Possible to bypass multiple inserts?

Is there a way to bypass all of the inserts in the track mixer for all channels at once, without having to option-click on each insert?
When working on my PB, I'll find sounds, add the inserts, but the computer is too slow to play them all back with the inserts on. The ability to turn off all inserts while composing then turn them all on when testing a bounce, or a mix, would be great.
Any suggestions are appreciated.

Bump for a great idea.
I have UAD-1 Cards and you can turn them On or Off (all plugs at once) with the UAD-1 Meter. This could be handy from time to time with all LP plugs.

Similar Messages

CLR trigger - handling multiple inserts at the same time

Hi
I've developed a CLR trigger which operates on inserts performed on a staging table. The trigger implements some business logic and then inserts or updates a record in a target table. Whether an insert or update is performed depends on whether
a record with the same ID already exists in the target (i.e. a select * from target where ID = 123).
This works fine in most scenarios, but occasionally I am getting duplicates in the target table and have noticed that this seems to occur when inserts on the staging table happen at exactly the same time (i.e. multiple inserts for the same ID at
the same time). In this situation duplicates are created in the target table because at the time of the inserts, no record with that ID exists in the target table (i.e. the select returns no records), therefore a new record is created for each.
Is there a known way to deal with this scenario? For example, would locking the target table on insert result in the subsequent selects against the target table waiting until the target table had been updated, therefore the select would return a record
for the given ID.
I didn't really want to lock the whole target table on insert, because there are potentially other users reading that table (selects) and these would also have to wait for the insert to complete.
I'd appreciate any thoughts on how to deal with this and avoid duplicates in the target table. I'm unable to change the way the data is coming in to the staging table, so my trigger code must deal with the above scenario.
Thanks in advance.
John

First if you do not want any duplicate values in a column (or combination of columns) you should add a constraint to ensure this is never possible. A
unique index
like this should do this trick.
CREATE UNIQUE NONCLUSTERED INDEX [IX_yourIndexName] ON [dbo].[YourTableName]
[yourColumn1] ASC,
-- add more columns that make the unique combination that you don't want repeated
You can then add a try/catch block in your trigger code, if you get an exception based on this index then the record was created by another executing instance of this trigger and in that case you should do an update (or not, not sure what the rest of your
logic is) in your catch block. This is the easiest solution and does not involve table locks. The only drawback is the first one to commit the insert will win and you have no guarantee which process or data set that will be. Also i have no idea how big the
table is, how frequently changes are made, and what the data type is so you should
keep this in mind when creating your index so you don't run into unexpected high index fragmentation which can lead to performance problems when executing updates and inserts.
You could also create a
named transaction with scope serializable around your insert/update block and execute your reads using a
NOLOCK hint
which should allow them to retrieve uncommitted writes and not create a long wait. The downside is is that the data might not be 100% accurate depending on if a transaction fails or not if there happens to be an update at the same time as a select but maybe
this is not a big deal to the calling code.
-Igor

Multiple insert transaction for image uploads

Hello !
I can't figure it out how to connect multiple insert transactions on one page?
For example - I want to upload images from page with different categories(have menu list) and insert by the one button all the images at once.
image 1, cat 1
image 2, cat 2
image 3, cat 3
button to insert
Any Ideas? Where to start from?
Thanks, Nick.
Please help ! Maybe link for some tutorials?

Hi Nick,
What you are asking for is very possible to make with ADDT but if you are totally unfamiliar with ADDT you should probably go over the manual to go over the many functions that ADDT offers. You can find the manual two ways.
1. After you have created your site and created one blank page you can open the page to have the Developer Toolbox Tab un-greyed out. Then you can click on the last icon (Control Panel) and press the help button.
That will open up the manual.
2. Go to: http://help.adobe.com/en_US/Dreamweaver/10.0_ADDT/help.html?content=MXK3_052000_MX_K3_con trol_panel.htm
Same place the help button takes you.
Yes, Waleed is having hosting issues that I think he is sorting out.

Is it possible to have multiple locations in the Google Maps widget?

