Portal login fails without error

Hello
We are working with Oracle Application Server 10g on Linux. Currently we have some problems with login through the login portlet.
After starting the Application Server, the login goes right. But after some time of inactivity (about 1h) it is no longer possible to login. After clicking the Login button of the login portlet some time goes on but nothing happens. No error message or something else appears.
Has someone else such a problem?
Can anybody help me?
Regards,
Chrigel

Similar Messages

Build fail without errors

I've been getting often enough strange compilation errors from the labview application status window, the weirdest being
[10:30:36 AM] Status: Error
linking...
Program Size: Code=94136 RO-data=2936 RW-data=2664 ZI-data=14536
".\Obj\LabVIEW.axf" - 0 Error(s), 0 Warning(s).
Status: Build failed.
The build failure without errors seems to be a red herring; it actually builds and links fine, but for some reason Labview takes offense to it and reports a build failure. If you rerun the build again it resumes where it had "failed" and the target is loaded and started... very strange behaviour, and it is not limited to the LM3S project, I get it with the MCB2378. Anybody knows why this would happen?
Anyway just putting this out there for others who would encounter this problem.

Hey Simon,
When you reload the code and it compiles correctly does it operatre as expected? Here are some things that I believe we have gone over but should be useful for other members of the forums:
Debugging in Keil uVision
After c generating an embedded application, you should have the project loaded in the Keil uVision IDE. The following steps will help you debug the application.
Click "Reset CPU"
Click "Run"
Click "Halt."
You should be stopped in a loop in a function named OCDI_RDMWaitOnStart in OCDICheckPoint.c. The function waits for LabVIEW to be ready by checking the variable named OCDI_RDMStart. Since we are not using LabVIEW to run the application, we need to change this variable manually using the watch window.
Add the variable OCDI_RDMStart to the watch window.
Set any other breakpoints that you want in the project.
Select View->Period Window Updates
Click "Run"
From the watch window, change the variable OCDI_RDMStart to 0x01. The application will exit the loop and run your VI.
To run the application again:
Click "Reset CPU"
Click "Run"
From the watch window, change the variable OCDI_RDMStart to 0x01.
You can also add "one button dialog" nodes to your VI, and this will do a printf that you can see in the Keil IDE. Choose View->Serial Window->Real-Time Agent Terminal to see the window that receives the output.
My guess is that the first time you run it the project is looking for a pointer or something and then the second time it know knows where it is and finishes without error.
Sam S
Applications Engineer
National Instruments

Logging into AppleID for FaceTime & iMessage fails without error

I want to setup FaceTime and iMessage.
I have an Apple ID that is an email address other than ME.COM. The address is verified and I use it to log into iTunes and iCloud.
When I try to log in with the apple ID, the screen moves forward to the email address screen, but then goes right back to the login page without an error. Nothing I have been able tomtrynhas made it log in. I even attempted to do the login on another iPad and it worked fine. So it's apparently something with that iPad.
I have reset the iPad, tried forcing FaceTime and iMessage closed, but not sure what else I can do. I'd like to avoid doing a full reset and restore. So if there is anything else I can try, I want to go down that road first.
Thanks,
Steve

I don't know if this will work, but it's far less of PITA than restoring the iPad to factory settings. Have you tried resetting all settings?
Settings>General>Reset>Reset all settings. I don't know if that will reset FaceTime and Messages, but you will have to set up all of your app preferences and iPad preferences again if you try it. Not nearly as much work as restoring though.

Portal login failed due to Desktop error

Hi all
we are using EP 7.0.
Accidently we made a wrong entry in the master rule for portal desktop.The entry is defined for "*" (that means for all users).
Now nobody can log into portal.
How am i suppose to correct that entry?Is there any way to do it using Visual Administrator?
very urgent
Thanks in advance
regards
shankar

Hi Steffi,
Issue is resolved.
I didn't deleted any entries in the master rule.
To access Content admin using below direct 1st URL, once you logon into the url and then enter second url and modify the master rule.
http://portal:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.content_administration!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content
Access System admin using below direct URL to access Master Rule Collection to fix the wrong rules.
http://portal:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.system_administration!2fcom.sap.portal.system_admin_ws!2fcom.sap.portal.system_configuration!2fcom.sap.portal.portal.display!2fcom.sap.portal.wd_portalDisplayRules
Thank you for your support!!
Thanks,
Naveen

In portal login java runtime error --

Hi all,
I tried to login to the portal page.But its suddenly throwing an java runtime error.
Its like the same issue in forum
/thread/26144 [original link is broken]
please have a look of this forum.
regards
Vijay

Hi Vijay,
Problem is with the standard java users,
Check the status of the ff. and if you choose, try changing the passwords
SAPJSF, SLDAPIUSER, SLDSUSER, J2EE_ADMIN and J2EE_GUEST are the common standard users of the Java Systems.
Regards,
Jeff

