Portal Theme - not able to replace horizontal divider

Hi All,
I want to replace the blue colored bar under the TLN. But I am not able to do so.
I tried changing it through Theme -> Horizontal Divider but it takes the blue color again. (Separator.gif)
I am also trying to modify it thru com.sap.portal.navigation.toplevel.par but I am not getting where to change it. I am unable to find where exactly it refers to the bar.
Please guide where should I change in the par file . Any pointers will be helpful.
Regards
Shilpa Bhanot

Hi,
one CRUDE method is, right click on the 'blue colored bar' and click properties. By this method u can identify image name atleast if nothing else. In com.sap.portal.navigation.toplevel.par ; search for the image.
Regards,
Ganga

Similar Messages

New Portal Theme not showing up in list

Hello fellow experts,
I'm using EP 7 sp10...I've created a new portal theme, it shows up on the Portal Display page, under my Themes, however it does not show up in the drop down list (Content admin/Portal Content/portal users/standard portal users/every user core role) as an option for a portal theme...
Please advise!
Sincerely,

Hi Scott,
Please very these steps,
Themes:
System Administration
              -->
         Portal Display
                        -->
                    Theme Editor
                              -->
                          Choose a Theme
                                      -->
                                      Make Changes
                                        If Any
                                                 --> Save It
                                                            -->
                                                            Desktop and
                                                             Display Rules
                                                                      -->
                                                                      Portal Content
--->
                                                                      Portal Users
                                                                      <--
                                                             Standard Portal
                                                                   Users
                                                             <--
                                                        Copy [Default Frame
                                                         Work Page & Desktop]
                                                    <--
                                          Paste it In a New Folder
                                        Rename the Desktop
                                       <--
                                         1).Open The Renamed Desktop
                                         2). Open Folder Themes (sys) and R.C
                                         3).Add theme to DESKTOP.
                                         4) Save it.
                                         <--
                                 Open ->portal Admin -> SuperADmin
                              <--
                      Open -> Master Role Collection
                      <--
                Select a Role/user/group from Master Role Collection
             <--
          R.c on Renamed Desktop and add Portal Desktop To Expression".
        <--
   Open Renamed Dektop,Select the theme,
    <--
Hit the Button "Set Default" (save)
   <--
Logoff and Logon the Portal Page.
Regards,
Ramganesan K.

Portal theme not picked for SAP Web Dynpro Iview

Hi,
We have used light framework page for our portal and all the iviews display the content within the iviews in the same set of colors (blue for buttons). However, for a WD java content, I have created an SAP Web Dynpro iView and the contents displayed here appear in the SAP colors without picking those set for the portal.
The same application parameters display the portal colors when we use the Web Dynpro Proxy iview.
Any idea how I can make the SAP Web Dynpro iView appear like the other portal iviews?
Note: The stylesheet property for the iview is already entered (ur), and I have also set the 'Supply Portal stylesheet' property to 'Yes'.
Please provide your inputs.
Thanks,
Vinay

Hi ,
In ABAP Webdynpro for similar problem we used WDFORCEEXTERNAL Sheet property of WDA.
The Web Dynpro framework automatically compares the versions of the portal and Web Dynpro
for ABAP style sheets. If the Web Dynpro for ABAP has a newer version, the WDA style sheet is used. This avoids unattractive rendering and JavaScript errors.You can deactivate this behavior again using the WDFORCEEXTERNALSTYLESHEET application parameter of WDA.See also SAP Notes 1033496 .
If you use the stylesheet of the portal to display the application, the rendering may not appear correctly and Javascript errors can occur(If portal style sheet is lower than WD).
Though Iam not familiar with WD java , the property force portal style sheet in WD java application should be enough to make WD accept portal theme.
Regards
Karthiheyan M

