Policy map not show results in Cat6500
I have configured QoS in Catalyst 6513 for telepresence service and when I do "show policy interface gix/y" don't show the traffic is being marked.
I think that the QoS is marked the traffic correctly because I am sawing packets marked with AF41 in the next hop for that suspect that the problem is in the "show comand".
It´s normal this behaviour or it could be a IOS bug?
This is the configuration:
ip access-list extended ACLtelepresencia_in
permit ip any any
class-map match-any telepresencia
match access-group name ACLtelepresencia_in
policy-map telepresencia_in
class telepresencia
set dscp af41
D08MNSSRS0#sh policy-map interface GigabitEthernet3/13
GigabitEthernet3/13
Service-policy input: telepresencia_in
Class-map: telepresencia (match-any)
0 packets, 0 bytes
30 second offered rate 0 bps, drop rate 0 bps
Match: access-group name ACLtelepresencia_in
0 packets, 0 bytes
30 second rate 0 bps
Class-map: class-default (match-any)
0 packets, 0 bytes
30 second offered rate 0 bps, drop rate 0 bps
Match: any
Regards
Alberto
Try the query as
select sum(t.total) from
SELECT T0.DocNum, T0.DocTotal,T0.DocTotal - T0.VatSum, T0.DocDate, Sum(T0.DocTotal) as Total,Sum(T0.DocTotal - T0.VatSum) as withoutTax FROM ORDR T0 INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode
WHERE T1.SlpName ='Rajesh Nair' and T1.SlpCode -1
GROUP BY T0.DocNum, T0.DocDate, T0.VatSum, T0.DocTotal
) t
or in one query at the end as sum as
SELECT T0.DocNum, T0.DocTotal,T0.DocTotal - T0.VatSum, T0.DocDate, Sum(T0.DocTotal) as Total,Sum(T0.DocTotal - T0.VatSum) as withoutTax FROM ORDR T0 INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode
WHERE T1.SlpName ='Rajesh Nair' and T1.SlpCode -1
GROUP BY T0.DocNum, T0.DocDate, T0.VatSum, T0.DocTotal
UNION
select null, null, null, null, sum(t.total), null from
SELECT T0.DocNum, T0.DocTotal,T0.DocTotal - T0.VatSum, T0.DocDate, Sum(T0.DocTotal) as Total,Sum(T0.DocTotal - T0.VatSum) as withoutTax FROM ORDR T0 INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode
WHERE T1.SlpName ='Rajesh Nair' and T1.SlpCode -1
GROUP BY T0.DocNum, T0.DocDate, T0.VatSum, T0.DocTotal
) t
Similar Messages
-
Not showing results in simulation
hiii,
i made some chngs in (generate work schedule manually) in development server and transported to production server.
it is transported as i can view the changes but not showing result in simulation run, wats the reason...
ThanksNational Holiday is a simple Off and Paid Day.
So, hw u want the system to consider tht holdiay in payroll ?
might be u have to check in Time Evaluation for considering National Holdiay and wrkin any any spl. .payments towards it.
theere may not be any change of effect due to Holiday in Payroll until and unless the Absence Records if existing on dates of Holiday... then u mite have to delete the Absence Records and Update it again.
Or there is a report that need to be generated to remove the inconsistency... which currently dont have idea... will check n let u knw... in the mean while u can follow deleting the record and update Absence on Holiday again.
Regards
...Sadhu -
Ovi Map not showing railway lines on N8 (UK map)
Hi
I've recently purchased a N8, and I was suprised to see the UK maps not showing the railway lines. However if I scoll across to Germany for example, the lines are clearly shown.
They used to show up on my 5800 and show up on the Ovi maps website, so why no lines on the N8? Or is it just an issue with my device?
Can any other N8 users with Ovi Maps v3.06 confirm whether they show the rail lines in the UK please.
Any suggestions? I've tried re-installing Ovi Maps and re-downloading the maps but no change.
Thanks.
Regards, Brian.
Solved!