Connection to X fails without error messages

Hi all,
I'm having serious problems with a newly installed arch. I'm setting up a laptop for a friend with pretty much the same configurations as I have myself- except that I didn't have this problem.
I installed X, KDE, made configurations, started KDE customized things, logged out and couldn't log back in. The splash screen won't pass "initializing system services". These are the steps I've taken in order to troubleshoot:
1) I created a new user in order eliminate setting-issues with one particular user.
2) I've tried running startx instead of KDE, of course. I get a cursor and then I'm instantly returned to console. This reminds me much of problems with pseudo terminals, especially since kdm starts fine. But..
3) I've checked that I have /dev/pts mounted
4) /dev/null has the appropriate permission
The worst thing is that when I'm returned to console, I don't get any error messages. Neither can I spot anything with "cat /var/log/Xorg.0.log | grep EE" or "cat /var/log/Xorg.0.log | grep WW". Dmesg doesn't yield anything either.
I'm really clueless here. Any ideas?
(I use udev, by the way)

OK; this is so crazy, I can only laugh. Nothing like this ever happened me before: Before trying your suggestions, I tried startx one more time, and for some reason it worked. So I decided to restart the computer and see what happens. When system was back up, I couldn't even start kdm. I took a look around and it turned out there was no "X" in my paths. Weird, since echo $PATH clearly showed /usr/X11R6/bin. So, I try to chdir to /usr/X11R6/bin, but I got permission denied, as root! I can't even run "ls /usr/X11R6" without getting permission denied. ls shows the other two dirs there, but not bin. That's just so weird. And I can't reinstall Xorg, cause that requires write permissions to those dirs...

TM fails without error message

After about 7 GB of 57 GB I find TM has stopped but without any error messages. I have used disk utility to re-format my LaCie HDD but same result. Then excluded all folders other than Pictures and OK. But I want to back-up everything. Any ideas....thanks.

as I said two times already, I am using Windows 2012R2. Also, as I mentioned in my previous post, a non-standard multiplicator seems to have been the reason for the fault.
Is this an answer to my question, or did you by mistake reply in the wrong thread?
What is an "always" block?
I am using genereate statements regularly, usually with the size of up to 32, since it is a design with 32 parallel ADC channels.
Also, the machine on which it initially didn't work has 32GB RAM, while my small notebook on which it worked has 6GB RAM. I think it is unlikely that memory is the cause. The memory recommendation according to your link is below 4GB for XC7K160T.
As far as I can see, there is no answer record 59931: http://www.xilinx.com/support/answers/59931.html
Since the problem seems to have been on the systems hardware side (non-default CPU multiplicator), I will close this thread. If I encounter a similar problem again, I now know the appropriate steps to take before opening a thread.
Thanks again,
Johannes

Inserts Fail without Error Message

I have a Java program which uses a Connection and Statement to insert records into the database. It has been working great. The last couple of days it has been failing, and no Exceptions are returned. I tried increasing the tablespace and it still randomly fails.
Suggestions?
try {
     conn = DBUtil.getConnection();
     s = conn.createStatement();
     res = s.executeUpdate(insertValue.toString());
} catch (SQLException e)
throw new SQLException("SQL Error in: " + e.toString() + " " +insertValue.toString());
} catch (Exception e)
throw new Exception("Error in: " + e.toString() + " " +insertValue.toString());
}//catch

Same thing happened to me. I called Apple and got some advice that worked. Make sure iDVD is not open at the time and be prepared to shutdown your computer after applying the following:
1. Go to the your User>Library>Preferences folder. Find the file: com.apple.iDVD.plist and move it to your desktop.
2. Go to the User>Library>Caches folder. Find the folder com.apple.iDVD and move it to your desktop. (These files will get recreated upon reopening iDVD, so they really aren't that important, but putting them on the desktop will allow you to reference them if need be)
3. Then you shutdown your computer in order to rebuild the power settings.
4. Unplug your computer from the power cord. Remove your battery. Then hold down the power button for 5 seconds
5. Put the battery back in, plug back in the computer and turn back on the power
6. Try burning your project again.
This worked for me and the whole burn process went MUCH faster that before (meaning all the preceding rendering and preparation steps before the actual burn step also went much faster).
Hope the same solution works for you!

