Possible version 9 document save bug?

whenst opening SOME v9 docs i get the following error msg: There was a problem reading this document (9). is there a problem in v9 whenst saving? is there a problem on my side opening? it is reproducible with the afflicted docs, but nearly all pdfs do not generate such errors. i use a fully licensed copy of adobe acrobat to open; unsure what created the docs. dean

> Don't you understand the message: > "This document reader enables reader capabilities that are no > longer enabled in this Reader version." I'm sure I'm not the only one who can't make head or tail of that message, assuming it's properly transcribed. To me it says that this Reader version includes reader capabilities that are no longer enabled, but that 'this document reader' enables them. If 'this document reader' is something other than 'this Reader version', then what is it? If it isn't, then the message is nonsense. Capabilities can't be enabled - they are inherently able, otherwise they're not capabilities. Is 'capabilities' intended as a misguided synonym for 'functions', which can be enabled or disabled? <searches...> An earlier reference to a message like that omits the first 'reader', in which case the message probably means that this document includes functions which don't work in this Reader version. -- Noel

Similar Messages

Microsoft Word 2013 Documents open as full version documents on two computers sporadically

Hello,
We have a customer site with a perplexing problem that occurs very sporadically.
Our customer has a large word document called “Green Book” that tracks all customer jobs, new, pending and completed in a large tabled document that can sometimes span up to 300 pages. Yes we are aware we probably should convince the customer to run an Access
database but have not had the expertise in-house to date to date to do this but that is off the scope of this topic for now….
The problem that is driving our customer (and us) nuts is that user A will open Green book quite happily, user B will turn up to work some 3 hours later and get a full read / write version of the document. If user B opens up the document immediately or within
a few minutes of user A the document will predicably come up with a “this document is in use by user xx” and give the end user an option to open the document as read only which would be fine if only this would work that way every time. Having a second
user open Green book inadvertently as read / write creates pandemonium when two users have conflicting edits to the document as they both think they have the original.
Every time our techs have been onsite we’ve been unable actually reproduce the problem for ourselves mainly because we seldom get three spare hours to wait and the office is flat out during business hours with end users reluctant to spare their machines
at the best of times…
The problem extends only to this file, no connectivity problems to other files, email or internet surfing have ever been reported so can only assume the core network is solid.
In a nutshell here is a summary of our customer’s network configuration that was part of a network upgrade done at the beginning of May this year:
N.B. all hardware (BIOS / firmware), operating systems and software has all been patched up to the latest possible versions both on desktop and server level.
HP Proliant ML350 Gen8 Server – 48 GB RAM, 2 TB RAID 10 10K SAS drives on a smart Array P400i
HP server runs Microsoft HyperV 2012 R2 (latest updates applied) and runs two guest OS:
SBS 2011 Server (32 GB RAM) that acts as File Server (that originally shared Green Book) / Exchange server
Windows Server 2012 R2 – RDS / Terminal Server (12 GB RAM) (this server now shares Green book)
Trend Micro Worry Free Advanced Version 9.0 in use with real time scan disabled on servers but enabled on desktops.
New late model HP Procurve Gigabit switch installed.
Desktop Computers are HP EliteDesk 8300 Computers running Windows 8.1 Pro / Office 2013 Home and Business on 4 GB RAM.
In a nutshell here is a summary of the troubleshooting steps / workarounds all unsuccessfully attempted to date:
Ensured Green Book from is saved in latest DOCX format not legacy .DOC format
Turned off server auto-disconnect (done on server not workstations) after 15 minutes feature on Windows server to rule out disconnected sessions giving User B’s computer a false impression it is the only user with access to Green Book
http:// Support.microsoft. com/kb/297684
With above setting in effect I’ve instructed an end user to leave a document open for over an hour and do a
net files command on the SBS file server to confirm that user A still had a session lock on that file (which they did) to rule out a disconnect giving user B’s computer a false impression it had an exclusive access lock on the file.
Opportunistic locking on server has been disabled.
Setup a dedicated server with a connection limit of one user at a time to each of these “sensitive files”. Quickly abandoned this as it was more trouble than it was worth getting user to close Word to release file lock despite document being closed.
Moving Green book from SBS server to a shared folder on Windows 2012 R2 terminal server (no auto disconnect parameter set). Still has the same problem!
In desperation I’ve setup remote desktops for all affected users and put shortcuts on desktop a local C drive copy of Green book. Because it looks different to their desktop and Word is slow anyway users objected and I was forced to allow end users again
to open green book again from their individual servers.
What did the customer run before and what were the issues with Green Book?
Customer ran a Dell PowerEdge T300 Server with 8 GB of RAM and 600 GB mirrored SATA drives on SBS 2008 and Dell workstations running Windows XP SP3 / Office 2007.
Green Book was always slow because of Word being very slow with 300 + pages of tabled information.
No file sharing / locking issue as reported above was ever reported.
If anyone can share any experiences on this or shed any light on the problem we would be eternally grateful…

