Popup box in an internet service

Hi,
We are using SAP R3 version 4.6c.An internet service is already published on the web.My requirement is that a warning pop up comes up while entering some data through web in the internet service.I have done the relevant code changes and the pop up is appearing at the back end when I am running the service using trancastion but after publishing the service the pop up is not appearing on the web.
can anyone help??
Regards,
Moinak.

My idea is the following:
create a little pgm (to run on line) in which you call a selection screen and your users can insert what you need...then, your pgm will insert these parameters in a dedicated table (and before you can delete its previous content...); finally your program can raise an event that you can link to start a process chain that execute the dataload...
in the start routine, write the code that select the parameters from the table above-mentioned and... voilà !
No table maintenance is required and you can obtain what you want !
Hope it helps!
Bye,
Roberto
please don't forget to reward the answers...it's THE way to say thanks here...

Similar Messages

I recently changed my internet service provider and my e mail address. I updated my iTunes account with the new e mail. Now I cannot get updates on my devices, because the login box on each still contains my old e mail. How can I change this please?

I recently changed my internet service provider and my e mail address. I updated my iTunes account with the new e mail. Now I cannot get updates on my devices, because the login box on each device still contains my old e mail, and I do not know how to change this How can I change this please?

Try tapping on the id in Settings > iTunes & App Stores on your devices (Settings > Store if they aren't on iOS 6+) and then log back in and see if that 'refreshes' the account on them.

Email through a dialog popup box in ABAP

Hi all
We have a requirement where in a user click on a button on the screen , the system should respond with a popup box where in he can enter some text and send it as an email.
I looked at the function SOTR_DIALOG_SEND_EMAIL . It is able to bring in the popupbox , enter text and also has a button to send email But when I execute this function I am getting a ABAP dump.
Request your help on this. This seems to be the function I need to use but it fails.
Looking forward for some help,
Regards
Kumar

HI guys
Thanks for your reply.
Currently I got around my requirement using a SEND function in an ALV grid to enable the email service. But still I feel that is too complex for the user community and the need we are addressing.
I tried the other techniques too with popup edit and then a email FM module. All of them works but I still feel it is simpler for our application to bring in a popup with edit capability , a place to put in an internet address , and a send mail button which would be similar SOTR_DIALOG_SEND_EMAIL function. Unfortunately this function fails when I click send. May be I am making some mistake or not using it the way it should be.
The advises and the links send via your replies provided me with a wealth of information related to this topic , which I am sure will be very useful in other applications which would come in our way. I appareciate and thanks for your time taken in response to my query.
I request that If you or any one find some way or know of some way of combining popup / edit and send capability , let me know.
Regards
Kumar

How to open and modify a internet service.

I want to modify Internet Service PZ02. I checked in SICf, it is listed under bc/gui/sap/its and is also activated.
But when i go to SE80 and search for it in Internet Service, i get a message saying "Service PZ18 does not exist, create object? "
How do i open, get access to code of pz18 and modify it
Thanks
Sharath

Chris-
Thanks for the reply.
How do i create the ITS service (service file, template, theme etc..) out of the dynamically generated HR service PZ02.
Pleae let me know if the following steps are correct
1. In SE80, Choose Internet service and enter a name like zpz02.
2. In the pop-up for transaction code enter pz02. Check the box for ITS mixed mode
3. Then Right click in zpz02, select create->template->
assign theme=99,
program number-SAPMPZ02
screen number=1000
generating style=webgui
( The above informtaion was found out in the following way: go to se93 -> enter pz02 as the transaction code ->
click display.
When i did that it displayed the following info
program : SAPMPZ02
selection screen: 1000 )
When i click on save it says that the screen 1000 does not exist in the program SAPMPZ02.
But from the info that i got from the SE93 it looks like the screen number is 1000??
What is the mistake ?? Is the approach wrong
Help will be really appreciated
Sharath

TS3299 Upgade error: Could not open key: HKEY_CURRENT_USER\SOFTWARE\Apple Inc.\Internet Services. Any advice?

During a standard iTunes upgrade to the latest version (11.1.4 for Windows Vista), the installation failed with the following error message: Could not open key: HKEY_CURRENT_USER\SOFTWARE\Apple Inc.\Internet Services. Does anyone have any advice as to how I can fix this and reinstall iTunes? When I try to open iTunes I get the following message: iTunes.exe. This application has failed to start because MSCVR80.dll was not found. Re-installing the application may fix this problem. When I try to run the installer I get the above error so I'm going round in circles!