Acrobat XI: Printing to networked printer fails without error message

I'm using Windows 8 Professional.
When I use Acrobat XI Professional or Reader XI to print to a networked printer, Acrobat and Reader throw up the Progress dialog, showing the document is getting spooled. However, nothing appears in my printer's status window and nothing gets printed. There are no error messages.
When I use Windows 8 Pro's Reader app to print to the networked printer, it works just fine.
I thus have a workaround, so not all is lost.
However, how do I diagnose why only the Adobe applications on my computer can't use the networked printer?
-- Tim
Timothy J. McGowan

Thanks for the advice.
The problem is not solved. This is what i have tried.
Attempt 1.
Log-in as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
"Repair" Adobe Acrobat XI Pro installation.
Same failure as described earlier.
Attempt 2.
Log-in as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
Uninstall Acro XI Pro.
Run : acrobat_ittools_cleaner_p1_040612.zip
Log of "cleaner" shows deletion of very many, but ot all, Registry Acro-associated keys.
At end of uninstall and cleaner processes, re-start machine.
Log-in again as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
Disable Norton 360 and Webroot Secure Anywhere prior to Acro XI Pro installation.
Re-install Acro XI Pro (this time, for "Default" choice, as opposed to "Complete" in previous installs.)
Outcome: NO Adobe PDF printer. HOWEVER, both during the "Repair" and re-install processes, a message did flash: "Creating the Adobe PDF Printer".
Both Repair and re-install: The Adobe PDF printer is not listed under "Manufacturer" when "Add Printer" is executed (see image below).
Proceeding via "Have Disk", C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf, yields the failure to install the driver previously described, for all ten (10) instance of the Adobe PDF Converter options.
Thanks for any insights.

Install fails without error message

I see a few other threads with installation failures, but none match my symptoms. I have 64-bit CS5 Extended on Windows 7.
I downloaded pixelbenderplugin_p2_64bit_090910.mxp and executed it to install.This brought up the CS5 Extension Manager as expected, but then nothing happened. There is no sign of Pixel Bender when I select either Photoshop product from EM's list of products. There is no error message that I can see.Just to make sure it wasn't actually installed, I verified that the Photoshop Filter menu does not show a Pixel Bender item.
I also tried opening the mxp using Extension Manager's File/Install Extension menu. Same effect. It seems to open the file but doesn't do anything with it.
How should I diagnose this problem?
Thanks!

I don't think there's anything really unusual about my installation. Maybe a few extra add-ins, but nothing really weird as far as I know. I keep it all updated. I also use Avast Antivirus and Spybot Search and Destroy, both of which are up-to-date.
My Firefox is version 3.6.10, running on 64-bit Windows 7.
"Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10"
Extensions:
BetterPrivacy 1.48.3
CookieSafe 3.0.5
Flash and Video Download 0.1
Java Console 6.0.20
Java Console 6.0.21
Web Developer 1.1.8
Add-ons:
Wacom Dynamic Link Library 1.1.0.3
Adobe Acrobat 9.3.4.218
DivX Player Netscape Plugin 6.1.0.0
DivX Web Player 2.0.3.4
Google Talk Plugin 1.4.2.0
Google Talk Plugin Video Accelerator 0.1.43.3
iTunes Application Detector 1.0.1.1
Java Deployment Toolkit 6.0.210.7
Java(TM) Platform SE 6 U21 6.0.210.7
Microsoft Office 2010 14.0.4730.1010
Microsoft Windows Media Player Firefox Plugin 1.0.0.8
Mozilla Default Plug-in 1.0.0.15
Musicnotes 1.18.4.0
QuickTime Plug-in 7.6.8.0
ScorchPlugin 6.1.5.22
Shockwave Flash 10.1.82.76
Silverlight Plug-In 4.0.50917.0
Windows Genuine Advantage 1.9.42.0

Dw update keeps fail without error masage

I just update my account from student trail to student 29.99 per have 11-12 updates and Dw keeps failing

Hi pfgabe64,
Please let us know what error you are getting while updating Dreamweaver.
Regards,
Abhijit

Dac 10g etl plan fails without error

Hi
The dac execution plan fails all of a sudden with no failed tasks. There are about 460 tasks in the plan and 300 of them run fine and the rest are just remaining in the Stopped phase. They have a status meassage description like "One or more of the tasks that this task depended did not notify of completion. Stopping.".
I do not see any failed tasks and do not understand where is the fault. I have re assembled subject areas, re generated the parameters and re built the execution plan, but still no luck. On looking the dac etl plan log file I found a message like "896514 SEVERE Thu Nov 24 23:39:10 EST 2011 DANGER: We will hang..."
Please help me if any one has seen this message before.
Thanks
MNRK

Patch 14306642: DAC 10.1.3.4.1 CUMULATIVE PATCH FOR BI APPS - JUL 2012
Shutdown DAC server.
Apply this patch
Patch 14306642: DAC 10.1.3.4.1 CUMULATIVE PATCH FOR BI APPS - JUL 2012
You can download it from the My Oracle Support.
I faced the same and fixed it by applying the cummulative patch.
Mark it as correct if it resolves your issue.
Regards,
Veeresh Rayan

OnPlus Portal Logins fail

Dear OnPlus Users,
You may have briefly experienced a problem logging into cisco-onplus.com and/or onplusbeta.com. This issue has now been fixed, and Cisco OnPlus is now fully functional.
We thank you for your cooperation during our resolution of this issue.
OnPlus site status is available on our Service Health Status page at: www.checkonplus.com .
Thank you,
Anna

I actually did find a solution to my request for the ability to always sort by a different column, other than Created On Date. I selected Customize on the Overview page and unselected the Create On Date column. Then I sorted by the Company Name, which was the one I desired. So far, after closing out and going back in numerous times, it seems to keep that setting.