I quoted this from your cross-post, by MVP Paul Edstein.
"Your description suggests a network problem, with the
networking software losing track of the fact the file is already
open.
That said, you might find it useful to store documents intended for
shared editing in a OneDrive folder. This is designed to allow two or more
people can edit a word document concurrently.
Once you have OneDrive
operational, click OneDrive in the header of a SharePoint or Office 365 site,
then click the ellipsis (…) to the right of the entry. Then click ‘Share’ and
invite the other user to view or edit the document, and click ‘Share’ once more.
To add to the list of people already sharing a document, click the ‘Shared with’
icon in the ‘Sharing’ column and invite the additional person to view or edit
the document, and click ‘Share’ once more.
When someone invites you to
share a document, you’ll typically receive an email notification with a link to
the document. Clicking the link opens the document. If you have edit permission,
your changes are automatically saved.
For more info, see:
http://office.microsoft.com/en-us/sh...102772333.aspx "

How to use document saveAs to save a PDF to a UNC path

Can document saveAs tsave a PDF to a UNC path on a network share?

JavaScript is inherently in Unicode. I see no reason for it not to work, though in versions of Acrobat before the most recent, it could only save to files whose Unicode matched the system coding. So test that a manual save will work before trying to automate it.

AFTER I EDIT A PDF DOCUMENT, SAVE IT , I CANT RE-EDIT.

AFTER I EDIT A PDF DOCUMENT, SAVE IT , THEN TRY TO ENTER MORE INFORMATION ON THE SAME DOCUMENT, IT WON'T ALLOW FURTHER EDITING. WHY?

Hi bay eastwood,
What version of Acrobat are you using, and are you on Mac OS or Windows? What happens when you try to edit the file a second time? Do you get an error, does Acrobat not respond, or does it crash?
Please tell us a bit more about what's happening, and your system setup, and we'll do our best to get to the bottom of it.
Best,
Sara

Since the CC update Document.saveAs() always opens a dialog

Is anyone else seeing this?
Is there a work around?
This is a script I have been using for months to open Illustrator files in Phohoshop, resize them, and then save as PNG. The source images are dynamically generated and it is impractical to sit around waiting to click on the save dialog after every one. This is a new issue for a script I have been using for a long time.
Photoshop 14.2 x64
Extendscript Toolkit CC 4.0.0.1

What version of Photoshop are you using and are you experiencing the same issue with Document.saveAs()?

FURIOUS! Warning: Undo Bug and Auto-Save Bug

So I'm pretty ticked off right now. I generally liked FCPX and its changes contrary to many others' opinions, but I just came across a bug that ultimately was worse than I thought.
During my editing process, at some point I was unable to undo changes. It was greyed out in the toolbar, and Command+Z wasn't working. It was annoying, but I didn't think much of it or bother to restart FCPX because I was in the zone and didn't want to stop. Eventually, I decided to restart FCPX to see if I could fix the bug with a lull in my edits. It closed out as normal.
When I re-opened FCPX, I found out that my project was at an EARLIER state. From what I can guess, when the undo bug happened. So, during that period of time, NOTHING was being saved. Since you CANNOT auto-save (I know you can duplicate a project, but Im not interested in that, I just want to save a copy manually), there is no way I can recover my edits. I lost about an hour or so worth of edits. Since FCPX doesn't support "versions" yet either, there is no way I can retrieve it.
I do not know if this is a bug due to 10.7, nor do I really care. I sent a bug report because this needs to get fixed. I consider you do the same but AT THE VERY LEAST, be mindful of this bug. If you suddenly can't start undoing, either STOP IMMEDIATELY or duplicate your project (maybe that would work). I'd hate to have someone else go through this problem too.
Sorry if this message is written poorly, like I said, I'm pretty ****** that this key function (Apple's ONLY way to save) failed.

