Possiblity of message getting lost

I am using JCAPS 5.1.2. We have an interface where multiple calls are made at the same time to a particular JMS queue. The connection mode of the JMS queue was connection consumer mode and it frequently used to bring down the integration server. We have changed the connction mode of the JMS queue to serial mode which have bring stability to the integration server.
My query is , Is there any chance of any message getting lost from the queue, especially when multiple messages are being sent to the queue at the same time while in the serial mode?

This question really needs to be answered by a Java CAPS expert. I suggest you ask it in the Sun Java CAPS forum at
[http://forums.sun.com/forum.jspa?forumID=882|http://forums.sun.com/forum.jspa?forumID=882]
Nigel

Similar Messages

  • MailAdapter - Message gets lost

    Hi everyone,
    I have configured a Mail-Adapter configured as a Sender.
    The Adapter polls a message from a POP3-Server and he should deliver the message to a receiving step of the Intergration Process.
    I can tell, from the logs of my mail-server, that the Mail-Adapter polls the message but then the message get's lost.
    It doesn't appear in the XML - Monitoring. In the Adapter - Monitoring I'm able to see that the Mail-Adapter received a message.
    But then the message is never seen again - it went where no men has gone before - the final frontiers - those are the adventures of the message - ship XI
    Any ideas ?
    Thanks in advance,
    Frank

    The iPhone includes RAM (temporary memory) as with your computer.
    Different from the email client used on your computer, the iPhone's Mail app doesn't include an automatic save as Draft every so often while composing a message. When leaving a message while being composed, you are prompted to save the message as a Draft. If the iPhone powers off and you aren't prompted to save the message as a Draft, the message is gone. If the message is not in the account's Drafts mailbox, it is gone. When an iPhone is powered off and on, the RAM is cleared/reset - the same with your computer.

  • Messages get lost between IE and AE (IDoc to SOAP - Async)

    Dear Experts,
    in a IDoc to SOAP (Async) scenario a message was not transferred. I could not see any error message in RWB or ABAP Monitoring. When I enter RWB, the column engine is "Integration Engine" and the status is "Successful". At the same time other message with the same message interface were transmitted and they have engine "All" and status "Successful".
    Why was this message not passed on to Adapter Engine? How can I restart the processing, so that the message is transfered?
    Best regards,
    David

    Thank you for your answers:
    @ Divyesh:
    I can't resend the message. It does not have an error status. It says "Successful", although it only can be seen in Integration Engine, not Adapter Engine. There are not SM58 errors.
    @ Krish:
    In ABAP Monitoring all steps were performed as expected. Before and after this message some other messages with the same message interface were transmitted and they are visible in ABAP Monitoring, Inegration Engine and Adpater Engine.
    @Hareenkumar:
    In SAP everything looks like expected.
    The only difference between this message and other messages sent at the same time (which were transmitted correctly) is that in RWB Message Monitoring (Component: Integration Server) the Engine is "Integration Engine" instead of "All". And the message is not visible when you select for component "Adapter Engine".
    Do you have another idea?
    Thanks in advance,
    David

