Power off/on SIM switches wont work on Nokia 6310i

Just got a power off/on dual SIM switch for my 6310i off e-bay. Its a slim frame which goes between battery and phone.
I've been running a similar triple switch for a while - but its a physical switch inside where battery needs to be removed to change sims + the switch is getting a bit iffy after a year of use.
The vendor says his product is suitable for 6210 and 6310i. I have an old 6210 and sure enough, it works fine on that - but it won't toggle on power off/on on the 6310i. Any ideas?
TIA.

When you plug it in to iTunes does it show up under devices? Try restoring it. That's the best thing you can do if you're out of warrenty

Similar Messages

When i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warren

when i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warrenty

When you plug it in to iTunes does it show up under devices? Try restoring it. That's the best thing you can do if you're out of warrenty

I can listen to music but my silent switch wont work my phone wont vibrate but will ring, and the volume buttons wont work on my iPhone 4

i can listen to music but my silent switch wont work my phone wont vibrate but will ring, and the volume buttons wont work the speaker will work asweell

Have you done a restore of the phone to see if that fixed the problem with the speaker? If that doesnt help then you probably damaged something inside the phone when you dropped it.
If you're annoyed by the problem, you can always get a replacement phone
Out-of-warranty* cost:
iPhone 5s, iPhone 5c, iPhone 5: $269
iPhone 4s: $199
iPhone 4, iPhone 3GS, iPhone 3G, Original iPhone: $149

My ipod touch (4th) suddenly wont connect to my wifi. Other gadgets are connected though. I tried resetting the network and turning the wifi (and ipod) on and off but it still wont work. Any suggestions on what to do?

My ipod touch (4th) suddenly wont connect to my wifi. It connected fine before and all of my other electronics (tablets, computers, laptops, gaming systems, etc.) are connected and working completely fine. I tried turning the wifi setting on my ipod on/off as well as the actual ipod itself. I also tried resetting the network settings but neither of these options worked. Any suggestions on what I should do?

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hard-Power off caused BIOS to stop working (NOT because of BIOS Flash)

I was trying to boot up a live CD on my Toshiba Satellite P305D-S8900. The F12 key to pull up the boot menu didn't work, and it started to boot to Windows. I let it get past the "Starting Windows" Orab (running Windows 7), and hard-powered it off when it got to "Please Wait..." right before the login screen. After that, when ever I turn it on, the BIOS isn't loading. The Only LED lights going on are the Power button one, and the three that indicates it plugged in, the power is on, and the Battery indicator. The media buttons and the one above the trackpad doesn't work. The track pad one lights up when I hit the power button to turn it off. The fans are working (indicating the power management is working), the CD Drive is reading to see if there is a disc in there, and the screen remains black. There is no hard drive activity whatsoever. And the strangest thing of all...no beep code!!
I have so far tried taking out my MAIN battery for 24 hours (NOT the CMOS battery) and a Pheniox Crisis Disk with these combinations: "Win+B", "Fn+B", and "Fn+F". There is no beep codes when I do it or even any beeping to indicate the BIOS is getting flashed for that matter. Are there any other key combinations I could try? And yes, I from the start took out the battery, plugged in the drive, and pressed and held the key combinations while plugging in the AC, turning it on, and waiting about 30 seconds to release the key combinations. Like I said, this was not during any BIOS flashing, and what went wrong really stumps me.
Is there any other solution I could try? As of right now, sending into repair is not an option. Can anyone help me fix this? Thanks in advanced!

I was trying to boot up a live CD on my Toshiba Satellite P305D-S8900. The F12 key to pull up the boot menu didn't work, and it started to boot to Windows. I let it get past the "Starting Windows" Orab (running Windows 7), and hard-powered it off when it got to "Please Wait..." right before the login screen. After that, when ever I turn it on, the BIOS isn't loading. The Only LED lights going on are the Power button one, and the three that indicates it plugged in, the power is on, and the Battery indicator. The media buttons and the one above the trackpad doesn't work. The track pad one lights up when I hit the power button to turn it off. The fans are working (indicating the power management is working), the CD Drive is reading to see if there is a disc in there, and the screen remains black. There is no hard drive activity whatsoever. And the strangest thing of all...no beep code!!
I have so far tried taking out my MAIN battery for 24 hours (NOT the CMOS battery) and a Pheniox Crisis Disk with these combinations: "Win+B", "Fn+B", and "Fn+F". There is no beep codes when I do it or even any beeping to indicate the BIOS is getting flashed for that matter. Are there any other key combinations I could try? And yes, I from the start took out the battery, plugged in the drive, and pressed and held the key combinations while plugging in the AC, turning it on, and waiting about 30 seconds to release the key combinations. Like I said, this was not during any BIOS flashing, and what went wrong really stumps me.
Is there any other solution I could try? As of right now, sending into repair is not an option. Can anyone help me fix this? Thanks in advanced!