Thanks guys for the tips. Unfortunately though stuck, I don't know if the finder trick will work. Remember, I never really had the file LOST, the changes were simply not writing to the actual .fcp file. So if I copied it in Finder, I think it would just copy the .fcp file which is currently not getting saved to anyway. Maybe duplicating the project in FCPX would work, but again I think that just takes the .fcp file and duplicates it. If it's not writing to it, then its a moot point. Oh well.
As with anything that frustrates anyone, I've cooled off haha, and doing the re-edits actually seemed to turn out easier and better then second time (you know, as theu naturally are I suppose haha). Obviously all sorts of problems happen with technology, its just a shame that its a bug that revolves around the ONLY save feature haha.
HOWEVER. I think I have replicated the problem, and MIGHT know the source of it. Or at least one. If someone wants to try this and confirm this? I'm running OSX 10.7 and FCPX 10.0 (obviously), however I encourage someone with 10.6 to try it too.
I noticed the "undo bug" (and thus the auto-save bug) happens when I took one of the "fader handles" (I don't know the actual name, but its the little marker-like icon found at the start and end of audio tracks, which when dragged, let you easily make a fade in or out. If you take a fader-handle, an drag it ALL the way BEYOND the length of the clip, it should get stuck. Youll notice you cant easily make a change to it again, and you can't undo it. I think this is what causes the problem, as I think this happened twice to me.
If this is it, I hope I can find a way to flag this for Apple so it can get fixed! At the very least we can be concious of it.

Error opening previous version documents

Hello,
We are having the issue of open Sharepoint previous version documents. When we attempt to open the previous version documents we got an error "Sorry we coudn't open https://sharepoint.its.com/howto/_vit_history/2560/doc1.docx.
Our environment: Sharepoint 2013
Document library versioning turned on.
I am the site collection administrator, so I know its not the permission issue.
Thank you for your help.

Hi,
As I understand, you encountered the error when you opened the previous version documents in SharePoint 2013.
Can you open previous version of all the documents in the document library? Or does the issue occur on specific file types?
Can you open the previous version documents in other browser?
Check things below:
1. Check if select the “Do not save encrypted pages to disk” in Internet Options --> Advanced, you can deselect the option and to check if the same situation will occur.
2. You can go to Internet Options --> Advanced and click "Reset All Internet Explorer Settings", then to check if the same situation will occur.
3. Check the detail of the error in the ULS log.
4. You also can create a new document library with versioning enabled and upload some documents, then open the previous version of the documents to check if the same situation will occur.
The article below is about Internet Explorer Cannot Open Versions of Documents.
http://www.akspug.org/Blog/Post/86/Internet-Explorer-Cannot-Open-Versions-of-Documents
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Possible AMT8 midi driver bug.....

Possible AMT8 midi driver bug.....
Hi All,
I have a slave computer hooked up to my AMT8 ports 6 and 7
When I launch my project from Logic 7 it plays / triggers.....When I launch same project in Logic 8 it doesn't play / trigger...
OF NOTE: I also have 2 other slave computers that are hooked up to AMT8 ports 4 and 8.....those trigger just fine...
thoughts?
SvK

Steven von Kampen wrote:
Could some kind soul please confirm that Logic8 does not send midi to ports 6 and 7 .....
Hi Steven,
My setup is identical to iS's. Unitor8 with AMT8 daisychained.
I have port 6 I/O of the U8 going to a CM Motormix. Working great.
I have port 14 I/O (port 6 of the AMT8) going to my old G3 Soundiver-Kurzweil K2500 rig. Also working great.
Ports 7 and 15 at the moment aren't connected to anything, but I can test them later if you like. The LEDs for those ports are lighting when I send MIDI to them from L8 though.
Note that when I installed Logic 8, there's an option to install the Unitor8 family drivers. I checked that. (Just in case). Try running the installer again with everything unchecked except that. Maybe there's a new version?
Sorry I can't confirm your bug!

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

How to make previous version documents(CS1 and CS3) without extension readable in InDesign CS5

I have some previous version documents of CS1 and CS3 on Mac which have been saved without any extension e.g 300, CS3doc etc.
When I open such documents in InDesign CS5 they appear to be unreadable . Only on selecting 'All documents' filter I am able to open those documents.
I want to make all such documents (which are without extension) readable with 'All Readable Documents ' also .
How I can do that, please help me !!!!!

The first thing I'd do is make sure the issue is really what I suspect it is - i.e. I suspect your extension-less documents don't have the proper type and creator.
If you fire up a Terminal window, you should be able to use the GetFileInfo command to check one of the files:
Assume 'sampleFile' is sitting on your desktop, you'd do
GetFileInfo ~/Desktop/sampleFile
(not sure when/whether GetFileInfo is installed on a Mac - I think it used to be part of Apple's developer tools, but on my Snow Leopard it resides in /usr/bin)
Check what it says for 'type' and 'creator'.
If these are not correct, we've confirmed that that's the reason why they don't show up in your file dialog.
If the issue is type/creator related, I can think of the following options:
a) Change your code to accept ANY file type/extension - I suspect this would work (not tested!):
openFileDialog->AddType( '????' );
If memory serves right, '????' should be accepted as a wildcard.
b) correct the file types BEFORE they are viewed in the File Dialog - for example, if these files are in a very specific folder somewhere, you might be able to scan the folder, and correct their type and creator (e.g. iterate through all extensionless files in folder 'xyz' and change their type and creator). A lot depends on how those files get there, and whether they are tied to a specific folder or not - are they 'old' files, or are they being generated in some workflow? If they're all over a user's system or all over a file server, such pre-scanning and cleaning up file types approach will be a no-go.
Cheers,
Kris