Go to Solution.What version of the map data do you have as my N8 with 0.2.42.122 shows railway lines eg in Birmingham in the attached image. I have looked in a few places where I know lines run and all have been there, but it is possible that some have been missed.
N8-00 pc059C9F6 Belle
808 PureView pc059P6W5
Attachments:
Scr000087.jpg 46 KB -
Map not showing standard,hybrid and satellite only only location drop pin is visible
If you havn't already, i would download the latest version of the Maps application for your phone and load the latest map data using map loader.
They can both be found from:
http://europe.nokia.com/explore-services/maps/download
with maploader make sure you delete the older map data before loading new maps (there is a button there for this)
Although i work for Nokia, my opinions are my own!
Got a Maps query? Check our Maps FAQ's -
Segment builder,not showing results.
hi experts
While creating a campaign i assigned marketing attributes to business partner .its visible in the marketing tab page in the respective bp but in the segment builder its not showing results.Hello,
have you added the marketing attributes as a data source to the Segment Builder using Transaciton Code CRMD_MKTDS?
Regards
Gregor -
[Trend Micro Ios content filtering] parameter-type command under policy map not available
Hi, all:
I'm trying to configure TrendMicro IOS content filtering. I have this working on a separate box, running 15.1.
On this particular testbed, I have a 2900 running:
System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T1.bin"
And the following licensing:
Technology Package License Information for Module:'c2900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc uck9 Permanent uck9
data datak9 Permanent datak9
Configuration register is 0x2102
CUBE_GOLD_MEX#show ip trm subscription status
Package Name: Security & Productivity (Trial)
Status: Active
Status Update Time: 18:02:51 CST Mon Jul 23 2012
Expiration-Date: Mon Aug 20 02:00:00 2012
Last Req Status: Processed response successfully
Last Req Sent Time: 18:02:51 CST Mon Jul 23 2012
CUBE_GOLD_MEX#
Also, I have the following config lines on it:
ip host trps.trendmicro.com 216.104.8.100
ip name-server 4.2.2.2
ip cef
multilink bundle-name authenticated
parameter-map type urlfpolicy trend tm-pmap
allow-mode on
[snip]
parameter-map type trend-global trend-glob-map
class-map type inspect match-all http-imap
match protocol http
class-map type urlfilter trend match-any drop-category
match url category Abortion
match url category Activist-Groups
match url category Adult-Mature-Content
match url reputation ADWARE
match url reputation DIALER
match url reputation DISEASE-VECTOR
match url reputation HACKING
match url reputation PASSWORD-CRACKING-APPLICATIONS
match url reputation PHISHING
match url reputation POTENTIALLY-MALICIOUS-SOFTWARE
match url reputation SPYWARE
match url reputation VIRUS-ACCOMPLICE
policy-map type inspect urlfilter trend-policy
class type urlfilter trend drop-category
I have not been able to get to the good part of configuring the ZBF.
I've looked over several configuration examples and can't figure out what I'm doing wrong, since I'm not able to see the command 'parameter-map' under the 'policy-map urlfiltering'
XXXXXX(config)#policy-map type inspect urlfilter trend-policy
XXXXXX(config-pmap)#?
Policy-map configuration commands:
class policy criteria
description Policy-Map description
exit Exit from policy-map configuration mode
no Negate or set default values of a command
XXXXXX(config-pmap)#
I thought it might be an issue with version 15.2.3, but according to configuration guides, commands are the same.
Can anyone provide some assistance?
TIA.
c.Hi Carlos,
I am having the same problem. I have seen a few diffenent configuration examples and they all show adding the "parameter type urlfpolicy trend parm-map-name" command but it doesn't exist, at least in 15.2(3)T1 and I see it listed in the the IOS documentation for 15.2. Maybe they forgot it :-)
I guess I will open a TAC case as I do not want to downgrade...
I will keep you posted if I find the answer.
Regards,
Troy -
Hi!
I am unable to get the result for my one of the item as checkbox. Other two are working properly .Please check and let me know wheres the problem please.
