Pre-Configured Cisco VPN Client install

Im looking at creating a pre-configured install for the 4.8 client. This normally involves editing cab file contents?? I've been unable to locate a 'how 2' guide for this, does anyone have any ideas, has anyone tried this before, can it be done???

Have located this:
http://www.cisco.com/en/US/customer/products/sw/secursw/ps2308/products_configuration_example09186a008022f999.shtml
but im looking to add security credentials (group and PSK) to the install, can i just swap the configured files within the MSI??

Similar Messages

Cisco VPN client install fails with Error 1722 on Windows 7

Hi,
I am having issues with laptops upgraded from Vista to Windows 7.
Prior to the upgrade they are running Cisco VPN Client 5.0.05.0290. These laptops also have Juniper Network Connect 6.5 and Citrix web client installed. The windows upgrade advisor made no recommendations regarding uninstalling / reinstalling these apps.
I have done an inplace upgade to Windows 7 (Windows Vista Enterprise 32bit to Windows 7 Enterprise 32 bit) and after the install the Cisco client is not working. Uninstalled the client (the uninstall was successful) then reinstalled and the installation fails at Installing Cisco Systems Virtual Adapter - error 1722 there was a problem with the windows installer package.
I have followed the steps for a manual uninstall of the Cisco client and then tried the install again - still not successful. Interestingly (or not) the Juniper Network Connect also fails with the error The Network Connect Virtual adapter driver is not installed properly. This also fails to reinstall after being removed.
I tried removing the VPN clients on another laptop and then running the upgrade but the same errors occured when reinstalling the VPN Client. I have tried the Winfix and DNE patch from Citrix but these fail saying there is a corruption in the application.
On another laptop where only the Cisco VPN client was installed a reinstall was required after the upgrade, but it did install successfully.
On a clean image these applications all install fine, however I have a large number of laptops do upgrade and don't want to do a fresh install and settings migration on all of them.
What files / registry entrys are involved with the DNE adapter so I can manually clear it all out before reinstalling?
Anything else I can do to troubleshoot this issue?
Cheers,
James

You should be able to install the 64 bit version of the Cisco VPN software
Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
MicrosoftFixit50842.msi
(Using Shrew VPN is a possible workaround.)

Cisco VPN client -install error

Hi,
I have a problem when i'm trying to install Cisco VPN client on my Windows 8.1 x64. After downloading 3 or 4 different versions of Cisco it keeps rising the same error concerning a DLL that is required. I'd really appreciate some advice or the reason why
it keeps rising this error.
Greetings,
Cristina

Hi,
I can't find any compatible information with Windows 8 /8.1 about Cisco VPN client:
http://software.cisco.com/download/release.html?mdfid=281940730&catid=268438162&os=Windows&softwareid=282364316&release=5.0.07.0410&rellifecycle=&relind=AVAILABLE&reltype=latest
You can just check these steps, If following steps didn't work for you, please contact Cisco support for further help.
On Windows 8.1, you will need to update the DNE first:
Download: Ftp://files.citrix.com/dneupdate64.msi
Install Cicso vpn client 5.0.07.0440-k9
http://helpdeskpal.blogspot.ca/
Please Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these
sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to
make sure that you completely understand the risk before retrieving any software from the Internet.
Kate Li
TechNet Community Support

Cisco VPN Client and Quick VPN interaction?

I have both a Cisco VPN client for connecting to my company LAN and a QuickVPN client for connecting to my home LAN installed on my W2K laptop. Both start and run correctly, and both connect just as they should. My home LAN uses a WRV54G router to provide VPN connection. I can alternate back and forth between the two clients and connect to each LAN with no obvious issues, but not at the same time, of course.
Here's the question. When I connect to the home LAN, I can log on with no problem and I can remotely administer the WRV54G with no problem. I can ping all of the wired and wireless W2K computers on my home LAN with no problem. However, I cannot "see", browse or map any of the shared resources on my home LAN. I have created user accounts on the home LAN computers for my laptop and router logins and I have given these accounts permissions to my shared resources, but I still cannot get to them. Linksys tech support has been absolutely no help whatsoever, even after repeated attempts.
While trying to troubleshoot this myself, I've noticed that when the Cisco VPN client is running and I'm connected to my company LAN, the IP address and subnet of my computer is changed to ones assigned by the DHCP server at my company. This seems to happen because the Cisco client activates the "Local Area Connection Number 2" on my laptop and assigns IP addresses using it. However, when I'm using the QuickVPN client to connect to my home, the IP address and subnet of my laptop continues to be those assigned by whatever local network I'm connected to (e.g. hotel, etc).
I'm wondering if the QuickVPN is supposed to be assigning an IP address and subnet to my laptop from the WRV54G's DHCP server when I connect to my home LAN. If so, could the Cisco VPN client installed on my laptop be preventing that from happening?
Sorry for the long post, but I'm at my wit's end on this one and Linksys is just no help at all.

