Profit Center to be populated in documents already posted

Hi,
I work for a retail client. There is a store that went live about a week back. There is a validation applied, which updates a profit center to the tender GL accounts (differnet kinds of revenue - like cash/credit card/debit card/sodexho etc) .
As the validation was missed to be transported - profit center is not to be found in tender documents. Is there a way out that I get the profit center updated to the tender documents that have been posted until now. In other words update of profit center in the documents already posted.
Regards,
Soujanya.

hai
Profit center never gets updated in Table BSIK and BSAK ...You will never get it in FBL1N..Please use KE5Z or S_ALR_87013346 or S_ACO_52000888 Payables - Profit center as an alternate ..
As you must be aware that profit Center information is never entered in Vendor in line item. It is only entered in the expense/income line items...You will always find this field blank in BSIK ...BSIK and BSAK segmentation table is BSEG , PRCTR is there hence it can be set in O7R3 as a special field to be displayed in ledger but it will not show values. I hope it clears you.
Thanks and regards

Similar Messages

Profit Center is not populating in SPL document

Hi
Would be highly obliged if some one can suggest on the following issue,
_Information related to issue:_
1) SPL Activated
2) Document split activated in SPL
3) SAP ECC 6 (No New GL and splitting activated)
_Issue_
Profit Center is not populating against Recon account line item in the SPL document, generated from Vendor Invoice posting (FB60) in FI, in fact the document splitting is activated for this very reason in SPL, but still the derivation is not happening for recon account line item.
Can some one suggest how the profit center can be derived against recon account line item in SPL document.
Regards
Ashwin

Hi Ashwin,
Whenever you post the issue to the SDN please give the scenario as well means which is the spl document you are posting
With regards,
Venkatakrishna

When bsik table profit center will be populated?

can any one tell me when bsik table profit center will get populated?.
we r doing fb60, miro?.
so we want to see the profit center value in bsik table.
Thanks in advance

Hi Suresh,
The actual table updated will be BSEG only but you will find the same document # in BSIK table if it is a open vendor items else if it is closed (i.e. payment for the invoice has been done to vendor), you will find it in BSAK table.
Basically, BSIK(Open items) and BSAK(Closed items) are a secondary index tables for BSEG table. Whenever you update the profit center(PRCTR) in an accounting doc, you will find it in BSEG table. But its index will also be in BSIK table if it is still an open item.
Cheers,
Vikram
Pls reward for helpful replies!!

Profit Center is missing in Billing document

Hi,
I am trying to create Intercompany billing document IV with reference to Cross replenishment delivery type NLCC,
I am getting the following error:
"Profit center US01/ TP3870 does not exist for 03/23/2011"
Actually, profit Cetner 6045TP3870 is maintained in MMR and same as fed into Delivery document
but while creating billing document the above error is coming
the preceeding number 6045 is missing in billing doc.. system is picking only TP3870...
So please advice what could be the reason the specifid profit center is missing in billing document
Thanks in advance,

Hi,
If Profit Center has been marked as mandatory for the posting, you can face this kind of error before posting the Invoice.
Please check the Profit Center maintained at followings:
1) Material Master
2) Sales Order ->Item Data->Account assignment-> Profit Center.
3) OKB9-> for respective G/L Accounts.
Please check with your FICO consultant, he will surely have better idea on the same.
Thank You,
RB.

Wrong profit center capture in the billing document of intercompany sales

Hi Experts,
     I am facing a problem on the incorrect profit center capture in the billing document while billing to external customer. I did try to search SAP notes found that it can be use substitution user exit to correct it. So I try to find out the substitutions by T-code GBB1 in the folder "profit center accounting" under create sale order.
The problem is how to maintain the substitution? Besides that did any one knows how to write the user exit for this substitution. I will appreciate if you can give me some sample program. Thanks in advance.
Regards,
Jennie Tan

