Power stopped mid printing

Hello,
I had been having trouble printing with a wireless connection. I still can not, but hooked up a cord to it. I finally was able to print and hit print. 2 pages out of 10 were printing and then the printer just stopped. Completely stopped...I checked and there was no power. I could not get the computer to power on. I switched outlets at still no power. I can not get the power to come on the printer.
Printer is deskjet 3050
Jackie

You will need to find power for the printer, obviously. If you find power and the printer still does not come on, pull the power cord out of the wall AND the back of the printer for 5 minutes to reset it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Printing on photopaper stops in mid-print, says "paper jam"

Hello!
I've been trying to print photos on photo papers on the HP Officejet 4355 All-in-One printer.
I've tried the HP Premium Plus and HP Advanced photo paper in the Paper Type, and Best print quality settings, colored.
The paper goes in, prints about an inch of the image (in best wuality), but then the printer will stop and the printer would display an error message "Paper Jam."
I pushed the "Cancel" button, and the printer expelled the paper with no problems (except that i now have a semi-printed photo on my photopaper) and cancelled the print job on the WinXP Printer job dialog box.
I've only placed one paper in the paper tray, so multiple paper in the rollers is not a problem.
I've checked all the rollers. I've aligned and cleaned the cartridges. I have no problem printing on normal (substance 20-24GSM) paper.
I've also tried printing on cards (around 40-80GSM) but the same problem would occur -- paper would go in, will print an inch, stops then printer says paper jam.
How do get the printer to print completely on the photopaper or on any cards?
I've checked the user's manual, so far i have not read any troubleshooting solutions for this problem. Apologies for my long post. I hope you can give me some suggestions.
Thank you very much in advance!
Warm regards,
Jade

Hello there! Welcome to the forums @IdahoElk
I read your post about the printer issues you're having with your Officejet 100 Mobile printer. I have a couple of suggestions that may help you.
First of all, power reset the printer and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 30 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Also, check out this troubleshooting document. Check the issues to see if you can find the description to what you are seeing on your printer.
Blinking Lights on the HP 100 Officejet Mobile Printers
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP officejet 100 Mobile Printer Stops in Mid Print

This printer worked fine (NO problems with Bluetooth even) for the first couple of months and several changes in print cartridges. For the last year, every time I print a document, it will either stop printing on the second or third document or stop in the middle of the first document, and all the indicator lights come on telling me I need to clean cartridges, etc. Every time is different. Some times it is one indicator error light, the next print job may trigger all the lights. Every print job I execute and it fails, I have to remove the battery, re-insert the battery and print again. It works every time after I reprint the job after removing the battery. The next document triggers errors again and it will not print. I do not have a warranty, but I am ready to throw it in the garbage! What can I do? I am running on a Mac Osx system. Please help. Thank you!

Hello there! Welcome to the forums @IdahoElk
I read your post about the printer issues you're having with your Officejet 100 Mobile printer. I have a couple of suggestions that may help you.
First of all, power reset the printer and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 30 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Also, check out this troubleshooting document. Check the issues to see if you can find the description to what you are seeing on your printer.
Blinking Lights on the HP 100 Officejet Mobile Printers
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer stops mid-page

I have my printer (a Canon ip5200) connected to an old Airport station that is the secondary station to my main AEBS (WDS).
Since upgrading to Leopard, my printer often starts printing a page, but then stops in the middle of the print job. I have to stop the print queue, the half finished print comes out.
Any ideas?

Hi RussellJF, Welcome to the HP Forums, I hope you enjoy your experience! I understand the printer is stopping in the middle of a print job and you are getting smudged black lines across the page.I will be happy to help you. I have provided a document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems. This document provides steps for cleaning the cartridge contacts.'Ink Cartridge Problem' Message Displays on the Product Control Panel. Here is some information for manually cleaning the printhead.'Printhead Problem' or 'Printhead Appears to be Missing or Damaged' Message Displays on the Control Panel Display. Hope this helps.
Thank you for posting on the HP Forums.
Have a nice day!

Airplay STOPS after printing on G Express

I just installed a Samsung ML-2010 to a G based Airport Express in WDS bridge mode. For some reason, the native ML-2010 print drivers do not work, but the ML-1630 driver does work. If I am playing audio through the Airport Express and decide to print, once the print data reaches the express, the audio stops and does not return until I either power cycle the Express or go into Airport Utility and disable Airplay, wait for a reboot, then re enable Airplay, and wait another reboot. If I print from a Windows PC using the ML-1630 driver through Bonjour, the audio does NOT stop when printing, only on the Mac (iBook G4 10.5.8) is it failing. I tried 2 Airport Express units and both fail the same.
I can only think it is the Mac print driver, but wanted to see if anyone else had a similar experience.
Thanks in advance

Hi dmule, I just replied to another topic here about this, I know you were involved in it but just in case you don't get notified I thought I should cross-link it here.
Cheers
Ollie

Lightroom 4.2 stopped mid way through tethering with Canon 1DX. any suggestions?

Lightroom 4.2 stopped mid way through tethering with Canon 1DX. Top left corner bar read still transferring, but all images had already been viewed in preview of tether and i had given it an etxra 15 minutes to contine transferring until I rebooted everything. I restarted several times while client waited, but LR would no longer accept tethered images any longer. Any suggestions?