1. The Cisco VPN client creates a virtual interface on your computer. This allows you to route traffic to the tunnel. The QuickVPN client is simpler. It only encrypts the traffic to the other end. It does not use a virtual interface. That's why you don't have another IP address when connected with QuickVPN. QuickVPN only encrypts IP packets with IPSec from your computer to 192.168.1.* (or whatever you may use on your WRV LAN) and sends them to the WRV's public IP address.
2. Microsoft Windows file sharing and LAN network browsing depends on network broadcasts. Those only work inside a LAN. If you connect from the outside to a LAN, broadcasts won't go through the VPN tunnel. This means you cannot use standard name windows workgroup name resolution to access shares. Those are propagated with broadcasts which will never go through the VPN tunnel. This means you are not able to use workgroup browsing. All you can to do access your shares is to use the IP address of the other computer.
In short:
\\mycomputer\share won't work
\\192.168.1.50\share works
(assuming the general sharing setup is O.K., i.e. you can use sharing correctly inside your LAN).
Of course, firewalls on the server end may cause problems. Access comes in from a public IP address. This may be blocked. Check the firewall logs on the server to find out if this is the case or not.
Moreover, establishing the VPN connection from a private LAN to a private LAN may not work. This is due to the double network address translation which breaks IPSec and thus the connection. If the hotel uses private IP addresses, this may be the case. But in that case you won't get ping responses from your WRV LAN.
What definitively won't work is in case when the hotel uses the same IP address subnet as you. If the hotel uses 192.168.1.* addresses and your WRV uses 192.168.1.* addresses you cannot connect. QuickVPN does only IPSec tunneling. There is no address translation in QuickVPN. Therefore connecting the identical private IP address subnet through QuickVPN will never work because all addresses exists twice, once on either side.

Cisco VPN Client - Connects but no shares

My Windows IT folks configured Cisco VPN Client 4.9.0.1 (0100) on both the XP and Mac side of my MacBook Pro.
Authentication works fine from both sides but none of the shared drives or folders mount on the Mac side. They do mount via Windows Explorer from the XP side. The configurations are exactly the same.
From the Mac side using Terminal I am able to ping the various shared drives on the company server. How can I get them to mount.

Hi KW and Welcome to Apple Discussions...
You will receive more "views" to your post if you reposted in the Leopard forum... go here: http://discussions.apple.com/category.jspa?categoryID=235
Carolyn

I cannot install Cisco VPN Client 64-bit in windows 8

Hi
I bought new laptop which is preinstalled with widows 8 EM OS.. But for my usage i need to install cisco vpn client (64-bit version) software in my windows 8 EM OS.. which i cannot proceed actually because of the following error :
Error 28000 : Before installing the cisco systems vpn client 5.0.7.0290, you must uninstall the previous version of cisco systems vpn client 5.0.7.0290, using the Add/Remove program files option in the control panel, then restart your system
Following the above popup again a popup prompts displaying :
I have tried to uninstall the program from control panel but i could not find vpn client installed in my system at all... Please give me suggestion how to uninstall and install the new one..
Could you please advise how i can resolve the above issue and setup Cisco vpn client in my windows 8 OS? your reply is more worthy to carry on my work...

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application. If you have a question about another technology (such as Windows), you can ask in another forum. If you're unsure which forum, a Bing search often works the fastest or ask
here: http://social.microsoft.com/Forums/en-US/whatforum/threads
However, I'd ask in the
Windows 8 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Unable to install Cisco VPN Client on Windows 7

Hello,
After a successfull uninstallation of Cisco VPN version 4. I try to install Cisco VPN Client version 5.0.07.0290.
But after launching vpnclient_setup.msi, the wizard is starting. When I click on Next button, I have the following message: "installation ended prematurely because of an error".
In attachment, I add the details of the error find in the windows logs (logError.txt) and the logs generated from MSI installer in verbose mode (log2.txt).
My computer is a lenovo W500 with Windows 7 64 bits and 4 GB of memory (compliant with the Cisco VPN Client requirements).
I have administrator privileges on this computer.
Please help me !
I need to use it to connect to my company network.
Thanks in advance.
BR
Jerome

You should be able to install the 64 bit version of the Cisco VPN software
Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
Using Shrew VPN is a workaround more than a solution / answer to this issue.
You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
MicrosoftFixit50842.msi

Failed to install Cisco VPN client 5.0.07.0440 on win 7 64bit [Error 1722]

Hi Gurus,when I tried to install Cisco VPN Client 5.0.07.0440 on Win 7 64bit, the system would pop up an Error 1722( Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) at the last stage of copying files. Then it would roll back .
I had tried to clean the temp files, restart windows installer services, and also re-register the MSIEXEC file. However, it would still pop up the error during the installation. For our company, it is a common issue. So, could you please offer me some advice on this?

Thank you for your reply.
I had checked the software again and found out.
1. The MSI installer package is fine, because I can install the software on another PC.
2. It is not like that, because I can start the installation procedure and run it smoothly until on the 88% of copying files.
For now, I had only found this issue on one PC.
Thanks.

Cisco VPN Client wont install Error 1406

Hello
I am installing Cisco VPN Client on my Windows 7 32-bit laptop but it doesn't work.
I have downloaded VPN Client ver "vpnclient-win-msi-5.0.07.0410-k9" which is supposed to be assigned for Win 32 bit but i get a lot of error like his:
"Error 1406. Could not write value Maximum Plugins to key \System\Current\Controlset\Services\DNE\Parameters
Verify that you have sufficient access to that key or contact your support personnel.
I have tried a lot of suggestions from the internet but it doesn't seem to work. Please help!

Thank you so much for your response, John.
Yes, i have clicked on "Ignore", however, i receve the same error message for a different address (\System\Current\Controlset\Services\DNE\Parameters) and the Error nuimber changes. It goes from 1401 to 1406.
I Keep Ignoring those error messages but i do get more than 50 of them. And after ignoring a bit more, it gives me some messag stating that "The installation could not be performed" So my only option at that time is "Abort"
:S

Has anyone installed a Cisco VPN client on a new MacBook Air?

It's one of the new oned with Mac OSX Lion.
If so, can you give me any tips? In the downloader, the .dmg file is listed as a Disk Image, and it won't run and install.
My company is very particular, and I have to run the Cisco VPN client to access a corporate control panel I need.
I've always been a PC user before, so I'm having a bit of a learning curve, but I approached the installation just as I did other apps that installed correctly.
Thanks!
Teri

First, OS X has a built-in Cisco client. You should use that if at all possible. Cisco's Mac client is notoriously bad.
If you must install the client, what happens when you try to mount the disk image?