Portal theme not picked up in WDA from UWL workflow item

Hi all,
A workflow task has been configured to execute an WDA application that has the following Application parameters set:
WDLIGHTSPEED                 (blank)
WDTHEMEROOT     Theme ID in the MIME repository
However, when a work item is generated and executed for the above application, the theme is not being picked up and defaults to the portal theme. Note that when the WDA is executed either as a portal iView or directly from ECC, the correct theme is picked up.
I have tried setting WDFORCEEXTERNALSTYLESHEET but it has not made a difference.
The following visualisation parameters have been set
APPLICATION     zwda_myapp
NAMESPACE      SAP
SYSTEM_ALIAS     SAP_MSS
Any help is much appreciated.
Cheers,
John

Include the parameter sap-ep-themeroot in the DYNPARAM visualization parameter.
DYNPARAM    PARM1=PARM1_VALUE&sap-ep-themeroot=/SAP/PUBLIC/BC/UR/CustomerThemes/myTheme
I acknowledge SAP OSS for providing the solution.

Portal theme not applied to reports

Hi.
I've been creating a Portal theme for users with visual disabilities by customising various aspects of the standard high contrast theme available. The problem I am experiencing is that when I access a backend system report the display of that report in the main screen area does not use the customised theme which I have assigned to myself through the 'Personalize' link. The rest of the Portal display uses my customised theme, but the report uses a standard SAP theme.
I know it must be possible to change the theme which is used to display reports because when I change, for example, from the SAP Tradeshow theme to SAP Chrome I can see that the colour scheme for the report changes. However, I cannot make the report display use any of my custom themes.
Does anybody know how I can force the report display to use my custom theme?

In the transaction iview properties you can set the portal theme. Please verify it is correct.
Do you see the standard portal theme instead? Or is it the reference to the old server?

Intermittent issue : Portal theme not loaded for WDA, BSP iViews

Hello,
We are facing intermittent issue in Portals where theme is not loaded for WD ABAP & BSP iViews.
As theme isn't loaded, the layout of these iViews is distorted, it renders in plain HTML format.
And this is random behaviour and often not reproducible.
During one such occurrence, we could manage to capture "ERROR_INTERNET_CONNECTION_RESET" error when theme URL (a CSS file) is called.
Attached is the screenshot from HttpWatch.
Please suggest.
Thanks & Regards,
Amey Mogare

Hi Amey,
Try checking these SAP Notes:
1517914 - Themes & Styles - Specific Component Note
1818426 - WDA: Portal style sheet is not used
1000889 - CSS Style Sheet Integration of Web Dynpro and the Portal
Best regards,
Cristiano L. Mazzotti

How can I send an email to multiple contacts at once and have them not able to see the list or emails of the other persons included on the email?

Im trying to send one email to a list of people from my contact list but don't want them to be able to see who all is on the email list.

You use BCC instead of TO when addressing the message.
BCC = Blind Carbon Copy
The easiest way to do this is using the Contact Sidebar in the Write window. Press F9 to turn it on when a Write window is open.
Select all the contacts for the message. Hold the control key while clicking the contacts to select multiples. Then use the Add to BCC button at the bottom.

I'm not able to replace a graphic

I know very little about InDesign, but this should be a super simple thing to do. I have an indesign file given to me that I need to simply replace the current graphic (logo, pdf file) with another. I want the new graphic to take up the same amount of space as the old one. It won't let me "replace selected item" and I can't simply drag it into the frame that surrounds the original graphic. What can I do?!? I've been trying all sorts of things and looking for answers, but nothing has worked!

It would be about a million times easier to help you if we could see the logo on the page and the links panel when you've selected whatever it is you are able to select that contains the logo. Right now it sounds to me like whatever it is is pasted.
Please post a screen capture showing that area of the page, with the logo "selected" and the Links panel visible. Use the camera icon on the web page to embed it in your post like this:

Not able to replace new query in old workbook

Hi All,
I am having a workbook on a query which was developed long back,due to few changes i created new query and now i want to replace that query in old workbook which it is not allowing also tried to create new workbook with new query but when i run workbook it shows no applicable data found ,when i run query the data is coming.
I need all your suggestion on this
Regards
Deva

