Pre-built useful WDJ applications

Hi Everyone,
does SAP have any pre-built useful WDJ applications (SAP released many VC xApp Analytics applications)? If yes, how can I get my hands on these applications?
Thanks, Jin

Jin,
Follow [this link.|https://www.sdn.sap.com/irj/sdn/nw-ui]. Under Web Dynpro Java header, there are many Web Dynpro tutorials with pre-built projects available for download.
You can also follow [this link|Web Dynpro Java Tutorials and Samples NW 2004] to many Web Dynpro Java tutorials.
Hope this helps.
Vishwas.

Similar Messages

Including a Pre-Built LLB in Application Builder 8.X

I have just recently updated some old code to 8.5.1. This code contains many dynamic calls to VIs located in pre-built LLBs (LLBs that were saved prior to application builder). This application is also compatible with a priority plug-in architecture. So when creating an application or installer in app builder 8.X, how does one include a LLB file? I do not wish to build it. I just want to include it the same way you may include a text file or someother type of source file. LLB files do not show up as individual files in the Project Manager.

AstroGlen wrote:
I would like to create an installer that uninstalls the previous version of software (which was written in 7.1.1). I am assuming it is necessary to make edits to the "registry" category in the installer properties. I am also assuming that I would need to enter the product code for my application. This is the code found in the 7.1.1 application builder \ installer settings \ Properties button. But i do not know the particulars of what needs to be done.
I think when you install an application created/built using a higher version of LV, it ll automatically overwrite any previous version(s) of that application installed in the target PC. We may not need it to be uninstalled manually. Did you try this?
- Partha
LabVIEW - Wires that catch bugs!

Receive an error when closing my program built using LabVIEW application builder

When I close my program built using LabVIEW application builder I receive an application error,"The instruction at "0x77fcb1ad" referenced memory at "0x023a0010". The memory could not be "read". Click OK to terminate the program"
I have no idea why this is happening.

This is most likely due to a reference or similar left open. You will experience this if you leave an image undisposed in IMAQ as well.
Check all of your references and be sure you are cleaning everything up.

Hi, We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

Hi,
We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
Is this default behaviour which cannot be changed or can it be configured to ask user preference?
When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
Please suggest what needs to be done.
Regards,
Pramod

Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
Regards.

How can i built a java application using java debug class on Log4J

Hi,
As java API support the MethodEntryEvent, using which I can get the automatic logging statements when the method is entered or exited as HelloExample.main(with argument type).
Where HelloExample is the class name.
Main is the method entered with its argument types.
In some cases I have the o/p as
-- VM Started --
====== main ======
main -- HelloExample
callerMethod -- HelloExample
====== main end ======
-- The application exited --
By using Log4J is there any possibility of getting these sort of o/p along with the loggers supported by Log4J. i mean to say can i built an java application which supports the MethodEntryEvent and MethodExitEvent from java API and also uses the Log4J debugging. I took an e.g. trace example, which (in J2SE 1.4.x or 5.x) will be found in $JAVA_HOME/demo/jpda/examples.jar and unpacking it by
jar -xvf $JAVA_HOME/demo/jpda/examples.jar i found the com/sun/tools/example/trace/Trace.java and passed the class constructed with logger taken from Log4J. In this case the logging message is displayed on the console. As per the requirement i need to transfer the whole o/p to an output file along with Log4J logger statements. in this case i should not give any command in the cosule except compiling and executing the programme. the programm also should able to run without the main() as i need to integrate Log4J with an application and the code must me application server independent. i need the output as i got using MethodEnteryEvent (shown as above) in case of java application built using Log4J.
Can any one help me in this regard. can any one give me some suggestion or any programme of this sort. All suggestions are welcomed.
Thanks & Regards,

hi,
can someone help me how to implement logging for method entry parameters and
method exit return value.
can someone help me how to use log4j and integrate it to the method entry
logging and method exit logging.
Here what i need is without writing the log statements for the method entry and
method exit i need to log it to the file
along with other log4j debug statements i provide in the file.I should be able
to configure whether to enable/disable the logging
for method entry and method exit. In method entry i should be able to log the
parameters the method take and in method exit
i should be able to log te return value to the log file, before the method is
returned to the callee.
i hope i am clear
Thanks in advance.

Is it possible to change the first page of a web application that was built using the UI?