Cisco VPN client x64 for win7 - will not install

Hello guys,
I have fresh windows 7 x64 installation and I try install Cisco VPN client (vpnclient-winx64-msi-5.0.07.0290-k9.exe). Installation ends with fatal error "Installation ended prematurely of an error". I red lot of 'step-by-step' how to solve this problem (run as administrator, even though that I'm administrator; UAC disabled; run in WinXP-mode; etc), without success.
I tried run installation process from cmd with verbose logging "msiexec /i vpnclient_setup.msi /lv log.txt" (and other 'recomended' optional parameters). The same result - fatal error.
Can anybody tell me where is the problem? (installation file is not corupted)
Verbose log ends with this (whole log is attached):
<cut>
Action ended 22:35:25: WiseNextDlg. Return value 3.
DEBUG: Error 2896: Executing action WiseNextDlg failed.
Internal Error 2896. WiseNextDlg
Action ended 22:35:25: Welcome_Dialog. Return value 3.
MSI (c) (70:2C) [22:35:25:997]: Doing action: Fatal_Error
Action start 22:35:25: Fatal_Error.
MSI (c) (70:2C) [22:35:25:998]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Fatal_Error'
MSI (c) (70:18) [22:35:26:725]: Doing action: WiseCleanup
Action start 22:35:26: WiseCleanup.
MSI (c) (70:1C) [22:35:26:736]: Invoking remote custom action. DLL: C:\Users\kyrcm\AppData\Local\Temp\MSI2023.tmp, Entrypoint: Cleanup
Action ended 22:35:26: WiseCleanup. Return value 1.
Action ended 22:35:26: Fatal_Error. Return value 2.
Action ended 22:35:26: INSTALL. Return value 3.
MSI (c) (70:2C) [22:35:26:791]: Destroying RemoteAPI object.
MSI (c) (70:4C) [22:35:26:792]: Custom Action Manager thread ending.
=== Logging stopped: 4. 10. 2010 22:35:26 ===
MSI (c) (70:2C) [22:35:26:794]: Note: 1: 1708
MSI (c) (70:2C) [22:35:26:794]: Product: Cisco Systems VPN Client 5.0.07.0290 -- Installation operation failed.
</cut>
thanks,
martin

