Power off after putting iMac to Sleep

Have you ever experienced this?
Put you iMac to Sleep and it powers down - not a shut down, but the power goes off - no blinking light, no whirring of the hard drive, no sign of life!
I have read and performed many of the tips regarding NVRAM, SMU, PMU, etc. resets. None have worked.
Situation 1-
Use the 'sleep' command - moments after the machine powers off.
Situation 2 -
iMac screen saver will run for a short time, then screen goes blank, the power light illuminates, the fan spins full speed, and the machine is totally unresponsive to mice clicks or movements, or keyboard entries.
Situation 3 -
Sometimes upon power up, the iMac doesn't start, but you can hear a faint buzz sound from the back of the machine. Similar to audio hum.
These problems occur whether or not other devices are connected to the iMac.
Connections-
Standard USB devices - mice, card reader,
Bluetooth keyboard
Ehternet
Power Settings-
Screen saver 5 minutes
Energy Saver - to sleep when inactive - 15 minutes, display to sleep - 15 minutes.
Various other settings tried with no change in problem.
I suspect the power supply. What's your opinion?
iMac g5 1.8Ghz, 1gig mem   Mac OS X (10.4.9)  

Any solution to this?
Put you iMac to Sleep and it powers down - not a shut
down, but the power goes off - no blinking light, no
whirring of the hard drive, no sign of life!
I have read and performed many of the tips regarding
NVRAM, SMU, PMU, etc. resets. None have worked.
Situation 1-
Use the 'sleep' command - moments after the machine
powers off.
I began experiencing the same thing this week (two days ago). I also tried repairing permissions, resetting SMU, and removing the iTunes receipts (Library/Receipts) since this is what caused an earlier failure to sleep. The difference is then the computer would not sleep, now it shuts off instead of sleeping.
Situation 2 -
iMac screen saver will run for a short time, then
screen goes blank, the power light illuminates, the
fan spins full speed, and the machine is totally
unresponsive to mice clicks or movements, or keyboard
entries.
Have not yet encountered Situation 2.
Situation 3 -
Sometimes upon power up, the iMac doesn't start, but
you can hear a faint buzz sound from the back of the
machine. Similar to audio hum.
I have experienced this (Sit 3) as well with my LaCie firewire drive connected, sometimes. I have found that powering off the LaCie resolves this, as does unplugging it.
These problems occur whether or not other devices are
connected to the iMac.
Connections-
Standard USB devices - mice, card reader,
Bluetooth keyboard
Ehternet
Power Settings-
Screen saver 5 minutes
Energy Saver - to sleep when inactive - 15 minutes,
display to sleep - 15 minutes.
Various other settings tried with no change in
problem.
I suspect the power supply. What's your
opinion?
iMac g5 1.8Ghz,
1gig mem Mac OS X (10.4.9)
Another difference, I am running OS X - 10.3.9, otherwise the same
Any ideas?
iMac G5 & Beige G3 Mac OS X (10.3.9) 1GB Memory, LaCie Firewire external drive

Similar Messages

  • IMac shuts down after putting it to sleep

    Lately, my iMac G5 has been shutting down automatically after putting it to sleep. If I wake it up within a short period of time it is OK, but if I wait several minutes, it must be restarted.
    Did I accidentily change a setting? Or is it a problem with the hardware?
    Is there a setting I can check? I have tried to find one in Energy Saver and other places without success.
    Thanks,
    -tee

    Welcome to Discussions - Please tell us which model G5 iMac you have (iMac release dates).I don't think you changed anything, I would suggest that you reset the SMU and see if that helps.
    Please post back,
    Miriam

  • HT201150 The allow power button to put computer to sleep is missing in the preferences on my MB Air?

    The allow power button to put computer to sleep is missing in the preferences on my MB Air?
    I have the funtion but no way to turn it off?

    "Allow power button to put the computer...: Apple Support Communities
    uptalk - definition of uptalk by the Free Online Dictionary, Thesaurus and Encyclopedia.

  • Is it better to "lock" or "power off" after an Ipad 2 use? Why.?

    Is it better to "lock" or "power off" after an Ipad 2 use? Why.?

    A locked iPad is sleeping and will be usable much faster than one that has to be powered up. The sleeping iPad uses very little power, but it uses a few percent of the battery.

  • Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going to my pics and getting it back. Does anyone know why this keeps happening??

    Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going back to my pics and getting it back.
    Does anyone know why this keeps happening??

    Are you choosing it from one of these folders (in my screenshot) or you can also put that picture into the correct folder. The path is:
    HD > Library > Desktop Pictures
    If you add it to the folder manually, please restart your computer.
    And yes, letting it sleep is a good idea, or else the startup disk will spin and the screen may suffer from image persistence if you leave a window or image parked in the same spot too long, so the screensave is a good idea.

  • 3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

    3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

    And when you held them neither the red Off slider nor the Apple logo appeared?
    If not then your sleep button is broken, you will need to get it serviced.

  • My imac turns it self back on almost immediately after putting it to sleep.  Why and how do I fix it?

    This is new as of a few days ago.  I can't find anything in preferences to make it better nor did I change any setting.  Not sure what's going on.  The computer seems to be working fine except for that.

