Power Plane Problem: Only one layer as an option.

Dear all,
I try to use Create Power Plane tool as usually, but for some reason bottom layer is already selected and it can not be changed. I am using dual layer board, so there should be also top layer. I can draw traces and everything except the power plane on the top layer.
I have made many dual layer boards without any problems with Power Planes. I can't figure out what I am doing differently from the previous boards.
Any ideas?

Hi,
Try this:
1.  Select Edit>>Selection Filter, disable all filters except for "Enable polygon", the default toolbars should have the filters option so you don't have to go back to the menu.
2.  Select Edit>>Select All to select all copper area and power plane on the work area,
3.  Press Delete,
Now try placing the power plane again.  If this doesn't work, please send me the file, I will see if I can fix it for you.  Create a service request at:
http://sine.ni.com/apps/utf8/niae_asc.main?lang=US
Tien P.
National Instruments

Similar Messages

  • Replace one channel by another on only one layer, leaving the others intact?

    Hello. In a CMYK image, I need to turn on only one layer one channel completely into another, while the others remain intact. The M channel (the M on that layer) contains information, but I can't print M in this place. I want to change it into an equal amount of K (or into C, in the present case, or even into a mixture of the two). I know how to do this to an entire image (change into greyscale, duotone or whatever may apply). But since I need this to apply to only one (or a selection of) layer(s), leaving all others intact, this is not an option here. I'm sure there's a way to achive this, but I can't find it. Any advice would be much appreciated.

    bustamant wrote:
    hello, thanks for your replies. As far as I understand, Channel Mixer (i.e., an Adjustment Layer containing a Channel Mixer applied to the layer in question) allows me to reduce one channel to zero,
    You are completely correct up to here...
    Then choose K as the desired output channel at the top of the palette and slide the M (source) slider to the desired value.  You can choose more output channels by going to each output channel in turn.
    The way it works is slightly confusing at first, but in a nutshell, you choose your output channel first, then mixture of sources.  Then move to another output channel and the sources will be at the default position for THAT output channel only.  Each channel has a set of source channels assigned to it.
    Default;  black output channel = 100% black source, 0% CMY
    So your example is black output = 100% black source plus 100% mag source (although I expect you are going to change black source to 0)
    AND magenta output = 0% Magenta 0% CYK source  (no mag output at all)

  • Applying feathering to only one layer

    Hi,
    I'm created a two-part ad.  One of the two parts (on two different layers) has a background image that I would like only the center to show up and the rest I'd like to whiten (about 90% opacity, leaving 10% of the background image visible) using feathering, as described in Feather Selections In Photoshop With Quick Mask
    So, does anyone know how to apply such feathering on only one layer?
    Thanks!
    -Ron

    Create a Layer Mask and apply Feather in the Properties Panel.
    Could you please post a screenshot with the Layers Panel visible?

  • Make only one layer of a video brighter

    Hi,
    I have few layers of videos, I am trying to make only one layer brighter.
    How can I do that?
    Thanks,

    Hmm, select the layer in the timeline, go to the effects menu, scroll down to color correction, in that menu choose brightness and contrast and adjust the brightness to your liking. It will only be applied to that layer.

  • Why does a my layered Illustrator file open with only one layer, when opened by someone else?

    I am using CS6, as is the other user.  When they open the file in Illustrator all the artwork is on one layer, even though the original file has numerous layers, and opens with these layers when I open it even now.
    I have never come across this problem before in all the years I have used Illustrator and have had no joy when trying to search for this problem.
    Any ideas or help would be greatly appreciated as it is confusing us!
    Thank you.

    Hi Mike, Wade & Larry,
    Thank you so much for your replies.
    Since I posted this issue, I was later informed that the other user is infact opening my files with CS5 and so a quick solution to this was saving it down to a previous version! Sorry for the confusion!
    This problem then becomes clear that it was a version error, but I have always had an error message come up if I try to open something that was created in a newer verion - is this no longer the case?
    I have been assured no pop up messages appear when opening the file which I find odd, and also that this layer compression has only just started happening even though many files have been back and forth previously.
    A little mystery! At least for now it is all working ok again
    Thank you all very much, greatly appreciated.

  • T400s Headset problem: only one female connector for Micro and earphones

    Hi there,
    would need informations concerning the headset jack on the left of the laptop. Whereas in my old X60s have been two connectors for Microphone and stereo earphones (separately), now in the T400s only one connector is left, combining those two functions. As I would like to keep my headset: What kind of connector / adapter has to be used? Is the new jack stereo or mono?
    Who can help me?
    Regards,
    Lutz
    Solved!
    Go to Solution.