Solved: I had somehow lost permission to access the HKEY above (or rather, its parent key HKEY_CURRENT_USER\SOFTWARE\Apple Inc.) so I went to the registry editor and checked the 'Full Control' box for the key and the installer now works.
I used this site to fix the MSCVR80.dll error: http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm

No print dialogue popup box in Windows 7

Hello Everyone,
I am running Windows 7 with Adobe CS5 premium. All printers are working and printing outside of this program. I have changed
default printers back and forward, problem still exists. I created a label for school books, and when I go to print it out, no print dialogue
popup box appears. The print option is then greyed out until I reopen CS5. When I opening a desktop pic and open it in CS5 though
and go to print the popup box for printing appears, but their is a wait. I also tried to save my created document as something else
but I don't have any other options except PSD and some others I have never heard of. I have been using photoshop for sometime and
decided to upgrade from PS7 as not many brushes and the great new stuff out there is compatible. I feel like going back to PS7.
Can any one help me solve this, it would be appreciated. Thank you

Sorry it has taken me so long to respond. Printer drivers for Windows 7 have been installed correctly. It doesn't matter what brand printers are involved. The label printer is the one that has the smaller page size obviously -- brand can
be Cognitive, Godex or Zebra. All respond the same way. If you have the 8 1/2 x 11 printer set to the default printer but you want to print to the label printer about 5 or 6 labels spit out because it is trying to print 8 1/2 x 11 instead of 2.0
x 2.4. It works the opposite way if the label printer is set to the default. If you have the label printer set to the default it will print a tiny report on an 8 1/2 x 11 sheet of paper on the report printer. In this example it is a Canon,
but it doesn't matter what brand the report/invoice printer is. Keep in mind this is choosing the printer from Internet Explorer that you want to print to and even confirming that the printer preferences show correctly from the printer dialogue window
in IE. This is using IE9 but it happens in 8 as well. It DOES NOT happen in Microsoft Word, Chrome or Mozilla. I just sent a 2.0 x 2.4 Word document to the label printer when the default printer was set to the Canon and it print just fine.
I also sent a regular size document to the Canon with the label printer (RT200) set as the default. It also printed normal size. A person should be be able to attach 2 printers to a computer and print to either one from Internet Explorer
and have it use the print preferences assigned to their chosen printer regardless of whether it is set as the default or not. We developed our web-based application to use Internet Explorer so there are other issues that keep us from using another browser
--our customers are told that we only support IE, but if this doesn't get resolved we might have to change that.
Thank you for any help you are able to provide.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

New home but no apparent VZ internet services

I checked on the Verizon site to see if I can purchase internet services at my new home. Apparently, I can't (no internet service in the area).
What's strange is that there's a DSL box mounted on the outside of my home with 'Verizon' stamped onto it.
The home is 4 yrs old, so I can understand if services haven't been made available yet...but what's the deal with the DSL box already mounted. Pre-staging?

I went through a similar issue. On-line Verizon's web site said DSL was not available at my address. I called repair after a tree took out our phone line and got to talking with the repair man. When I asked him about DSL here, he thought for a moment and then said yes we should be able to get DSL. A telephone call to Verizon got our DSL ordered and installed with no problem.
We're about 12 miles from the city associated with our exchange. However there is a remote switch close to our location. My thought is that the Verizon web site looks at your location and the distance to the city associated with your exchange to determine if DSL is available at your address. It doesn't seem to take into account such things as remote switches. IMHO.

I have a Airport Extreme that is dropping the wireless signal alot (several times a day). The green light will go amber but the internet service (ethernet cable) will still be fine. The wireless icon on devices with go away.

I have a Airport Extreme that is dropping the wireless signal alot (several times a day) The green light will go amber, but the internet service is still ok if your using an ethernet cable directly plugged in. When the light goes amber all devices that is using wireless will lose there wireless icon. The only way to get the green light back is to unplug the Airport device and replug it back in. I tried the reset on the back but still no luck. What is the fix?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Best wireless modem/router for Comcast internet service?

Hello!
I am looking to switch internet service from Verizon DSL to Comcast. I have a MacBook Pro using Airport Extreme (supports 802.11 a/b/g/n), and my other computer is an iMac (OS 10.5.8, iMac 6,1), with a printer and a Roku box (I'm also thinking about switching to Apple TV). All are currently set-up wirelessly with a combined modem/router.
I know that there is a list of a bunch of potentials on the Comcast website, but I'm looking for real experience from Mac users. Good, bad or neutral comments are appreciated.
Thank you!
Ken

Don't pay Comcast monthly for a router. Buy a router. A router is a router, the best routers are Cisco based rackmount devices. Honestly the AirPort Express and Extreme are amazing and work quite well with Apple products. Plus if you purchase one and get AppleCare on it you get AWESOME support from your friendly AppleCare advisors... sure as **** beats going to India and talking to Fred.

Why am i renting boxes to utilize the service

I know this is how things are, but why do i need to rent boxes for my TV if i am already paying for the service. I don't rent the motor in the car that i bought. is there a way to use the service without renting boxes? or should i go back to the 60's and place an antenna on my roof and recieve the signal free? or just purchase an internet service and watch everything online? STOP RIPPING EVERYONE OFF!!!!!