LOG:
=== Verbose logging started: 13.10.2010 14:58:45 Build type: SHIP UNICODE 5.00.7600.00 Calling process: C:\Windows\SysWOW64\msiexec.exe ===
MSI (c) (48:6C) [14:58:45:636]: Font created. Charset: Req=0, Ret=0, Font: Req=, Ret=Arial
MSI (c) (48:6C) [14:58:45:636]: Font created. Charset: Req=0, Ret=0, Font: Req=, Ret=Arial
MSI (c) (48:AC) [14:58:45:657]: Resetting cached policy values
MSI (c) (48:AC) [14:58:45:657]: Machine policy value 'Debug' is 0
MSI (c) (48:AC) [14:58:45:657]: ******* RunEngine:
           ******* Product: vpnclient_setup.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (48:AC) [14:58:45:666]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (48:AC) [14:58:45:683]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi' against software restriction policy
MSI (c) (48:AC) [14:58:45:683]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (48:AC) [14:58:45:683]: SOFTWARE RESTRICTION POLICY: C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi is not digitally signed
MSI (c) (48:AC) [14:58:45:685]: SOFTWARE RESTRICTION POLICY: C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (48:AC) [14:58:45:738]: Cloaking enabled.
MSI (c) (48:AC) [14:58:45:738]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (48:AC) [14:58:45:744]: End dialog not enabled
MSI (c) (48:AC) [14:58:45:744]: Original package ==> C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi
MSI (c) (48:AC) [14:58:45:744]: Package we're running from ==> C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi
MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: Compatibility mode property overrides found.
MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: looking for appcompat database entry with ProductCode '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (48:AC) [14:58:45:753]: MSCOREE not loaded loading copy from system32
MSI (c) (48:AC) [14:58:45:755]: Machine policy value 'TransformsSecure' is 0
MSI (c) (48:AC) [14:58:45:755]: User policy value 'TransformsAtSource' is 0
MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisablePatch' is 0
MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'AllowLockdownPatch' is 0
MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (c) (48:AC) [14:58:45:756]: APPCOMPAT: looking for appcompat database entry with ProductCode '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
MSI (c) (48:AC) [14:58:45:756]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (48:AC) [14:58:45:757]: Transforms are not secure.
MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\log.txt'.
MSI (c) (48:AC) [14:58:45:757]: Command Line: CURRENTDIRECTORY=C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9 CLIENTUILEVEL=0 CLIENTPROCESSID=7496
MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{A8E53AA2-297F-4262-9996-753440EF4AB0}'.
MSI (c) (48:AC) [14:58:45:757]: Product Code passed to Engine.Initialize:           ''
MSI (c) (48:AC) [14:58:45:757]: Product Code from property table before transforms: '{467D5E81-8349-4892-9E81-C3674ED8E451}'
MSI (c) (48:AC) [14:58:45:757]: Product Code from property table after transforms: '{467D5E81-8349-4892-9E81-C3674ED8E451}'
MSI (c) (48:AC) [14:58:45:757]: Product not registered: beginning first-time install
MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (c) (48:AC) [14:58:45:757]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (c) (48:AC) [14:58:45:757]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (48:AC) [14:58:45:757]: Adding new sources is allowed.
MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (c) (48:AC) [14:58:45:757]: Package name extracted from package path: 'vpnclient_setup.msi'
MSI (c) (48:AC) [14:58:45:757]: Package to be registered: 'vpnclient_setup.msi'
MSI (c) (48:AC) [14:58:45:758]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (c) (48:AC) [14:58:45:758]: Machine policy value 'DisableMsi' is 0
MSI (c) (48:AC) [14:58:45:758]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (c) (48:AC) [14:58:45:758]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (48:AC) [14:58:45:758]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (c) (48:AC) [14:58:45:758]: Running product '{467D5E81-8349-4892-9E81-C3674ED8E451}' with elevated privileges: Product is assigned.
MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9'.
MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '0'.
MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '7496'.
MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (c) (48:AC) [14:58:45:758]: TRANSFORMS property is now:
MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (c) (48:AC) [14:58:45:758]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming
MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Favorites
MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Documents
MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Recent
MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\SendTo
MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Templates
MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Local
MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Pictures
MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Desktop
MSI (c) (48:AC) [14:58:45:764]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (c) (48:AC) [14:58:45:764]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (c) (48:AC) [14:58:45:765]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (c) (48:AC) [14:58:45:769]: MSI_LUA: Setting AdminUser property to 1 because this is the client or the user has already permitted elevation
MSI (c) (48:AC) [14:58:45:769]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (c) (48:AC) [14:58:45:769]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'CIO'.
MSI (c) (48:AC) [14:58:45:769]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'Accenture'.
MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi'.
MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi'.
MSI (c) (48:AC) [14:58:45:769]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\'.
MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\'.
MSI (c) (48:6C) [14:58:45:770]: PROPERTY CHANGE: Adding VersionHandler property. Its value is '5.00'.
=== Logging started: 13.10.2010 14:58:45 ===
MSI (c) (48:AC) [14:58:45:776]: Note: 1: 2205 2: 3: PatchPackage
MSI (c) (48:AC) [14:58:45:776]: Machine policy value 'DisableRollback' is 0
MSI (c) (48:AC) [14:58:45:776]: User policy value 'DisableRollback' is 0
MSI (c) (48:AC) [14:58:45:776]: PROPERTY CHANGE: Adding UILevel property. Its value is '5'.
MSI (c) (48:AC) [14:58:45:776]: Note: 1: 2262 2: Font 3: -2147287038
MSI (c) (48:AC) [14:58:45:777]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding SHIMFLAGS property. Its value is '512'.
MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (c) (48:AC) [14:58:45:777]: Doing action: INSTALL
Action start 14:58:45: INSTALL.
MSI (c) (48:AC) [14:58:45:777]: UI Sequence table 'InstallUISequence' is present and populated.
MSI (c) (48:AC) [14:58:45:777]: Running UISequence
MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding EXECUTEACTION property. Its value is 'INSTALL'.
MSI (c) (48:AC) [14:58:45:778]: Doing action: WiseStartup
Action start 14:58:45: WiseStartup.
MSI (c) (48:AC) [14:58:45:778]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseStartup'
MSI (c) (48:8C) [14:58:45:791]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8E45.tmp, Entrypoint: Startup
MSI (c) (48:B0) [14:58:45:793]: Cloaking enabled.
MSI (c) (48:B0) [14:58:45:793]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (48:B0) [14:58:45:793]: Connected to service for CA interface.
Action ended 14:58:45: WiseStartup. Return value 1.
MSI (c) (48:AC) [14:58:45:926]: Doing action: LaunchConditions
Action start 14:58:45: LaunchConditions.
Action ended 14:58:45: LaunchConditions. Return value 1.
MSI (c) (48:AC) [14:58:45:927]: Doing action: SetDLLDIR
Action start 14:58:45: SetDLLDIR.
MSI (c) (48:AC) [14:58:45:927]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetDLLDIR'
MSI (c) (48:AC) [14:58:45:927]: PROPERTY CHANGE: Adding DLLDIR property. Its value is '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
Action ended 14:58:45: SetDLLDIR. Return value 1.
MSI (c) (48:AC) [14:58:45:927]: Doing action: SetDLLLOC
Action start 14:58:45: SetDLLLOC.
MSI (c) (48:AC) [14:58:45:927]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetDLLLOC'
MSI (c) (48:AC) [14:58:45:927]: PROPERTY CHANGE: Adding DLLLOC property. Its value is 'C:\Users\ANDREA\AppData\Local\Temp\{467D5E81-8349-4892-9E81-C3674ED8E451}\'.
Action ended 14:58:45: SetDLLLOC. Return value 1.
MSI (c) (48:AC) [14:58:45:927]: Doing action: CsCa_CopyInstHelperDll
Action start 14:58:45: CsCa_CopyInstHelperDll.
MSI (c) (48:AC) [14:58:45:928]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CsCa_CopyInstHelperDll'