***INCLUDE ZSD_CONTRACT_LIST_T01_RENTAL1 .
TABLES: vbak, vbap, wbrk, zsdsched,vbkd, fplt, fpla, tvlvt.
TYPE-POOLS: slis.
data: BEGIN OF gt_report occurs 0,
vbeln LIKE vbak-vbeln, "Sales Document
posnr LIKE vbap-posnr, "Item
ernam LIKE vbak-ernam, "Created by
erdat LIKE vbak-erdat, "Created on
audat LIKE vbak-audat, "Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
auart LIKE vbak-auart, "Sales Document type
vkorg LIKE vbak-vkorg, "Sales Org
vtweg LIKE vbak-vtweg, "Distribution Channel
spart LIKE vbak-spart, "Division
vkbur LIKE vbak-vkbur, "Sales Office
guebg LIKE vbak-guebg, "Valid from date
gueen LIKE vbak-gueen, "Valid to date kunnrt LIKE kna1-name1, "Sold-to Name
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
kunnr LIKE vbak-kunnr, "Sold-to party
kunnrt LIKE kna1-name1, "Sold-to Name
kvgr4 LIKE vbak-kvgr4, "Territory
matnr LIKE vbap-matnr, "Material
arktx LIKE vbap-arktx, "Material Short Text
charg LIKE vbap-charg, "Batch
matkl LIKE vbap-matkl, "Material Group
pstyv LIKE vbap-pstyv, "Item Category
zmeng LIKE vbap-zmeng, "Target Quantity
zieme LIKE vbap-zieme, "Target Unit
kdmat LIKE vbap-kdmat, "Customer Material Number
werks LIKE vbap-werks, "Plant
lgort LIKE vbap-lgort, "Storage Location
vstel LIKE vbap-vstel, "Shipping Point
route LIKE vbap-route, "Route
netpr LIKE vbap-netpr, "Net Price
kpein LIKE vbap-kpein, "Condition Price Unit
kmein LIKE vbap-kmein, "Condition Unit
shkzg LIKE vbap-shkzg, "Returns Item
oidrc LIKE vbap-oidrc, "DRC Code
kunwe LIKE vbap-oid_ship, "Ship-to
aufnr LIKE vbap-aufnr, "Order Number
vkaus LIKE vbap-vkaus, "Usage
kunwet LIKE kna1-name1, "Ship-to Name
zzwprofid LIKE vbap-zzwprofid, "Waste Profile ID
kunre LIKE wbrk-kunre, "Bill-to
kunret LIKE kna1-name1, "Bill-to Name
addl_schd LIKE icon-id, "Push Button For addl line
datab LIKE zsdsched-datab, "Valid-From Date
datbi LIKE zsdsched-datbi, "Valid To Date
zschdfreq LIKE zsdsched-zschdfreq, "Contract schedule frequency
frequency LIKE zsdsched-frequency, "Frequency
monday LIKE zsdsched-monday, "Mondays
tuesday LIKE zsdsched-tuesday, "Tuesdays
wednesday LIKE zsdsched-wednesday, "Wednesdays
thursday LIKE zsdsched-thursday, "Thursdays
friday LIKE zsdsched-friday, "Fridays
saturday LIKE zsdsched-saturday, "Saturdays
sunday LIKE zsdsched-sunday, "Sundays
dzieme LIKE zsdsched-dzieme, "Target quantity UoM
comments LIKE zsdsched-comments, "Comments
END OF gt_report.
