Pre-Loading Configuration File

Hi Guys,
I've went thru the thread and noticed some had already asked
the following question, yet I didn't see any satisfying answer.
I'm using mxml components. Some use an external configuration
when being initialize (it's external so I can change parameters and
not recompile every time).
Hence - that xml file must be loaded prior to any component.
Is there a proper way in flex which i can determine the
order? Or is there a way in which I can specify to the application
to load a configuration file prior to any other action?
Solutions I've seen here:
* write it all from scratch using AS3 - sorry, thanks... Not
an option :)
* put your application under another component (like canvas)
and load the config file in the main app and only then the canvas:
Guys - could you find uglier solution? :)
* use the initialize event : not working.. Since it's
threaded - by the time the config file loads... All of the
components have been loaded too.
So, I'd be so happy if someone here would start his answer
with: "So easy man... So simple... just do this... and that... :)".
Crossing fingures :)
my Email

In addition to the initialize event, there is a preinitialize
event. Because server
calls are asyncronous you will need a custom preloader so you
have control as to when you let the app continue. Check out the
following article (from cflex.net)
on using a custom preloader.
http://br.sys-con.com/read/255823.htm
We use this method so we can load a catalog of labels and
messages before the main application components are
displayed.

Similar Messages

Failed to load configuration file for the workflow

There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I tried opening his workflow and got
the error "Failed to load configuration file for the workflow."
Any ideas?

Hi Carltonw1,
Based on your description, I recommend to verify the things below:
Clear the SharePoint Designer cache and then open the workflow.
Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
Ask the user to create the same workflow and associated with another list to see how it works.
Check the ULS log for more detailed error message.
To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How to load configuration files with to TestStand

Hello,
I need an expert advise on setting up Teststand environment. I am developing a generic tester that will eventually support multiple product lines. The PXI equipment is common but the Pin assignment will change from product to another. So, I was thinking to have a configuration file (xml, excel, .csv...etc) that defines each product line. The configuration file will contain all the pin routing, like which pin is connected to which NI Card channel and fault insertion unit. My thought was to load this configuration file to the Teststand environment before starting a series of tests. I had in mind using XML files and use a labview parser to extract the data and write it to Teststand variables. My question is:
Is this the best practice for this approach ? Is there a better method ? Can I load data into Teststand first and hold the data in Teststand while testing a bunch of UUTs. I do not want load this file at the beginning of every Test, just once when opening Teststand.
I appreciate any advise on this.
Thanks,
Ayman

I'm using .ini file with configuration information and a startup sequence what read this file, configure the system and then run selected tests. Selected tests list is in the .ini file as well. Configuration info is passed to subsequences as a parameter or "propagate local".
I disagree with the idea of creating a separate sequence for each product, this solution is not scalable.
Message Edited by skof on 12-24-2009 09:37 PM
Sergey Kolbunov
CLA, CTD

Pre-load .flv file

Hello again,
Seperate question:
I have created an SWF file that streams an FLV file.
What I would like to do is have the SWF load the FLV all at once at the beginning (the way a flash app might pre-load the interface). Is this possible?
This way, when the SWF starts playing, the FLV will be loaded already, and will not have to buffer during playtime.
The FLV is only 300KB, and is an element in the interface itself, so I can't have it stuttering.
Thanks in advance!

attached to the first frame where your component exists and its contentPath is defined, disable autoStart and, if flv is your component instance name, use:
flv.play();
flv.pause();
this.onEnterFrame=function()[
if(flv.bytesLoaded>=flv.bytesTotal){
delete this.onEnterFrame;
flv.play();

Failed to load configuration file

Hi,
I've been trying to install the trial version of FrameMaker 9 on Vista Home Premium, but as soon as I start the installer, I get the following error message:
I then get Select Setup Language dialog box, but the drop-down list is empty. I do have a BootstrapperConfig.xml file in the Installer Resources folder, and the installer does work on my XP machine. I couldn't find any report of such an error anywhere. Note that, oddly, the XML file looks like a binary file...
Does anybody have an idea?
Thanks!
Raph

We did find a solution for our problem, but this was on a company PC with AD company policies. When all company policies was removed before installing, everything went perfectly
It is a bad solution to remove policies, but I did work, and maybe I will give you an idea on what to look for in your situation
/Christian