MSI (c) (48:DC) [14:58:45:939]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8EE2.tmp, Entrypoint: f0
MSI (c) (48!40) [14:58:45:960]: PROPERTY CHANGE: Adding CsProp_CopyInstHelperDll property. Its value is '1'.
Action ended 14:58:45: CsCa_CopyInstHelperDll. Return value 1.
MSI (c) (48:AC) [14:58:45:961]: Skipping action: ClearDisableUAP (condition is false)
MSI (c) (48:AC) [14:58:45:961]: Skipping action: CsCaErr_NTNotSupported1 (condition is false)
MSI (c) (48:AC) [14:58:45:961]: Skipping action: CsCaErr_Win64BitNotSupported2 (condition is false)
MSI (c) (48:AC) [14:58:45:961]: Skipping action: SetPatchMode (condition is false)
MSI (c) (48:AC) [14:58:45:961]: Skipping action: SetPatchReinstallMode (condition is false)
MSI (c) (48:AC) [14:58:45:961]: Doing action: CsCaDll_AreWeInstalled1
Action start 14:58:45: CsCaDll_AreWeInstalled1.
MSI (c) (48:AC) [14:58:45:961]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CsCaDll_AreWeInstalled1'
MSI (c) (48:04) [14:58:45:972]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8F02.tmp, Entrypoint: f2
MSI (c) (48!C0) [14:58:45:997]: PROPERTY CHANGE: Adding CLIENT_INSTALLED property. Its value is '0'.
Action ended 14:58:45: CsCaDll_AreWeInstalled1. Return value 1.
MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaDll_AreWeInstalled (condition is false)
MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaProp_SetLegacyClient2Unity (condition is false)
MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaDll_ClientAlreadyInstalledOnVista (condition is false)
MSI (c) (48:AC) [14:58:45:998]: Doing action: Setup_Dialog
Action start 14:58:45: Setup_Dialog.
MSI (c) (48:AC) [14:58:45:999]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Setup_Dialog'
Info 2898. For MSSansSerif8 textstyle, the system created a 'MS Sans Serif' font, in 1 character set, of 13 pixels height.
Info 2898. For Arial10 textstyle, the system created a 'Arial' font, in 1 character set, of 16 pixels height.
Info 2898. For Arial14 textstyle, the system created a 'Arial' font, in 1 character set, of 22 pixels height.
Action ended 14:58:46: Setup_Dialog. Return value 1.
MSI (c) (48:AC) [14:58:46:030]: Doing action: FindRelatedProducts
Action start 14:58:46: FindRelatedProducts.
MSI (c) (48:AC) [14:58:46:031]: Note: 1: 2262 2: Upgrade 3: -2147287038
Action ended 14:58:46: FindRelatedProducts. Return value 1.
MSI (c) (48:AC) [14:58:46:031]: Doing action: AppSearch
Action start 14:58:46: AppSearch.
MSI (c) (48:AC) [14:58:46:032]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (c) (48:AC) [14:58:46:032]: Note: 1: 2262 2: CompLocator 3: -2147287038
MSI (c) (48:AC) [14:58:46:033]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DNE\Parameters\Order 3: 2
MSI (c) (48:AC) [14:58:46:033]: Note: 1: 2262 2: IniLocator 3: -2147287038
MSI (c) (48:AC) [14:58:46:033]: Note: 1: 2262 2: DrLocator 3: -2147287038
Action ended 14:58:46: AppSearch. Return value 1.
MSI (c) (48:AC) [14:58:46:033]: Skipping action: CCPSearch (condition is false)
MSI (c) (48:AC) [14:58:46:033]: Skipping action: CCPDialog (condition is false)
MSI (c) (48:AC) [14:58:46:033]: Skipping action: RMCCPSearch (condition is false)
MSI (c) (48:AC) [14:58:46:033]: Doing action: ValidateProductID
Action start 14:58:46: ValidateProductID.
Action ended 14:58:46: ValidateProductID. Return value 1.
MSI (c) (48:AC) [14:58:46:033]: Doing action: CostInitialize
Action start 14:58:46: CostInitialize.
MSI (c) (48:AC) [14:58:46:034]: Machine policy value 'MaxPatchCacheSize' is 10
MSI (c) (48:AC) [14:58:46:035]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'C:\'.
MSI (c) (48:AC) [14:58:46:036]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
Action ended 14:58:46: CostInitialize. Return value 1.
MSI (c) (48:AC) [14:58:46:036]: Doing action: FileCost
Action start 14:58:46: FileCost.
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: RemoveFile 3: -2147287038
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: MoveFile 3: -2147287038
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: TypeLib 3: -2147287038
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: IniFile 3: -2147287038
MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: ReserveCost 3: -2147287038
Action ended 14:58:46: FileCost. Return value 1.
MSI (c) (48:AC) [14:58:46:038]: Doing action: IsolateComponents
Action start 14:58:46: IsolateComponents.
MSI (c) (48:AC) [14:58:46:040]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (48:AC) [14:58:46:041]: Note: 1: 2262 2: IsolatedComponent 3: -2147287038
MSI (c) (48:AC) [14:58:46:041]: Note: 1: 2205 2: 3: Patch
Action ended 14:58:46: IsolateComponents. Return value 1.
MSI (c) (48:AC) [14:58:46:041]: Doing action: CostFinalize
Action start 14:58:46: CostFinalize.
MSI (c) (48:AC) [14:58:46:041]: PROPERTY CHANGE: Adding OutOfDiskSpace property. Its value is '0'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding OutOfNoRbDiskSpace property. Its value is '0'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceAvailable property. Its value is '0'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceRequired property. Its value is '0'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceRemaining property. Its value is '0'.
MSI (c) (48:AC) [14:58:46:042]: Note: 1: 2205 2: 3: Patch
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding TARGETDIR property. Its value is 'C:\'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding WWWROOT property. Its value is 'C:\'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding GAC property. Its value is 'C:\'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding System16Folder property. Its value is 'C:\Windows\'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Drivers property. Its value is 'C:\Windows\system32\Drivers\'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding WinSxS property. Its value is 'C:\Windows\'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding ProfilesFolder property. Its value is 'C:\Windows\'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Cisco_Systems_VPN_Client property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems VPN Client\'.
MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Cisco_Systems property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding CommonFiles64Folder.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_CFDetNet.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_DNCF.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\Common Files\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_DNE.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\DNE\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding CommonFiles64Folder.0525718E_E263_4E57_A46E_C584C25A7F93 property. Its value is 'C:\Program Files\Common Files\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR2 property. Its value is 'C:\Program Files (x86)\VPN Client\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR1 property. Its value is 'C:\Program Files (x86)\Cisco Systems\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding updates property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\updates\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding TempInstall property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\TempInstall\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Resources property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Resources\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Profiles property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Profiles\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Logs property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Logs\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding include property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\include\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Certificates property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Certificates\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding accessible property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\accessible\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Setup property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Setup\'.
MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Languages property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Languages\'.
MSI (c) (48:AC) [14:58:46:043]: Target path resolution complete. Dumping Directory table...
MSI (c) (48:AC) [14:58:46:043]: Note: target paths subject to change (via custom actions or browsing)
