again.
    Regards
    Fred

  • In production order the cost analysis report  is not displaying correct

    Hi,
       when i create production order and do some posting activities i could not see the GR  cost row  details in the cost trend report in the production order.
    i could see the goods issue, confirmations and overhead rows segments in it. but i could not see the goods receipt tab in the <b>cost trend report .</b> where the implication lies can u suggest.
    regards
    madan

    Hi,
    In t.code oplr (order type dependent parameters) check in the controlling tab if you have given the costing variant as PPP2 for the Actual cost calculation & PPP1 for the planned cost for your order type.
    Regards,
    SDs

  • Cost analysis report

    Hi,
    In a production order we can go to 'Cost Analysis' to check plan / target / actual / variance values.
    What is to be done if we need a collective report of multiple orders.
    is there any standard report? 
    thanks in advance.
    neeraja

    Hi Neeraja
    Set up summarization hierarchy in KKR0 - Execute KKRC to collect data and Execute KKBC_HOE
    KKRC will be monthly activity to be done after each period end closing i.e. after settlement of orders
    br, Ajay M

  • Double target qty in cost analysis

    In one of plant for particular order type, system always saw target qty as double.
    Example; confirm qty is 100 kg then system saws target qty as 200 kg in cost analysis of COR3 screen. Actual qty coming correct. Even when I'm checking goods movement for order seing 100 kg for 101 movement. Then why target saws 200 kg. Fyi, there is no change in BOM or recipe from creation date.
    Again this issue happens only in 1 plant out of 5 and particular 1 order had this issue.
    Can you please help to understand system this behaviour? What could be issue?

    Hi Eric,
    Please take a look of this thread:
    Analyzing Costs on Production Order
    This is what Akhil Baluja said:
    In your case, the target quantity is double from Plan quantity might be because of in Routing of the material the Base quantity used for calculation of Standard Cost might be double & after the cost estimate has been released it was reduced to correct figure Or the Alternate routing was used while calculating standard Cost & in actual production.
    Please check....
    Check if this could be your problem.
    Kind Regards,
    Mariano

  • Hide Amount column in COR3 cost analysis report

    Hi Expert,
    We need to hide the amount column in COR3 when user go to costs -> analysis.  Because we don't want PP user to see the cost informant but the need to see the quantity for actual and plan to make sure goods issue is really complete.  Would you please advise how to achive this purpose?
    Thanks and Best Regards,

    hi gimmo,
    thanks for the quick reply.  however, i think this is only possible if i am using a structure in my rows, because there i can specifically assign the appropriate calculated key figure to use.  i need to use the hierarchy because we'd like to present the report down to the account number level.
    thanks

  • CO03 cost Analysis report to BW Report

    I need to create a report in BW same as (CO03) Cost - Analysis, I want to create an extractor that extract data the same as what the (CO03) Cost - Analysis shows, but unfortunately i dont know from which and what table, selection condition should i need to use for my extraction.
    or can anyone tell me what function module is used by SAP for this and is it possible to use it in my extractor?
    Thanks you very much in advance

    Hi Joher,
    You can look for Controlling extractors  in R/3
    Basically
    0CO_PC_01
    and other data sources related to that.
    Also you can look for transaction SBIW and there you can look for Controlling and profitabilty analysis(COPA).
    basically it covers all the requirements.But it will contain only those orders which have hit your accounts.
    But basically CO03 is related at production planning and maintenace then you try for other sources also which are present in standard extrator those starting with
    2LIS_17_.....
    This all data sources are based on the PM.
    I
    I think it should help.

  • Zero Quantity in Purchase Analysis Report

    I have create Item AP invoice on today date,  raise AP credit note for that full AP invoice on today date. Then run  purchase analysis report. (Quantity column will show zero) How can I get rid of these zero quantities.

    hi,
    Check in the Inventory tab of item master data for those items.  What is the value for in stock and available.
    If you have done a/p credit memo for those items then by default the system will show zero quantity as the system considers it as the items which are returned
    Hope its helpful
      Regards
    Darshan Desai

  • Standard Cost Analysis Report  (MCI3)

    Hi,
    On SAP standard Cost Analsys report, i have been unable to dig out the reason of not populating values in following few columns.
    - Int. wage costs
    - Int. Mat. Costs
    - Ext. Wage Costs
    - Extenal Mat Costs
    - Services Costs
    Can anybody guide me in populating these values.
    Regards
    Shah

    hi
    if you have posted any material against the order ,then the cost will be reflected in int.material cost ,which is also same for other parameters
    also check whether you info structure is switched on OMOS
    regards
    thyagarajan

  • How to control Order/Target Quantity with reference to Contract Quantity

    Hello GURUs,
    In my current organization, there is one scenario in which i have to control target quantity in sales contract e.g., i have created sales contract of 100 MT (contract no : 123), and with reference to that contract i have created another contract for say 100 MT (contract no : 456), after that i have changed quantity (of contract no 456) to 150 from original quantity 100. In this case system allows to do so, which is not correct, and i want same to be control based original contract quantity.
    Is there any solution in standard system to control the same? If there is any then pleas let me know.
    Thanks,
    Pratik

    Hello,
    Let me clarify your requirement:
    You have created Contract no. 456 (100 MT) with reference to another Contract No. 123 (100 MT).
    Now you want that system should not allow to change quantity in Contract no. 456 & keep it as it is (100 MT) in Original Contract No. 123.
    Now, if the above requirment is from Sales Order created with reference to Contract then it can be easily don thru Item Category Controls.
    But as the second COntract (456) is entirely a new Contract with it own contral parameters (validity dates, etc) system will allow you to change Quantity & other feilds).
    You requirment is not standard & will have be achieved thru applying a User Exit. Speak to your ABAPer & he would do the needful .
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • CO03 function module for cost analysis report

    Hi
    Can anybody pls let me know the function module for which gives the cost analysis data in CO03 transaction. 
    Regards

    Hi
    I'm sorry; BAPI_INTERNALORDER_GETDETAIL, this BAPI did serve my purpose
    Pls let me know if any other FM.
    Thanks for your help.
    Regards

Maybe you are looking for

  • Photoshop Crashing on Win8 when I click CTRL+A

    I have a Photopshop Trial, not going well right now, Ever since I upgraded to Win 8 it will not let me passed pressing CTRL+A. It simply crashes out ot the programme. I have gone to all the trouble of uninstalling it and reinstalling the programme wh

  • Securing WebServices call without user login

    Hello, I spawned a thread in the Java Technologies for Web Services forum about different approaches to securing web service interactions. The security level required is: - guaranteeing the server's identity (so that the customer does not talk to a p

  • New mac died without backup of iweb, restore from mobile me?

    So, my 2 month old mac hard drive died and i had not backed it up yet.  Not a big deal except I had just put the finishing touches on my website.  My question is can the settings and info from the actual iweb site published on mobile me be downloaded

  • Does anyone know what " can't mount ipod" means????

    Hi I posted yesterday with a problem. I fixed that and downloaded the ipod software. I was trying to run the updater with the ipod shuffle plugged into the computer, and now it is saying it can't mount ipod. I also registerd the ipod, but that info d

  • Premiere Pro CS5 zeigt beim Exportieren von Medien Hinweisfenster

    Hallo @ll, heute habe ich in Premiere Pro CS5 meinen ersten Film bearbeitet. Als ich den Film exportieren wollte unter Datei --> Exportieren --> Medien, geht als erstes ein Hinweisfenster auf. "Für diese Version von Premiere Pro ist ein Adobe Media E