Power consumption and thermal dissipation for SG 100-24

Hello,
I need to know the following informations about Switch model SG 100-24
- power consumption (watt)
- thermal dissipation (BTU/hour)
Please may somebody help me out on this ?
(by the way such information is not in the Cisco documentation)
Thank you,

Hi Dave,
thank you for your interest, please do not forget the thermal dissipation.
Both power wattage and thermal information are essential for sizing a rack of many different appliances.
Looking forward to your answer then. Thank you
Regards, Giovanni

Similar Messages

Thinkwatt: record power consumption and visualize it with gnuplot

https://github.com/mikar/thinkwatt wrote:
Thinkwatt is a bash script for use with thinkpad laptops. However, as of v0.2, it works with all kinds of laptops as long as they've got a battery attached.
Thinkwatt can
* record your power consumption,
* calculate an average of that consumption
* and visualize that data in a 2D gnuplot graphic.
options:
-r, --record record power consumption and optionally create a graph from the gathered data
-p, --plot create a plot image from a specified data file
-a, --average calculate the average power consumption from a specified data file
-q, --quiet makes thinkwatt less chatty
-o, --output the output file. can be prepended by a path.
-h, --help show this help text
examples:
thinkwatt -r (will record to a temp file until cancelled)
thinkwatt -r 300 -o /foo/bar/consumption.dat (will record for 5 minutes to the specified file)
thinkwatt -p /foo/bar/consumption.dat (will create a graph from the specified file)
Thinkwatt works with all laptops, not just Thinkpads.
If you're running thinkwatt on a Thinkpad it is still recommended to use tp_smapi as it provides more accurate results than the generic acpi.
This is an example of what the graph can look like:
It's mainly useful for retracing power consumption during certain situations (e.g. measuring the influence of certain hardware or software (kernel comes to mind), or simply reliably gather typical power consumption for certain activity profiles like surfing, working, watching movies etc.)
I guess I'll add to the script when and if time and my bash skills allow it. Suggestions for improvement are always welcome.
You can get thinkwatt from my git repository here or the AUR here.
Regards,
demian
Last edited by demian (2011-05-28 21:10:30)

akurei@joel: ~ $ LANG=C thinkwatt -r 60 /home/akurei/test
recording power consumption for the next 60 seconds
/usr/bin/thinkwatt: line 100: /tmp/thinkwatt/28606.dat: No such file or directory
mv: cannot stat `/tmp/thinkwatt/28606.dat': No such file or directory
error: file not found.
average consumption during the last 60 seconds was W
do you want to create a graphic now, too? y/n y
error: file not found.
akurei@joel: ~ $ LANG=C thinkwatt -r 60
recording power consumption for the next 60 seconds
/usr/bin/thinkwatt: line 100: /tmp/thinkwatt/29019.dat: No such file or directory
error: file not found.
average consumption during the last 60 seconds was W
do you want to create a graphic now, too? y/n y
error: file not found.
akurei@joel: ~ $ yaourt -Qi gnuplot
Name : gnuplot
Version : 4.4.3-1
URL : http://www.gnuplot.info
Licenses : custom
Groups : None
Provides : None
Depends On : readline gd wxgtk cairo libjpeg lua
Optional Deps : None
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 3016.00 K
Packager : Ronald van Haren <[email protected]>
Architecture : x86_64
Build Date : Fri May 6 10:55:29 2011
Install Date : Mon May 16 17:04:26 2011
Install Reason : Explicitly installed
Install Script : Yes
Description : Plotting package which outputs to X11, PostScript, PNG, GIF, and others
akurei@joel: ~ $ yaourt -Qi tp_smapi
Name : tp_smapi
Version : 0.40-5
URL : http://tpctl.sourceforge.net/
Licenses : GPL
Groups : None
Provides : None
Depends On : mkinitcpio>=0.6.8 module-init-tools>=3.12-2
Optional Deps : None
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 220.00 K
Packager : Michael Duell <[email protected]>
Architecture : x86_64
Build Date : Mon May 16 17:03:41 2011
Install Date : Mon May 16 17:03:50 2011
Install Reason : Explicitly installed
Install Script : Yes
Description : Modules for ThinkPad's SMAPI functionality
akurei@joel: ~ $ yaourt -Qi gawk
Name : gawk
Version : 3.1.8-2
URL : http://www.gnu.org/directory/GNU/gawk.html
Licenses : GPL
Groups : base
Provides : awk
Depends On : sh glibc
Optional Deps : None
Required By : autoconf syslog-ng sysvinit thinkwatt
Conflicts With : None
Replaces : None
Installed Size : 2224.00 K
Packager : St
Architecture : x86_64
Build Date : Sat Nov 20 04:00:45 2010
Install Date : Thu May 5 19:05:55 2011
Install Reason : Explicitly installed
Install Script : Yes
Description : Gnu version of awk
akurei@joel: ~ $ yaourt -Qi sed
Name : sed
Version : 4.2.1-3
URL : http://www.gnu.org/software/sed
Licenses : GPL3
Groups : base
Provides : None
Depends On : acl sh
Optional Deps : None
Required By : ca-certificates fakeroot grub mkinitcpio packer thinkwatt
Conflicts With : None
Replaces : None
Installed Size : 804.00 K
Packager : St
Architecture : x86_64
Build Date : Fri Nov 19 22:35:32 2010
Install Date : Thu May 5 19:05:55 2011
Install Reason : Explicitly installed
Install Script : Yes
Description : GNU stream editor
akurei@joel: ~ $ lsmod|grep tp_smapi
tp_smapi 20043 0
thinkpad_ec 4085 2 hdaps,tp_smapi
Last edited by akurei (2011-05-16 15:36:40)