AppleScript InDesign Document Save as

Hello @ All!
I tried my first AppleScript. I tried to open a document and use "save as" (without dialog) to save the opened file in a new place and with a new name.
in case of question: i have to use indesign for a convert of the format.
Here is my Code-Snippet: (the part mentioned in the SDK failed!)
tell application "Adobe InDesign CS4"
set myDocument to open "Mac:IDS:InD-Files:delete_Test.indd"
if saved of active document is true then
tell active document to save saving in "Mac:IDS:test.indd" --speichern ohne save-dialog
end if
close document 1 --Dokument schließen
--end repeat --ende der schleife
display dialog "Alle Dateien bearbeitet"
end tell
After Running i get the failure message:
„saving of "Mac:IDS:test.indd"“ kann nicht gelesen werden."
cannot read this path or file.
The path exists.
What am i doing wrong? or where is the mistake!
Thanks for your help.
Kind regards

try this:
tell active document
save to "Mac:IDS:test.indd" --speichern ohne save-dialog
end tell

Version to save PDF (for web view/printing)

Hello,
I am going to be linking an employment application on my client's website as a PDF. I am not sure what version to save it as (version for Acrobat Reader) so that it's most compatible with those visitors coming to the site. Does anyone know what would be a safe bet as far as what version to save my PDF as?
Also, does anyone have any tips on how to best save it for downloading online but then printing it out?
Thanks!
Ashley

You should probably go back to at least AA7, though there are those still using vers 4. You need to be a bit careful if you have added anything fancy, it will be lost. Also, if the form is to be used a lot (500 times is the limit), you do not want to activate Reader Rights (it is a violation for more than 500 uses). Just have the form submitted by having it printed or by submitting the form data (FDF file). For an application, you would want the submission to be to a web site (secure site preferred) due to the confidential information that would be included. The form data can be imported to the form using the FORMS>Manage Form Data>Import. You can do some database work directly from Acrobat (I am not good at that and the appropriate subforum is for forms) or you can use the tools in the FDF Toolkit to write server side code for the submission and data manipulation (there are Perl and C code examples in the toolkit).
Good luck.

How PLM Document save on content server

Hi All,
Please tell me the concept about given below scenario:
Normally PLM documents are either saved in the Content Server or in the database.
What if we have neither configured a database nor a content server. Where are they being stored then.
what exactly Document serever , how the PLM document save on Content Server or in data base server.
Thanks
Narendra Vikram Vishwakarma

Hi Vishwa,
It depends on the storage area that you have maintained in the sap system for the documents. The customisation in the sap system is visible at IMG-->Cross Application Components -->Document Management --> General Data --> Settings for storage system. The storage area that you configure here will be linked to the DIR creation process.
The SAP DMS is a file directory in the SAP server and a content server is a seperate Sap certified server usually maintained for handling files. However these topics are much more broader and you can have an overview by checking the following link www.verbellacmg.com/ulm211_v2.ppt
Sojan

Can you print document save in pages under iCloud

Can you print documents save in pages under iCloud

The easiest solution may be to Duplicate the file in iCloud by highlighting it / Right Click / Duplicate
Drag the Duplicate to the Desktop and Print

Setting create date for versioned documents

Hi,
I'm trying to explicitly set the create date for a versioned document (as in, the versions for the document), using the Content DB java API.
What I'm trying to do is basically this (pseudo-code):
- Create an unversioned document (the folders do not have auto-version turned on) with the create date explicitly set. This works fine.
- Make it versioned
- Check it out, upload a new version with the create date set, check it back in
It is at the last step where I seem to have problems -- the act of checking a file back in seems to reset the create date to be the date of checkin rather than the date I set.
Is there any way of accomplishing what I'm trying to do?
Thanks,
Phill

Hello,
why so complicated? You can do all in one ;)
Check this out:
How to upload file to Conetent database and remain the creating date
In the end its like this:
Item verTest = fileM.createDocument(
new NamedValue[] {
ClientUtils.newNamedValue(Attributes.CREATE_DATE, olddate)
gl
Matthias

Possible version 9 document save bug?

Similar Messages

Maybe you are looking for