data: Begin of gt_report1 occurs 0,
fksaf LIKE fplt-fksaf,
afdat LIKE fplt-afdat,
fakwr LIKE fplt-fakwr,
fkdat LIKE fplt-fkdat,
nfdat LIKE fplt-nfdat,
fpart LIKE fpla-fpart,
bedat LIKE fpla-bedat,
endat LIKE fpla-endat,
horiz LIKE fpla-horiz,
bezei LIKE tvlvt-bezei,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
ernam LIKE vbak-ernam,
guebg LIKE vbak-guebg,
gueen LIKE vbak-gueen,
auart LIKE vbak-auart,
kunnr LIKE vbak-kunnr,
kvgr4 LIKE vbak-kvgr4,
vkbur LIKE vbak-vkbur,
vkorg LIKE vbak-vkorg,
vtweg LIKE vbak-vtweg,
vbtyp LIKE vbak-vbtyp,
name1 LIKE kna1-name1,
pstyv LIKE vbap-pstyv,
matnr LIKE vbap-matnr,
werks LIKE vbap-werks,
oid_ship LIKE vbap-oid_ship,
kpein LIKE vbap-kpein,
kmein LIKE vbap-kmein,
netpr LIKE vbap-netpr,
kdmat LIKE vbap-kdmat,
posnr LIKE vbap-posnr,
matkl LIKE vbap-matkl,
aufnr LIKE vbap-aufnr,
vkaus LIKE vbap-vkaus,
route LIKE vbap-route,
kunre LIKE wbrk-kunre, "Bill-to
kunwe LIKE vbap-oid_ship, "Ship-to
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
End of gt_report1.
data: gs_report LIKE LINE OF gt_report,
gs_report1 LIKE LINE OF gt_report1,
gt_sched TYPE TABLE OF zsdsched,
gt_sched_tmp TYPE TABLE OF zsdsched,
gs_sched TYPE zsdsched,
gt_sel LIKE gt_report OCCURS 0,
gt_sel1 LIKE gt_report1 OCCURS 0,
gt_vbpa TYPE TABLE OF vbpa,
gs_vbpa TYPE vbpa,
gv_auart TYPE auart,
gv_counter TYPE i.
**-- ALV variables
DATA: ls_fieldcat TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort TYPE slis_sortinfo_alv, "Sorting list
gt_sort TYPE slis_t_sortinfo_alv, "Sort
gs_layout TYPE slis_layout_alv, "List Layout
gs_variant TYPE disvariant, "Display Variant
gv_repid LIKE sy-repid,
gv_save(1) TYPE c,
ls_fieldcat1 TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat1 TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort1 TYPE slis_sortinfo_alv, "Sorting list
gt_sort1 TYPE slis_t_sortinfo_alv, "Sort
gs_layout1 TYPE slis_layout_alv, "List Layout
gs_variant1 TYPE disvariant, "Display Variant
gv_repid1 LIKE sy-repid,
gv_exit(1) TYPE c.
CONSTANTS: gc_a TYPE c VALUE 'A',
gc_g TYPE c VALUE 'G',
gc_re(2) TYPE c VALUE 'RE'.
Screen-control Variables
CONTROLS:
tctrl_sched TYPE TABLEVIEW USING SCREEN 1010. " Schedule lines.
*& Report ZSD_CONTRACT_LIST
*& Created on: January 21, 2007
*& Description: List of Contracts - ALV
REPORT zsd_contract_list_rental1.
INCLUDE zsd_contract_list_t01_rental1.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK m1 WITH FRAME TITLE text-t01.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t02.
SELECT-OPTIONS: s_vkorg FOR vbak-vkorg MEMORY ID vko,
s_vtweg FOR vbak-vtweg MEMORY ID vtw,
s_spart FOR vbak-spart MEMORY ID spa,
s_vkbur FOR vbak-vkbur MEMORY ID vkb.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln,
s_erdat FOR vbak-erdat,
s_ernam FOR vbak-ernam,
s_guebg FOR vbak-guebg,
s_gueen FOR vbak-gueen,
s_auart FOR gv_auart MEMORY ID vta
MATCHCODE OBJECT h_vakz,
s_fkarv FOR fplt-fkarv.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS:
s_kunnr FOR vbak-kunnr,
s_kunwe FOR vbap-oid_ship,
s_kunre FOR wbrk-kunre.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: s_werks FOR vbap-werks MEMORY ID wrk,
s_lgort FOR vbap-lgort MEMORY ID lag,
s_vstel FOR vbap-vstel MEMORY ID vst,
s_route for vbap-route,
s_matnr FOR vbap-matnr.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t04.