HT1430 locked ipod touch with password - tried to reset ipod by holding power button and home button for 10 seconds and it still came up asking for a passworkd

locked ipod touch with password - tried to reset ipod by holding power button and home button for 10 seconds and it came up asking for password again

If you forgot your screen-lock passcode then:
Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Backing up, updating, and restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
You can redownload iTuns purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I hit the power button and it runs for a second then turns off but the power buttton stays lit

i hit the power button and it runs for a second then turns off but the power buttton stays lit

What machine?
Mac Pro? Mac Pro what?
If Mac Pro, wrong forum. Go here:
Mac Pro

Power consumption and on/off status?

Greetings!
One: I am trying to find out what the power consumption is for the iPod Hi-Fi in watts.
Two: Is the Hi-Fi drawing power if the Hi-Fi is plugged into the wall but the iPod is not in the dock?
These questions are not covered in the literature nor on the website. When I called the Helpline, six different customer service and technical support staffers didn't know either answer. The Apple Store employees in San Diego also didn't know.
A suggestions for the next generation of Hi-Fi: Make it so the unit does not draw power unless an iPod is in the dock or an auxiliary input plug is not connected.
This would allow my Hi-Fi to be placed in a bookcase in a semi-permanent installation not requiring the need to be unplugged everytime the iPod was not in use.
Thanks,
Ralph
iPod 30GB & iPod Hi-Fi

One: I am trying to find out what the power
consumption is for the iPod Hi-Fi in watts.
Are you interested in the sound output, as specified by many loudspeaker makers? Or did you only want to know the drain from the mains supply, for cost or environmental reasons?
If the latter, finding someone with a watt meter would be the easiest way. Apple do not specify the power consumption. I would guess they didn't want to get into a competition about whose loudspeaker has the most music power (since everyone lies).
If I had to guess, I would think around 25 watts peak when running on batteries, around 80 watts peak when running on AC. That is a very rough guess based on how long batteries last (5 hours), the sound output difference between battery (102dB) and AC (108dB), and the likely efficiency of their amplifier (80%).
Testing with a watt meter would be a much better way to come up with a figure. I gather they are cheap and readily available in the USA (scarce and expensive here).
Two: Is the Hi-Fi drawing power if the Hi-Fi is
plugged into the wall but the iPod is not in the
dock?
Yes. Any device with a soft power switch draws power when not physically unplugged. However I would imagine in that state consumption would be less than one watt. Apple would almost certainly have used the same methods they use to reduce power on sleeping computers (when there is no input signal for a while).

App Power Consumption and Restrict

Settings > Power Management > App power consumption
If there is any app listed in the UNUSED APPS section, tap into the app, there is an "Restrict" button.
Can someone help to explain what does it do? If an app is restricted, how can I unrestrict it? Where to see a list of restricted app?
Thanks.

Hi,
When an application is not in use, it can consume processing power and thereby reduce the battery consumption. As far as I know, when you press the restrict button, you will force a shutdown of the application (to make sure it's not an active app in the background e.g). It's the same thing as you can do if you go to Settings > Apps > The tab "All" > Tap an app > Force stop.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Is this Power Supply and case right for my PC?

