POS and POSDM

Hi - what is the difference between POS and POSDM ? There are POS datasources such as 2LIS_40_REVAL etc for POS and then there are 0RT_PA_TRAN_CONTROL for POSDM ? In what ways these are related and how ?
Thanks a lot.

Hi anu
POS datasources are the older version datasources. such as 2lis_44_posrec and one more i dont remember. But 2lis_40_reval is LO' cockpit datasource.
In BI 7.0, POSDM is incorporated with the statndard datasources to which the data is fed by some interface like XI or websphere or biztalk and so on. And these datasources 0RT_PA_TRAN_CONTROL will populate the data into rsa7 of bi and then load to BI cubes.
Regards
Srikanth

Similar Messages

  • POS XI POSDM integration

    Hi Experts,
                         I am into POS XI POSDM integration . My queries are,
       1. Is there any specific forum in XI where I can get in touch with those, who have undertaken the following type of integtarion.
        2. My scenerio is File 2 XI to RFC adapter. I am getting an error in SXMB_MONI as " Root Cause: javax.xml.transform.TransformerException: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 4d, 20, 30(:main:, row:1, col:3) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:255)................".
    I believe taht the file I am sending is not matching with the mapping . Pls comment, pls tell me if u need any further info.
    You can see the word doc with settings , if u want, pls tell me if u r also experienced in POS - XI - POSDM integration inbound, 2 b more specific.
    Regards,
    Arnab.
    Hi experts, I was expecting some reply.
    And pls , no links to ECOVERSITY. I am already in touch with them.
    Edited by: Arnab Mondal on Feb 16, 2009 1:22 PM
    Edited by: Arnab Mondal on Feb 16, 2009 1:22 PM.
    Error during dry testing in Messege Mapping is "Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 4d, 20, a(:main:, row:2, col:0)".
    Showld I consider this as error in the load as its format is not matchin with the messege mapping SOurce Structure?
    Edited by: Arnab Mondal on Feb 16, 2009 1:38 PM

    Hi Hetal,
    Answer to ur queries.
    Can you just let me know that what is format of your file?
           The format of teh file is .DAT.
    You all can take a details look at teh file , as well as error taht I am gacing in the follwing url.
    http://sapknowhow.ecoservity.com/forum/topics/pos-xi-posdm-r3-integration?page=1&commentId=2328205%3AComment%3A2942&x=1#2328205Comment2942
    Reply by Arnab on February 12, 2009 at 7:21am .
    See the ID settings ZIP file.
    and have you used FCC in File adapter?
    Yes .
    If yes, what are your settings?
    ROOT.fieldSeparator                      ,
    ROOT.fieldContentFormatting      trim
    ROOT.endSeparator                   'nl'
    ROOT.missingLastfields             ADD
    ROOT.processFieldNames         fromConfiguration
    ignoreRecordsetName     TRUE.
    Pls tell me where am I going wrong.!

  • POS - XI POSDM - R/3 Implementation.

    Hi experts,
            Currently I am into the POS - XI POSDM - R/3 Implementation scenerio.I hav  doubts.
    Data frow from POS to XI to POSDM to R/3. . Similarly data from R/3 to XI - POS.
          I wish 2 know from the experts, wether they agree with the  use of Store Connnectivity2.0 in XI. In that case , I see there are around 30 standard mappings in that SCV Connnectivity .
        currently I am also  goin through a document called SAP Business Package for Store Connectivity
    POS Integration Configuration Guide. But I wish to know,,, that if i follow the SCV Store Connectivity 2.0, then I think I wont hav any option for Z development, as all 30 mappings in tehm are NON Editable....
       axctually I wish to speak more on it wid som expert who has alreadyy carried out the process.
    Is there any expert, who has any such experience exposure?
    Regards,
    Arnab.

    Michael / All ,
                          thanks for the reply. I just wanted to confirm my concept, wether or not at all it is possibe to edit standard components, like Store Connectivity, was just wondering, might there be such functionality.
    Actually  was lookin for som 1 who has worked in such a scenerio.
    I needed to know,, If a perticular standard mapping is satisfyin the business requirement, say the source and targets are fine, and the source fields and target fields are satisfyin the business, and I can see all necessary stuff like data types to intrface mapping all OK in the IR, then , if i wish to use this then , should i start with development of Business System/ service , Technical Service in the SLD nad then do necessary CUSTOM settings like communication channels, RD, ID, SA, RA settings in ID?
    I mean is my vision / thinkng OK??
    Pls comment.
    Pls , if my query is not clear, then revert back with ur doubt!
    Regards,
    Arnab.