    It's not supposed to do that, so there is no setting for it.  Be sure you have shut down (powered off) the Mac and started it back up, if you have not since this problem occurred. 
    If you are manually putting it to sleep, make sure you are not "bumping" the mouse immediately after giving the Sleep command.  Also, does this happen when the Mac goes to sleep due to timed inactivity?
    Resetting the PRAM may help
    http://support.apple.com/kb/ht1379
    It may also help to reset "power management," which is called PMU, SMU, SMC, and other things depending on Mac model.  The reset procedure depends on iMac model.  If you can post back with the specific iMac model, I can link to the correct procedure.  This is a list of all iMac models
    http://www.everymac.com/systems/apple/imac/index-imac.html
    A faulty USB device can cause this behavior.  You can try disconnecting all USB devices including hubs, except for standard mouse and keyboard (if used).  See if the problem recurs.

  • Turning imac display off without putting it to sleep questions?

    I like to leave my iMac on overnight but I don't want to put it to sleep COMPLETELY. Just to turn off the display. I heard you press control-shift-eject or do a hot spot on screensaver on system pref. But my question is, would it hurt the iMac in the long run for leaving it on overnight so much or it's made to last like that?
    I talked to an apple specialist at the local apple store and he said these aluminum imacs are made to last even if you keep them on overnight? But would it overheat over the years? or I shouldn't worry so much. Sorry this is my first iMac. I have so many questions about it.

    So it will not overheat no matter what?
    If you are playing some 3D action game, or having the computer encode video for one hour straight, it may start to heat up. But then, the fans should kick up to a faster speed (you'll actually hear them), to keep the temp within the acceptable range. If the iMac is just sitting there, waiting for you to do something, it will not overheat. Now... If there is dust blocking airflow, or the Mac has some hardware issue that prevents the fans from running properly, then it is possible for a Mac to overheat, which may cause it to shut down unexpectedly or give you something called a +kernel panic+ (which is basically a system-level crash).
    When a computer is running, for most users, it spends most of its time waiting for you to do something. If you are doing something simple like writing an email or web browsing, 90% of the time, it is waiting for you to do the next thing. If you have it doing something like ripping a music CD, during that time, it is working hard to finish as quickly as possible. But since most people do not rip CDs all day, most of the time, the Mac is coasting along, not working very hard. So, there is not much stress on the hardware most of the time it is turned on.
    But if you shut down every night and start up every morning, one stressful time for the hardware is at startup. This is because all the components, such as the hard drive spinning up, display turning on, and the rest of the Mac are being powered up, happens at the same time. Waking from sleep is a similar process, and although it is not as bad as a full startup, it may happen much more frequently if the user is sleeping the Mac and waking it up frequently. That's why I suggested using sleep at the end of the day, to save power compared to keeping it ON, but once you have the Mac running at the start of the day, don't have it sleeping and waking numerous times throughout the day; just let it run until you are done for the day, then use sleep until the next day.

  • IMac wakes on its own after putting it to sleep

    Just got my iMac back from the shop with a new hard drive put in. After setting it up, it seems to wake from sleep on its own after a few minutes. Only change since before sending it in to be fixed (when i had no issues with sleep) is that I now have it set up to access the internet thru a wireless router. Could that cause the waking up? should i try turning Airport off before sleeping to see if that works?
    Thanks

    I'm kind of out of ideas, for now.
    Have you tried to repair permissions/disk? I'm not exactly sure how your system is set up, but your wireless internet shouldn't be to blame [in theory]. When you put your iMac to sleep, it should be turning off the AirPort card [along with various other components]. It would be a possibility that if you had your mac hooked in by ethernet and you had something like "Wake on ethernet ring" checked in System Prefs. [that your mac could randomly wake up].
    I almost wonder if it's a firmware problem. Or maybe a problem with a Mac OS X update, I'm also contemplating that it could help to download a combined updater and try to install.
    Hmmmm....
    I'll think on it. I know there's some idea that I'm missing here which could help, but I just can't get it to come to mind.
    -Ben

  • Put iMac to sleep wakes up when wireless device switched off

    Brand new iMac - click to put it to sleep but when switching off wireless keyboard/mouse it wakes up again to tell me it's searching for the mouse.

    in my experience, if i switch off my wireless keyboard first, then make my mini go to sleep, it will not wake during the night.
    JGG

  • HT5549 trouble putting iMac to sleep after installing this update?

    I can't put my imac to sleep anymore after installing the security update for Java. Is anyone else having this problem?
    Fran

    I had the download file open all the time and closing that has solved (looks like) the problem.  However, this was not an issue while I use the regular mouse.

  • Put imac to Sleep or Shut Down

    What's up guys
    I'm just wondering, I use Logic pro
    a lot and I would like have quick
    access when I have a creative urge.
    How often should I shut down my imac
    as apposed to putting it to sleep?