Pals...
Here I go again with a brand new question.
I want to buy a new case with the Power supply Unit in it and I have come to the decision of buying them separately.
My machine at the moment is made up of...
AMD Athlon 64 3200+ Processor Socket 939
MSI K8N Neo-4 Platinum Socket 939 motherboard
MSI NX GeForce 6600GT 128 Mb PCI-E VGA card (connected thru the PCI-E, actually)
2 521 Mb Kingston DDR Memory 400 - 3200
1 120 GB Western Digital HD PATA (with OS: Windows XP Professional SP2)
1 120 GB Seagate HD PATA (with files only)
1 Pioneer 109 DVD-RW
1 Pioneer 111D DVD-RW
1 generic Floppy
Anyway, this is the Case I want to buy
More information here...
http://articulo.mercadolibre.com.ar/MLA-22331044-gabinete-vitsuba-master-550w-fan-120mm-lcd-frontal-vtb-_JM
and this is the Power Supply
More information here
http://articulo.mercadolibre.com.ar/MLA-22621114-fuente-vitsuba-san-55-s-fuente-vtb-colosa-550w-20-24-pines-_JM
Now, In the PSU, there is a comment that it has 20-24 pins. What the hell are they? Are the Case and PSU fine for the computer I have?

vandienk,
If you know anyone coming to the U.S. I have some much cheaper options for you:
Rosewill RD600-2DC-SL 600W Active PFC Power Supply SLI Ready ATX Form Factor 12V V2.2 / SSI standard EPS 12V, 90-264V CSA,UL,TUV $68.99
MSI TurboStream 600W ATX 12V V2.2 EPS12V 600Watts Power Supply 115/230 V Safety / EMI Approvals: FCC certification $69.99
Mushkin 550200 ATX12V 550W Power Supply 115/230 V cUL,CE,CB,FCC $89.99
ePOWER ZU-600W ATX 12V v2.01 600W Power Supply 115/230 V CSA, TUV, FCC, UL $89.99
Take Care,
Richard

New power supply and graphic card for Compaq CQ3232L

Hi all,
I am using Compaq CQ3232L and would like to upgrade the graphic card with one of the HD 5770, Sapphire HD 5770 Vapor-X 1Gb 128Bit DDR5 to be exact.
My current power supply (Bestec Model ATX01...) specs are:
+12V/11A, peak 13A
+5V/10A, +3.3V/10A,
-12V/0.3A, 180W according the manual.
I've been looking a replacement for the power supply but not sure which one will fit the case? And how much power will be need to run the Sapphire card and future upgrade (Blu-Ray drive and another HDD)?
Regards,
Eko

WSH, besides measuring the PSU, you should assure that there is sufficient space for the video card. Open the case. Measure from the edge of the case to the opposite side of the motherboard where the PCIE slot is located. This is the approximate length of the card that will fit.
Also, I like OCZ and Corsair PSU's. They are both enthusiast/gamer manufacturers. Their products will provide clean, stable power for your system.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Searching Dock with for Power supply and Audio Out for iPhone 3GS

Hello,
I am rather new to Apple stuff but I now have an iPhone 3GS which I would like to use with my Yamaha Pianocraft.
The Yamaha has an optional iPod Dock. As far as I know, this would allow me to do things like pause, next track etc. via the Yamaha remote. However, I don't really need this and I would also like to be able to play audio from apps such as internet radio apps (e.g. 977)
So the Yamaha also has an AUX/Audio In connector on the back where I can simply connect my iPhone 3GS. Then I will just hear everything not through the iPhone speakers but through the Yamaha A/V Receiver.
However, this option would require me to have a cable connect at the top (headphone jacket) and at the bottom (connector for power supply), which does not look that good.
So I would like to have an iPhone 3GS dock that provides audio out as well as power supply. I have found three products for this (German Sites because I live in Germany):
Apple iPhone 4 Dock:
http://store.apple.com/de/product/MC596ZM/A?fnode=MTY1NDAzOQ&mco=MTgxNTkwOTg
Apple Universal Dock:
http://store.apple.com/de/product/MB125G/C?fnode=MTY1NDAzOQ&mco=MTA4NDc4NDA
Amazon:
http://www.amazon.de/Dockingstation-Apple-iPhone-Audio-Out-wei%C3%9F/dp/B003UP77 HQ/ref=wlit_dpo?ie=UTF8&coliid=I18C98SXGWLNIF&colid=29EKL14S3VRAN
As far as I am aware, the iPhone 4 Dock from Apple cannot be used with the iPhone 3GS. Is that correct? Is there any solution or an "iPhone 3GS Dock" available?
Can these docks also provide the audio from apps via audio out?
I hope you can help me.

