Possible values for the variable string in "keysym. sym : string "
The resource keysym for customizing the urxvt terminal has the syntax:
keysym.<sym>:<string>
As explained in the urxvt man page, <string> can contain "escape values". Even though there are different examples of values for the variable <string> on the web, I was wondering if there is a place where I can find a comprehensive list of possible values for this variable.
(I tried to look for this information at the X man page -- as indicated in the urxvt man page -- but I couldn't figure it out. I wonder if my difficulty is due to the fact that I'm not sure what the expression "escape values" refers to...).
Thanks!!
pointone wrote:Maybe this will be helpful?
Thanks a lot pointone for the link! I found many interesting things at this link. But I'm still not sure if I understand what the possible values of the variable <string> are.
From what I understand, the website you sent shows how to map a keycode to a keysym using the xmodmap utility. However, it seems to me that the use of the rule
URxvt.keysym.<sym>: <string>
in the .Xdefaults maps a keysym to an action, given by the value of the variable <string>.
Does this make any sense or am I missing something here?
Similar Messages
-
What are the possible values for the JOB status?
What are the possible values for the JOB status in the table TBTCP and significance for each?
Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond -
Maintain values for the variables in using Transaction SM30_SSM_VAR
Greetings
Im trying to start a customizing transaction of SRM from Transaction Solar02 in the Solution manager, and this message appears:
Maintain values for the variables in <> using Transaction SM30_SSM_VAR
I start the transaction SM30_SSM_VAR but there are no values maintained. I don't know which values have to be set.
Please if anybody could help me, I will be much appreciated
Regards
Henry
appreciated.
Regards
HenryHi Henry,
you probably clicked an URL that has some <value> brackets inside? In this case you need to create a variable in SM30_SSM_VAR with the name "value" and maintain as attribute the e.g. the SRM-server you want to be replaced in the URL.
Regards
Andreas -
Rectrict list of possible values for variable in Bex
Hello folks!
I need to give a user possibility to choose only few value for variable in Bex report. Number of entries in master data is huge. I need to show only 7 possible values in the window with variables.Amy,
You have a tricky requirement but I can only think of one thing but it would require user training. Try the following.
You can setup a new variable with default values and define it as type multiple single values.
The user could in the variable screen would then need to take out the ones that are not needed.
Hope this helps.
-Sid -
Can we set a default value for the container variable in BPM?
Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1 -
How can i implement the default value for this variable?
In one of our Stored procs,we have a variable RECS_TO_DELETE, which determines the number of records to delete from various DELETEs that happen within this proc.
The value for RECS_TO_DELETE variable should be obtained from a configuration table sys_config
select
rec_num into RECS_TO_DELETE
from sys_config
where
sys_code=55;
But if something goes wrong with sys_config table or the above SELECT INTO, our client wants to makes sure that RECS_TO_DELETE should have a default value of 1000.
In the code, how will i implement having this default value of 1000 for RECS_TO_DELETE variable in case the above SELECT INTO fails for some reason.Hi,
You have to assign a value before the execution...
DECLARE
RECS_TO_DELETE NUMBER(9) := 1000;
BEGIN
SELECT rec_num
INTO RECS_TO_DELETE
FROM sys_config
WHERE sys_code = 55;
DBMS_OUTPUT.put_line(RECS_TO_DELETE);
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.put_line(RECS_TO_DELETE);
END;
/Regards, -
What are the possible values for a check box?
I'm trying to fill a pdf with a asp.net web form. I'm getting the text boxes filled ok, but I'm having trouble setting the check boxes. I am testing to see if a web form check box is checked. if it is, I tried to set the pdf checkbox value to "on". But this doesn't seem to be right.
My asp.net code is like:
If CheckBox1.Checked Then
af.SetField("pdfbox1", "On")
End If
Any suggestions?
ThanksThe value is the value entered into the "Export Value" option when the form is created. You can use the Acrobat JavaScript "exportValues" property to get the array of values for the same named check boxes. And if you know the 'widget' of the check box, you can use 'isBoxChecked' method to check if a given 'widget' is checked. More information is contained in the Acrobat JavaScript doucmentation.
-
How to use one variable as a default value for another variable?