    Hi Mats (and all others),
    problem solved here: I have bought a Belkin "Y-adapter" picture here
    Works great with a mono headset (1 x micro and 1 x headphone, both with stereo plug).
    The microphone uses the top of the connector, the headphone uses the second port. Perfect.
    Have fun,
    ineltron GmbH
    if you should need some power semiconductors: www.ineltron.de

  • How can I edit separate layers in a psd file that was saved as only one layer?

    A designer provided me with a finished design and provided the psd, eps and ai files.  I'd like to make some minor changes in PS and would like to access individual layers - e.g. the text, background, etc.  When I open the psd file, however, it only has one layer.  how do I break out the original layers so that I can edit them?

    You can't. Once it's been flattened, you can't unflatten it. Talk to your designer: he/she will most likely have the unflattened version available.

  • Only one layer slow

    in cs6, working in black and white, 800mb file when flat, 3gb with layers.  One layer only is super slow.   it's not the largest layer. it's just a small image fragment.  but when I try smudging in that layer, computer freezes up and start to move super slow.   I tried copy and paste image content into new layer without improvement.   Slowness started happening after I stretched the layer.   I have since opened and closed this document many times. restarted computer.  duplicated layer into new file doesn't improve the matter either. 

    samlarson wrote:
    UPDATE:   when I move this layer outside of the group it's in it moves at normal speed....
    We cross posted there.  I am not sure why being grouped would slow down a layer

  • Are Apple products the only ones that have the option to have a hot spot built into i?

    my husband needs to use a tablet for work. We don't have an Internet provider for it. I thought about using a personal hot spot for it. I have 2 Apple products he doesn't have any. Can you use a personal hotspot for them. I am not familiar with his products at all. Is Apple the only one that offers a hotspot on their products?

    No. Click here and see the third paragraph.
    (120029)

  • Only one layer stops

    I have successfully managed to make play and pause controls which plays and pauses all movieclips and assigned soundchannels. The problem I have is that only the child movieclip which is placed on the top layer stops and plays and the other child movieclips are ignored.
    Here is the code:
    import flash.media.Sound;
    import flash.media.SoundChannel;
    import flash.events.MouseEvent;
    import flash.display.MovieClip;
    pause_btn.visible = true;
    play_btn.visible = false;
    var mySound:Sound = new MyFavSong();
    var myChannel:SoundChannel = new SoundChannel();
    var lastPosition:Number = 0;
    myChannel = mySound.play();
    pause_btn.addEventListener(MouseEvent.CLICK, onClickPause);
    function onClickPause(e:MouseEvent):void{
        lastPosition = myChannel.position;
        myChannel.stop();
        stopMovieClip(container);
        pause_btn.visible = false;
        play_btn.visible = true;
    function stopMovieClip(mc:MovieClip):void{
      mc.stop();
      for (var i:int = 0; i < mc.numChildren; i++)
      var mcChild = mc.getChildAt(i);
         if (mcChild is MovieClip) stopMovieClip(mcChild);
    play_btn.addEventListener(MouseEvent.CLICK, onClickPlay);
    function onClickPlay(e:MouseEvent):void{
        myChannel = mySound.play(lastPosition);
        playMovieClip(container);
        pause_btn.visible = true;
        play_btn.visible = false;
    function playMovieClip(mcPlaying:MovieClip):void{
      mcPlaying.play();
      for (var j:int = 0; j < mcPlaying.numChildren; j++)
      var mcPlay = mcPlaying.getChildAt(j);
         if (mcPlay is MovieClip) playMovieClip(mcPlay);   
    And the .fla: http://www30.zippyshare.com/v/71537447/file.html
    The movieclip named "container" is the parent which contains three different child movieclips (1-10, 10-1, colours) 1-10 is on the top layer and is the only movieclip which plays and pauses the others get ignored but if I swap the order round the others work only if they are on the top layer.
    It's probably easier to check out the .fla than to try to explain it!
    Any help would be appreciated.
    Thanks
    Phil

    First off, your stopMovieClip function is not closed - you're missing the } after the one that closes the for loop.
    Then within that function you are calling stopMovieClip - instead of just calling stop on the clip. It's not a recursive function so that's not going to work.
    I think you want something like this:
    function stopMovieClip(mc:MovieClip):void{
      mc.stop();
      for (var i:int = 0; i < mc.numChildren; i++)
      var mcChild = mc.getChildAt(i);
         if (mcChild is MovieClip){
              mcChild.stop();

  • Colorize only one layer

    I'm using Trapcode Particular to generate an effect on to[ of a video and use a colorize adjustment layer to colorize the effect. Problem is that this also colorizes the video which is below the effect so how can I apply it only to the effect and leave the colors of the video unchanged?
    thanks!