Well on the backsite this product has audio out but not power, only the iphone connector.
If I want to use this station in one place only and not for syncing, I will have to buy another iPhone USB cable and another wall to USB adapter (altough I have come at home from other products).
Is there no dock that will not require some special iPhone cable?

Power consumption and UPSs

I'm trying to figure out what kind of UPS I need for my soon to arrive (2009) 2.93 8 core Mac Pro. Apple's support page seems to suggest that (for the 2.26 8 core, at least) it maxes out at 309 W? Or I guess that's not counting HDDs, but... why do I always hear numbers like 800 or 900 W when it comes do this issue? To be honest, even if I spent 500$+ on a UPS I'm still not sure that it would be okay for me to run 2 displays, monitors (speakers), a sub, etc... on the same UPS.
http://support.apple.com/kb/ht2836
Part of the reason I'm asking is that I'm not sure it's in my budget to invest in a single UPS for everything, since I NEED my UPS to be dead silent, which only increases the cost. I'm figuring out what it would cost me to get a UPS dedicated to my Mac Pro and nothing else, and then run other equipment off of a different one.
Thanks!

That links me to the APC UPS selector.
Over the last several days I've found several options that have been recommended, so I'm down to these options:
http://excessups.com/smartups-1500-sua1500-p-38.html - 250$
http://www.apc.com/resource/include/techspecindex.cfm?basesku=BR1500LCD - 250$
http://www.apc.com/resource/include/techspecindex.cfm?basesku=BX1500G ~ 180$
I'm mostly wondering what the main difference is between the second and third options, since I cant really see anything. I have read that I shouldnt buy refurbished UPSs. Why is this?
The Hatter: I tried looking for your recommendation and the closest thing I found was http://www.apc.com/resource/include/techspecindex.cfm?basesku=br1500i, which is way more expensive than 200$.

SGE2010 and SRW2008: Noise level and power consumption?

Hello!
I am looking for information on the actual noise level and power consuption produced by the forementioned models.
Many thanks in advance,
Luca

Luca,
Power consumption and other key hardware product attributes can be found in the following document (in the documents section of this community):
https://www.myciscocommunity.com/docs/DOC-8669
WRT noise levels, here they are:
SGE2010 - 51.4 dB
SRW2008 - N/A - there is no fan inside this switch - uses and external power supply
Thanks,
Ivor

Power consumption for latest mac pros?

I read on Apple.com somewhere that the 2008 Mac pro's maximum power consumption is 260+ Watts for a Quad-core. How different is it for the new Mac pros?

I guess English is a lost language now.
For the Mac Pro it is really really simple and based on 7 yrs of PowerMac G5s and then Mac Pro owners: 1500VA - you can get by with slightly smaller 1300VA and some people, because of better build, used SMART UPS 1000VA.
And as I said in another thread, the Mac Pro 'suffers' from inrush current that can knock out smaller UPS, and people that have tried to use 500-900VA units got into a lot of trouble and had to upgrade.
No one can know the total system watts used other than use a KILLAWATT on the power cord.
Look at the case, can an iMac dispel as much heat as easily? no. It is designed for lower power and much fewer components.
Core i7 has HyperTransport and Turbo boost for one thing. Apple had a huge coding problem with audio (incl iTunes and others), flash and Nehalem based systems. High cpu temperature and lost processor cycles and performance.
The 2010 Mac Pro can do more for the same, and DDR3 lowered heat and watts noticeably.
There are sites where you can plug in various components and get an idea of how large a PSU would be needed. Try one of those, too. PSU efficiency, and there is "overhead" needed for the motherboard chips and to run PCI Express for graphics, Firewire, etc. It all adds up.
Apple's example is low-end system configuration, the chart says CPU MAX, not SYSTEM (but then, most everything on hardware requirements lately needs a grain of salt).
Quad-core 2.66GHz configuration:
One 2.66GHz Quad-Core Intel Xeon "Nehalem" 3500 series processor,
3GB memory (three 1GB 1066MHz DDR3 ECC DIMMs),
640 GB Serial ATA 3 Gb/s 7200-rpm hard drive,
18x double-layer SuperDrive,
NVIDIA GeForce GT 120 with 512MB of GDDR3 memory
APC we know, whether PowerMac 2.0DP from 2003 or Quad G5, or Mac Pro, that 1500VA is strongly recommended.