  • Soap faultcode and faultstring getting lost

    Hi,
    I'm having a problem with Adobe Flex not returning the soap
    fault details that is being returned in the Soap Fault.
    I am using Flashplayer 9,0,16,0 , Adobe Flex Builder 2
    Version 2.0.14359 and XFire 1.2 for Webservices.
    The Soap Request is :
    <SOAP-ENV:Envelope xmlns:xsd="
    http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="
    http://www.w3.org/2001/XMLSchema-instance"
    xmlns:SOAP-ENV="
    http://schemas.xmlsoap.org/soap/envelope/">
    <SOAP-ENV:Body>
    <saveUser xmlns="
    http://ws.raid.aem.com.au">
    <ns0:in0 xmlns:ns0="
    http://ws.raid.aem.com.au">
    <ns0:administrator xmlns:ns0="
    http://vo.ws.raid.aem.com.au">false</ns0:administrator>
    <ns0:email xmlns:ns0="
    http://vo.ws.raid.aem.com.au">[email protected]</ns0:email>
    <ns0:firstName xmlns:ns0="
    http://vo.ws.raid.aem.com.au">John</ns0:firstName>
    <ns0:id xmlns:ns0="
    http://vo.ws.raid.aem.com.au">1</ns0:id>
    <ns0:lastName xmlns:ns0="
    http://vo.ws.raid.aem.com.au">Smith</ns0:lastName>
    <ns0:password xmlns:ns0="
    http://vo.ws.raid.aem.com.au">secret</ns0:password>
    <ns0:permissions xmlns:ns0="
    http://vo.ws.raid.aem.com.au"/>
    <ns0:username xmlns:ns0="
    http://vo.ws.raid.aem.com.au">jsmith</ns0:username>
    </ns0:in0>
    </saveUser>
    </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    The Soap Respones is :
    <soap:Envelope xmlns:soap="
    http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsd="
    http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="
    http://www.w3.org/2001/XMLSchema-instance">
    <soap:Body>
    <soap:Fault>
    <faultcode>soap:Client</faultcode>
    <faultstring>This message gets
    lost!</faultstring>
    </soap:Fault>
    </soap:Body>
    </soap:Envelope>
    And the fault that comes through in Flex is :
    RPC Fault faultString="HTTP request error"
    faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent
    type="ioError" bubbles=false cancelable=false eventPhase=2
    text="Error #2032: Stream Error. URL:
    http://localhost/raid/services/UserManager"
    URL:
    http://raid.aemgroup.com.au/raid/services/UserManager"
    at mx.rpc::AbstractInvoker/
    http://www.adobe.com/2006/flex/mx/internal::faultHandler()
    at mx.rpc::Responder/fault()
    at mx.rpc::AsyncRequest/fault()
    at ::DirectHTTPMessageResponder/errorHandler()
    at
    flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/flash.net:URLLoader::redirectEvent()
    The soap faultcode and faultstring are getting lost.
    Anybody have this problem or know what is going on?
    Thanks,
    Daniel

    Hi ! I have exactly the same problem...
    I can't (or don't know how to) access to faultstring and
    faultcode generated by the webservice.
    Here what I found :
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=3c6784bc
    I use a Webservice generated by PHP5 and I don't know how to
    change the status code of a response...

  • Synchronous scenario: How to be sure that messages don't get lost?

    Dear all,
    my scenario is split into two parts:
    SAP -> PI  : We received a RFC (without sending a response) and split the message into single
                      files that we saved on PI filesystem
    PI -> WS:  We send the messages to a web service.
    But because we read it from file system I am not quite sure how to handle this.  If the
    web service is not available a normal synchronous web service message is normally stopped
    and can not be restarted.  How can I be sure, that the message will not getting lost?
    The only way I could see is the support that see the erroneous message an inform the business.
    Is it possible to automate the process if the web service is not reachable?
    If the web service sends an error code, I can handle this with conditions in receiver determination,
    but technical problems will just stop the message, wouldn't it?
    Regards
    Chris

    Hi,
    Syncronous messages once failed in PI can not be restarted . To inform business you can use several options :
    1. Use Interface specific alert so that when the particular interface fails alert will be triggered and sent to respective recipients.
    2. You can also right the ABAP report which sends the emails with payload for the messages which have failed . You can also shedule this report as per your need .
    Regards,
    Ganesh

  • I recently thought I lost my iPhone and I erased it but now that I found it. I cannot get the this iPhone message is lost please call ********* I am out of the country my laptop is at home. I cannot access I tune. How do I fix this. I have an iPhone 4s

    I recently thought I lost my iPhone and I erased it but now that I found it. I cannot get the this iPhone message is lost please call ********* I am out of the country my laptop is at home. I cannot access I tune. How do I fix this. I need to get it back on so I can face time with my family. The phone says 3G but it keeps saying on list mode. I signed on icloud and removed it from the account and nothing. Please help!

    If you removed the device from your iCloud account rather than using the "Stop Lost Mode" option, then you will most certainly need to restore the iPhone, and that will require a computer running iTunes.
    http://support.apple.com/kb/HT1414
    Regards.

  • HT1386 Switched from ipod to ipod touch. When trying to sync songs get lost. Show in the library and playlist but a message says cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?

    Switched from ipod to ipod touch. When trying to sync, songs get lost. Songs show in the library and playlist but get a message that says songs cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?