Failed to load configuration file: BootstrapperConfig.XML

Is there any way to install Framemaker 9 without running the setup.exe? I am trying to install Framemaker 9 in our Citrix farm as this was the version we were informed which was supported under Citrix. The farm is running XenApp 5.0 on Windows 2008 64 bit. I have built three servers and two of them installed fine. The third has been causing me a lot of trouble. A clean build of Windows 2008 and I can run the setup. But as soon as I install the Terminal Services role I hit the listed error. I dont' understand what's causing it, using Process Monitor to look at what setup.exe is doing when it's failing isn't showing any issue. It's accessing and reading the file fine.
I can't run the MSI without going through setup.exe and I can't get setup.exe running. I have 5 other Citrix servers to rebuild but I don't want to start them until I get this sorted as all the applications are running properly on the servers with Windows 2003 32 bit and Presentation Server 4.
Where can I go, what can I do, what is that installer doing which is failing to read the bootstrapperconfig.xml file, can I install without using setup.exe. I'm running out of ideas I've rebuilt this server half a dozen times now trying to isolate the problem. I've even tried streaming Framemaker rather than installing and that's not working properly either. Issues with the licensing service.
thanks
Eric

yes, that message has been up for a looong time. They've been having problems with the list over the past few weeks -- I just checked and the last Framers digest that I seem to have gotten was last Friday the 30th, and the links to the list and archives are down now, too, bummer!
Ordinarily you could also go to this link to register for the list:
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.frameusers.com/mailman/listinfo/framers
What a pain -- I hope that it comes alive again soon.
Well, another resource is the "Free Framers" list, run by the very obliging Omsys folks, more info here:
http://www.omsys.com/cgi-bin/dada/mail.cgi/list/framers

Pre-loaded Ring Tones Silent after installing Tone Room

I recently installed Tone Room and now my ring tones are all silent. I uninstalled Tone Room (I had never even tried one of their tones) but I still all I get now is vibrate even though I've set my notification profile to Loud. I went into the pre loaded ringtones file and even though they are all there they don't have any sound. They are all listed at 0:00 duration.
Can anybody suggest how I can retrieve the original ringtones.? If I do a restore from a previous back-up what file should I restore?
Thanks in advance
Madrone
Solved!
Go to Solution.

I just solved this problem by doing a soft reset.
Madrone

Removal of Pre-Loaded Songs on 5310 Xpress Music

All,
Could anyone help me in removing the pre-loaded music files that come with the Nokia 5310 Xpress Music phone (and no doubt countless other handsets too).
I don't particuly like them and I can't seem to exclude them from playing when the music player just going through my tunes (that is when it's actually playing and not giving me the white screen of death).
Apologies if this has been posted else where, I did try and find another thread using the search function to no avail.
PatriBoo

I found that I could delete the music that came with phone, if I deleted it in the album folder instead of the actual song, so just scroll through your album titles until you come to one you don't recognise, and you will be able to delete it easily on your phone.

Unable to load new information from configuration file /var/ldap/ldap_clien

Hi all,
When I run the command "ldapclient init", I got the error message:
# ldapclient init -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=ca -a domainName=example.ca -a profileName=UserProfile -a proxyPassword=pwd 10.1.10.50
Unable to load new information from configuration file '/var/ldap/ldap_client_file' ('Unable to open filename '/var/ldap/ldap_client_file' for reading (errno=2).').
Any idea?
Thanks a lot for your help!

Does the profile UserProfile exist on your LDAP server?
Do the logs on your LDAP server show access problems?
Try using -v to get more verbose output

How do I configure DW to open and load a file?

I have DreamWeaver CS5 running on a Mac. Whenever I double-click to open a DreamWeaver compatible file (such as an HTML file), if DW is not already open, DW launches but does not load the file. Once DW is launced, I can double-click the file and it will load. How do I configure DW to open and load a file together?
DW: v11 b 4993
OS X: 10.7.4 (11E53)

HTML files are normally configured to open in a browser. The default on a Mac is to open the file in Safari.
You can right-click the filename in the Mac Finder, and select Open With > Dreamweaver CS5 from the context menu.
Alternatively, select an HTML file in Mac Finder, and press Cmd+I to open the Info panel. In the Open With section, select Dreamweaver CS5 as the default program, and click the Change All button.

Pre-load servlets from a war-file

Hello,
          is there a way to pre-load a servlet (or execute any other code)
          at server startup, when the application is deployed as a .war-file?
          I know how to use the weblogic.servlet.utils.ServletStartup and
          the weblogic.system.startupClass... property, but these two
          seem to require that the servlet (or application class, respectively)
          are found in the servlet classpath (or the weblogic.class.path,
          respectively), so these mechanisms cannot peek into war-files to find
          the class, am I right?
          The page http://www.weblogic.com/docs51/classdocs/webappguide.html#dtprops
          says:
          <load-on-startup>load_order</load-on-startup>
          (Optional) This property is not honored by WebLogic Server in this release.
          Is this still valid?
          Is there a workaround?
          When will this element be supported?
          Concerning a possible workaround, I have read:
          > Subject: Re: Pre-load
          > Date: Fri, 19 Nov 1999 14:38:41 -0500
          > From: Jeff Martin <[email protected]>
          > Newsgroups: weblogic.developer.interest.servlet
          > Tom Gerber wrote:
          > >
          > > How do you get your startup class to start? Do you have a
          > > script which calls your startup class via a URL? Or is
          > > there a setting in the weblogic properties file for it?
          > Starting WebLogic in unix is a shell script. Just add a line to run your
          > preload program (e.g. java Preload).
          > Some unixes have utilities to get a web page from the command line (to
          > do shell parsing on it); create a series of calls, one per page.
          That sounds like a possibility, but I do not understand exactly.
          1) Where do I have to put the line into the shell script?
          2) Which line is it?
          3) What is the UNIX utility?
          I am using WL 5.1 (evaluation) under Solaris.
          Any help appreciated,
               Oliver Matz
          | _ \ / \ | __)( ) Oliver Matz, Engineer
          | _/( () )| __) | | fon: +49(0)40/60990-0
          |_| \__/ |___) |_| fax: +49(0)40/60990-113