Hello Community
    Using Sharepoint 2010 Server and the UI I built and application and would like
to continue building the web application using the UI.
    The application's first page was built using a Blank Site template and
the subsequent subsites were built using the Team Site template.
    In retrospect the first page should also have been built using a Team Site template.
    It may be unnecessary to make to delete the application
and create the first page as a Team Site and then have to create all of the
subsites (Team Sites) all over again.
    As a solution to prevent deleting the whole application and creating application
with all of the subsites all over again whether it is possible to do any of the
following:
    - Convert the Blank Site page into a Team Site page which would allow
me to leave all of the subsites as is.
    - rename the Blank site page which would in effect would be renaming the application
then create a new Team Site page which would be essentially creating a new application and
then adding all of the subsites contained in the renamed application that has the first page
as a Blank page.
    And if is possible to add, copy or move the subsites from existing sites to a new Team Site
page, how do you add, copy or move the subsites from one application to a diffent application?
    Thank you
    Shabeaut

Hi Shabeaut,
According to your description, my understanding is that you want to change the template of the root site without creating the susites in another web application.
I recommend to export all the existing subsites and import them to new web application.
More references:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc7c11ec-e4da-4ddb-babd-db76ccb35664/move-subsite-to-new-site-collection?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd321bac-16a7-47e4-842e-00b7ca0f7f05/move-subsite-to-other-site-collection-as-subsite?forum=sharepointadminprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

Sample applications built using Oracle developer 6.0

Please tell me how can if find sample applications built using oracle developer.
Is there any web site on the offering such a service ?

Ali,
Try www.oraclefans.com/oraclefans/
Louis D.

Learning to use flash on a pre-built template.

I am new to flash, and web design at that matter. I am
learning to use flash using a pre-built template. Does anyone know
how to get the buttons on the template to link to files?
Thanks!

Pallett,
> I am new to flash, and web design at that matter. I am
> learning to use flash using a pre-built template.
Ouch! That may be problematic. Where di you get the
pre-built
template?
> Does anyone know how to get the buttons on the
> template to link to files? Thanks!
The global getURL() function links to files (see details in
the
ActionScript 2.0 Language Reference) -- but honestly, since
the specifics of
your template are completely unknown to us, you may find a
hard time getting
answers until you provide more information.
In general -- this is my opinion here, but I'll try to back
it up -- 3rd
party templates are not a good way to learn Flash. The reason
for this is
because template repositories, such as TemplateMonster.com,
farm out their
template designs. There are no centralized standards of
quality in such
templates: 10 to 1, you will not see consistent, clean FLAs
-- on the
inside, I mean. Designers from all over the world throw
together as many
templates as they possibly can (to make as much money as they
possibly can,
of course), with no real quality assurance, because none of
them work under
the same roof.
I've seen countless posts to this forum along the lines of,
"Hey, I just
bought this template, but I can't make sense of it!" And
that's because the
FLA's layers won't be named, layer folders won't be used,
Library assets
won't be named (or will be named poorly), and very little (if
anything) will
be explained in regard to *how* the designer put together
whatever's there.
That said, I certainly don't mean to frighten you into
thinking
templates are a bad thing. Good and bad, in this context, are
somewhat
subjective. But I encourage you to look elsewhere for
*learning* Flash.
There are plenty of online tutorials and resources, and in
fact, the
included documentation in Flash (F1 key) is a great place to
get your
bearings.
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Compatability of running composite application built using CAF

Hi all,
I want to know one basic question about using CAF tool.
Suppose if I use CAF of Netweaver 2004s (Netweaver AS 7.00) to build a composite application, is it possible to deploy the solution to the customer who is having Netweaver AS 620 or 630?
Appreciate your help. Thanks in advance
Regards
Guru

Hi Gurunathan,
That's not really possible. You need to deploy the solution to the same J2EE engine version as NWDS where you built your composite application.
Even SP level must be the same. I recently met the problem that a composite application was built under NWDS 7.0 SP8 and even deployment to 7.0 SP7 J2EE engine was failed because of versions incompatibility!
CAF, J2EE engine and NWDS versions must be the same, it's very important for consistency.
Best regards,
Aliaksei

To invoke an application exe built using Labview from python.

I am trying to invoke an application exe built using Labview from python.
I am able to invoke labview vi, send and receive data. But if I change the vi to exe, it doesn’t work.