PARAMETERS: p_varia TYPE disvariant-variant MEMORY ID wrk,
p_all AS CHECKBOX DEFAULT 'X',
p_group AS CHECKBOX DEFAULT 'X',
p_rental AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN END OF BLOCK m1.
Start of Selection
START-OF-SELECTION.
PERFORM get_data.
Display ALV
END-OF-SELECTION.
IF gt_report[] IS INITIAL.
MESSAGE s419(brain).
ELSE.
PERFORM create_alv.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varia.
PERFORM f01_f4_variant CHANGING p_varia.
*& Form get_data
text
FORM get_data .
select the appropriate rental data.
IF p_rental IS NOT INITIAL AND ( ( p_all IS INITIAL ) AND ( p_group IS INITIAL ) ).
SELECT avbeln aerdat aernam aaudat avbtyp aauart a~vkorg
avtweg aspart avkbur aguebg agueen akunnr a~kvgr4
bpstyv bmatnr bwerks boid_ship bkpein bkmein
bnetpr bkdmat bposnr bmatkl baufnr bvkaus b~route
dbezei efkarv eafdat efakwr efkdat enfdat e~fksaf
ffpart fbedat fendat fhoriz flodat ftndat b~oid_ship AS kunwe
INTO CORRESPONDING FIELDS OF TABLE gt_sel1
FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INNER JOIN vbpa as c ON avbeln = cvbeln
INNER JOIN vbkd AS g ON avbeln = gvbeln
INNER JOIN fplt AS e ON gfplnr = efplnr
INNER JOIN fpla AS f ON efplnr = ffplnr
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr
AND e~fkarv IN s_fkarv
AND e~fksaf = 'A'
OR e~fksaf = 'B'.
sort gt_sel1.
*ENDIF.
IF NOT gt_sel1[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel1
WHERE vbeln = gt_sel1-vbeln
AND parvw = gc_re.
Loop through captured data for additional information
LOOP AT gt_sel1 INTO gs_report1.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
posnr = gs_report1-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report1-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report1-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunnr ).
gs_report1-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunwe ).
gs_report1-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
APPEND gs_report1 TO gt_report1.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM gt_report1.
*ENDIF.
ELSE.
IF ( ( p_all IS NOT INITIAL ) OR ( p_group IS NOT INITIAL ) ) AND p_rental IS INITIAL.
Select the appropriate contract data.
SELECT a~vbeln a~erdat a~ernam a~audat a~vbtyp a~auart a~vkorg
a~vtweg a~spart a~vkbur a~guebg a~gueen a~kunnr a~kvgr4
b~posnr b~matnr b~charg b~matkl b~arktx b~pstyv b~zmeng
b~zieme b~kdmat b~werks b~lgort b~vstel b~netpr b~kpein
b~kmein b~shkzg b~oid_extbol b~oid_miscdl b~oidrc b~oid_ship AS kunwe
b~zzwprofid c~datbi c~datab b~route
baufnr bvkaus d~bezei
INTO CORRESPONDING FIELDS OF TABLE gt_sel
FROM vbak AS a
INNER JOIN vbap AS b ON a~vbeln = b~vbeln
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
LEFT OUTER JOIN zsdsched AS c ON b~vbeln = c~vbeln AND
b~posnr = c~posnr
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr.
SORT gt_sel.
ENDIF.
IF NOT gt_sel[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND parvw = gc_re.
endif.
Select the remaining records from the ZSDSCHED Table.
IF p_group IS NOT INITIAL.
SELECT * FROM zsdsched
INTO TABLE gt_sched
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND posnr = gt_sel-posnr.
SORT gt_sched.
ENDIF.
Loop through captured data for additional information
LOOP AT gt_sel INTO gs_report.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunnr ).
gs_report-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunwe ).
gs_report-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
IF NOT p_group IS INITIAL.
If we are grouping the lines add the icon button.
LOOP AT gt_sched INTO gs_sched WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
IF gv_counter > 0.
gs_report-addl_schd = '@1E@'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING gs_sched TO gs_report.
ADD 1 TO gv_counter.
ENDLOOP.
ELSE.