Hi Dev,
Open your Workbook and Go to the Sheet in which the desired query (to be removed) is embedded.
In the "BEx Toolbar" 3rd Last Icon if you place cursor on it it will say "Tools" > Click on Tools and you will see an Option "Remove Query" or if you want to remove All queries from Work book there is another option Tools> All Queries in Workbook --> Detach.
This will remove the Query from Workbook.
Then in same Tools--> you can see Insert Query click on it and point (select) your new Query.
This will insert the new query in Workbook.
Save the Workbook.
Hope this will resolve your issue.
Do post back if you face any probs.
Thanks
CK

Not able to replace & special character in WCF service XML response

Hi,
I am trying to replace a string which is & with "&". In the XML response, I m getting &amp;
I tried with "&amp;" also, but still not working.
Any suggestions will be helpful. thanks
Regards,
Harish
Harish

See webpage below. The & needs to be replace with U+0026.
http://en.wikipedia.org/wiki/List_of_XML_and_HTML_character_entity_references
jdweng

[SOLVED]Midnight commander, Color theme not able to load with root

Hi all ,
I have moved another step to this whole Arch Linux society, therefore am a newbie.
I have installed MC(midgnight commander) I got the ini file configured for the color theming
to deafault supposed everthing should be transparent except for the text offcourse .
Everything work fine but ...... when I do super user to run MC "sudo mc" It's doesn't
seems to take afect with the setting within the INI. Another word the ini only configured for user not root.
I have tried chmod +x ini and chown for root. Doesn't help.
Please advise
Your help would be greatly appreciated.
Thank You
Last edited by alpha.arch (2011-08-19 01:14:14)

You're welcome :-)
Config files are usually placed in the user's home directory, e.g. /home/karol for me and /root for root. The global configuration (affecting both regular users and root) is in /etc.
Please remember to mark the thread as solved.

Not able to select coloums in BAM View Portal

Hello All,
I have configure BAM, created activity and view in BAM.
I am able to see the view on BAM Portal but not able to select the column from it, please help me on this....
Thanks,
Nitin...
Thanks and Regards, Nitin.

Hello All,
Got solution for this...issue turn around that I was opening BAM portal in "Capability View" mode.
I unchecked this option (Check box) in browser and it's working fine now.
Tools -> Compatibility View Settings -> This will open new window for "Compatibility View Settings" Window. Uncheck check box for
[X] Display intranet sites in Compatibility View.
And this solved my issue.
Thanks and Regards, Nitin.

How to set Portal Theme for WDA iView different from user's Theme

Hi Experts!
I have dual-stack system: ABAP server + Java. I have WDA application in ABAP server and I deployed it to NW Portal via iView (using template).
There are two themes customized:
1: Standard - to be used for all iviews except WDA iviews. This theme is set as default for user.
2.: WDA theme - to be used for some WDA iviews IRRESPECTIVELY what them is set in personalization settings of the user.
So my question is:
Can I somehow set the Portal Theme to be used for specific iView no matter what Theme user has selected in his personalization?
Or if its not possible, can I set some specific Theme for WDA application?
So taks is to overcome settings for default portal theme for user and replace it with different theme. Is this possible?
Thanks in advance.

Are you using an LDAP as your UME, or are the user records from from R/3 ?
Apparently (Ive never done it) you used to be able to force a default language by editing this file (back in the EP5 days):
<J2EE root>\WEB-INF\portal\system\properties\prtDefault.properties
Look at the following lines :
This is the default language to be used when none is specified
request.defaultlanguage=en
request.defaultcountry=us
If you prefer to have the same language for all users no matter their user locale, change the lines to this :
This is the default language to be used when none is specified
request.mandatorylanguage=en
request.mandatorycountry=us
I hope this works out for you

