Pre-Hire form ( HRASR_DT)--- Create back-end service+ByPASS EE+read OM Data

Hello,
       Weu2019ve created a pre-hire  Form/process and we want to achieve the following . Any help will be appreciated !
- We have to By pass employee and need to select Pre-Hire process directly  ( how to by pass employee )
- We need to read vacant position in the system OM side and filled up the value ( We are on EHP3 and yes we donu2019t have SAP_PD) .
- After we select the vacant position , it should automatically populate "Display onlyu201D fields such as Pers.Area/subarea,Job key,compnay code,org unit and few more fields from 1nnn infotypes with their text . ( e.g. 1000,1001,1002,.....10nn).
- We are entering Fname and Lname and we want to update IT105 .
I would assume for pre-hire weu2019ll be having some dummy number with R/3 existance , Otherwise how we are going to update IT0105 .
I understand I have to create once service to read data from OM side . I am working on it .
Thanks,
SK

I tried it also but no luck . I noticed that when I am debugging there is no Pernr .  Is it wise to assume that we need an employee number in order to see vacant positions for a manager? I am thinking to give employee number in debugging mode and see what will I get this time.
if you look at OSS :Note 1305199 - Correction in generic service s_mgrs_positions. it says "A process is configured using HCM Forms and Processes, which uses generic service S_MGRS_POSITIONS for displaying field PLANS (Position). The field PLANS is having value help and the result for which is not coming correct. Example: Consider a process Org Change for employee Y is started by a manager. Lets assume there are four positions A, B, C and D under manager, out for which position C and D are vacant. When the manager wants to assign new position to employee Y using value help, then all the four positions are shown which is not correct but only vacant positions i.e. position C and D should appear in value help result."
It talks with the reference of an employee .. Does that mean in order to read positions , we need an emplyee ?
Thanks,
Saquib

Similar Messages

  • Adobe for MSS PCR forms with 46C back-end???

    Hi all,
    A quick question - is it possible to use Adobe document services for PCR forms when the back-end R/3 system is 4.6C? Or do we need to be on Enterprise or ERP?
    From what we've seen it appears that the ISR functionality in 46C is not enabled to allow selection of an Adobe form - thus ruling this form option out for 46C PCRs, meaning we'll use JSP forms instead.
    Can anyone confirm whether this is the case, and/or provide details of what they have done for PCR forms in 46C?
    (we do have a WAS 6.40)
    Many thanks
    Ross

    Hi Markus,
    Your response does not line up with information that I have found on SDN:
    10. Can Interactive Forms work within, for example, an SAP R/3 Enterprise or 4.6C system? Is it alternatively possible to run an external SAP Web Application Server 6.40 instance with a lower-release SAP system?
    Interactive Forms is shipped as a part of SAP Web AS 6.40. SAP Web AS 6.40 can be connected to lower-release backend systems to exchange data (using RFC).
    If you want to use forms in interactive scenarios, you can use technologies such as an RFC connection to exchange data between your application system (for example, SAP R/3 4.6C) and the SAP Web AS 6.40, which includes the required Adobe technology.
    If you are working with high-volume printing scenarios, consider that the customization of print forms is optimized for use within SAP applications.
    This means:
    ·At design time, you create relations between application data and form objects based on a common SAP dictionary.
    ·Form templates are available within their corresponding SAP applications. Templates are delivered by SAP only as part of an application.
    ·Performance is optimized for bundled systems, i.e. an SAP application system and its technological platform.
    SAP recommends that customers
    ·Use the same system for application and form printing services in high-volume scenarios
    ·Work with SAP-delivered form templates in the corresponding application. (If you use SAP NetWeaver for form printing services only, you will need to build your scenario from scratch.)
    Please note: If you are planning a high-volume printing project using SAP Web AS 6.40 and an existing, lower-release SAP solution, please turn to your SAP consulting contact for detailed guidance.
    If I am reading this correctly, you just need to install WAS 6.40 with the Adobe Services on it and then cerate an RFC to the 4.6 SAP system. Is this correct?
    Regards,
    Todd

