PPM with incorrect setup group information

Hello all,
We have a problem with information of setup group updated in PPM.
At the first time, the user has created the routing with the incorrect information in ECC, but when he has corrected it, the CIF PPM interface was not able to correct it in APO.
Even when we try correct manually using transaction /SAPAPO/SCC03, we are not able to fix the information. Always, the old value of setup group is considered.
Can you help us?
Thanks in advance.
Januario Faria

Hello all,
We were able to solve the problem.
We had two setup groups with the same SETUP_ID in table /SAPAPO/SET_ID.
In order to solve the problem we had to follow the steps:
1.     Delete production and planned orders of related products;
2.     Delete products' PPMs;
3.     Delete setup groups from setup matrix;
4.     Delete setup group;
5.     Reactivate setup group integration model;
6.     Reactivate PPM integration model.
Regards,
Januario Faria.

Similar Messages

Systemd very nasty with incorrect setup

There was an error in my fstab. An entry for a partition that was not there anymore. But this partition wasn't essential. But instead of giving me a warning, it began by waiting for 90s until ask me "Give root password for maintenance or Press Crtl-D to continue). I pressed Ctrl-D but the machine hung. After pressing random key nervously, I see once again the 90s countdown. At this point, I forcedly reset the machine and booted a rescue disk. Is it not possible to configure systemd to be a little more tolerant. it might have waited for 10 sec, gave me a warning and booted anyway. The only thing to do was to remove the entry for the non existent partition in /etc/fstab.

No, it's nofail. From my fstab:
/dev/vg0/v_build /home/testing/build ext4 defaults,stripe=512,data=ordered,nofail 0 2

HT1918 I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?

I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?

Yes, it's frustrating.
I don't have my iPod with me but, as I recall, the change is done in Settings/Store. That change will apply to NEW purchases. However, be aware that all purchases are permanently associated with the Apple ID that was originally used. Generally, it's only a problem when you need to update an app. IF you do your updating from iTunes and your logged in to the "wrong" ID, you'll need to log out and back in again. It's easier from the iPod as you do not need to log out/in but you do need to know the password.
Unfortunately, you can not merge IDs nor can you transfer purchases from one ID to another. Go here to find out exactly what you have. I have the same problem so I deliberately made both passwords identical to make things slightly easier for me.

Setup group and setup matrix

Hi Gurus,
Please brief me on the significance of setup group and setup matrix in APO and the effect of the same in planning?
Thanks,
Prasanth

Hi Prashanth,
Setup group tries to group products with similar characteristics.
Setup matrix provides the sequence in which the set up groups
can be executed.
Setup sceanrio is used in cases where in the time taken for switching
over from one product or group of products or category of products or
charactersitics of products which is called as predecessor to another
product or group of products or category of products or characteritiss of
products which is called as successor.
Say for eg, if you are having a scenario wherein
you need to manufacture products with low weight,
medium weight and heavy weight products.
You can define in the set up matrix that for switch
over from low weight to medium weight products for
manufacturing, the set up time involved in 2 hours and
the setup cost involved is Rs.100,
Similarly, for switching over from heavy weight products
to medium weight products, the set up time involved
is 3 hours and the set up cost involved is Rs.50.
Based on this information, system will frame a matrix
of information and use during planning.
Hope this information is clear to you.
Please confirm whether your issue is resolved.
Regards
R. Senthil Mareeswaran.

Period Incorrect Setup

Hi Experts.
Our client is running SBO 2007A SP00 PL45.
Their financial year runs from 1st January to 31st December.
They have incorrectly setup 2010 as a single period instead of 12 calendar months.
They have entered transactions into this period and so it can't be deleted and setup again correctly.
Is there any way we can dig ourselves out of this hole?
Your thoughts would be appreciated.
Kind regards,
Julie Coppins