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TARGETDIR    , Object: C:\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WWWROOT    , Object: C:\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: GAC    , Object: C:\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: MyPicturesFolder    , Object: C:\Users\andrea\Pictures\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonAppDataFolder    , Object: C:\ProgramData\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WindowsFolder    , Object: C:\Windows\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: System16Folder    , Object: C:\Windows\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TemplateFolder    , Object: C:\ProgramData\Microsoft\Windows\Templates\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: AdminToolsFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: System64Folder    , Object: C:\Windows\system32\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Drivers    , Object: C:\Windows\system32\Drivers\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WinSxS    , Object: C:\Windows\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: SystemFolder    , Object: C:\Windows\SysWOW64\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: FontsFolder    , Object: C:\Windows\Fonts\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TempFolder    , Object: C:\Users\ANDREA\AppData\Local\Temp\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProfilesFolder    , Object: C:\Windows\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: AppDataFolder    , Object: C:\Users\andrea\AppData\Roaming\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: FavoritesFolder    , Object: C:\Users\andrea\Favorites\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: NetHoodFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: DesktopFolder    , Object: C:\Users\Public\Desktop\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: RecentFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Recent\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: StartMenuFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramMenuFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Cisco_Systems_VPN_Client    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems VPN Client\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: StartupFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Cisco_Systems    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: PersonalFolder    , Object: C:\Users\andrea\Documents\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: SendToFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\SendTo\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: PrintHoodFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: LocalAppDataFolder    , Object: C:\Users\andrea\AppData\Local\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramFiles64Folder    , Object: C:\Program Files\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder    , Object: C:\Program Files\Common Files\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_CFDetNet.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_DNCF.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\Common Files\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_DNE.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\DNE\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder.0525718E_E263_4E57_A46E_C584C25A7F93    , Object: C:\Program Files\Common Files\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramFilesFolder    , Object: C:\Program Files (x86)\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFilesFolder    , Object: C:\Program Files (x86)\Common Files\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR2    , Object: C:\Program Files (x86)\VPN Client\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR1    , Object: C:\Program Files (x86)\Cisco Systems\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: updates    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\updates\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TempInstall    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\TempInstall\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Resources    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Resources\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Profiles    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Profiles\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Logs    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Logs\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: include    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\include\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Certificates    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Certificates\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: accessible    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\accessible\
MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Setup    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Setup\
MSI (c) (48:AC) [14:58:46:044]: Dir (target): Key: Languages    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Languages\
MSI (c) (48:AC) [14:58:46:045]: Note: 1: 2262 2: RemoveFile 3: -2147287038
Action ended 14:58:46: CostFinalize. Return value 1.
MSI (c) (48:AC) [14:58:46:045]: Doing action: MigrateFeatureStates
Action start 14:58:46: MigrateFeatureStates.
Action ended 14:58:46: MigrateFeatureStates. Return value 0.
MSI (c) (48:AC) [14:58:46:047]: Doing action: SetWizardProperty1
Action start 14:58:46: SetWizardProperty1.
MSI (c) (48:AC) [14:58:46:048]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetWizardProperty1'
MSI (c) (48:AC) [14:58:46:048]: PROPERTY CHANGE: Adding WiseCurrentWizard property. Its value is 'Welcome_Dialog'.
Action ended 14:58:46: SetWizardProperty1. Return value 1.
MSI (c) (48:AC) [14:58:46:048]: Doing action: Welcome_Dialog
Action start 14:58:46: Welcome_Dialog.
MSI (c) (48:AC) [14:58:46:049]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Welcome_Dialog'
MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2262 2: ReserveCost 3: -2147287038
MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2205 2: 3: _RemoveFilePath
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: TypeLib 3: -2147287038
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: PROPERTY CHANGE: Modifying CostingComplete property. Its current value is '0'. Its new value: '1'.
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: ProgId 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: PublishComponent 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: SelfReg 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Font 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (48:2C) [14:58:46:076]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceAvailable property. Its current value is '0'. Its new value: '60293640'.
MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceRequired property. Its current value is '0'. Its new value: '50274'.
MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceRemaining property. Its current value is '0'. Its new value: '60243366'.
MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Adding PrimaryVolumePath property. Its value is 'C:'.
MSI (c) (48:6C) [14:58:46:746]: Doing action: WiseNextDlg
Action start 14:58:46: WiseNextDlg.
MSI (c) (48:6C) [14:58:46:746]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseNextDlg'
Action ended 14:58:46: WiseNextDlg. Return value 3.
DEBUG: Error 2896: Executing action WiseNextDlg failed.
Internal Error 2896. WiseNextDlg
Action ended 14:58:46: Welcome_Dialog. Return value 3.
MSI (c) (48:AC) [14:58:46:753]: Doing action: Fatal_Error
Action start 14:58:46: Fatal_Error.
MSI (c) (48:AC) [14:58:46:754]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Fatal_Error'
MSI (c) (48:6C) [14:58:47:418]: Doing action: WiseCleanup
Action start 14:58:47: WiseCleanup.
MSI (c) (48:6C) [14:58:47:418]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseCleanup'
MSI (c) (48:40) [14:58:47:445]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI94AE.tmp, Entrypoint: Cleanup
Action ended 14:58:47: WiseCleanup. Return value 1.
Action ended 14:58:47: Fatal_Error. Return value 2.
Action ended 14:58:47: INSTALL. Return value 3.
MSI (c) (48:AC) [14:58:47:467]: Destroying RemoteAPI object.
MSI (c) (48:B0) [14:58:47:487]: Custom Action Manager thread ending.
=== Logging stopped: 13.10.2010 14:58:47 ===
MSI (c) (48:AC) [14:58:47:488]: Note: 1: 1708
MSI (c) (48:AC) [14:58:47:488]: Product: Cisco Systems VPN Client 5.0.07.0290 -- Installation operation failed.
MSI (c) (48:AC) [14:58:47:489]: Windows Installer installed the product. Product Name: Cisco Systems VPN Client 5.0.07.0290. Product Version: 5.0.7. Product Language: 1033. Manufacturer: Cisco Systems, Inc.. Installation success or error status: 1603.
MSI (c) (48:AC) [14:58:47:491]: Grabbed execution mutex.
MSI (c) (48:AC) [14:58:47:491]: Cleaning up uninstalled install packages, if any exist
MSI (c) (48:AC) [14:58:47:493]: MainEngineThread is returning 1603
=== Verbose logging stopped: 13.10.2010 14:58:47 ===