Hi,
Refer to program RGGBS000 FORM u100. Your user exit has to be modelled along those lines. Change the select statement to select the profit center from the material master using the material number field (PCASUB-MATNR) and plant (PCASUB-WERKS). Move this profit center to the profit center field (PCASUB-PRCTR).
Copy RGGBS000 to ZGGBS000 and then write this code.
Just writing this out of my mind. Get an abaper to help you with this.
TABLES: MBEW.
DATA: WA_MARC TYPE MARC.
exits-name = 'U345'.
exits-param = c_exit_param_none.
exits-title = 'profit center subs'.
APPEND exits.
FORM u345.
SELECT * FROM MARC INTO WA_MARC WHERE MATNR = PCASUB-MATNR AND WERKS = PCASUB-WERKS.
IF SY-SUBRC = 0.
   MOVE WA_MARC-PRCTC TO PCASUB-PRCTR.
ENDIF.
ENDFORM.
In SM30 table V_T80D assign the program ZGGBS000 to application area GBLS.
Then write your substitution in 0KEM. Make sure in TCode 0KEL the the activation level is 1 or 3.
Thanks and Regards
Shivram.

Different Profit Center in GR and Invoice Document

Hi,
I have a query in the Purchase order cycle.
The Profit Center Accounting document has a different Profit Center in the Goods Receipt Document and Invoice Receipt Document. I found that in the case of GR it picks up the Profit Center from Material Master, whereas in the Invoice document it picks up from the Sales Order (MTO Scenario). Hence there is a mismatch.
Please advise on how i can have a same Profit Center. Where do i need to make necessary corrections.
Thanks in Advance,
Safi

Hi
in general sales order picks profit center from material master so same profit center is possible when doing GR /IR Plz chek it
thanks
MvNr

Profit center issue in MIGO FI docuement

Dear all
We have created material 123456 with material type ROH. We have assigned profit center XYZ (common profit center) to material.
2) We have created WBS element MUM-RIV002F with profit center ABC
3) We have created PO 4000000236 for account assignment category u2018Qu2019 for the above material with WBS element MUM-RIV002F . After posting GRN for PO 4000000236 we have identified that for GR/IR account profit center is taken from material master XYZ & for stock account profit center is taken from WBS element.ABC
But our requirement is that GR/IR profit center should take from WBS element not from material master
Regards
Kailas Ugale

Hi,
Profit Center for GI / IR account during MIGO posting will be defaulted from material master as per SAP standard process.
probable you have to apply enhancement to update profit center from WBS element.check with technical consultant on the same.
Best Regards
Sanjay Dhanani

Require Profit center to populate in FI after Pyroll posting

Hi,
Experts require your help as this is an immidiate requirement.
I am trying to get the profit center display in FI tcode (FS10n)after posting to FI.
I have run the payroll and posted to accounting but the profit center is not getting displayed in FI for some G/L accounts.
I have checked the configuration, the symbolic accounts and the account assignment seems to be correct and the cost centers (or profit center)is already assigned at OM level too.
I am trying to find the default seeting of profit center in HR .
Could you please help me in this regard.
Thanks in advance.
Sunita

Hello Rishikesh,
Please use the "Capture and post" option in migo for exicse invoice if you are using New G/L with profit centre.
Regards

Profit center document created but profit center not updated in FI document

Hi Experts,
I have a strange issue; we created FI document via billing document (SD) where in profit center document got created but profit center is not updated in FI document.
We have separate table to identify the profit center by customer.
Please let know what could be the cause or reason for this kind of scenario
Thanks,
VK

Hi Krishna,
Though ur question seems very old, but now i got the same requirement as like you.
So if you remeber what needs to be done for this issue thats very good help to me.
My Requirement is : I have created Service Entry Sheet by referring PO and while releasing this Service Entry Sheet system is generating MIGO Doc and FI documents in background.
And I have updated PERNR (Persnoal No.) in MSEG-SGTXT by using enhancment but it's not populating in BSEG-SGTXT.
And I found an internal table while debugging i.e ; like ACCIT (not exactly ,similar to this ) where i have updated pernr and sgtxt but same thing will not available in FI Doc display (BSEG-PERNR or BSEG-SGTXG)
So could you plz suggest what needs to be done to achieve this. Im assuming that, is it possible through BTE (Business Transaction Events) ?. if yes, plz tell me how to proceed.
Thanks
Madhan

Change Segment in Profit center to which the data has already been posted

Hi,
Is it possible to change Segment in a Profit Center to which the transaction data has already been posted.
Regards,
SAPFICO