Hi Julie
Once they have posted, you are in a bit of a hole! There are some articles on this subject on the wiki
I have just re-built a database as the customer changed their FY but alrady had postings. We restored a backup, deleted the incorrect periods, re-added the new FY and then imported all of the transactions again...
You have some options, they are listed below: Good Luck
Peter (let me knwo if I can assist further)
It frequently occurs that posting periods are defined, postings have been made & then a decision is taken to change the posting periods from, e.g. months to year. SAP Business One does not allow the change of posting periods as soon as there has been a journal transaction. There are 2 options to correct the posting periods. It will depend on the circumstances & the number of transactions which method is the most suitable.
Option 1 (preferred solution):
Roll back to the last backup of the database before the first posting was created using the new period:
1.     Identify all delta data that has been added to the database since the first posting has been made in the period to be corrected.
2.     Export this data by either using the 'Export to Excel' functionality or export from a 'select' SQL query.
3.     Reinstate the backup & create the correct posting period, backup the database.
4.     Import all delta data.
Using this method, the integrity of the database & the appropriate sequence of posting periods is retained. All reporting can be done according to the correct periods.
Option 2 (technical alternative, use only if Option 1 is not possible):
Example 1:
The Posting period is defined as 'Months' when it should have been 'Year'. There have been postings in the periods. In this example, the first 4 months have postings. The current setting is as follows:
All periods that do not have postings yet can be deleted:
1.     Administration -> General Settings -> Posting Periods -> open the period
2.     Rightclick in the 'Posting Period' window & select 'Remove'
Once only periods are left that have postings, perform a complete period end closing including all reporting. Backup the database.
Create a new posting period as follows (Caution: Check if your customer uses period indicators & adapt appropriately):
Ascertain that the 'To'-posting date is correct.
The new fiscal year starts at the first day of the new period. Any subsequently defined period will start at 01.01.2009.
Example 2:
The posting periods should be set per month & have erroneously been defined as per year.
Restrict the current posting date range to the next logical date, e.g. with a current date of 21.04.2008, the last posting date for the current period should be set to 30.04.2008, such that the next period starts on 01.05.2008.
Create a new period as follows (Caution: Check whether your customer uses period indicators & act accordingly):
As sub-periods choose 'Months' & then set the number of periods to '8' (May, Jun, Jul, Aug, Sep, Oct, Nov, Dec). Click on 'Update'.
SAP Business One will then automatically create the required periods. On the last day of the current period take a backup of the database.
Once all transactions have been entered into the 'old' period, perform a complete period closing, including all required reporting.

How to get the user and groups information from http header

Hi All,
In my current scneario, we are using Siteminder for SSO setup.. And in this process, after authentication and authorization, they are going to append the user information and group information of the user into a HTTP header and it will be sent back to our presentation services.. We have to extract the user information and group information from the http header.
My HTTP header will look like as follows..
SM_USER XYZ
SM_USERDN CN=Firstname\, Lastname\, xyz, OU=GPO-Low Level Security,OU=Domain Users,OU=BU FDT,
SM_USERGROUPS CN=GG-CA-SiteminderAdmins, OU=Global,OU=Domain Groups, DC=com^CN=GG-ServiceDeskAdmin-TCCORPCEFS
And also if anyone explain me the overall working of SSO in detail like how presentation services will make a connection to BI server( I guess using Impersonator User), and also how our BI server will read the URL from presentation services and the over all working flow in our OBIEE..
Thanks a lot....

Please use the search! this topic has come up lots of times already.

How to Include JRE with our Setup Package

please help me,
i have created one swing application.i successfully created setup.exe using installsheild 11.It is working in my machine.when i run this in another machine .it is not working.iam using some external jar also in the appln.i put that jars into the jre/lib/ext in destination machine's directory then it works.
i want to include JRE with my setup package(first the setup should find whether the jre is installed or not ,if not it must insall JRE and put my external jar files into jre/lib/ext directory in destination machine then only my appln should insall).please give me a solution for this

What?!! It isn't considered legal to access a
root-level class from a higher level package?Well it's not now because your code won't compile, but
prior to 1.4 you could. I think the JLS has been
updated to say you can't import from the unnamed
namespace.Hmm! I must have missed that bit (not that I read it in any great detail, anyway!). I suppose it forces you to use packages, which is a good thing, IMHO.
What I was wondering about was, is the directory structure of classes strictly necessary, given that a class contains information on its package anyway? I know some IDEs don't require the source files to be in the right directory - they will check on the package statement, and locate the class file accordingly - but is it absolutely necessary for class files to be located according to their directory structure? I know the JLS says they have to be, but could the JLS be relaxed on this point, without breaking anything?
RObin

Do the purchase order can be created with several purchasing groups?