Power consumption on Thinkpad X200 / X200T

Hello there,
Is anyone running Arch on a X200T or X200?
I would be interested in your power consumption and your settings to achieve that consumption.
I get around 10 to 11W with tlp installed (takes into account all powertop recommendations), PHC reduced voltages and with completely reduced brightness.
I find my result pretty disappointing and expected to get less than 10W. Thus I am interested in your results.
Thanks!

I forgot to mention that I use laptop mode tools for powersaving.
@orschiro
I learned that from http://batteryuniversity.com/learn/arti … _batteries
Also if you plan on using the laptop with the charger plugged in all the time you can even make the battery charge to 50-60%. I can't find the link for it right now, but the essence of it is that when your battery is at 30 degrees C its life is shortened faster if it is charged more. If you have some spare time you will learn a lot of usefull info from that site, I highly recommend it.
I made a little script to aid me in changing the charge thresholds. Call it with one parameter and it sets the stop charge threshold with it and start charge threshold 4 percent below it. Call it with two parameters and it sets stop and start charge thresholds respectively. Call it without parameters and it displays some usefull info(you will have to look at the source to make use of it the first time:)
It spits out some errors if you are plugged in but it works nonetheless. If you change the tresholds while plugged in your battery will charge all the way up to 100% no matter what parameters you give it(same if you set it via /sys interface manually, it's not the script that is buggy). I know it is not the most elegant script you've seen, but I am not a programmer :)
#!/bin/bash
bold=`tput bold`
normal=`tput sgr0`
time8_raq=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/8000" | bc)
time8_raw=$(echo "scale=0;$time8_raq * 60" | bc | awk '{ if ($0 ~ /\./){ sub("0*$","",$0); sub (".$","",$0);} print}')
time8_h=$(( $time8_raw / 60 ))
time8_m=$(( $time8_raw % 60 ))
time8="${time8_h}h ${time8_m}m"
time10_raq=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/10000" | bc)
time10_raw=$(echo "scale=0;$time10_raq * 60" | bc | awk '{ if ($0 ~ /\./){ sub("0*$","",$0); sub (".$","",$0);} print}')
time10_h=$(( $time10_raw / 60 ))
time10_m=$(( $time10_raw % 60 ))
time10="${time10_h}h ${time10_m}m"
time12_raq=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/12000" | bc)
time12_raw=$(echo "scale=0;$time12_raq * 60" | bc | awk '{ if ($0 ~ /\./){ sub("0*$","",$0); sub (".$","",$0);} print}')
time12_h=$(( $time12_raw / 60 ))
time12_m=$(( $time12_raw % 60 ))
time12="${time12_h}h ${time12_m}m"
time14_raq=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/14000" | bc)
time14_raw=$(echo "scale=0;$time14_raq * 60" | bc | awk '{ if ($0 ~ /\./){ sub("0*$","",$0); sub (".$","",$0);} print}')
time14_h=$(( $time14_raw / 60 ))
time14_m=$(( $time14_raw % 60 ))
time14="${time14_h}h ${time14_m}m"
time16_raq=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/16000" | bc)
time16_raw=$(echo "scale=0;$time16_raq * 60" | bc | awk '{ if ($0 ~ /\./){ sub("0*$","",$0); sub (".$","",$0);} print}')
time16_h=$(( $time16_raw / 60 ))
time16_m=$(( $time16_raw % 60 ))
time16="${time16_h}h ${time16_m}m"
time18_raq=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/18000" | bc)