Hey folks,
Lets say you're designing a website for a client with multiple stores, you just want to point them all out, right?
Just want to know if it is possible to have multiple locations in the Google Maps widget. I guess it shouldn't be that difficult, but I can't figure it out..
any help would be highly appreciated!
thanks,
Thom

It seems that you can only use one address for this widget.
For this to work you will need to create the map in Google Maps with all your points and then copy the embed .html from Google into Muse.
Example of an embed google map with multiple points imported into Muse:
(Object/Insert HTML)

Is it possible to have Multiple Spool requests in one batch job overview?

Hi,
While running one of my z program in back ground, there are two spools generated (one by write statement and one by OPEN_FORM statement and both the spools are available in SP01 Transaction), but when i see the job overview in transaction SM37, I only see one spool request (that of the last spool request). Can any body in the group please tell me is it possible to see multiple spool requests in the job overview of one Abap program and if yes, how?
Thank you.
Abinash

Hi Jayanthi,
Thank you for the link. But probably that discussion was also an unsolved one.
Anyway, does any one in the group think that display of multiple spools per one step job is dependent on client / SAP Server setting? Because as evident from the chain of mails in the link provided by Jayanthi, some people say that they see multiple spool requests for one program in batch mode job overview (SM37)? If yes, can some body tell me the required configuration?

Is it possible to have multiple bookmarks files or tabs with different content, like Bookmarks 1, Bookmarks 2 etc. inside the same profile?

I guess this is more like a new feature in Firefox. I work at home and would like to separate work related bookmarks in a separate bookmarks file which is as easily available like a standard bookmarks tab. I propose a possibility to add multiple bookmarks tabs in the menu bar. It would be nice if those tabs could be renamed at will...

You can organize them in a few main folders (Home, Work, etc.) to make it easier to distinguish the bookmarks.
You can also export the Bookmarks to an HTML file and make copies of that file with the needed bookmarks.<br />
You can open such a HTML file in a Firefox tab and middle-click a link to open that link in a new tab.

Is it possible to disable multiple logins?

Is it possible to disable multiple logins by the same user on different computers? I have network hosted user accounts. I need a way to NOT make it possible for user A to go to client Mac A, login and leave himself logged in there then go to client Mac B and login there also. This is creating some unpleasant effects on the server - naturally!
Any easy way to accomplish this? Perhaps through Profile Manager?
Thanks!

Simon,
Thanks for the reply but I need some elaboration.... "the "Login" preferences for users and groups".... what exactly are we referring to? I don't see such option (or atleast the way it's written), in either Server app or Profile Manager. Are we talking about the same OS X version?
Thanks.
P.S. Despite the fact that I have enabled the option in Profile Manager to logout all users on all computers after 30 minutes of inactivity, I have noticed that the iMac clients don't log out the users after the said time...

Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is it possible to maintain multiple pymt frmts with in a single prgm 11i

Hi,
Is it possible to maintain multiple payment formats with in a single program in 11i
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is there a way to bypass all inserts on a track at once?

When recording with a ton of inserts, the latency is in the vicinity of about .5 seconds - so is there a way to bypass all inserts on a channel at one?
So far, I have to open each one and hit "bypass" but I do it so much, since I need to hear it after the inserts, it ends up taking a lot of time.
I also tried to save the channel setting, reset the channel, then re-insert the channel, but then all automation is lost....

Not as far as I know, but there are two things that might help.
1) You don't need to open a plug-in to bypass it - just option-click on its insert slot.
2) Check out low latency mode. (prefs -> audio -> general) which will bypass plug-ins which exceed your latency preference. Click it off when you're done.

Is it possible to combine multiple Pur Reqs for multiple materials to one vendor into one PO through MD07?

We have material planners who use MD07 (traffic signal screen) Stock/Requirements List, Collective Access tab to review material requirements by MRP Controller. Once the list is created, they select individual materials and review them in MD04. In a lot of cases, Purchase Reqs (PRs) are reviewed and adopted into POs individually for each material. Sometimes they will combine multiple PRs for one material into one PO. This is a good practice. However, from what I have found, it is not possible to combine multiple PRs for multiple materials into one PO. If this was done it would dramatically reduce the number of POs that we are issuing to suppliers. Problem statement: We issue too many POs which causes additional influxes down the line (receiving dock/goods receipts processing, receiving issues, invoices, invoice issues, etc.). Does anyone know of a way to address this problem without a major overhaul in approach or customization of the system? Thank you in advance!