Hello gúrus,
I need your help again a.s.a.p. please!
We are implementing SAP R/3 ECC 600 and we have SRM too.
In the SRM is possible to create a purchase order with several purchasing groups, but, in MM we cannot because of the purchasing groups is the the header level.
Somebody expert from SAP told to the client that its possible to create a Purchase order in MM with several purchasing groups..
Is it possible? or, where I can find information from SAP that said that its not possible?
Could you help me please?
Regards,
Sandra Palomo

How can I create a PO with different purchasing groups to the same PO?
Could you give me a detail?
Regards,
Sandra Palomo

Setup group category & setup group Key.

Dear Friends,
I am facing some problem in setup group category... Please check this scenario and let me know...if anybody is having any idea about this...
My scenario is: I am having a single work center... on which I can do some machining activity.This WC is used in 100 material routings. but all my 100 materials are grouped into 5 categories. based on the dia... for example 100-120 dia one group 121-140 dia another group like that. If my two successive materials are belong to same group..then.. I donot have any setup time. if my two success materials scheduled on that machine are not belong to same group...then I am having 5 hrs of setup time.
so here setup time I can not mention in the routing...
this can be achieved by setup group and setup group key...and through capacity leveling... we can insert this setup time as per the matrix... in the matrix we need to define the setup times between two different groups..
And here the setup time is almost equal to machining time of one material. max.. they can do 3 materials machining only.. if there is no setup in a day of 16 hrs working. So manageement wants to minimize setup time... so grouping of the materials should be based on the Dia... this is the requirement.
I hope u understood my requirement...
Actually I maintained all the setup group categories, setup group keys in the routing and I maintained setup matrix also...
But during the finite scheduling through Capacity leveling I am not able to consider the setup time in the production order.... This is the problem I am facing... If anybody is having any idea...please share with me..
Regards,
Surya.

Hi Suryanarayana,
I see that you have defined setup type and setup group keys and also setup matrix.
Please check the following under SPRO -> CRP -> Capacity leveling and extended evaluation -> Strategy -> Define strategy profile. There is a standard strategy profile to optimize setup times, which is SAPSFCT005 (Fin.sched.for./disp.acc. to setup group). Check the settings under this profile especially the check box "dispatch at best time for set up" to see if it works.
Best of luck,
Sharabh

Sharepoint 2013 setup group permissions

In my SharePoint 2013 test sharepoint site, I would like to know how the users should normally have access to the test sharepoint site. Would the user sign as themselves individually or would they sign on with a group id? Can you tell me and/or point me
to a url that will show how to setup group permissions and how the users should login?

There are two suggested ways to assign permissions on SharePoint sites:
    Using SharePoint Groups
    Using Active Directory Groups
Note: A site can be set up to either inherit permissions from the parent site, or to allow unique permissions to be set for the site. If the site is set up to inherit permissions from the parent site, you will have to Add Users or Active Directory Groups
to pre-existing SharePoint groups in the parent site.
Using SharePoint groups:
Click on “People and Groups”
Click on “New” from the drop-down menu
Select “New Group” Under “Choose the permission level group members get on this site:… ”
Select “Contribute” and click OK.
Click on “People and Groups”
Click “New”, from the drop-down menu
select “Add Users” Type in the netID(s) you wish to add
Click on “Check Names” (the netID(s) should now be underlined)
Under “Give permission”, select the group you just created and click OK.
Note: If site owners want their site to show up automatically in users' "My Links" in "My Site" then those users must be part of a SharePoint group and that group must be defined as the "Members of this Site" group.
Using Active Directory Groups:
Click on “Peoples and Groups”
Click on “New” from the drop-down menu
select “Add Users” Type in the name of the Active Directory group you wish to add
Click on Check Names (the group name should now be underlined)
Under Give Users permissions directly, select “Contribute” &click ok.
Note: You can specify multiple netID(s) or AD groups by separating the names with a semi-colon(;).
Below are list of permissions you can use for the site..
Permission Level
Description
Full Control
This permission level contains all permissions.      Assigned to the
Site name Owners SharePoint group, by default. This      permission level cannot be customized or deleted.
Design
Can create lists and document libraries, edit      pages and apply themes, borders, and style sheets in the Web site. Not assigned      to any SharePoint group, by default.
Contribute
Can add, edit, and delete items in existing      lists and document libraries. Assigned to the
Site name Members SharePoint      group, by default.
Read
Read-only access to the Web site. Users and      SharePoint groups with this permission level can view items and pages, open      items, and documents. Assigned to the
Site name Visitors SharePoint      group, by default.
Limited Access
The Limited Access permission level is designed      to be combined with fine-grained permissions to give users access to a specific      list, document library, item, or document,
without giving them access to      the entire site. However, to access a list or library, for example, a user      must have permission to open the parent Web site and read shared data such
as the theme and navigation bars of the Web site. The Limited Access permission      level cannot be customized or deleted.
NOTE You cannot assign this permission level to users or SharePoint      groups. Instead, Windows SharePoint Services 3.0 automatically assigns this      permission level to users and SharePoint
groups when you grant them access      to an object on your site that requires that they have access to a higher      level object on which they do not have permissions. For example, if you grant
users access to an item in a list and they do not have access to the list      itself, Windows SharePoint Services 3.0 automatically grants them Limited      Access on the list, and also the site, if needed.