time18_raw=$(echo "scale=0;$time18_raq * 60" | bc | awk '{ if ($0 ~ /\./){ sub("0*$","",$0); sub (".$","",$0);} print}')
time18_h=$(( $time18_raw / 60 ))
time18_m=$(( $time18_raw % 60 ))
time18="${time18_h}h ${time18_m}m"
timeest_h=$(( `cat /sys/devices/platform/smapi/BAT0/remaining_running_time` / 60 ))
timeest_m=$(( `cat /sys/devices/platform/smapi/BAT0/remaining_running_time` % 60 ))
timeest="${timeest_h}h ${timeest_m}m"
timeestnow_h=$(( `cat /sys/devices/platform/smapi/BAT0/remaining_running_time_now` / 60 ))
timeestnow_m=$(( `cat /sys/devices/platform/smapi/BAT0/remaining_running_time_now` % 60 ))
timeestnow="${timeestnow_h}h ${timeestnow_m}m"
powerest=$(echo "scale=1;(`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/(`cat /sys/devices/platform/smapi/BAT0/remaining_running_time`/60))/1000" | bc)
powerestnow=$(echo "scale=1;(`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/(`cat /sys/devices/platform/smapi/BAT0/remaining_running_time_now`/60))/1000" | bc)
remaining_capacity=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/remaining_capacity`/1000" | bc)
voltage=$(echo "scale=3;`cat /sys/devices/platform/smapi/BAT0/voltage`/1000" | bc)
temperature=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/temperature`/1000" | bc)
last_full_capacity=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/last_full_capacity`/1000" | bc)
design_capacity=$(echo "scale=1;`cat /sys/devices/platform/smapi/BAT0/design_capacity`/1000" | bc)
cycle_count=$(cat /sys/devices/platform/smapi/BAT0/cycle_count)
# fanspeed
fanraw=(`cat /proc/acpi/ibm/fan|grep speed`)
fan=${fanraw[1]}
if [ $# -eq 0 ]
then
echo ${remaining_capacity} Wh \| ${voltage} V \| ${temperature} C \| $${last_full_capacity}\/${design_capacity}\|${cycle_count}$ \| \{`cat /sys/devices/platform/smapi/BAT0/stop_charge_thresh` `cat /sys/devices/platform/smapi/BAT0/start_charge_thresh`\} \| `cat /sys/class/backlight/acpi_video0/brightness`
echo ${powerest}W est \| ${timeest} est \| ${powerestnow}W now \| ${timeestnow} now \| ${fan} rpm
echo ${time8}@8W \ ${time10}@10W \ ${time12}@12W \ ${time14}@14W \ ${time16}@16W
fi
if [ $# -eq 1 ]
then
echo "$1" > /sys/devices/platform/smapi/BAT0/stop_charge_thresh
echo `cat /sys/devices/platform/smapi/BAT0/remaining_capacity` mW \| `cat /sys/devices/platform/smapi/BAT0/voltage` mV \| `cat /sys/devices/platform/smapi/BAT0/temperature` C \| $`cat /sys/devices/platform/smapi/BAT0/last_full_capacity`\/`cat /sys/devices/platform/smapi/BAT0/design_capacity `$ \| \{${bold}`cat /sys/devices/platform/smapi/BAT0/stop_charge_thresh`${normal} `cat /sys/devices/platform/smapi/BAT0/start_charge_thresh`\} \| `cat /sys/class/backlight/acpi_video0/brightness`
fi
if [ $# -eq 2 ]
then
echo "$1" > /sys/devices/platform/smapi/BAT0/stop_charge_thresh
echo "$2" > /sys/devices/platform/smapi/BAT0/start_charge_thresh
echo `cat /sys/devices/platform/smapi/BAT0/remaining_capacity` mW \| `cat /sys/devices/platform/smapi/BAT0/voltage` mV \| `cat /sys/devices/platform/smapi/BAT0/temperature` C \| $`cat /sys/devices/platform/smapi/BAT0/last_full_capacity`\/`cat /sys/devices/platform/smapi/BAT0/design_capacity `$ \| \{${bold}`cat /sys/devices/platform/smapi/BAT0/stop_charge_thresh` `cat /sys/devices/platform/smapi/BAT0/start_charge_thresh`${normal}} \| `cat /sys/class/backlight/acpi_video0/brightness`
fi
exit 0