Hello Michael
As far as I know, this is not possible directly from MD07, only from the MM transactions.
The following thread suggests the following procedure to convert several PRs into one PO:
Conversion of multiple PR into single P.O
Drag and drop the first PR from the item overview to the shopping card on top of ME21N,
then open the PO detail delivery schedule tab and drag and drop all other PR to the shopping card shown in the schedule tab
You can use the same procedure, calling the order conversion from MD07 and then drag and drop another PRs into this PO.
BR
Caetano

CHaRM-Is that possible to create multiple Transport Request in UC

HI Gurus,
Quick question on ur.gent correction using Solution Manager CHaRM in EHP1. Is it possible to create multiple transport request(TR) for single ur.gent correction (UC). DO NOT confuse with transport task.
For example, after I created transport request and developer start working and release the task, realised to add another transport request for same UC. When I tried, it did not create any TR but checked the message found that
Schedule Manager: Monitor
Job Status: Processing completed, but with warnings
Program Name: /TMWFLOW/SCMA_TRORDER_CREATE
Action to be checked: Ur.gent Correction: Create Transport Request
There is already an open request, XXXXXXXXXX, for this project
So only way I can do that I released the TR and able to create another TR.
May be wondering why I need to create another TR, why not create TASK and work on that.
But this is the requirement at our company.
I will appreciate the effort and time to provide me the solution of this.
Thanks
Ava

Hi Ragu,
That's really quick turn around. Unfortunately not able to found whatever you mentioned in your message. Here is detail,
I navigate to Actions - Depending on Status, found the entry as
Trans. Type     StatProf         UserStatus     Seq     Action in SAP Change Manager
SDHF             SDHFHEAD   E0002            10       CREATE_HF
SDHF             SDHFHEAD   E0002            20       CREATE_REQ
SDHF             SDHFHEAD   E0002            30       SAVE_PARTNER
SDHF             SDHFHEAD   E0002            40       SET BO LINKS
Where SDHF - Ur.gent Correction
           E0002 - In Development
           CREATE_HF -        Create an Instance in SAP Change Manager
           CREATE_REQ -     Create Transport Request with Task
           SAVE_PARTNER - Save Partners in Respective Partner Roles
           SET BO LINKS -     Sets Links to Business Objects
I don't see any OPEN_TR.
Any other place need to make change.
Thanks
Ava

Is It Possible to create multiple tab report in OBIEE 11g?

Is It Possible to create multiple tab report in OBIEE 11g?

Triple post even! Multiple tabs in a single OBIEE & https://forums.oracle.com/thread/2560266
Stick to one post!

Possible to have multiple cluster members in the same JVM (for unit tests)?

Hi,
I'm wondering if it's possible to simulate multiple cluster members inside of a single JVM. I'm looking to unit test my code and it would be great to write cases for various boundary conditions.
This could certainly be done with multiple JVMs but would be more difficult to run in something like cruise control etc.
TIA,
Danny

Hi Danny,
I do not know how to accomplish what you are asking for and run several Coherence nodes in a single JVM, but I have written a JUnit base class that starts a configurable number of nodes (each in its own JVM) and provides some other useful methods for unit/integration testing with Coherence, such as method to clear all caches or to load test data from the CSV file.
It is still a work in progress and you might need to tweak things a bit to make it work in your environment, but it will at least give you a head start.
Shoot me an email if you are interested and I'll send it to you (you can find my email in my profile).
Regards,
Aleks

Is it possible to connect multiple R/3 systems to one APO system?

Hi,
Is it possible to connect multiple R/3 systems to one APO system?
Kind regards,
Kris De Smedt.

Hi Kris,
Yes, you can connect multiple R/3 systems to one APO system. All you need to do is to maintain connection parameters of all the R/3 systems with APO. (i.e. RFC Destinations, logical systems, partner profiles etc.)
Regards,
Naveen.

Possible to bypass multiple inserts?

Similar Messages

Maybe you are looking for