Yes you can load a java applet form a jar file.
Here is the code for internet explorer.
<body>
     <table align="center" border="1">
          <tr>
               <td>
                    <object classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" width="10" height="10" codebase="/plugin/">
                    <param name="code" value="XXX.class">
                    <param name="archive" value="XXX.jar">
                    </object>
               </td>
          </tr>
     </table>
</body>
</html>
Just replace the XXX.class with the class containing the init() method and XXX.jar with the jar file.

Can I load a configuration file in MAX 3.1.1 programmaticaly?

Hi,
I stored a lot of configuration files for all the different projects we used. How can I load theese files programmaticaly from LabVIEW or from TestStand?
Thank you in advance.
C. Dietz
Test Engineering
digades GmbH
www.digades.com

I use the following work around in Labview:
I have many different camera's which I wish to use with one program.
I have an imaq 1409 PCI.
By default it uses img0 to aqcuire images.
But you can also select a different Interface name in your program.
So I have created an interface description file for each different camera.
for instance "mycamera.iid"
and a corresponding camera description file
for instance "mycamera.icd"
Now by calling vi's like imaq init with a string named "mycamera" as Interface Name, the program uses the mycamera.iid file.
In MAX I made sure that mycamera.iid has mycamera.icd as default channel 0, so this also gets selected.
If you work with something else than camera's please specify, but it should work the same way.
good luck,
Arend

MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file. SQLIService100 - event id 274

window 2008 R2 server ---- after installing SQL 2008 R2 then applying sp2 / sp3 I noted a warning -
Note this server had SQL 2008 R2 uninstalled previously.
MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file.
SQLIService100 - source
event id- 274
user - N/A
Task category - service control.
Do we need to fix something and how do we fix this warning event?
dsk

You could search online for this warning. I was able to find http://superuser.com/questions/346264/event-log-warning-registry-setting-specifying-configuration-file-does-not-exist
where the fix is "in your registry, go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTS\ServiceConfigFile
or
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\ServiceConfigFile
if value is empty then add in:
C:\Program Files\Microsoft SQL Server\100\DTS\Binn\MsDtsSrvr.ini.xml"
Arthur
MyBlog
Twitter

Failed to load the configuration file for the workflow

Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
in working condition and it works pretty right.
But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one I used SPD and all the time
Im using the same pc.
Any ideas will be appreciated.
Cheers, R2C3 ----------------------------------- starting sharepoint :)

HI
Maybe you have permission problem or there is invalid xoml murkup.
To verify this from SharePoint Designer use the following steps.
In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
1.Next select the plus sign of the workflow in question to expand it
2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
3.Right-click on the page, and then select Verify well-formed XML
4.Correct any errors and save the file
5.Reopen the workflow to test
Also double check that you are using SPD with the same credentials you created workflow
Hope this will help.
Regards,
Marcin

O2cb_ctl : unable to load cluster configuration file while RAC setup.

OCFS2: unable to load cluster configuration file
Hi,
I installed OCFS2 successfully.
I successfully install 3 RPMs.
I am getting error while running ocfs2console to do cluster configuration.
I tried to run this manully using "o2cb_ctl -C -n NODENAME -t node -a number=NODENUM -a ip_address=IPADDR -a ip_port=IPPORT -a cluster=CLUSTERNAME "
this commnd. but getting error as
"o2cb_ctl: Unable to access cluster service while creating node Could not add node "
Then I edited this file manually and copied to another nodes using SCP. Then tried to use o2cg_ctl utility as
# /etc/init.d/o2cb offline ocfs2
# /etc/init.d/o2cb unload
# /etc/init.d/o2cb configure
Configuring the O2CB driver.
Next, I configure /etc/ocfs2/cluster.conf:
cluster:
node_count = 2
name = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 1
name = ocvmrh2053
cluster = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 2
name = ocvmrh2051
cluster = oracle
Next, I try to load ocfs2 modules by command: o2cb load - everything messages is OK
And I try switch ocfs2 cluster to online (by o2cb online oracle), write this error message:
Starting cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
Stopping cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
I think both errors i get are due to same issue. Please kindly reply if anyone having idea.
Thanks.
Please anyone can help me to resolve this.
Message was edited by:
user596035

provide output of this command from all OCFS2 nodes:
ls -l /etc/ocfs2/cluster.conf
Regards,
Martin

Pre-Loading Configuration File

Similar Messages

Maybe you are looking for