Ipad power consumption/drain?

I read somewhere that using the ipad's cover lock/unlock function with a compatible case actually increases power consumption and reduces battery life. Is there any truth to this as I've noticed faster battery drain since switching this feature on? I've foolowed all the power saving tips on other forums but drain still seems to have increased.
Any ideas?
Thanks!
Mark.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Yoga 2 Pro, Etekcity 16Ah power bank and some additional measurements

Hello guys, this would be my short review of Etekcity Wingman external battery I use with y2p. As you know, the y2p battery performance is a little disappointing for a Haswell ultrabook (at least for some), so it's a good idea to have some additional external battery beforehand. After some research I found the interesting candidate, the 16.000 mAh external battery manufactured somewhere in chinese factory (Shenzen?) and then being sold under many different brands (I found at least 5 of them on Amazon). I bought the Etekcity Wingman, as it was the cheapest, for 69$
No links here, but you will find it easily. It has a classy aluminium shell, very good overall build quality, features 5V USB output and additional 12, 16 and 19V outputs with many different plugs. There is no rectangular Lenovo Yoga tip, but in the package you can find the Lenovo X1 big circular plug. So you need an additional converter Cable Adapter from Lenovo, part no. 0B47046 and voila, everything fits.
This external battery can provide up to 19V and as you are aware, y2p needs 20V. But this is not a problem, it's only 5% difference and nothing to be worry about. As to the amperage, the battery can provide max 3A at 19V and y2p original power adapter is rated at 3.25A - but this is not a problem either, as during my actual measurements I never saw the current more than 3A (more about it later).
16.000 mAh for li-po cells 3,7V gives about 59Wh of power capacity and this is important. The internal y2p battery is rated 54Wh, so 'theoretically' the external battery should more than double our y2p working time. Well, theoretically, because: 1. as for chinese products they almost always overrate battery specs 2. there is a limited efficiency for internal voltage conversion inside the battery electronics, so there are some losses (heat).
So, what is the REAL capacity of this thing?
I did a test. I depleted internal y2p battery to 20% and then I plugged in the Etekcity Wingman, set at 19V. It was able to charge the WORKING laptop for 1 hour and 25 minutes and y2p battery charged from 20% to 85% before the Wingman shut down. It was a little warm while working, but not hot at all (aluminium shell dissipates heat very good).
What it means is that this external battery was able to provide about 2/3 (65%) of total internal y2p battery capacity and during that time the laptop was working consuming additional energy from the Wingman (70% brightness, wifi/BT on, some light browsing, nothing demanding). I am estimating that if the y2p was depleted completely and shut down, then the external battery would be able to charge it to about 80-85%. I find this result pretty good.
So if you are able to achieve some 6.5h on internal y2p battery, this external battery gives you another 5h more, for total 11.5h working time out of the socket. Not bad.
I have a laboratory digital power source, so I was able to do some additional interesting measurements (thanks to the cables and adapters):
1. The Yoga 2 Pro starts charging at about 16.5V voltage level(!) Anything lower - it won't charge, higher - it will (no BIOS warnings whatsoever).
2. The charging current for non-working laptop is about 1.6A (I did not set quick charge at Energy Manager).
3. 70% brightness, "daily" power mode, wifi/BT on, keyboard lighting on and doing some lazy internet browsing needs about 470mA of current (averaged, idle is about 415 mA, as each wifi activity creates current jumps). For 20V it gives 9.4 Wh of power consumption and for 54Wh y2p internal battery it gives about 5h 45min of working time. Lets set this situation as a "base" level.
4. Same as above, but power mode changed to "stable". Yellow turns mustard, but brightness intensity remains at 70%. The current goes down to about 420mA (50mA less!). It gives you additional 40 minutes for a total 6h 25min of working time.
5. Same as above, but keyboard light is off. About 20mA of savings, + 15 min for a total 6h 40 min
6. Same as above, airplane mode (wifi/BT off) - another 20mA of savings (not much), but there are no wifi current spikes so it's like idle mode - about 330mA of current consumption, giving about 8h 15min of working (word editing etc.)
7. Same as above, 50% brightness (still pretty usable) - 305mA for a total 8h 50min of working time.
8. Same as above, but with 16.000 mAh external battery - well, you figure it out (+80%)
Happy New Year!

20V/3.25A means that if looking for an external power bank for your y2p the voltage must be exactly 20V and the amperage must be 3.25A or more (3.25 is minimum value). These are perfect values.
But in real world some little deviances are permissible, like 5%. 19V and 3A are examples and I made sure that my external battery rated 19V/3A works good with Yoga 2 Pro. There are more 19V external power banks than 20V models out there and I've chosen my Wingman battery because it was really cheap. But it is always better to find one that meets voltage/amperage ratings perfectly.
The Energizer XP18000 would be a perfect choice, because it can provide 20V/3.5A. But I dont know if the Lenovo plug is inside the package. And it's expensive.
The "big circular plug" is 7.9 x 5.4 x 0.9mm plug for some other Lenovo machines, like Carbon X1. I never found an external power bank with "rectangular" y2p plug anyway.

Power consumption and thermal dissipation for SG 100-24

Similar Messages

Maybe you are looking for