Otherwise get the rest of the schedule information
READ TABLE gt_sched INTO gs_sched
WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
datbi = gs_report-datbi
datab = gs_report-datab.
IF sy-subrc = 0.
MOVE-CORRESPONDING gs_sched TO gs_report.
ENDIF.
ENDIF.
APPEND gs_report TO gt_report.
ENDLOOP.
Remove any duplicates from the reporting table
DELETE ADJACENT DUPLICATES FROM gt_report.
If Show all records is initial, delete non-scheduled lines (ex. Sub-items)
IF p_all IS INITIAL.
DELETE gt_report WHERE datbi = 0
AND datab = 0.
ENDIF.
endif.
endif.
ENDFORM. " get_data
*& Form create_alv
text
FORM create_alv .
if ( ( p_all is not initial ) or ( p_group is not initial ) ) and p_rental is initial.
PERFORM initialize_fieldcat USING gt_fieldcat[].
PERFORM populate_layout CHANGING gs_layout
gs_variant.
PERFORM populate_sort USING gt_sort[].
PERFORM display_alv_report.
else.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
PERFORM initialize_fieldcat1 USING gt_fieldcat1[].
PERFORM populate_layout1 CHANGING gs_layout1
gs_variant1.
PERFORM populate_sort1 USING gt_sort1[].
PERFORM display_alv_report1.
*endif.
*endif.
ENDFORM. " create_alv
*& Form initialize_fieldcat
Get and enhance the field catalog data
-->L_FIELDCAT[] text
FORM initialize_fieldcat USING l_fieldcat TYPE slis_t_fieldcat_alv.
IF p_rental IS NOT INITIAL .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ENDIF.
ENDIF.
ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
FORM populate_layout CHANGING gs_layout TYPE slis_layout_alv
gs_variant TYPE disvariant.
gs_layout-colwidth_optimize = 'X'.
gs_layout-allow_switch_to_list = 'X'.
gs_layout-zebra = 'X'.
gs_variant-report = sy-repid.
ENDFORM. " populate_layout
*& Form populate_sort
text
-->l_SORT[] text
FORM populate_sort USING l_sort TYPE slis_t_sortinfo_alv.
ENDFORM. " populate_sort
*& Form display_alv_report
FORM display_alv_report .
gv_repid = sy-repid.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_report
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ELSE.
IF p_rental IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = GT_REPORT1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endif.
endif.
ENDFORM. " display_alv_report
*& Form initialize_fieldcat1
Get and enhance the field catalog data for rental fields
-->L_FIELDCAT[] text
*FORM initialize_fieldcat1 USING l_fieldcat1 TYPE slis_t_fieldcat_alv.
**if ***
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
**else.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
***endfi.
*ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
*FORM populate_layout1 CHANGING gs_layout1 TYPE slis_layout_alv
gs_variant1 TYPE disvariant.
gs_layout1-colwidth_optimize = 'X'.
gs_layout1-allow_switch_to_list = 'X'.
gs_layout1-zebra = 'X'.
gs_variant1-report = sy-repid.
*ENDFORM. " populate_layout
***& Form populate_sort
text
-->l_SORT[] text
*FORM populate_sort1 USING l_sort TYPE slis_t_sortinfo_alv.
*ENDFORM. " populate_sort
***& Form display_alv_report
*FORM display_alv_report1 .
gv_repid = sy-repid.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'gt_sel1'
is_layout = gs_layout1
it_fieldcat = gt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort1
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant1
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_sel1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*endif.
*ENDFORM. " display_alv_report
*& Form f01_f4_variant
Get the Layout variant for the user.
FORM f01_f4_variant CHANGING c_variant TYPE disvariant-variant.
DATA: ls_variant TYPE disvariant,
l_exit TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
it_default_fieldcat =
IMPORTING
e_exit = l_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF l_exit EQ space.
c_variant = ls_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f01_f4_variant
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
READ TABLE gt_report INTO gs_report INDEX rs_selfield-tabindex.
CHECK sy-subrc = 0.
CASE rs_selfield-fieldname.