Hi,
The segment can't be changed in the profit center once the document has been posted. But you can create a new profit center with new validity periods with new segment.
Regards,
SMuvva

Profit center substitution in Goods issue document

Hello Gurus
I am determining profit center through the profit center substitution in sales order through 0KEM transaction and activated it in 0KEL as activation 3.
I have taken the fields as sales organization and sales office with transaction code VA01 and VL02N .
After this the substitution happening in sales order and also in delivery but the substitution is not reflecting in the goods issue document neither coming for inventory nor in COGS anyway but it is reflecting in the FI accounting document but not for customer but for sales.
Please help me to with your kind suggestion for resolving this issue.
I need the substituted Profit center also to come in the accounting document of PGI and for customer in FI accounting document.
Thanks in advance
Subu

Hi Subbu
1. 0KEM works for sales order and related billing.. It does not work for PGI, unless you are in MTO scenario and sales order is CO object
2. At PGI - Inventory a/c will be Cr with PC in Mat Master... COGS (If not a cost element) will also be Dr with the same PC
If you are in MTO, the COGS will be posted to sales order and hence, it will have the same PC as sales order
3. During Billing, revenue a/c is Cr with PC in sales order... Customer line is never shown with PC in the line item....
- If you are on EC-PCA, you need to run 1KEK at month end...
- If you are on New GL + Doc Splitting, PC will be shown in the "General Ledger View" in customer line item... the "Entry View" wont have any PC
BR,Ajay M

Profit Center not picked in Payment documents

The problem concerns incoming payment with clearing invoices, in the same time, the profit center is
not taken automatically from invoice to payment document. How can the same be achieved.

Dear Sir and Madam.
the configuration Team has to Enable the concepts on Profit Center that can be able to Pick,.
They enabled the Cost Center are Bus area.
Please Check this two is Active that is not required to get the reports
Thanks and Regards
N,.Soma Sundaram

Can profit center report drilldowen to the document entry level

Hi,
In Profit center Reporting can we drill down to the document entry level if yes how we can prepare this kind of reports.
Thanking you.
Regards
Santosh Rothe

Hi Santosh,
Yes,
Click 2 times on the line (amount) or use the menu path Report / Other report
In the most standard reports you can drill down.
When not you can ad reports, line item overvieuw to the Report group
Transaction GR52 go to the header and under Report interface you can ad other reports or line item transaction codes
Paul

Profit Center in New GL with Document Splitting

Hi
As per my understanding, from ECC 5.0 onwards you are forced to use New GL, and we are also planning to use Document splitting as some of the period end closing of profit center accounting are avoided.
Further I want to add that since document splitting is active, the old profit center tables GLPCA & GLPCT are not updated. The profit center details are updated in FAGLEXT, FAGLEXP & FAGLEXA tables.
I need clarifications for the following: -
1. How do I plan for the profit centers Profit Center & Balance sheets
2. How do I do profit center Plan / Actual Assessments / Distributions
Kindly clarify.
Regards,
Suraj

I am also facing the same issue. Can anyone please guide how to handle the AUC downpayments made in the legacy system to SAP?
The solution I thought of is just create a special GL indicater for AUC downpayments and post the vendor payments in F-48. Please guide is this the complete solution? We are using the Internal Order for AUC with investment measure.

COGS Profit center field is missing in documents row

Hi all!
in Form settings of 'Delivery', i m not able to find <i>Profit Center</i> and <i>COGS Profit Centers</i> columns under Table Format tab?
Do any one have any idea?
Meera.

Our SBO is of 2005B PL05 SP 00 / Ver 7.40.243
I hav checked Form Settings --> Document tab / Table sub-tab of Delivery document. i can see the 'dimension' fields and 'COGS Profit Center' field there.
i did assign values from list of Distribution rules. but when adding the document, an error is thrown
stating '[Delivery - Rows - COGS Profit Center Code][line: 1] , 'The connected value 'C_01' was not found in table' and restricts from adding the document. what might be the reason?
Plz any one help.
Meera.

Profit Center to be populated in documents already posted

Similar Messages

Maybe you are looking for