Lenovo service is not able to repair a X240 for 6 weeks now

For meanwhile 6 (!) weeks lenovo is not able to repair my X240. I never thought, that it would be so difficult to repair one of lenovos highend laptops with 3 years service and extended warrenty
I have to mention, that this ist my 2nd X240. The first one was replaced by lenovo, because it was so bad build, that the local lenovo service denied to open the laptop.
The new one (4 months old) had until now two new displays, three mainboards and a new SDD.
About the 10th of december i opened a service request at IBM ESC, because the laptop didn't boot and the new display (the one before died) showed such an extreme ghosting, that one could read on the lock-screen, what was on the screen, before i locked the screen. Second problem: the laptop didn't wake up from standby.
Got a ticket number, but the service needed weeks to get the needed parts.
In janaury 2015 the service showed up. Meanwhile the laptop booted again. They replaced the display and mainboard. The technician repaced the mainboard to be "sure" that this will not happen again. Result: the laptop didn't boot. His opinion: either the SDD or Mainboard or SSD cable is the reason. He did not use my "old" mainboard, instead he left and said they will contact me again. After he left i saw that he did not assemble the body of the laptop correct wtih the result, that above the rear battery the body was open and bent. And it happend.. nothing! They closed the ticket!!!
A week later the mailroom called and told me that ibm send a parcel. A new SSD! But.. no technician! So i called lenovo again. They told me to open the Laptop and replace the SSD. I refused that. The new X240 is not so easy to open. I told them too, that the SSD cable could be also the reason for the problem.
After DAYS (!) they send me a technician with a new mainboard and he repalced the SSD (which i had to send back to lenovo!). Again no success and he had no SSD cable.
I showed him the body of the laptop and he told me that this is not covered by the warenty. Pardon??? This was not my fault!
Lenovo didn't show up again until i called them. And again a new technician with a new mainboard and without an SSD cable showed up! And what happened? Right! Nothing! The new mainboard did not fix the problem! Surprise.
I called again the support. Told them, that i could not be so difficult to get an SSD cable and a technician.But.. they suggested to send the laptop back to lenovo to repair it. I told him that for 6 weeks the laptop is not working now and that i need that laptop fixed! I don't want to send it in and wait again weeks for the return. The extended warrenty says, that they will repair my laptop on my desk! He told me that he will solve my problem... And what did i get? Yeees, a sticker for a parcel and instructions how to contact UPS.
Sorry lenovo, that is the worst performance ever. 6 Weeks and lenovo is not able to replace a SSD cable and to get the laptop in the shape (closed body) that it was before 3 technicians ruined it.
So lenovo, sry, no carbon 2015 for me. I have to look for an other brand after a bunch of Thinkpads.

Thanks again - Alas, I've been there. Deleted Search a dozen times, at least, and tried installing it, initially using a PowerShell script (tried several scripts actually, from full-blown total Search Applications with extensive topologies to the most basic
of basics 'please just start without showing me errors'), PowerShell line-by-line to see where things went South, next tried installing through Central Admin (hoping that it was my own stupidity in overlooking things and hoping The System would get it right
for me), and eventually even tried using the config wizzard as a total and utter last resort - Nothing worked.
At first, I found out that removing a Service App needs a *little* bit more work than simply removing it through Central Admin, but by now I can truthfully state that if there's one thing I've become supergood at, it's removing Search Service Applications.Totally.
I will check out the article, though - I realized early on in my SharePoint experience that regardless of what you think you know, there's so much more to find out. I know, that's almost philosophical. That is, my friends, indeed the point I've reached...

Issue in iSupplier : Supplier is not able to find PO's for a particular led

Hello Friends,
I have got one issue in which supplier (having access to isupplier portal) is not able to search PO for one particular ledger.
What are the things i can check for to debug the issue. Please suggest some approach.
Instance : 11i
Resp : Custom isupplier resp
Thanks a lot !
Regards,
Amit

Thanks S.P. Dash for the reply.
I checked and found that profile option is not set for this responsiblity but per user supplier is able to search PO for the ledgers which point to different SOB's.
I checked MO:Operating Unit also and it is not set too.
Is access security governed differently in isupplier module..I have read that there is a role of securing attributes also in isupplier responsibility.
Any other approach?
Thanks ....
Amit

Portal Theme - not able to replace horizontal divider

Similar Messages

Maybe you are looking for