Trysche wrote:
Wait, I am confused, and don't mean to hijack the thread, but I am getting FIOS installed today, as in NOW, they sent out one box that gets all the channels and menu and on demand, etc, and another that just get channels, then advised me that the standard digital converters that I got years ago when this mess started, would work for any TV that I don't want on demand or the menu on, like kids. From what I am reading it seems like this isn't the case? Or is this another thing like VZ's you can't keep Copper phone if you get FIOS Internet or TV? (which by the way it not true in MD, per the PSC, You can keep copper but add FIOS for TV and Internet only.)
If that is what someone told you, they were flat wrong! Hopefully you just misunderstood them.
The old digital converters that were sold in retail stores some years ago (and still are I think) are only for receiving digital TV signals over-the-air, and are for use with very, very old TVs that will not receive digital over-the-air TV. They will not work with any cable TV system, or with FiOS - period! Of course if you want to continue using the old converters with an antenna, you can do so for any TVs you don't want to connect to FiOS TV.
Verizon does offer a "digital adapter", the DCT-700, for use with FiOS. It will receive only the SD channels (all you are subscribed to), and has no Guide, no Widgets, no VOD. There is a monthly fee.
If the TV you want to connect has a QAM tuner (check the owners manual, relatively new TVs only), then you can hook that TV directly to the FiOS coax and receive the local channels only.
I hope this clarifies the situation.
I Have no clue what "mess" you are referring to from years ago....
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

Ordered new Internet service a month ago and still nothing!

At the end of August I placed an order to upgrade the speeds to my Internet (sounds good so far doesn't it verizon). Well it's now September 28 and I still haven't received anything from these people. I've called about 5 times in the past month, the first call I was told I don't need anything done because it's just an upgrade to speeds and should take hold within the day. The second call I was told I need a new o n t box (a211 instead of the box iI have now) and they would have to send a technician out to do so. The tech guy walks in my door looks at my router and says everything is fine and walks out the door. I check my service the next day and low and behold no upgrade. Call 3 "sorry about the inconvenience we'll be sure to fix the problem,transfer transfer transfer, the problem was we're seeing that the tech guy put in order completed but it's not showing the new o n t box was installed! We'll get a tech guy out ASAP! Day of installation nobody shows. No we're on call 4, (at this point I'm calling to cancel because this is absolutely ridiculous, three weeks have went by and I'm still waiting for the new service at which Verizon would be getting paid a higher rate from me and they are treating the situation as screw the customer we don't need him or his business) " we understand your frustration but if we can fix the problem would you be willing to try again? We can set up a new appointment for you ASAP and get your new service up and running. I will personally make sure the work gets done correctly as I am leaving notations in bold and all caps on your file. " I myself was exhausted by the ordeal but did want higher speeds on my Internet so I said" sure we can try again". This is where the biggest load of bull came in. The tech guys come to my house and state "the order that was put in was a repair job and not an installation so they can't do the work"! Are you **bleep** kidding me! Is this the way you people at Verizon do business! The worst part of it all is the fact that over the phone your reps seem to know what their doing but can't communicate it to the rest of your people to actually get the job done. UNACCEPTABLE! Call 5" once again I'm sorry for the inconvenience and the trouble we've caused I understand that you want to cancel by now and I would too if I was put through this ordeal but can we try one more time to rectify the situation, if we try I can offer bull**bleep** deal after bull**bleep** deal and get your new service installed at your discretion"? The kicker is I accepted the **bleep** deal because I really need a higher speed Internet. Let's see if they add more fuel to the fire or actually fix the issue. Verizon practices in customer service thus far has been absolutely deplorable. Try thinking about the customer for once and not your bottom line! If they do screw up again I will cancel service and go somewhere else for television and Internet service.

Since we haven't heard back from you or have received a form submission as requested in your private support case, it appears assistance is no longer required. If you need any future help with your Verizon service, please make a post here on the forums so we can assist.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Not connecting to the blackberry internet service

hi, my blackberry has been working fine for weeks but for for the past week my internet service won't connect at all, in the top corner it just says GSM and ive tried everything i can think of, restarting the phone, turning the network on and off but nothing is working. it either says GSM or SOS. its supposed to say EDGE but its hasnt changed at all. what would any of you recommend? my network is tesco so if anyone knows a way to sort it out, please let me know - harry

Under the mobile network options, do you see a box that says "network selection mode?"
Can you change that to EDGE if possible? If you can't change these, give your carrier a call
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt

Message uses a character set that is not supported by the internet service

Does any one have any advice on how to fix this problem?
E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
I have also upgraded to 2.01 and restored a few times without impact.

Hi,
I got somewhat similar problem with special charecters(German umlaud �,�,�..).
I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource(fileName);
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(output.getName());
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp2);
msg.setContent(mp);
Transport.send(msg);
From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
Can you tell me what might be wrong in my code.
I appriciate your efforts in advance.
Prasad

Popup box in an internet service

Similar Messages

Maybe you are looking for