  • SRM back end service PO not showing NAVS value in Item condition

    Hi,
    We are on classic scenario.When PO for services created in backend from SRM, in item details view under conditions,NAVS value seen as '0' but at service level it shows the correctly calculated value for NAVS.
    When PO crrated in ECC dierctly for service it correctly shows up NAVS value both at item level under condition tab & also in service condition
    Any suggestion
    rgds,
    arjman

    requirement closed

  • Class for Back-End Service

    Hi,
    Can someone please let me know what are the classes that are available for SAP_PA and SAP_PD. Since this is a standard service i am not able to find out the classes.
    Thanks.
    Regards,
    Sriram

    Refer to my webolg where i explained the relation between helper class and model class in Web Dynpro.
    <a href="/people/monalisa.biswal/blog/2006/09/03/changing-java-bean-model-class-in-web-dynpro:///people/monalisa.biswal/blog/2006/09/03/changing-java-bean-model-class-in-web-dynpro
    Can u explain your problem in detail?

  • Why can't I save the form I created in Acrobat XI as a Reader Extended PDF?

    I created and saved the document just like I have always done, with form and signature fields.  When I click file>save as>reader extended, it let's me go through and name a new verison of the file, but then says "This document cannot be saved as reader enable."  It gives no reason.  If I can't save it as reader enabled, as I've done in the past with every single form, I'd like to know WHY so that I can fix it. 

    I have run into this issue at times too. If you have the original document that you used to create the form saved in a folder in Windows Explorer, try closing Windows Explorer before saving the document with reader extended properties enabled. Sometimes this works, sometimes it doesnt. . .

  • HCM Process and Forms - Create and End record using the same form scenario

    Hi All,
    I have the following requirement while using HCM Processes and Forms: Using one form/scenario I need to both create a record or be able to end a record for infotype 841. When looking at the back-end service SAP_PA I have operations Create, Change, Change without delimiting and Delete. My requirement would be to do both a create and a delete I guess, but these two can't be selected at the same time while configuring the form scenario.
    I was thinking about doing somethign with the startdate and enddate instead of using the effective date. But I have no clue how to do that.
    How would this be possible?
    Thanks,
    J

    You are correct in assuming that you cannot have a create and delete on the same infotype. The config will not allow it.  Instead, configure the create and then do the delete via a call to you own method in the workflow or via the advanced generic service
    Cheers
    Ian

  • Back-end communication error for r/3 parameter search

    Hello everyone,
    Have been facing this problem for sometime now.When i was clicking on <b>'binoculars/search'</b> find to check for account assignment on web gui,i was getting this error "display not possible...inconsistency in input help" error.
    I did configuration setting in 'define back-end' system(defined the last column of rfc destination), and the error disappeared and is working fine in sandbox.
    Now when i do the same in development system,'inconsistency' error no longer pops up but another one pops up saying <b>"error while communicating with the back-end system..inform system admin."</b>
    Just to let you all know,<u><i><b>i am able to create back-end documents</b></i></u>...it is just when i am trying to use "binoculars/find" in account assignment...the 'backend communication error pops up.
    I have tried everything possible..checked all attributes..everything is fine.
    Can someone assist me?I must be missing something very simple...plz suggest.
    Full points guaranteed:))!!!
    Priya

    Priya-
    Are you certain the RFC destination you have defined for search helps has proper authorizations?  See OSS note 656633 - <a href="https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012003146900000120122003">OSS 656633</a>
    Regards-
    b