Hi Experts,
Is it possible to use one variable as a default value for another variable?
For example:
Variable 1 = current calendar year month
Variable 2 = mandatory input ready variable for calendar year month
I want to use variable 1 as default value for variable 2, but also have the ability to change the month if required.
Thanks!
Kathrynu can use replacement path variable
in that case u can replace the values of 1 variable with the another variable...
but u cannot do this setting
u cannot make variable 2 as mandatory
u cannot enter value for variable 2
because by default it will take the value of variable 1
u have to make follow settings
variable 2
name , technical name
processing by = replacement path
infoobject = ocalmonth
next tab
replaced by another variable
variable name
offset start , offset lenght
save and hit okey -
Default multiple values for formula variable on variable selection screen
Hi All,
Suppose 'A' is formula variable with customer exit as processing type then i want four default values for this variable eg: 3, 6,9, and 12 as selection options, when we will execute query user can able to pick any one of the default value.
is it possible in BEx for formula variables?
I also tried with ABAP code in 'cmod' t-code, but it is not working properly for 4 default values....but for single default value, code is working fine.
I am using following code ::
When 'ZCSIMCTB'. // variable name
IF i_step = '1'.
CLEAR : l_s_range.
l_s_range-low = 3.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 6.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 9.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 12.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
Thanks in advanceHi Sankar,
Thanks for reply...
With single quotes also its not working.......
Also as I am using Formula Variable so by default "Single Value" is coming on Variable Details....
Regards,
NIlesh -
Using HttpHeader to set value for session variables
Hi,
We want to set values for 2 session variables (USER and ROLEID) using HttpHeader in obiee 11g. Has anyone tried this? How can we achieve this?
I found the below note on the forum for setting value for the USER session variable. how can we set the ROLEID session variable also? is it possible to set values for 2 variables?
for setting the USER session variable,
You should add this in $BI_HOME/bifoundation/web/display/authenticationschemas.xml:
<SchemaKeyVariable source="httpHeader" nameInSource="Proxy-Remote-User" forceValue="SSO"/>
<AuthenticationSchema name="SSO" displayName="Single Sign On" userID="IMPERSONATE" proxyUserID="NQ_SESSION.RUNAS" options="noLogoffUI noLogonUI">
<RequestVariable source="httpHeader" type="auth" nameInSource="Proxy-Remote-User" biVariableName="IMPERSONATE" options="required"/>
</AuthenticationSchema>
Please suggest.
Thanks.I think maybe your SnmpValue type or value is not corrent.
1.3.6.1.4.1.7064.201.1.200.100.0 is Enum control type
when I use
SnmpValue val = new SnmpString("0");
It doesn't work, but when I use
SnmpValue val = new SnmpInt(0);
It works. I think the JDMK should give some warning message when the type is not correct. :)
The code is following:
final SnmpVarBindList setList = new SnmpVarBindList(" set varbind list ");
SnmpOid oid = new SnmpOid("1.3.6.1.4.1.7064.201.1.200.100.0");
SnmpValue val = new SnmpInt(0);
SnmpVarBind valueBind = new SnmpVarBind(oid, val);
setList.addVarBind( valueBind );
SnmpRequest setRequest = session.snmpSetRequest(null, setList); -
How can I get null values for the later weeks
Hi All,
When I execute this code I get the records till current week.
How can I display the output so that I get null values for the later weeks. (with the help of v_numOfWeeks variable in the code)
Thanks,
Vikram
DECLARE
v_query VARCHAR2(4000);
TYPE ref_cursor IS REF CURSOR;
v_refcur ref_cursor;
v_sum NUMBER;
v_id NUMBER;
v_name VARCHAR2(1000);
v_weeknum NUMBER;
v_pernum NUMBER;
v_numOfWeeks NUMBER := 5;
BEGIN
v_query := ' SELECT SUM(product_bkg), postn_id, postn_tbl.postn_name, b.week_num, b.period_num
FROM ops_cv_extract b, (SELECT row_id, desc_text postn_name
FROM s_postn) postn_tbl
WHERE lvl_6_id = 5767
AND fiscal_year = 2008
AND b.week_num < 4
AND b.period_num = 3
AND b.postn_id = TO_NUMBER(postn_tbl.row_id)
GROUP BY postn_id, postn_tbl.postn_name, b.week_num, b.period_num
ORDER BY postn_tbl.postn_name, b.week_num';
OPEN v_refcur FOR v_query;
LOOP
FETCH v_refcur INTO v_sum, v_id, v_name, v_weeknum, v_pernum;
EXIT WHEN v_refcur%notfound;
dbms_output.put_line('P'|| v_pernum||'W'|| v_weeknum||' '||v_name||' '||v_sum);
END LOOP;
END;
This is the output when I execute this code.