    The ! Next to a song:
    The song can’t be located; it may have been moved or deleted
    To find them try:
    iTunes: Finding lost media and downloads
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Looking for a SQL query to get all the possible Alert Messages from the Rules in a Management Pack

    For reporting, I'm looking to get a SQL query of all the possible Alert Messages for Rules configured in a Management Pack (not necessarily the ones that have thrown alerts).  I can do this for Monitors, but not for Rules. 
    The configured alert messages for the Management Pack Monitors
    go like this:  ManagementPack > MonitorView> RuleModule > RuleModule.Alert Message > Localized Text
    The configured alert messages for the Management Pack Rules
    should go something like this, but there is a missing link:  ManagementPack > RuleView > RuleModule > ? Missing Link ? > Localized Text
    The Rules are tied to the Module, but I don't see a connection from the RulesModule to the Alert Message that I see in the LocalizedText. The Rule names do not always equal the Alert name. 
    Can someone provide the missing link?

    Hi,
    please try below powershell code to find the corresponding management pack for specific alert:
    $Alert = get-scomalert | where {$_.Name -like 'Agent Proxy Not Enabled*'} | select -first 1
    If ($alert.IsMonitorAlert -eq "True") {
    write-host "Ths is a monitor-generated alert"
    get-scommonitor -ID $Alert.MonitoringRuleID | select Enabled, DisplayName, ManagementPack
    else
    write-host "This is a rule-generated alert"
    get-scomrule -ID $Alert.MonitoringRuleID | select Enabled, DisplayName, ManagementPack
    In addition, please also refer to the below link:
    http://blogs.technet.com/b/mazenahmed/archive/2011/12/02/using-powershell-to-map-opsmgr-active-alert-to-its-corresponding-rule-monitor-and-management-pack-name.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • Messages are getting lost during server restart

    Hi,
    we have a clustered environment.
    soa_server1, soa_server2, soa_server3 and osb_server1, osb_server2, osb_server3
    Queues are configured on each server.
    Overall process flow is (JMS Queue (configrued in soa_server1) --> BPEL --> mediator -->JMS (configrued in osb_server1) --> proxyService --> Target System.
    When there is a need to bounce the server (start / stop) ; and to make sure messages are not lost during server bounce.
    we are following the below procedure for server start
    1) pause soa_server1 queues then bounce soa_server1
    2) pause soa_server2 queues then bounce soa_server2
    3) pause soa_server3 queues then bounce soa_server3
    We are observing there is a message lost after server bounce...
    thanks in advance
    anvv sharma

    Are you using XA connection factory? If no then this may cause message loss. It is also considered a best practice to configure error queue for JMS queues to avoid message loss (as a precautionary measure).
    How did you find that messages are getting lost?
    Regards,
    Anuj

  • What if I accidentally deleted 1 contact Integrated messages is there a possible way of getting that conversation back?

    Help, What if I accidentally deleted 1 contact Integrated messages is there a possible way of getting that conversation back?

    I'm sorry to learn that an important conversation was deleted in error CDRINGL! As indicated by Snn5 (thanks!), it is not possible to retrieve deleted conversations.
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • Can I recover text messages from an old Iphone that has now been wiped? Some of my messages got lost in between the process of turning my old phone in for a new one-which I have since restored from a backup a few days old

    In the process of exchanging my defunct Iphone for a new one, some important text messages were lost. The messages obviously did not transfer over to my new phone as I had to restore my new phone from a backup performed a few days ago. Is there a special trick that will allow me to somehow enter my cell number, since it is still the same, in order to recover texts that were received in between wiping my old phone and getting a new one?

    You can use an iPhone file explorer such as TouchCopy to get the messages off the old phone. But you can't put them on the new phone as messages. You could put them in a pdf file that you could read on the new phone.
    Normally when you get a new phone the first thing you should do is transfer the contents of the old phone to it (Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support)). Then the problem does not arise. You are even prompted to do this when you activate the new phone. Once you have started using the new phone without doing this it is too late.
    To tell Apple your concern go to http://apple.com/feedback. This is a user to user forum; Apple does not read or participate in it.

  • Blank spaces at the end of an IDoc text field get lost when posted to R/3

    Hi Guys,
    I am facing the following issue:
    In an XML file-to-Idoc scenario, there are spaces at the end of a text field in the inbound XML file, which I can see when I open the inbound file with a text editor like notepad, and they are kept after XI mapping is executed (I can see them in message mapping simulator). However, it seems that these spaces get lost once the IDoc is posted to SAP R/3 and they are not visible on SAP R/3 side.
    Do you have any idea ? Thanks.
    Best Regards,
    Evaggelos Gkatzios

    That means SAP is removing the spaces from IDoc fields, where you spaces are not allowed. Does it create any problem?
    Thanks,
    Nabendu.