  • Issue connecting SRM 7.01 to a R/3 4.5B back-end

    Guys,
    I need your help with the following. We are currently trying to connect a SRM 7.01 system to a R/3 4.5B back-end. We almost got everything working except for a small problem, maybe you can help. We are using the classic scenario and are creating purchase orders in the back-end based on a SRM SC.
    First question did anyone successfully connected a SRM 7.01 system to a R/3 4.5B back-end?
    The problem we are encountering is as follows. In customizing in SRM I have selected system type R/3_4.5B as the back-end system type in u2018define system landscapeu2019.This causes for the determination of driver FM B45A_PO_CREATE when SRM wants to create the PO in the back-end (BBP_PD_SC_TRANSFER  ).This action succeeds because the PO is created in the back-end.
    However, the next action of BBP_PD_SC_TRANSFER  is to read the data again from the back-end via FM B45A_PO_GETDETAIL. This synchronous call is done in order to update the SC status in SRM and create the linkages in BUS2121. This last action fails, because at the time the get detail Bapi is executed by SRM, the EKKO table in the back-end is not yet up to date and error u2018W5 107 purchase order does not existsu2019 is issued by the BAPI_PO_GETDETAIL in te back-end. This causes the SC in SRM to get status I1112 (error in process). Even though this status is issued in SRM, the PO is available in the back-end without any errors if I check this  via ME23.
    What I see is if I debug the SC transfer process and wait 1 or 2 seconds between the B45A_PO_CREATE and B45A_PO_GETDETAIL. The issue is not there. In this case it appears that the EKKO table is updated on time in the back-end and the B45A_PO_GETDETAIL can be processed in SRM without problems in order to update the SC status. I get status I1113 follow-on document created in this case.
    Thus my conclusion is there is a timing issue when connecting to a R/3 4.5B system. Does anyone know a solution. Our thought goes to a small enhancement in the B45A_PO_GETDETAIL FM creating a timer to wait a second before the execution and fetching of the data. I tried it and it worked. But of course I prefer a standard SAP solution. Did anyone experienced similar behavior? Or knows a standard SAP solution to this problem?
    Appreciate your help.
    Best regards,
    Skander

    Hi Surender,
    The code changes in this note only apply if the system type is u201CERP_Xu2019u201D. This is not the case over here, we are trying to connect to a R/3 4.5B system.
    Some additional info, we have multiple back-ends connected. All ECC back-end function correctly and for these we do not have the problem. Only for the very very old R/3 4.5B system.
    Any way I tried the note but no luck. This because of the above.
    Thx.

  • Which BW variable is used for date(range) when creating a portal service

    Hi,
    Can any one please let me know which BW variable is to be used for date(range) when creating a portal service for searching based on dates.
    Thanks
    Abhai

    Hi Arun,
    its just a portal service which would be called when  searching a document created on a particular date or betwwen a range of date.so what i require is which BW variable to be used when handling range.As for variable technical name we use VAR_NAME_I  and for single value variable we VAR_VALUE_EXT_I
    in the similar manner i want BW variable to be used for range of values.
    Thanks
    Abhai

  • Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

    Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

    This forum thread appears to point towards the problem.
    Re: Unable to Switch Audio Sync Settings

  • Pre-populated in user create form

    Hello there,
    I want to have user create form that displays some pre-populated fields in Access Manager. I have added the new fields and can see on the user create form but I want to populate these fields with the values from database or some other resource. Any idea how can this be done?
    Thanks in advance.

    There are various ways this can be done. One way is to use a back-end application to pre-populate a copy of the PDF with the data and then serve it to the user, but that is quite complex to implement. Another way would be to use parameters in the URL to do it. That can be done more easily with a script.

  • How to create constrained or unconstrained Kerberos and know whether the back end is constrained or unconstrained Kerberos?

    Hello Community
        I am considering Kerberos Authenication but there seems to be
    2 kinds of Kerberos: constrained and unconstrained.
        Since when creating Kerberos you are only offered things like "Negotiate\Kerberos"
    Or "Negotiate" or "Setspn" the question is how do you create a constrained
    or unconstrained Kerberos and since the back end has to match how do you
    do you know whether the back end uses constrained or unconstrained Kerberos?
        Thank you
        Shabeaut