WHEN 'VBELN'.
Set parameter ID for transaction screen field
CHECK NOT gs_report-vbeln IS INITIAL.
SET PARAMETER ID 'KTN' FIELD gs_report-vbeln.
CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN.
WHEN 'ADDL_SCHD'.
CHECK NOT gs_report-addl_schd IS INITIAL.
REFRESH gt_sched_tmp.
LOOP AT gt_sched INTO gs_sched
WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
APPEND gs_sched TO gt_sched_tmp.
ENDLOOP.
CHECK sy-subrc = 0.
CALL SCREEN '1010' STARTING AT 5 5.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
*& Module STATUS_1010 OUTPUT
text
MODULE status_1010 OUTPUT.
SET PF-STATUS 'MAIN_1010'.
SET TITLEBAR '1010' WITH gs_report-vbeln gs_report-posnr.
ENDMODULE. " STATUS_1010 OUTPUT
*& Module USER_COMMAND_1010 INPUT
text
MODULE user_command_1010 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'CANC'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_1010 INPUTHi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks -
Quizz not showing results messages
Can someone please help? I am not an expert of Capt. 5.5. I think I have everything set up right, but obviously I am missing something. At the end of the quiz, the result messages do not show, so people are not told specifically, "you passed", "you failed." Does anyone have any suggestions? I have posted my preferences to see if someone finds a problem with them. Thanks much for any help you can provide!
Did you perhaps delete the Review area on the score slide? The Quiz Results messages will be displayed in that text caption, so leave it alone.
Lilybiri -
I don't know why but I always have trouble with Quizzes in Adobe Presenter. I recently published a new module and the quiz appears but it won't show the results and it won't advance to the final slide of the presentation after the quiz is complete. I did get an error message when I saved the presentation (before I published it) but the quiz component still shows up in the published module....just not the results. I am still using Adobe Presenter 6 and I downgraded the ppt. to 2003 since the new version of ppt. has been a known problem. Does anyone have any advice?
I just now had the same problem (well almost... mine would advance after the quiz results page, but the results weren't showing). The solution that worked for me was to delete the Quiz Results page then go into the Quiz Manager and click OK. AP then generated a new Quiz Results page, which worked fine.
Thought I'd post this in case anyone else is searching through the forum because they're having the same problem (or if it happens to me and I forget how I fixed it)! -
Embedded Google search on our website is not showing results. Windows 8, 64 bit, Firefox 30
We have Google Search embedded in our website. It was brought to my attention by one of our employees that Firefox is not showing the results of the search after the search button is clicked. The issue seems to be only confined to Firefox. Tested the issue on Internet Explorer 10 and Google Chrome and both are working as expected, showing the results on our results page.
I am using Windows 8, 64 bit, Firefox 30. The user having the issue is on Windows 7, 64 bit.
I used the Web console and there were an error message of
'TypeError: google.search.Search.apiary5337 is not a function'.
I am not sure this is the root of the issue or not, but why would this work in Chrome and Internet Explorer and not in Firefox?
If you need to check it, out website is http://www.dmns.org/ . The search box it on the top right of the page. You will see that the page redirects to our '/results?q=searchterm'. We are a science institution so if you type "science" in the search box, you will get redirected to the '/results' page with the query string of 'science' for the search term. But in my case the search results below are blank. If you do the same search if Chrome or IE the results show fine.
Oh, I do not have any add on installed on Firefox.
Any suggestions or a fix would be great.
Thank you.
Carlos MosquedaProblem SOLVED.
This is probably still a bug in Firefox. Our Google Search <script> that call the Javascript service from Google was within the Body tag. I moved the Script tag to the head and now it seems to work as expected. In the new Firefox, are <script> tags not allowed within the Body element? -
My position in OVI map not showing my correct posi...