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W2 COMM CNTRL TAM 216 12561.4
P3W3 COMM CNTRL TAM 216 2027.1
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
This is the output I'd like to get
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W4 COMM CNTRL ISAM 213
P3W5 COMM CNTRL ISAM 213
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W4 COMM CNTRL ISAM 273
P3W5 COMM CNTRL ISAM 273
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W4 COMM CNTRL TAM 213
P3W5 COMM CNTRL TAM 213
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W4 COMM CNTRL TAM 273
P3W5 COMM CNTRL TAM 273
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
P3W4 Damon Walters
P3W5 Damon Walters Edited by: polasa on Oct 28, 2008 6:42 PMSure, in a Single SQL ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>-- Start Of Test Data --
satyaki>with week_tab
2 as
3 (
4 select 1 period_num, 1 week_num, 10 bkg1 from dual
5 union all
6 select 1, 2, 40 from dual
7 union all
8 select 1, 3, 30 from dual
9 union all
10 select 1, 2, 20 from dual
11 union all
12 select 1, 1, 10 from dual
13 union all
14 select 1, 1, 20 from dual
15 union all
16 select 1, 3, 10 from dual
17 union all
18 select 2, 1, 15 from dual
19 union all
20 select 2, 2, 20 from dual
21 union all
22 select 2, 3, 10 from dual
23 union all
24 select 2, 1, 15 from dual
25 union all
26 select 2, 2, 30 from dual
27 union all
28 select 2, 3, 20 from dual
29 )
30 -- End Of Test Data --
31 select period_num,
32 week_num,
33 (
34 select sum(week_tab.bkg1)
35 from week_tab
36 where period_num = m.period_num
37 and week_num = m.week_num
38 group by week_num, period_num
39 ) sum_bkg1
40 from (
41 select dum.week_num,
42 wk.period_num
43 from (
44 select 1 week_num from dual
45 union all
46 select 2 from dual
47 union all
48 select 3 from dual
49 union all
50 select 4 from dual
51 union all
52 select 5 from dual
53 ) dum ,
54 (
55 select distinct period_num
56 from week_tab
57 ) wk
58 ) m;
PERIOD_NUM WEEK_NUM SUM_BKG1
1 1 40
1 2 60
1 3 40
1 4
1 5
2 1 30
2 2 50
2 3 30
2 4
2 5
10 rows selected.
Elapsed: 00:00:00.48
satyaki>Regards.
Satyaki De. -
I want better solution for adjusting the Material stock values for the last
my Customer need to adjust( Decrease) the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
Material1 : RS: 4149599 QTY : 10181.03 Ltrs
Material 2 : RS: 1318596 QTY: 2152.76 Ltrs
As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
Step 1 : post FI Journal Entry on 31.03.2006
Opening Balance G/L Account Dr 4149599 + 1318596
Closting Stock a/c Cr 4149599 + 1318596
Step 2.
Change the Material Price in MM through T.Code: MR21
( Posting will be allowed in current or previous months)
This makes our CO reports accurate.
Please suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
WIth Best Regards,
Rajesh
<b></b>Hi Madhavan,
Unfortunately this forum deals with migrations from non-Oracle
environments to Oracle. You seem to be dealing with migrations in
an Oracle environment mainly.
I would recommend that you contact Oracle Applications and RDBMS
support directly. They will have the most up to date
information/advice on performing these actions.
Regards
John
Madhavan (guest) wrote:
: Hi John
: Thanks for your reply.
: Actually I am planning to upgrade the system.