    I can't do that because it won't change the color. Only works with an adjustment layer. Pre-Compose is useless since that removes the whole effect all together. So what now??
    I really don't know what you are talking about. Applying an adjustment layer effectively treats the output from Particular as a 2D layer, which is no different what happens under normal circumstances if you apply the effect directly - to the result buffer of the previous effect/ operation. You are trying to see distinction where there is none. Some effects ignore Alpha and such, but that's a whole different matter. If 3D interaction is a concern, you wouldn't use adjustment layers at all as it breaks 3D rendering order, resulting in incorrect overlaps. So by all means, either you are doing something fundamentally wrong or just fail to give us a clear impression of what it actualyl is you are trying to do, so please elaborate, provide a screenshot, link to a reference clip or something like that.
    Mylenium

  • EP-635 problem - only one channel playing

    Ok, here's the deal - on the other day left channel of my EP-635 earphones sudennly stopped working. I wasn't doing anything, it just broke by itself. I touched the cable everywhere to find where's a gap and found out that the problem is inside this little white thing on the cable (when I was pushing the cable around it the music was playing).
    http://img532.imageshack.us/img532/1944/49031843.jpg
    I opened the casing up and found out that cable was originally twisted there - this caused the break of the wire inside and a whole channel. And still, left channel is working only if I push the cable in here. Now, it wasn't my fault, it was producer's fault. But my warranty expired, is there a chance to get new ones from Creative? You know, because they designed it that way and there was no option to broke it by user because cable in that section is inside plastic casing, so they should pay for their faulty hardware.

    Hey @Agneuw
    Thanks for posting in the Spotify Community.
    That doesn't sound right. Which device and version of Spotify are you using here? Has this started happening since a particular update or change on the device?
    Simple, but does a quick restart of the device help out? If not, try a clean reinstall of the app. This should make sure everything is installed correctly.
    Let me know how these checks etc. help.
    Jason.

  • I have tried loads of headphones and on them all i have the same problem only one ear i can get sound out of can this be fixed?

    Has anyone else had this problem?
    My ipod has been working perfectly for years and all of a sudden i have gone through three sets of headphones at least in the last month, i have discovered that it is a problem with where the headphones go......no idea what the name of it is so can anybody please help me dont really want to get a new ipod as this is perfect bar this one thing....thanks

    Try to play it on a iPod Docking station, if it is okay, then you need to clean the iPod earphone jack hole, with paper clip, entwined with wool soaked in a small amount of alcohol.
    Or just blow a jet of compressed air into the hole, if you got those camera kit with a rubber air pump.
    If it is still one sided, on the iPod dock, then, does the same song, play normally on the iTunes?
    Have a nice day!

  • Using adjustment layers to only one layer

    I know how to use an adjustment layer - it goes directly over the layer I'm editing and I'm able to edit the colour (such as hue etc). The trouble is, anything below that adjustment layer then gets affected. Is there any way I am able to make this adjustment layer exclusive to a partuclar layer?
    Ideally then in that sitation I'd be able to have a bitmap layer using a vector mask (for example, a cut out tree) and then using an adjustment layer to change the colour of the tree.
    Hope I've explained it well enough, it's a bit confusing.
    Thanks.

    I'm new to CS5, but find that if I create an adjustment layer from the "Adjustments" window I automatically get the chain link icon in the layers window showing the two layers linked, then the adjustment only affects the layer below.   However, if you use Layer|New Adjustment Layer|Levels (for example) then you have the option to use previous layer as a clipping mask if you tick that box it is linked just to the previous layer, left unchecked it affects all layers below.

  • I cannot get ipod to start, Logo for power is the only one that appears but it will not recharge either by using pC or dock. I have used two different connecting wires but no difference in response

    I cannot get Ipod to start. The only logo that comes up is the power needed but in spite of connecting the ipod to PC and using two different connection leads the ipod does not respond. I also tried to power it using a i station 7 but no difference. I tried all the usual pressing of both menu and play buttons. Is it fixable?

    Thanks for your tip. I tried leaving the ipod in the I -Station  7 overnight and then reconnected it to my PC> It asked if i wanted to reset to factory settings. I did this and then the Apple logo came back on .After that a very sad looking logo of an ipod came on with  www.apple.com/support/ipod underneath. I feel that either burial or cremation is my option now for this old ipod.

Maybe you are looking for