I installed new version of OVI maps today.
when I clicked on "my position" , it is not not showing my position correctly,
why it is so? anybody has any experience?@gavin_street
If Nokia Maps have not been used for a while stored ephemeris GPS data is out of date or similarly if application updated data can become corrupted. You don't mention whether you are hapy for Assisted GPS postioning method to utilise a network access point to contact positioning server = supl.nokia.com or whether relying solely upon the Integrated GPS of device. Try going outside away from tall buildings if feasible, launch Nokia Maps and wait 20 - 30 minutes for it to lock on to position.
It might be an idea to download LeGPSData2 application from Nokia Store so you can keep track of number of satellites acquired:http://store.ovi.com/content/208256
Happy to have helped forum with a Support Ratio = 42.5 -
Dear SAP Guru,
My MAP is not showing perfect(Seams to me).
MAP = 8,270.59
Total Stock = 10,823.288
Total Value = 58,220,630.81
Possible MAP = Total Value(58,220,630.81) / Total Stock (10,823.288) = 5,379.20
But when I am doing GI, its takes 5,379.20 .
Will you please clear why it is showing the MAP = 8,270.59 and what are the possible reason.
Thanks for your advance co-operations.
Best Regards,
Shoyeb
Edited by: AMShoyeb on Feb 1, 2012 8:31 AMHi,
boss, what are the possible reason for changing the MAP from 4,679.20 to 8,270.59
check your Po price for material in Po as well as qty and check your material price ( stander ) in material master for this material
and analyze it you will get ans for same .
also read following link you will get goo idea about it
[MAP|Moving average price calculation logic of material with Price Control "S";
Regards
Kailas Ugale -
Hello
I have installed OC4J it is running the demo maps given in tutorials.
But it is not showing the base map.
can u suggest me somethingHi,
boss, what are the possible reason for changing the MAP from 4,679.20 to 8,270.59
check your Po price for material in Po as well as qty and check your material price ( stander ) in material master for this material
and analyze it you will get ans for same .
also read following link you will get goo idea about it
[MAP|Moving average price calculation logic of material with Price Control "S";
Regards
Kailas Ugale -
Ios 6 map not showing directions?
I using a iPhone 4 downloaded latest iOS in my phone but its not showing directions in map app please fix this.
If you mean that apple maps doesn't work very well in Saudi Arabia then you may find some answers here:
https://discussions.apple.com/thread/4311003?start=0&tstart=0
Sadly it doesn't give you the answer you might want but many hope that google maps will release an app soon -
I'm using iphoto 09, and suddenly, no maps are showing up in places. In the get info section of a photo, the location name still shows up, but there are no maps, no pins for the maps, etc. Anyone have any idea? The map area just shows up blank.
ThanksHi, I’ve found a similar topic with some advice. However, none of them has solved my problem with iPhoto ’09. My brother hasn’t got such problem in iPhoto ’11 on his Mac but I’ll wait for WWDC news before I decide to upgrade to ’11. Maybe our problem is related to the new stuff which is probably being tested now?
Maybe you are looking for
-
HP Wireless Print Server 2101nw
I recently upgraded to Snow Leopard and the wireless print server, HP 2101nw, no longer functions. I attempted without success to download and install and updated driver. I primarily use HP P1006 and on occasion HP PSC 1400. The wireless print server
-
Hello Folks, in previous projects we always went for collecting objects into transport by type buttom up e.g. 1. Infoobjects 2. Data Sources However, now we have enabled standard transport system and get prompts for every object creation. Which is co
-
Que about Simple Query Dump.....
Hiiii ABAPers.... Here with i am come again with a que and my que is : " While debugging a simple query with where clause i am getting dump...but when i set up a break point after 2 or 3 sentenses it is executed fine without any dump " It has shocked
-
Logic Pro issues with input putout
LP 9 Issues . Recently installed snow leopard . Now I'm finding LP9 will not input/output as it shouted .. I get input/output on one session after booting up the computer. When I close that session and open another I get no input/output. So far I've
-
Specify two conditions for button type: pl/sql function body return boolean
Hello, Can anyone help me out with this issue. I am using Oracle APEX 3.2 version. I have page zero select list with submit items P0_ITEM1, P0_ITEM2, P0_ITEM3 and i also have a button on page zero. Now I want to make this button conditional like only