How setup SPA525 vpn client?How configuration Cisco VPN server?

Hi all,
How setup SPA525 vpn?
How configuration Cisco VPN server for SPA525?
Regards
John

Hi John,
Do you want to setup the SPA525 on the UC300? If so the UC300 does not support any VPN or remote users. If you need configuration help with the UC5XX just let me know.
Thank you,
Jason Nickle

Need HELPS! ASA 5505 8.4 Cisco VPN Client cannot ping any internal host

Hi:
Need your great help for my new ASA 5505 (8.4)
I just set a new ASA 5505 with 8.4. However, I cannot ping any host after VPN in with Cisco VPN client. Please see below posted configuration file, thanks for any suggestion.
ASA Version 8.4(3)
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 2
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 172.29.8.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 177.164.222.140 255.255.255.248
ftp mode passive
clock timezone GMT 0
dns server-group DefaultDNS
domain-name ABCtech.com
same-security-traffic permit inter-interface
object network obj_any
subnet 172.29.8.0 255.255.255.0
object service RDP
service tcp source eq 3389
object network orange
host 172.29.8.151
object network WAN_173_164_222_138
host 177.164.222.138
object service SMTP
service tcp source eq smtp
object service PPTP
service tcp source eq pptp
object service JT_WWW
service tcp source eq www
object service JT_HTTPS
service tcp source eq https
object network obj_lex
subnet 172.29.88.0 255.255.255.0
description Lexington office network
object network obj_HQ
subnet 172.29.8.0 255.255.255.0
object network guava
host 172.29.8.3
object service L2TP
service udp source eq 1701
access-list VPN_Tunnel_User standard permit 172.29.8.0 255.255.255.0
access-list VPN_Tunnel_User standard permit 172.29.88.0 255.255.255.0
access-list inside_access_in extended permit icmp any any
access-list inside_access_in extended deny tcp any any eq 135
access-list inside_access_in extended deny tcp any eq 135 any
access-list inside_access_in extended deny udp any eq 135 any
access-list inside_access_in extended deny udp any any eq 135
access-list inside_access_in extended deny tcp any any eq 1591
access-list inside_access_in extended deny tcp any eq 1591 any
access-list inside_access_in extended deny udp any eq 1591 any
access-list inside_access_in extended deny udp any any eq 1591
access-list inside_access_in extended deny tcp any any eq 1214
access-list inside_access_in extended deny tcp any eq 1214 any
access-list inside_access_in extended deny udp any any eq 1214
access-list inside_access_in extended deny udp any eq 1214 any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit tcp any any eq www
access-list inside_access_in extended permit tcp any eq www any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq 33
89
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq sm
tp
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq pp
tp
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq ww
w
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq ht
tps
access-list outside_access_in extended permit gre any host 177.164.222.138
access-list outside_access_in extended permit udp any host 177.164.222.138 eq 17
01
access-list outside_access_in extended permit ip any any
access-list inside_access_out extended permit icmp any any
access-list inside_access_out extended permit ip any any
access-list outside_cryptomap extended permit ip 172.29.8.0 255.255.255.0 172.29
.88.0 255.255.255.0
access-list inside_in extended permit icmp any any
access-list inside_in extended permit ip any any
access-list inside_in extended permit udp any any eq isakmp
access-list inside_in extended permit udp any eq isakmp any
access-list inside_in extended permit udp any any
access-list inside_in extended permit tcp any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool ABC_HQVPN_DHCP 172.29.8.210-172.29.8.230 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm history enable
arp timeout 14400
nat (inside,outside) source static orange interface service RDP RDP
nat (inside,outside) source static obj_HQ obj_HQ destination static obj_lex obj_
lex route-lookup
nat (inside,outside) source static guava WAN_173_164_222_138 service JT_WWW JT_W
WW
nat (inside,outside) source static guava WAN_173_164_222_138 service JT_HTTPS JT
_HTTPS
nat (inside,outside) source static guava WAN_173_164_222_138 service RDP RDP
nat (inside,outside) source static guava WAN_173_164_222_138 service SMTP SMTP
nat (inside,outside) source static guava WAN_173_164_222_138 service PPTP PPTP
nat (inside,outside) source static guava WAN_173_164_222_138 service L2TP L2TP
object network obj_any
nat (inside,outside) dynamic interface
access-group inside_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 177.164.222.142 1
route inside 172.29.168.0 255.255.255.0 172.29.8.253 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Guava protocol nt
aaa-server Guava (inside) host 172.29.8.3
timeout 15
nt-auth-domain-controller guava
user-identity default-domain LOCAL
http server enable
http 172.29.8.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set Remote_VPN_Set esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set Remote_vpn_set esp-3des esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto dynamic-map outside_dyn_map 20 set ikev1 transform-set Remote_VPN_Set
crypto dynamic-map outside_dyn_map 20 set reverse-route
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 173.190.123.138
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5
ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ES
P-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.168.1.0 255.255.255.0 inside
telnet 172.29.8.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside vpnclient-wins-override
dhcprelay server 172.29.8.3 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
group-policy ABCtech_VPN internal
group-policy ABCtech_VPN attributes
dns-server value 172.29.8.3
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPN_Tunnel_User
default-domain value ABCtech.local
group-policy GroupPolicy_10.8.8.1 internal
group-policy GroupPolicy_10.8.8.1 attributes
vpn-tunnel-protocol ikev1 ikev2
username who password eicyrfJBrqOaxQvS encrypted
tunnel-group 10.8.8.1 type ipsec-l2l
tunnel-group 10.8.8.1 general-attributes
default-group-policy GroupPolicy_10.8.8.1
tunnel-group 10.8.8.1 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 remote-authentication certificate
ikev2 local-authentication pre-shared-key *****
tunnel-group ABCtech type remote-access
tunnel-group ABCtech general-attributes
address-pool ABC_HQVPN_DHCP
authentication-server-group Guava
default-group-policy ABCtech_VPN
tunnel-group ABCtech ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group 173.190.123.138 type ipsec-l2l
tunnel-group 173.190.123.138 general-attributes
default-group-policy GroupPolicy_10.8.8.1
tunnel-group 173.190.123.138 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 remote-authentication certificate
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect pptp
inspect ftp
inspect netbios
smtp-server 172.29.8.3
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:6a26676668b742900360f924b4bc80de
: end