Leopard hangs - have to power off - force quit doesn't work

On several occasions Leopard has hung - try to run activity monitor to kill problem app - I get the bouncing icon but nothing else. force quit does not work on it. Can't log off - can put to sleep, but resumes in same hung state. Once I hard power off and restart, a I get a series of beeps, not just one and a normal start - no error messages. Other programs also would not respond to force quit including parallels desktop.

Hi,
Have had same problem here. My iMac is only a few days old, and barely anything on it before the upgrade from tiger to leopard.
Tried lauching thunderbird tonight, and the app just sat on the dock bouncing for a while, but the application never actually seemed to launch.
Tried force quit, but didn't have any effect. Also could not log-off, or shut down, as it said the application wasn't responding. This does seem very windoze-like!

My apps wont open, i already tried turning the power off but still they wont open :(

I really dont know what happened that all of my apps just wont open. I tried turning the power off but they were still crashing. Help please!!

Try to reset the device by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, set it up as new device: How to back up your data and set up as a new device

Hold Switch wont work

my ipod mini's hold switch dont work, when ever i switch it on, i can still skip track, change volume, well everything basicly. anyone have any suggestions to the problem?

Hello,
Try to do a Reset before you plug your iPod with the Wall Charger. If it does not work, I am afraid you may need a battery replacement. You can have a replacement from apple shop or a 3rd party supplier (DIY)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html

My iPad will not power off. Buttons won't work

My iPad will not power off. Buttons won't work

Hi Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo Try this with ipad conected to charger. Cheers Brian

My power button on my iphone wont work

Three days ago I was in the car coming home from camp and my power button began to not work well. I would have to press it a lot harder then i usually would. So i just stopped using it in general, to see if it would start working again. I tried to use it today and it had stopped working completely, I dont know what to do!! I'd like it to work:/

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W

Files are off line now encoder wont work

I have been working on a slideshow in Premiere pro CS4 saved all my files went over to After effects for a day came back to Premiere and all of my files were off line I tried to reconnect them and it said files are to big (Something like that) so I deleted all of my projects and started over now Ive tried to export one simple photo for a slide show and does not show up in the adobe media encoder.Im not doing anything crazy here.Oh the pain
Any help is appreciated.

OK, after you Scale your image, do a Render. Remember, previewing in the Program Monitor is just an emulation. To view for critical grading, a calibrated CRT TV monitor will be better. However, you can set your Program Monitor to display 100% (not Fit), and Display Quality to Highest.
Also be aware that the scaling algorithms in PrPro are not as good as those in Photoshop and offer far less control over the scaling. I do all of my resizing in PS, prior to Import into PrPro, and establish the exact size that I will need, usually the exact Frame Size as my Project, or calculated to the exact size that I will need, if I must pan on a zoomed out image. This ARTICLE will give you some tips on resizing in PS.
Hope that this helps on the quality issue, and good luck,
Hunt

My dad made a mistake on purches on my ipad, and now he owes money he can't pay off right now. icloud wont work because o it, how can I get my icloud to work so i dont have to wait for him to pay itunes off???

(we share a apple id) My dad bought some inapp purchases, and he thought it didnt work. so he did it again. he can't pay it of right now, and icloud reuses to work on my new ipod. i cant just make a new id, all my music is on that. how can i get icloud to work, WITHOUT waiting for my dad?

iCloud is free.

Cant unlock ipod, calibration off, reset and still wont work?

the slide goes almost all the way then falls back. cant unlock. The one time it did unlock nothing on the right side worked

- Nexy would be to restore from backup
- Then restore to factorydefault/new iPod and set up as new device.
How to set up your iPhone or iPod touch as a new device
- Last, make an appointment at the Genius Bar of an Apple store since you likely have a hardware peroblem.

My IPad froze so I turned it off and now it wont work at all!

Okay so pretty much the screen went dim out of no where and froze so I hit the sleep/wake button and home button and reset the IPad. But here's the thing, it won't turn on now. The IPad was at about 75% battery which is why I am so confused. If anyone has anything that could help me please let me know.

Good day vortexofpandas,
If you are having an issue with your iPad not starting up, you may want to troubleshoot using the steps in this article -
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
In particular the section titled If your device gets stuck during startup.
Thanks for using Apple Support Communities.
Safe computing,
Brett L

Ive had my iphone 4s since 10th april and on three seperate occassions its switched itself off completely (whilst having battery) it then wont work for around 2 days, this is very annoying and I dont know what to do as its been out for around 12hours now

I don't know why my phone keeps switching itself off, I've never dropped it, had water damage nor any other damage to it. Ive had it for around 5 months or so now and it just likes to switch itself off for around 30-40 hours then work again as though nothing happened. Although this is great as it will eventually work its very frustrating not knowing if it will switch on again.. at the minute my phone hasnt worked for about 10-12 hours. I went in to the apple shop and they said they couldnt see me for over a week as they were fully booked, I understand that theyre busy but surely they can't expect me to go without a phone/alarm/email for that time when I am paying for it. Does anyone have any help/advice they can offer? Thanks

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Power off/on SIM switches wont work on Nokia 6310i

Similar Messages

Maybe you are looking for