This is more of Python. I can suggest you another way, if you can do those changes to your existing code.
This is what I do: If I have to communicate between 2 different platforms I use "File" as a communication medium (Simple method). So if you want to pass data to the LabVIEW code from python, write the data to the file from Python and read the data in LabVIEW and vice versa. I generally use *.ini files for this purpose.
The best solution is the one you find it by yourself

Integrating SWF built using SDK 4.1 into application built using SDK 4.5

Did anyone integrate SWF built using Flex sdk 4.1 into SWF built using Flex SDK 4.5 using SWFLoader?
I am facing some issues while doing so. Can someone please point me to the right direction.

See past threads or my blog about the ”Marshall Plan”
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui

HOW TO VIEW DATA IN PRE-BUILT ANALYTICS DASHBOARDS AND REPORTS

HI FOLKS,
I WANT TO SEE DATA IN THE REPORTS OF PRE-BUILT ANALYTICS DASHBOARDS? EG: AUTOMOTIVE, SALES, SERVICE DASHBOARDS. SO WHAT IS THE COMPLETE PROCESS TO SET UP THIS ENVIRONMENT. I'M USING SIEBEL ANALYTICS VERSION 7.8.5.
THANKS IN ADVANCE
VJ

Hi,
I am new to Business Intelligence Applications and keen on learning it.
I know Informatica and OBIEE(Not a very experienced person).
I have installed BIA on my local windows machine.
I am using Oracle Apps as the source.
In the execute tab I selected the HR-Oracle 11510 execution plan and ran it but it failed.
The workflow error log says the following:
"ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6193 [Error occured during expansion of DB connection parameters [Database connection name DataWarehouse for database connection variable $DBConnection_OLAP is not well defined.
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: CMN_1761 [Timestamp Event: [Tue Feb 26 15:59:35 2008]].
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6226 [ERROR: Failed to initialize session [SIL_InsertRowInRunTable]].
ERROR : LM_36320 [Tue Feb 26 15:59:37 2008] : (1276|3864) Session task instance [SIL_InsertRowInRunTable]: Execution failed.
WARNING : LM_36331 : (1276|3864) Session task instance [SIL_InsertRowInRunTable] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SIL_InsertRowInRunTable] will be failed.
ERROR : LM_36320 : (1276|3864) Workflow [SIL_InsertRowInRunTable]: Execution failed."..
I think I have missed few steps here and there.. I am struck up here.. I don't know what to do... I think its the problem connecting to the source and target schema.. can you please help me out?

Pre-validation using JavaScript cannot work in JSF?

Sometimes we need to do pre-validation using JavaScript in some senarios that data need be entered and validated at client site before it reaches to Web Application Server. Remind that JSF is a server validation. Creator seems not to allow Developers to do pre-validation using JavaScript for any editable input fields in form. I will illustrate an example and hope anyone can help me to solve it out.
Assume that if we write the a new web page that allows User enters Name and Phone. The pre-validation function called test() is written in JavaScript for validating field Phone. For simplicity, the below HTML/JavaScript without nested in table is a simple one for HTML form.
<html>
<body>
<script language="JavaScript">
function test(){
     if (form1.phone.value == "")
          alert("Please enter phone number in digits.");
          return false;
</script>
<form name=form1>
<input id="phone" type="text" size=20><Br>
<input id="name" type="text" size=20><Br>
<input type="submit" id="submit" onclick="test()" value="Submit">
</form>
</body>
</html>
Now, we consider using Java Studio Creator to generate the same form as describing above. The script is shown below:
<?xml version="1.0"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<html>
<head>
<title>testForm Title</title>
</head>
<body rave-layout="grid">
<h:form binding="#{testForm.form1}" id="form1">
<h:inputText binding="#{testForm.textField1}" id="phone" style="position: absolute; left: 192px; top: 96px; width: 168px; height: 23px"/>
<h:inputText binding="#{testForm.textField2}" id="name" style="position: absolute; left: 192px; top: 144px; width: 168px; height: 23px"/>
<h:commandButton binding="#{testForm.button1}" id="submit" style="position: absolute; left: 192px; top: 216px" value="Submit"/>
</h:form>
</body>
</html>
</f:view>
</jsp:root>
After running Script that Creator created, the HTML is generated and reduced (for simplicity) as follows:
<f:view>
<html>
<body rave-layout="grid">
<form action="/rave/rave" id="form1" method="post">
<input id="form1:Phone" type="text"></input>
<input id="form1:name" type="text"></input>
<input id="form1:button1" value="Submit" onClick="test()"></input>
</body>
</html>
</f:view>
Take a look carefully at <input> elements. We see the syntax for naming for each "input" element that there is a semi colon added between form1 and phone or form1 and name. This syntax is generated from built-in JSF components. Hence, I rewrite the test() JavaScript function to match with the naming that Creator generated as follows:
<script language="JavaScript">
function test(){
     if (form1.form1:Phone.value == "")
          alert("Please enter phone number in digits.");
          return false;
</script>
Clearly, this JavaScript cannot be worked because of a semi column that Creator has named it.
I have tried to work arround for this but cannot find a solution except changing the name such as: from <input id="form1:phone" ...> to <input id="form1_phone" ..>. But I could not change or modify the scripts because it is generated from JSF components when running it under browser.
I guess to solve this problem, the naming for elements in form should be reconsidered in the next release of Java Studio Creator.