Not able to pass portal login page with valid credentials using WebDispatch

Hi,
We are implementing SAP BillerDirect Portal. To make BillerDirect Portal available over the internet, we Configured SAP WebDispatcher with SSL termination. We followed the steps mentioned in SAP Help Documentaion for SAP WebDispatcher with SSL termination.
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/6d4fa247d0d647b5bd40745400d873/frameset.htm
We created certificate and send it to CA (TrustCenter CA). We received the CA response and we imported the certificate.
AS mentioned in the help document, we configured the SAP Web Dispatcher profile to support SSL termination
We tried to access our BillerDirect Portal over the internet using below link
https://company.com/bd
We are getting login page, once we enter correct user ID and Password, portal is not loading (not going to next page) portal remains on same login page.
If we enter invalid credentials portal login page is giving u201CUser Authentication Failedu201D error.
If we try to access any portal login pages which brings a pop-up for login, login gets succeeded and we are able to see next pages
Examples
1) https://company.com/bd/admin/xcm/init.do
2) https://company.com/monitoring/SystemInfo
All pages which bring up portal login page without pop-up, not able to pass through portal login screen.
We Tried the ProxyMapping option on Dispatcher using Visual admin. This option also didnu2019t work for us.
Here is the WebDispatcher Profile
SAPSYSTEMNAME = xxx
SAPGLOBALHOST = xxxxx
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = hostnameofportalserver with FQDN
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=443
icm/server_port_1 = PROT=HTTP,PORT=80
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=D:\usr\sap\xxx\W00\data\icmanroot\admin,AUTHFILE= D:\usr\sap\xxx\SYS\global\security\data\icmauth.txt
Parameters for the SAP Cryptographic Library
ssl/ssl_lib = D:\usr\sap\xxxW00\sapcrypto.dll
ssl/server_pse = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/name = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/ssfapi_lib = D:\usr\sap\xxx\W00\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\xxx\W00\sapcrypto.dll
wdisp/ssl_cred = D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
Parameters for Using SSL to the backend server
wdisp/ssl_encrypt = 1
wdisp/ssl_auth = 1
wdisp/ssl_cred = D:\usr\sap\xxxW00\sec\SAPSSLC.pse
wdisp/ssl_certhost = hostnameofportalserver with FQDN
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTP/j2ee_0 = PREFIX=/, HOST =hostnameofportalserver with FQDN PORT=50000,SPORT=50001, SSLENC=1,TYPE=1, CRED =D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
We also tried below options in WebDispatcher profile but we are getting same problem.
wdisp/add_client_protocol_header = true
wdisp/add_clientprotocol_header = 1
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = *
icm/HTTPS/trust_client_with_subject = *
we also tried
wdisp/ssl_encrypt = 0
wdisp/ssl_auth = 0
we also tried
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 2
We are not able to resolve issue. Please help us on resolving this issue.
Thanks
Praveen

' in Host Names is not allowed. Our hosname has '_'.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm

Custom Login - Failed login

We need to run some checks against our business rules at login
time so I have written a custom login page which calls a custom
procedure. The procedure determines how much access the user is
entitled to and sets the users group memmbership accordingly.
Finally I call the Portal login procedure with the username and
password that the user provided:
portal30.wwptl_login.login_url(USERNAME,
PASSWORD,
OK_URL,
cancel_URL);
This works ok if the user has typed in a valid username +
password. But if the Portal login fails the user gets thrown to
the Single Sign-On screen. If the user now fixes his typo and
log in again he/she bypasses the whole custom login procedure...
The only way I can think of right now is to change the Single
Sign-On screen, which I know is possible. But that will apply to
the whole Portal installation and we do need several different
custom login's, similar to the one outlined above. So we would
have to change the Single Sign-On screen just have some text
telling the user to login using one of the official login pages.
Not very nice - but a possible solution.
It would be nice if you could specify a URL to the login
procedure for the case of a failed login. Is this something that
is being concidered for future versions of Portal?
Hmmm.. in case a user bookmarks a page that is not public he/she
will still be taken to the Single Sign-On page to login. Guess
we have to change the Single Sign-On screen after all..
Any other ideas?

You should develop customized login page according to the
specification provided in the SSO Server administrator guideHello
Where can i find the SSO Server administrator guide ??
Thanks
ERIC

Portal login fails without error

Similar Messages

Maybe you are looking for