    Kerb is used for one of several scenarios:
    - connecting SP to SQL databases, which provides assurances around the connection between the SP service accounts and the SQL service accounts
    - connecting SP to external systems (such as SQL databases, which may be used by BCS, Excel, PerformancePoint, PowerPivot, etc).
    Constrained Delegation is not necessary for SP to use Kerb when connecting to SQL. it IS necessary for SP to talk to external systems (since Constrained Delegation is also known as "Kerberos with protocol transition", since it's
    transitioning a Claims based auth token to a kerberos based auth token).
    The difference is a setting in AD's Delegation tab, for the service account that will be collecting the users' login (presumably the webapp), and for the service account that will be performing the double-hop (presumably the service apps)... in addition
    to the kerb setting, you also need to specify EXACTLY which endpoints can be reached using the Kerb + CD... unconstrained delegation (the default) allows the Kerb token to be passed anywhere... constrained delegation only allows the Kerb token to be used
    by the places you specify (in the delegation tab)... such as the SQL server that the PerformancePoint scorecards will be querying.
    Links:
    - Microsoft's Kerberos guide : http://www.microsoft.com/en-us/download/details.aspx?id=23176
    - more links : http://www.sbrickey.com/Tech/Blog/Post/SharePoint_Troubleshooting_Kerberos_and_External_Data_from_Excel_Services
    - some health analyzers to find problems and recommend solutions : http://sdssharepointlibrary.codeplex.com/releases/view/92022
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Pre-load form values before create a new Support Request

    We are trying to send some values to the CRM from our system, So a User just need to click a button and He will see the CRM with some pre-loaded values, and then he will create the case after completing other fields.
    Is possible to send POST - GET values?
    Any suggestion?
    Thanks

    The values are dynamic, so is not possible to use always the same default values.
    Right now we are creating the cases using a web service when someone clic on a link. The main problem here is that our users doesn't complete all the fieds and they close their window. so we have a lot of "cases" created without the entire information. That's why i'm looking a way to complete a form without using a web service (because it creates the cases)
    Best Regards

  • Back end PO from Service Bid Invitations in SRM

    Hello Guys:
    Currently I am facing an issue in the way SRM system works for Service and Hierarchy Service Items. When I create a PO directly from a SC that has Service Items (with or without hierarchy) on CES the PO is replicate to the back end but if I create a similar PO but this time from a QUOT of a Bid Invitation the system does not create the PO copy on the Backend, Does any one of you know if this is normal? why if I create a PO from the SC then the PO is copied to the back end but not if it is coming from a Bid Invitation??
    Thanks
    Hugo

    Hi,
    We don't do Inbound dilevery in Service Procurement. We post service entry.
    As I said there should be some setting  missed in 'SE_SERVICES_PROCUREMENT' XI scenario. You should trouble shoot it.
    As of I remember after posting service entry sheet; confirmation used to get created in SUS.
    Regard,
    yaniVy
    reward if helps

  • Creating a connection between the GUI and a program's back end

    I have created a program (over 50 classes) and am currently a little confused as to how I should connect the back end of my program (the real functionality) to my front end (the GUI). Currently I am thinking about using a list of event listeners in my back end that will announce when certain events have completed and thus front end can handle the updates accordingly.
    But I want to ensure that the back end doesn't "know" about the front end. In other words, I would like to ensure that the back end and the front end are as independent/modular as possible.
    Can anyone make some suggestions besides event listeners?
    Thanks,
    Timmers

    From what I am able to ascertain from your post, you would advocate using EventListeners in the back end (in same VM) to inform the GUI of changes?
    Is this the commonly accepted way of communicating your back end functionality to your front-end (GUI)?
    I've read that all EventListeners are part of a single thread. So what happens if two events occur simulataneously in the back-end. Do those events get queued or do some of them get lost?
    Thanks,
    Tim
    If the back-end changes state asynchronously to the
    front-end GUI (ie does work in background threads and
    then notifies the front-end when something happens),
    then you should make it send events when this happens.
    The basic concept is the same for CORBA, RMI, JINI,
    or running everything in the local VM.
    To do this you define a set of events (or maybe you
    can use the java.beans.PropertyChangeEvent) and
    listener interfaces. The front-end then registers to
    receive events (probably via an addXXXListener()
    method in the back-end). You would have to have a
    class (or classes) in the front-end that implemented
    the event listener interfaces to receive the events.
    If you are using a distributed technology (CORBA, RMI,
    JINI, ...) the concept is the same, but the event
    mechanisms are slightly different.
    To notify the back-end of state changes in the
    front-end you probably can just do plain old method
    calls from the front-end to the back-end.

Maybe you are looking for