Hi Marie,
I currently sucess in client pre-validation using JSF. I found a way to do it.
Please take a look of how javascript has been added in the following scripts:
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<html lang="en-US" xml:lang="en-US">
<head>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<title>login Title</title>
</head>
<body style="-rave-layout: grid">
<h:form binding="#{login.form1}" id="form1">
<h:outputLabel binding="#{login.componentLabel1}" for="componentLabel1" id="componentLabel1" style="position: absolute; left: 216px; top: 72px">
<h:outputText binding="#{login.componentLabel1Text}" id="componentLabel1Text" value="Application System Name"/>
</h:outputLabel>
<h:panelGrid binding="#{login.gridPanel1}" columns="3" id="gridPanel1" style="position: absolute; left: 72px; top: 168px; width: 504px; height: 100px">
<h:outputLabel binding="#{login.componentLabel2}" for="componentLabel2" id="componentLabel2">
<h:outputText binding="#{login.componentLabel2Text}" id="componentLabel2Text" value="User Name: "/>
</h:outputLabel>
<h:inputText binding="#{login.textField1}" id="textField1" onclick="" style="width: 149px; height: 22px"/>
<h:outputText binding="#{login.outputText1}" id="outputText1"/>
<h:outputLabel binding="#{login.componentLabel3}" for="componentLabel3" id="componentLabel3">
<h:outputText binding="#{login.componentLabel3Text}" id="componentLabel3Text" value="Password: "/>
</h:outputLabel>
<h:inputSecret binding="#{login.textField2}" id="textField2" style="width: 147px; height: 22px"/>
<h:outputText binding="#{login.outputText2}" id="outputText2"/>
<h:outputLabel binding="#{login.componentLabel4}" for="componentLabel4" id="componentLabel4">
<h:outputText binding="#{login.componentLabel4Text}" id="componentLabel4Text"/>
</h:outputLabel>
<h:commandButton action="#{login.ok_action}" binding="#{login.button1}" id="button1" onclick="return checkUserIdentity(this.form)"
style="width: 90px; height: 25px" value="OK"/>
<h:outputLabel binding="#{login.componentLabel5}" for="componentLabel5" id="componentLabel5">
<h:outputText binding="#{login.componentLabel5Text}" id="componentLabel5Text"/>
</h:outputLabel>
</h:panelGrid>
</h:form>
</body>
<script type="text/javascript">
function checkUserIdentity(form){
var userName = form["form1:textField1"].value;
var userPassword = form["form1:textField2"].value;
if (userName == "") {
alert("Please enter User Name.");
form["form1:textField1"].focus();
return false;
if (userPassword == "" ){
alert("Please enter password.");
form["form1:textField2"].focus();
return false;
form.submit();
return true;
</script>
</html>
</f:view>
</jsp:root>
The key for getting data value from Form based on Javascripts is var userName = form["form1:textField1"].value;
Thanks,
VTT_

Pre-built EULs for Payroll/HRMS

Where can we obtain pre-built EULs for the following Applications modules Payroll/HRMS?

Hi,
You will have to load import the EUL stored in $AU_TOP/discover using the adupdeul.sh script. See note 257798.1 for full details.
Rod West

Pre-built useful WDJ applications

Similar Messages

Maybe you are looking for