Organization O 50000716 is not a purchasing group; inform system administra

Dear Expert,
Need your help, we using SRM 7 with extended classic scenario, we use workflow for PO with 3 levelling (if the value of po more than 200 million Rp). now, there is no problem when we approve this po for approver 1 and approver 2. but when the approver 3 want to approve this PO, these error show up:
Organization O 50000716 is not a purchasing group; inform system administration ( i actually have assign a purchasing group in function tab for this organizational unit )
System of purchasing organization O 50000658 and purchasing group O 50000716 differ (there is a different with the company code for O 50000658 (cc:1000) & O 50000716 (cc:1100)) but i'm not sure this is the cause.
best regards,
Melynessa

Hi Melynessa
Did you maintained a purchasing organization for the approver 3? A purchasing group and a purchasing organization are needed.
Try to compara the information of approver 1 and 2 with approver 3 (PPOMA_BBP, SU01, etc).
I hope this helps.
Christian Zeuch

Business group information

Error when trying to save the business group information for a newly created business group , it says a duplicate record

Query all your organizations with a classification of "Business Group".
US HRMS Manager: Work Structures > Organization > Description
Select the existing BG you wish to update. Or create a new organization, classify it as a BG and add the required "other" information.
You may need to query the organization table and look at your BG IDs. I suspect you were trying to create an entity that already existed instead of selecting and updating it.
Regards,
Greg

Go back from Cleanup to Setup group

Hi,
I try to jump from a step in the Cleanup-group to a specific step in Setup-group at the same sequence.
I do this with a "Statement" includes the expression "RunState.StepGroup = "Setup", RunState.NextStepIndex = 1". This expression do exactly what I want in an easy example in which I test this expression before I add this step in my Test-Sequence.
I copied this step into my Test-Sequence.... but now, it jumps only to the first step in Cleanup-group .
I'm really confused now...
Attachments:
example.seq ‏7 KB
Test_Sequence.JPG ‏239 KB

Thanks for your analysis, I checked your idea but the option in "Station Options - Execution - Immediately Goto Cleanup on ..." is unchecked.
I have chosen another way to jump back to the setup-group. This one is not really nice, but it works fine.
Now I check in cleanup group over a flaf if an specified error is occured (USB connection to DUT lost). If it's true, I call a SubSequence (repeat handler). I leace the repeat handler with a sequence call to the MainSequence which starts at step 0.
Is this way ok?
thx

Photoshop keeps crashing...saying an attempt was made to load a program with incorrect format. Can anyone help?

photoshop keeps crashing...saying an attempt was made to load a program with incorrect format. Can anyone help?

You can
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

SAP tables with &NC& Auth Group.

In SAP there are about 7000 plus tables with &NC& Auth Group.
Are all these tables not financial relevant.
What is the impact if we change these tables auth group to custom auth groups?

On their own they might not be finance relevant, but might even be system relevent for that matter.
&NC& means "Not Classified" hich should be understood as "no intention to display and or change them from the application layer" as their single fields on their own are not usefull or inconsistent.
The bugger is that if developers don't understand this and security folks don't respect it, then because of one single table you might open access to all other unclassified tables (depending on how they are designed in the Data Dictionary and how they are accessed).
I have seldom seen a SAP system which got this right, primarily because of the developers (also the ones from SAP).
Yes, you can change the groups is SE54. But report it to SAP and keep track of which SP level introduces the new check value. Try to obtain that information from them in advance if you need to, and check that it is conceptually consistent with your concept (minimum requirement is that it should not be conceptually inconsistent with other SAP standard concepts).
If this is a topic for you and delivery classes also play a role, then also search OSS for the term "Current Settings". These give you more options - for specific objects.
Cheers,
Julius

PPM with incorrect setup group information

Similar Messages

Maybe you are looking for