    Several schools of thought:
    1) never shut it off (but it's OK to let the display sleep, i.e., go to screen saver, but never let the computer or the hard drives go to sleep)
    2) turn it on and off as needed
    3) put the computer to sleep (including display and hard drives) when not being used
    Considerations:
    1) "always on" --- if having immediate access to your computer to get down creative ideas ASAP is important then there should be no other factors to consider.
    2) "on/off as needed" -- the exact opposite of #1
    3) "sleep" -- a happy medium? It depends... Waking a computer from sleep still means that you have to wait a while before you can start to record. You should experiment with your system to see how successfully it wakes up after being put to sleep before committing to this practice. Sometimes a system won't wake up from sleep and you'll have to re-boot anyway.

  • Put iMac to Sleep, Warm in the AM

    Before I go to bed each night, I manually put my iMac to Sleep from the Apple menu. Within a few seconds it shuts down and makes no noise (no fans).
    Most mornings however, when I awake, I can hear the fans spinning (primarily the hard disk fan using Activity Monitor), and the top of the computer is warm. When these fans come on I cannot tell, but I'm pretty sure the computer doesn't light/wake up, show the desktop on both monitors, and then go back to screen saving mode and then eventually the screens go dark but the fans still run and the computer stays warm (e.g. not sleeping, just the displays are black).
    How do I put the computer to sleep at night, so NOTHING runs (no fans) and the computer is cold in the morning?
    Thanks.

    Nothings happening, tried the mouse, tried the keyboard, nothing. I followed the instructions for resetting the SMC and the only thing I get is the light sound I describbed in my earlier message. The more i listen I don't think it's the cd drive, I feel like that would be a little louder than the sound I hear. What I'm hearing sounds like a light spinning sound almost like the hard drive when yo click the keyboard to wake it up, except it keeps doing it over and over again until I unplug the mac. When I plug it back in, it will not make the sound until I press the power button on the back.

  • Leave it on - or off - or put her to sleep?

    Quick Q thats common im sure but couldnt find answer.
    I just got a new imac 20". I want to know when I got to work for 10 hours if I should shut it down or put it to sleep?
    Basically my rountine is:
    -Check email for 10mins and go to work. I am aware from my computer for about 10 hours.
    -I come back and go on computer for about 2 hours
    -I go to sleep for 8 hours and do it all over
    Should I be putting her to sleep all the time? I wont to do whats best for the computer
    Thanks!

    If I'm going to use my Mac within the next hour, I put it to sleep.
    If I'm not going to use it for an hour or more, I shut it down.
    In my opinion, this "they're not designed to be shut down" school of thought is way over-emphasised. I've followed the above routine ever since I've used a Mac - that's 15 years now - and I've NEVER had a problem with any of those that I've used (I started with an SE and have used every generation of Mac since).
    For all those people that never shut their computers down - have you ever thought how many thousands of megawatts of electricity are simply wasted by all those thousands of Macs that are never shut down?
    It's estimated that the amount of power wasted in the UK alone by TVs and video/DVD recorders left on 'standby' could power a small city for a year. Yes, Sleep is a reduced power mode, but it isn't a NO power mode.
    In my experience, shutting a Mac down when it's not going to be used within the next hour does it no harm whatsoever. And is it really so, so painful to wait a few seconds for it to boot up?
    By the way, I run my own business and I use my Mac to run that business, so the "Well that's OK for home users, business users need to keep them on 24/7" argument doesn't wash either!

  • Can my USB Drive be configured to power off when the iMac is powered off?

    I am using a Lacie 500GB external USB drive. The drive remains powered on when my iMac is powered off. Is there any way to have the drive automatically power off?

    Hello Jack
    The s.o.p. for shutdown should be to eject the drive, turn it off then shutdown the iMac. The s.o.p for startup should be to startup the iMac then turn on the external HD. Many external HD manufactures do support a sleep function that allows the drive to sleep when the iMac is sleeping.
    Dennis

Maybe you are looking for

  • Receiver JDBC  ERROR

    While I am Practicing Sameer Shadab Blog File to Jdbc ( XML file to MS- Access mdb file ) Connecting to MS Access using receiver JDBC Adapter (Without DSN) I am getting following Error.. JDBC adapter receiver channel cc_jdbc_receiver not initialized.

  • Reg:customizing of IW38

    Hi , i have copied the program of IW38 RIAUFK20 to ZRIAUFK20 after executing ZRIAUFK20 in the selction screen dropdown for all selections is missing . the output screens of RIAUFK20 and ZRIAUFK20 is loking smilar  but while executing through T-code i

  • File.deleteOnExit Bug?

    Here is my code,                             cache = new File("C:\\.cache");                             cache.createNewFile();                             cache.deleteOnExit();When the VM terminates, the file stays there. I can delete the file using

  • Sequencing winzip 17.0 with app-v 5.0?

    Hi, I tried to sequence winzip 17.0 with app-v 5.0 on windows 7 x64, on client test the error message appears: ...."Unable to install over the MSI version of the installation. Please obtain the MSI version or uninstall WinZIP first".I tried to set va

  • Oci8 as a internal driver for Oracle

    Hello, Is there a way I can use a Java class that uses the oci8 driver inside the database?. I use the loadjava and once I run the stored procedure "mapped" to the java method, it says "no suitable driver", it seems oci8 is not used inside Oracle, I