  • Check for transaction interface failure from POS to POSDM

    Dear experts,
    Would like to see if in your experience, you have encountered any report or functions that allow users in POSDM to check if sales transaction from a particular store has failed to do the inbound interface from POS to POSDM?
    I am personally not aware of this, so if there is no such report based on your knowledge, would you have any workaround solution that you can suggest me?
    Thanks so much.
    Dominic

    Link for Duplication Check process: http://scn.sap.com/docs/DOC-47529
    Link for info on POS DM: http://help.sap.com/saphelp_posdm/helpdata/en/4e/9617be3aec6ea9e10000000a42189b/content.htm
    Hi Dominic,
    There are certain validation checks we have in POS DM to validate the transaction data when it comes to POS DM. These validations are like Master Data check, Duplication check, Sequence check for missing transactions and so on.
    You can find more about the same in the given link. I don't know my editor is behaving strangely so the link is on the top. I am not able to paste the links in editor links are coming on top. Might be my IE issue.
    Regarding implementing such validation in POSDM for incoming transaction you can refer my posted document for Duplication check in POSDM. From this document you will get an idea about how to implement the validation check.
    Let me know if you need any other information.
    Regards,
    Amit

  • How to find all open POs and there SUM

    How to find all open POs and there SUM
    Please help.
    Thanks,
    vihar9

    Have you tried looking at the tables, standard reports, or the PO display transaction?  Have you asked your functional analyst or development team lead? This is not a forum to post a requirement and get your job done for you...

  • Updation of POs and AP Invoices with new vendor ID

    Hi All,
    I need to update the POs and AP invoices with new vendor ID because of the merge program. Please let me know if there is any API to do that.
    Thanks

    Why do you want to that?
    i guess you have merged your suppliers and that does not have any effect on your customized reports? Am i right if Yes.
    Send me an Email on [email protected]
    i can help you with that
    Regards
    Attiq

  • How do i get iPhoto to time phase? (meaning take the same pic pose and show it over time)

    how do i get iPhoto to time phase? (meaning take the same pic pose and show it over time)

    I'm not sure that this is  something that iPhoto does. However, neither is it something I quite understand. What do you mean by "pic pose"?
    Regards
    TD

  • Point of sales (POS) and Product data management (PDM)

    Hi guys,
    please any one can tell me what is Point of sales (POS) and Product data management (PDM) in SD module and give me structures on this

    As i know it is not supported.
    Oracle supports counter sales order. But if performance is considered invoicing and receipt is slow in Oracle. So this can have workaround...

  • Total POs and total line items

    Hi experts,
    Iam trying to extract total number of POs and total number of line items for particular PO for a vendor.
    Do i need to make join for EKKO & EKPO?
    I want to get some thing like this
    Vendor   Total POs      Total line items
    1001       20                 50
    1002       30                 45
    Can any one give me the suggestion....
    Reward guaranteed,
    Thanks
    kaki

    Hi,
      I changed the code a little bit and modified my reply...Check the code..I tested it..it is working fine..
      Re-copy the code and check the results..
    TABLES: EKKO.
    SELECT-OPTIONS S_LIFNR FOR EKKO-LIFNR.
    DATA: BEGIN OF T_EKKO OCCURS 0,
    LIFNR TYPE LIFNR,
    EBELN TYPE EBELN,
    EBELP TYPE EBELP,
    END OF T_EKKO.
    DATA: BEGIN OF T_TOTAL OCCURS 0,
    LIFNR TYPE LIFNR,
    TOT_PO TYPE INT4,
    TOT_LIN TYPE INT4,
    END OF T_TOTAL.
    SELECT ALIFNR AEBELN B~EBELP
    FROM EKKO AS A INNER JOIN EKPO AS B
    ON AEBELN = BEBELN
    INTO TABLE T_EKKO
    WHERE A~LIFNR IN S_LIFNR.
    SORT T_EKKO BY LIFNR EBELN EBELP.
    DATA: S_EKKO LIKE T_EKKO,
    V_EBELN TYPE EBELN,
    V_PO TYPE INT4,
    V_LIN TYPE INT4.
    LOOP AT T_EKKO.
    S_EKKO = T_EKKO.
    IF V_EBELN <> T_EKKO-EBELN.
    V_PO = V_PO + 1.
    ENDIF.
    V_LIN = V_LIN + 1.
    AT END OF LIFNR.
    T_TOTAL-LIFNR = S_EKKO-LIFNR.
    T_TOTAL-TOT_PO = V_PO.
    T_TOTAL-TOT_LIN = V_LIN.
    APPEND T_TOTAL.
    CLEAR: V_PO, V_LIN.
    ENDAT.
    V_EBELN = S_EKKO-EBELN.
    ENDLOOP.
    LOOP AT T_TOTAL.
    WRITE: / T_TOTAL-LIFNR,
    T_TOTAL-TOT_PO,
    T_TOTAL-TOT_LIN.
    ENDLOOP.
    Thanks,
    naren

  • POs and Expenses Approval to be done through Blackberry

    Hi All,
    I am seeking advice on approving POs and Expenses approval through blackberry.
    Currently, we are using Oracle Purchasing and iExpenses alongwith other applications of Oracle E-Business Suite (version 11.5.10 on Solaris) and we want to make the system compliant with blackberry, so that people who are using blackberry would be able to approve expenses or POs using the same instead of logging into system using laptops.
    Kindly, advice me if this can be achieved using BPEL?
    Please let me know if you require any other information from me.
    Regards,
    Himanshu

    If it's a windows application, you pretty much need Windows. Barring having the source code for your application, your initial approach via bootcamp seem to be the cheapest quickest solution. It might be time to just buy a version of windows and set it up via bootcamp.
    I had a similar issue with a software, but luckily they had a version for linux. I was able to install Ubuntu on a partition, and get the software working. Perhaps your application has a linux version to can access?