: 1. I Want to Upgrade Oracle Financials release 10.7 to the
: latest version (11.x)
: 2. Oracle 7 database to oracle 8 or 8i.
: 3. Oracle is running on NT service pack 3. Do I need to upgrade
: this?. If not what is the impact on Windows NT?
: 4. Is the majority still running smart client 10.7 and database
: 7?
: 5. What is the necessary time to implement these upgrades? What
: type of consulting I need to have?
: 6. I have some employees working on it? Will these changes
: affect them?
: What type of precautions I need to take on the whole??
: Thank You
: Madhavan
Oracle Technology Network
http://technet.oracle.com
null -
Default values for the controlling area and language
Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant GokhaleHello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks. -
Set a value for a variable of type exit
Hello,
I am filling some variables with multiple values in user exit.
Now, i would like to place some of these characteritics in Header area. It's of course impossible because there is multiple values but ...
I will put dropdown box in the web application for these chars. The problem is that by default, any value is assigned to the dropdwom ( any variable value is set).
Do you know how i can set a value for theses variable after filling all values by the user exit. SO that only one value is selected for the header and all others values available in the dropdown ?
Regards,
JarodHi,
Off late, this seems to be a usual requirement.
Just create a Z program to call the FM API_SEMBPS_VARIABLE_SET and then call the FM API_SEMBPS_POST.
you should be preparing the content/set value to pass to the FMs. check the whereused list to see how this FMs can be used/called.
finally, run this program for your variable, after the loading/filling the exit variable. Please note that to set 'exit' variables, the sourcing variable's content need to be read/set first before setting the exit varible.
HTH,
Regards,
Nataraj. -
Multiple values for one variable?
I've created my first set of variables (using Form Properties>Variables), tweeked some XML sourcecode and they're working .
What I'm now trying to figure out is how to have one variable that has 2 values that pop up in 2 different text fields.
Simple form at this point:
Item, Model and Service Tag.
The user selects the item from the drop down list and the Service Tag field is autopopulated from the variables I set.
How do I get the Model to appear based on the Item selection?
I tried putting the two values for one variable together but both values appear in the same field.
Variable info that works: Scan (variable) = MC3090BT (value)
I also need this particular variable to = Handheld scanner (try to ignore the redundancy).
I attempted to make MC3090BT as it's own variable with Handheld scanner as it's value, and add to the code below but it didn't work.
Here's some of the code if it helps:
<event activity="change" name="event__change">
<script contentType="application/x-javascript">if(xfa.event.newText == "Handheld scanner"){
servicetag.rawValue = scan.value;
}else if(xfa.event.newText == "Latitude X1"){
servicetag.rawValue = X1.value;Hi, I am trying to do the same thing..passing multiple values to receiving query variable through RRI. Right now if I assign a query variable of type multiple single values it does not take any value. It works only if I assign variable of type Single Value.
In my assignment details the sender query has Generic for type and * for selection type.
If any one knows how to pass multiple values to receiving RRI query, please give the details.
Thanks
Maybe you are looking for
-
Bought a new 27" mac and did a data migration from the old mac. The creative cloud app will not install as it says its damaged, and prompts to download it. Every time i try to install it crashes and says cc is needed for this problem, and i go round
-
Error from dbms_random package
I have tried unsuccessfully to get the dbms_random package installed. This is my latest error message. Can anyone help me out? call dbms_random.initialize(12345) ERROR at line 1: ORA-04068: existing state of packages has been discarded ORA-04063: pac
-
Sql loader: loading external file into blob
hi, i keep being blocked by loading external binary files into a blob columns with sql loader tool. Here is the problem: I want to load pictures into a table with lob columns. Here is my control file, data file and the error message: control file: LO
-
Studio 1 Verses Studio 2?
I currently run FCP studio 1, ie with FCP 5, and have used it for quite sometime for broadcast productions. It works reliably and solidly. But render times are slow on powerPC chips especially as clients now want more for the same money. Foolishly ne
-
I was using the Show All Bookmarks and tidying up some of the older ones that I did not use anymore. Under the folder "Recently Bookmarked" were urls that I had saved under their appropriate folders. So, being tidy, I deleted them, thinking they were