Well, the EOS Utility was incompatable with OSX for quite awhile and once LR appeared to support tethering, I migrated away from it. Until yesterday.
The workflow is still wonky, if you want to use LR for display/printing (which I do), but it's doable.
There are tutorials online, I remember finding them (sorry no links) years ago.
The main bugaboo is creating the appropriate folders in the right order. Both LR and EOS Utility are really picky about those folders (have to be empty, both apps picky about that, so you'll probably have to manually empty after firing off a couple of test images).
I always forget how I did it, but last night's kind of fresh in my mind — I think the order that worked for me was:
create a destination folder in EOS Utility
in LR's auto-import settings, choose the step #1 folder as the watched folder (you've got to do this before putting a single thing in that folder, which will likely mean manually tossing some test images, because if you don't LR will ***** at you that the folder must be empty.)
below that in the same window, create a Destination folder. (don't know why this is necessary, but it is)
Finally, I suggest doing all this in one parent folder and creating a shortcut to that folder somewhere very convenient so that you want drive yourself crazy in the inevitable opening, closing and reopening of these folders, trying to troubleshoot. :-)

Scanner stops mid scan and troubleshooting says user cancelled

Scanner stops mid scan and freezes. Troubleshooting program says "user cancelled" during test, but I didn't touch system. All connections fine. uninstalled and reinstalled drivers. Restarted printer multiple times. Help!
This question was solved.
View Solution.

Both copy and paint worked. I'll use paint from now on. Cheers!
Alan Irvine

How do i delete a podcast stopped mid-downloading in iTunes, iPad2?

I am downloading several podcasts and one is hung up/stopped mid-way. I want to delete it. Pausing and resuming does not function. Thanks

You and me both!
I started out with an Apple+ way back when. We came back from Christmas vacation to a faculty meeting where an AEA (Area Education Agency) employee was to introduce us to this new BIG DEAL - computers!
Afterward, the math/science people the superintendent expected to get so excited took a walk while his ENGLISH department learned to type 10 HELLO, etc. until you got a document window open and could enter text, AND CORRECT IT, causing it to print out WITHOUT mistakes. My typing skills were non-existent, so I went to the elementary teachers and borrowed a program they used to introduce students in second grade to the keyboard. (I was a jr./sr. high school teacher, and nobody could figure out why I'd never been taught to type.
Sigh.
I SURE HOPE THEY GET OVER THIS MESS IN A HURRY! I want to go back to i-Tunes 10+ whatever I was at, but Lion won't let me dump i-Tunes, as it is part of the OS. BUMMER!
Most of all I hate the sneaky way they introduced this, just like it was a regular upgrade, not something that would ruin our work methods of many year's standing and giving us NOTHING to replace it with short of scrolling down through 1700+ podcasts. UCK!

Hp j4680 all-in-one printer stops before printing is completed

Ever since windows 8.1 downloaded to my computer I've lost my scanner and have problems printing. It stops before printing is completed and now it won't print at all. I've tried going to H.P. to help but it now says that no printer is found. What can I do?

Hi,
First follow this tool by selecting fix printing:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-141412-1&cc=us&dlc=en&lc=en...
Be sure to clarify how the printer is connected to your PC, what HP software has been installed and what security program have been installed.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew o

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?

Is the Poster Print feature turned ON?

TS1470 Downloaded songs stop mid-song in iTunes music library and on iPod.

I received the 'secure network connection could not be established' error message several times during a recent audio download. I was able to eventually complete all of the downloads by going to the 'available downloads' area. However, when I played back the downloaded songs, several of them ended mid-song although the complete songs appear to have successfully downloaded judging by the 'Time' (minutes) count for each song. (Interestingly enough, the majority of the songs that stopped mid-song during playback were marked as having high popularity in the iTunes store.)
I've had this issue with previous downloads too. I've been charged for and have paid for these songs, but didn't receive the full product in some cases. It's very frustrating that I'm not able to enjoy these songs in their entirety.
Have other folks had this issue? What is the resolution?

Something may have gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem.
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
tt2

Stop re printing of delivery note

Hi All,
My requirement is to stop re printing of delivery note after it is processed once and printed.
The NAST-STAT field is not changing to any value except 0. i am not able to figure out what change it requires. guidance needed.
thanx.

Hi,
I presume that you have configured output type to print, if so in the FORM ENTRY you will have to update the return code as 0 if print was successful.
Now, NAST-VSTAT will be updated to three possible values.
0     Not processed - The entry will remain in this state until the form is printed.
1     Successfully processed - It will be updated to "1", once the form is printed successfully, it will not be set to "1" if you just do a print preview.
2     Incorrectly processed
Regards,
Chen

HT4356 How do I stop a printing of multiple pics on my ipad

How do I stop a printing of multiple pics on my ipad

Double click the home button. Select Print Center. Find the job and cancel it.
This assumes you have an AirPrint printer.

Stopping Crystal Printing Too Many Records

I have a report in crystal. It is showing some details held on our Case Management System. If people merge in the template twice they end up with a set of 8 blank details in their case. This in turn forces Crystal to print many rows for each of these cases as it prints ever possible combination of answers for each detail. As a result I had 540,000 records instead of 1 this morning.
Does anyone know if there is anyway to stop this happening, an option to stop Crystal printing more than say 100,000 records?
Thanks,
Alastair

Use the Record count in the record selection forumla or use a stored procedure.

Reports 6 - how to "stop" the printer

hello... please any tip will be helpful...
I need to send reports (from win98, Oracle 8i/netware) one after other, about 15 reports...
many of them print at maximum 10 lines... but then the printer pushes paper until the end of the page...
ex: If the paper size is 11 inches, it prints some lines (2 in.) and pushes the rest of the paper... 9 blank in. of paper...
after all my reports uses lots and lots of paper...
I need to print the next report just after the other...
is there any way to stop the printer after the report is complete or something else i can do??
I use continuous form paper on a matricial printer (ex. LX-300).
Thanks a lot,
Paulo

hello,
the problem here is, that oracle reports is page-based. that means when it produces the report output is always created by page.
you can try modifying the page-height and the margin area to limit the amount of white-space.
regards,
the oracle reports team

Power stopped mid printing

Similar Messages

Maybe you are looking for