  • Tcode for Open POs and Requisition Material type

    hi,
    Can anyone assist me with the Tcode for displaying Open POs and Open Requisition showing Material type field in the report or an alternative way to get it. Thanks.

    Hi,
    For Open POs
    Got to ME2N
    select scope of list as "BEST" and selection parameters as "We101"
    For Open PR change scope of list to "BANF"
    Get the materials for Open POs and pass them in table "MARA"
    select fields Material Type "MTART" and Material Group "MATKL"
    Execute to get the desired report
    Regards,
    Uzair
    Edited by: Mohd Uzair Hussain on Jan 13, 2010 8:33 PM

  • Migrating open POs and GR/IR clearing account balance

    Hello gurus,
    I've got the following problem concerning migration of open POs:
    For example: In my source system there is a PO for 10 pcs. of some material. There has been a goods receipt for 5 pcs. (200$ each).
    Now, when I import this order and the corresponding purchase order history into my target system (using LSMW), the target system creates the order, a material document for 5 pcs. and an account document.
    But of course, our FI-team also has to migrate the balance of the 'old' GR/IR clearing account.
    So, the balance in the source system is <> 0 (e.g. 1000$), because the 5 pcs. have been delivered but there has been no invoice receipt yet.
    This balance is imported into the new system and then the open orders are migrated, generating an account document and thus, the balance is 2000$ afterwards.
    This obviously is not correct, so I am sure that I am missing something, just what?
    Thanks
    Alicia

    Hi,
    1. There will be an open PO uploaded for 5 qty and price 200$ each
    2. Opening Balance of Material - 5 qty and corresponding value to Stock A/c - 1000$
    3. Also there will be Vendor Balances uploaded in the system as 1000$ against the invoice. (If the invoice is still expected then chec with FI Users if they can get invoice form vendor)
    if no then do not upload initial stock entry of step2, create a PO of 10 qty and then do GR in system (SAP).

  • What are the precautions to be taken while archiving the POs' and Material

    Hi All,
    I want to archive the Purchase orders and Material documents. Is there any standard rule to follow this procedure. What are the further consequences for the consecutive documents. And how do you check the open POs' of all.
                                 I have archived PRs' and Invoices, but these are not interlinked.
    Could you please help me in this, so that I will be very much thankful to you.
    Regards,
    Ram

    Dear Ramesh,
    Go to Tcode ARCHGUIDE --> Application Specific analyses and setting --> MM -->MM_EKKO and MM_MABTEL
    You can tick on the documentation and link to SAP help for all the guide and need for this archiving.
    Regards,
    w1n

  • POS and inventory management suggestions?

    I own and operate a gift shop and wanted to use my iPad, iPhone, and MacBook Pro to ease the burden of inventory management.  Any suggestions for a POS system that would help manage what comes in and out of the shop?

    Check out NCR Silver.  App based POS with back office that tracks inventory levels in real-time.  Have visibility to quantity on hand, know how many days of supply are remaining based on past sales history. 
    I may receive some form of compensation, financial or otherwise, from my recommendation or link. 
    <Edited by Host>

  • How to find all Open POs and PO status

    Hi,
    1. If I open any PO (we are on ECC6.0), on the PO header status Tab, we can see the status as "Fully Invoiced or Partially Invoiced or Not Invoiced" and similarly for delivery too. Is there any table to see get these statuses directly for any given PO?If no, How do I determine the status manually in the report ?
    2. If you get into a PO, follow the menu path Environment-->AC Commitments docs. Choose Funds Management from the Pop-up. This shall generate a report for the document Jounal entries and display the final amounts (final bdgt) there. Is there any table where I can get this amounts for a given PO?
    I want to generate a report for all the Open POs based on the different statuses from point 1 and also where its AC Commitments-FM docs amount is not equal to 0.
    I checked with my MM consultant for this and he couldnt be of help.
    Thanks
    Kiran

    >
    kiran dasari wrote:
    > But how can I figure out from EKBE or PO history?
    >
    > Do I need to compare the quantities from PO & invoices? If yes, what is the case, if there are multiple accounts for a same line item?...will calculation not be very tedious?
    >
    > Is there any direct shot I can hit to get the status for a given PO and given line item which says....Full Invoiced or Partially Invoiced or Not invoiced and similarly where do I go for delivery statuses?
    >
    > Thanks
    > Kiran
    Yes - it is tedious, but that is what we are paid for. You have to look at each line in the PO history table (EKBE), add up the invoices, subtract the returns. There are also some flags mentioned by other posters to determine whether the PO (or PO item) is complete.
    Rob

Maybe you are looking for