  • Message getting stuck in XBQO queue - Time limit exceeded

    Hi All,
    We have a BPM scenario in our project (on PI 7.0 SP18), where bundle of PEXR2002 Payment IDocs are received as a single flat file. This file is then consumed by the BPM, to split the message into multiple payments using Java Mapping.
    However, when we get an IDoc file of size greater than 5 MB (more than 500 IDocs), the message gets stuck in XBQO queue and eventually giving a SYSFAIL with the message "Time limit exceeded". Could you please let us know if you have encountered a similar issue and are aware of a possible solution.
    Any pointers to this will be really appreciated.
    Thanks & Regards,
    ROSIE SASIDHARAN

    H Rosie,
    1)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  EO_MSG_SIZE_LIMIT->possible values 0 - 2,097,151 (KB)
    The parameter EO_MSG_SIZE_LIMIT enables serial processing of messages of a particular size. This applies for messages with the quality of service Exactly Once (EO). If the message is larger than the parameter value, the message is processed in a separate queue.
    2)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  HTTP_TIMEOUT->possible values n Seconds, where n is a whole number.
    The parameter Specifies the timeout for HTTP connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
      See SAP Note 335162  for sysfail issue....
      Hope these will help u....
    Regds,
    Pinangshuk.

  • Messages getting stuck in QRFC Queue

    Hi,
    Today I noticed that a message had gotten stuck with the status "Sheduled for Outbound Processing" (scenario IDOC->XI->File), XI 3.0 SP11.
    This in turn had the effect that the whole QRFC queue got stuck, and all following messages got stuck with status "Sheduled".
    I had to remove the first message from the queue manually so that XI could start to purge the other messages from the queue.
    What could be the reason for the first messages getting stuck with this status ("Sheduled for Outbound Processing")?
    The message was very small, just a couple of lines. One thing that comes into mind, is that XI received 4 IDOCS for the same interface, within one second. These 4 messages were assigned to different queues, but one of them got stuck. Could there be problems with XI when several messages arrive on the same interface within a very short time?
    Is it possible to use Alerts to detect this kind of problem in the future? As I have understood, Alerts only handle XI "errors", but according to XI, this message did not have an "error status", it just had the status "Sheduled for Outbound processing"..
    Thanks for any help,
    Hans

    Hi,
    If the message got struck in Queue, you try to activate the queues in smq2 to reprocess the data instead of deleting it. This is the final solution. But you should able to see a dump in ST22 for this problem.
    thanks,
    sasi

  • Mountain Lion mails with attachments on exchange get lost

    Dear Community,
    we encounter a real annoying and weird issue with CS6 on our Macintoshs using Mountain Lion 10.8.2.
    It all started, that mails with attachments (e.g. JPGS, PDFS...) just get lost and do not arrive. Not all mails but some, spontaneously. But always the same files were affected. Some work, some not.
    Our company is using Exchange, and there is no message back to the sender, that the mail did not arrive. You can even see it on sent items and it occurs in Outlook 2011 as well as Apple Mail. I contacted our IT and they checked the Exchange logs and everything is fine, like the mail would have arrived, bit it does not.
    We went crazy and tried almost everything, clean OS installs, new users... the funny thing: when you forward the mail out of "sent items" it arrives...
    Today a milestone appeared while troubleshooting this issue: We realized, that only files saved from Photoshop, Indesign, Illustrator (basically CS6) are affected. When I save a PSD as a JPEG out of Photoshop and mail it as an attachement it gets lost. Always. Same for PDFs or other file formats out of CS6.. When I open a PSD  on embedded Mac Viewer and export as JPEG or PDF it does arrive the sender. So it only happens when saving the files out of CS6.
    So now, I have no clue how to proceed. Is anybody else having this issue or can help us? It is a mess, because it turns our daily work to a horror.
    Any help is appreciated solving this weird issue. Thank you so much.

    Hi ,
    You can try setting the below value to false and see the results too since its exceeding the recipient thread limit could be a problem with the throttling as well.
    <add key="MailboxDeliveryThrottlingEnabled" value="False" />
    Restart the transport services after the change and see the results.
     Good Luck :)
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com
    Hello, thanks for the try,
    tried the change in edgetransport.exe.config. Restartet the 4 transport services (Transportdelivery,transportsubmission, transport and transport logsearch) No change though. Problem still exists. May this go into msexchangethrotteling.exe.config? 
    Regards
    Michael

Maybe you are looking for