Hello Wayne,
Can you use a different subnet range than the internal interface, this could cause you a LOT of issues and hours on troubleshooting, so use a dedicated different Ip address range...
I can see that the local Pool range is included into the inside interface Ip address subnet range, change that and the related config ( NAT,etc, ) and let us know what happens,
Regards,
Julio
Security Trainer

Cisco VPN client and License

Hello,
We have a Cisco ASA 5520 with the VPN PLus License and 8.04 IOS installed, we want to set up vpn access to our users. We can use the cisco VPN client which works on WIndows Platform, but we also have MAC OS 10.7 which works only with Cisco Anyconnect.
I am a little bit lost with all the client and the license, actually we can't setup more than 2 vpn session with an Anyconnect client installed on MAC or Windows. The authentication is by Certificate, the first two connect fine, but the third one don't connect and prompt for a username / password.
I joined a SH VER of my ASA, if anyome can tell me what is wrong on the license or perhaps it's a configuration problem?
Thanks a lot for the answer.
Mathieu.
fw-eps-02# sh ver
Cisco Adaptive Security Appliance Software Version 8.0(4)
Device Manager Version 6.4(1)
Compiled on Thu 07-Aug-08 20:53 by builders
System image file is "disk0:/asa804-k8.bin"
Config file at boot was "startup-config"
fw-eps-02 up 1 hour 36 mins
Hardware:   ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is c84c.75da.9a58, irq 9
1: Ext: GigabitEthernet0/1 : address is c84c.75da.9a59, irq 9
2: Ext: GigabitEthernet0/2 : address is c84c.75da.9a5a, irq 9
3: Ext: GigabitEthernet0/3 : address is c84c.75da.9a5b, irq 9
4: Ext: Management0/0       : address is c84c.75da.9a5c, irq 11
5: Int: Not used            : irq 11
6: Int: Not used            : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs                : 150
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Enabled
Security Contexts            : 2
GTP/GPRS                     : Disabled
VPN Peers                    : 750
WebVPN Peers                 : 2
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions            : 2
This platform has an ASA 5520 VPN Plus license.
Serial Number: JMX1433L0Y3
Running Activation Key: 0x3a17c153 0x8c141630 0xe0f3b5d4 0x86044ccc 0x47193392
Configuration register is 0x40 (will be 0x1 at next reload)
Configuration last modified by mgeffroy at 15:33:11.409 CEST Mon Jan 23 2012
fw-eps-02#

why don't you use built-in client in mac osx? it supports certificate authentication also.
another solution would be to buy additional ssl vpn licences: there is a limit of two ssl vpn sessions by default.
Sent from Cisco Technical Support iPad App

Mac Lion and Cisco VPN client problems

I just installed Lion 10.7 on my iMac and can no longer use the downloaded Cisco VPN client to connect to Microsoft Remote Desktop and access the PC in my company's office. When I try to launch the VPN client I get Error 51. I used to be able to enter a command in the Terminal as a workaround to use the VPN client when that happened, but that no longer works. I have tried booting into 32-bit mode; doesn't work. I tried to use the Cisco client built into Lion using settings provided by my company. When I try to connect I get the following message: "The negotiation with the VPN server failed. Verify the server address and try reconnecting."
I have searched the web looking for a solution. My company's tech department is stumped; the Apple Geniuses haven't been able to help. Does anyone have any ideas how I can use either the downloaded Cisco VPN client or the client built into Lion?
Sent from Cisco Technical Support iPad App

Here is the link which you can use to configure the inbuilt VPN client in MAC Lion.
http://glazenbakje.wordpress.com/2011/07/28/how-to-create-a-cisco-vpn-connection-in-apple-mac-os-x-lion/
Make sure you configure the attributes correctly.
Secondly the inbuilt VPN client code of Lion is made in collaboration with Cisco so there will not be any issues of compatibility.
Cheers,
Rohan

Pre-Configured Cisco VPN Client install

Similar Messages

Maybe you are looking for