Premiere only recognizes 15 seconds of my 15 minute shot!! =[

Okay, so I'm editng on a PC, Windows 7 64 Bit, Adobe Premiere Pro CS5. I love everything about windows 7 and CS5.
I have a project in premiere that I was working with in CS4, i opened it in cs5 and everything is working just as it was in cs4.
I rendered out the film into 5 sections, than i up-rezed each section in Cineform Prospect HD and brought them back into cs4 to lay them on the time line and color correct.
Might sound a lil weird to do it like this, but its already done. lol.
But my problem is, the first 4 sections work fine and the 5th one doesnt.
On the timeline, the 5th section is supposed to be 15 minutes long. My computer recognizes it as a 15 minute video, but in Premiere it only recognizes it as about 15 seconds and has grey bars along the video on the timeline.
Here is a screenshot of my problem:
Can anybody please help me???
-Andrew L. Jackson
[email protected]

Thank you for the reply.
So, I checked the differences between the 2 shots, and im not too sure what is wrong.
Maybe u can tell? Here is a screenshot:

Similar Messages

HT203200 I only got 30 seconds of a 5 minute song. When I checked my availible downloads, it said I didn't have any. Refund?

I just purchased a song. The song downloaded, but I only have 30 seconds of a 5 minute song. There are no songs that haven't been downloaded when I choose that option.

Delete it and redownload it:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I just bought an album and some of the songs are only playing 3 seconds of a 4 minute song. What do i do?

I just bought an album and some of the songs are only playing 3 seconds of a 4 minute song. what do i do?

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

HT1725 i tunes thinks it downloaded the hole song but it only plays 4 seconds of a 3 minute song

I purchased a album and i tunes started downloading and all the songs but one on the album downloaded. the problem is i tunes shows that it did download but i only got 4 seconds of the song. How do I download the song again without purchasing again?

Delete the current copy, close iTunes, reopen, then redownload from your purchase history - iTunes Store > Purchased - or use the cloud download link from the music section of your library.
tt2

I purchaced A TV series on Itunes and I can only view 30 seconds of the show.

I bought a tv series and can only play 30 seconds out of 45 minutes....please help.

I am having the same issue. It shows the entire series purchased. I downloaded episode 1, no issues. now i am on episode 2. i downloaded it. at 1st i could only hear audio. i rebooted, now i can only see 30 seconds of the episode.
Whats going on?
I've been trying to solve this for an hour. snowed in and need something to watch!!!

HT201272 I prepurchased 4 episodes of The Walking Dead game from my iPhone. The second episode recently became available. Just got an iPad. It only recognizes the first episode. It prompts me to purchase the second one. How do I resolve it?

I prepurchased 4 episodes of The Walking Dead game from my iPhone. The second episode recently became available. Just got an iPad. It only recognizes the first episode. It prompts me to purchase the second one. How do I resolve it?

The following has instructions on how to transfer a phone from one person to another: What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

Ipod recognized by computer for only a few seconds?!

My ipod froze up while it was plugged into the computer. I unplugged it and reset it, but now it keeps showing a folder or a battery w/ an exclamation mark when i plug it into the AC adapter. When I plug it into the computer, it'll show the same icons, but then will be recognized by the computer for only a few seconds flashing the "do not disconnect" screen. Is there any way I can fix my ipod? I've tried to update the software on it, but that doesn't work since the computer only recognizes the ipod for only a few seconds. Any help is much appreciated. Thanks!

Try the instructions in this article; if disk use isn't enabled for the iPod, it will disappear from the computer after the synchronization process is complete.
(20795)

HT1670 Sync iPhone/Entourage will only recognize one of my two iPhones?

I have two iPhones. One I have managed to sync no problem, but the second is just not interested! A friend told me that with iPhone/Entourage will only recognize one iPhone, if so is there anything I can do to sync my second phone?

Hi, Darcie13.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

How do I get the software to only recognize the edited portion?

I uploaded a 17 minute video and edited it down to 2 minutes. I am trying to post it to YouTube but the software still thinks that the video is 17 minutes long. I have changed my YouTube setting to allow more than a 15 minute video but I am still stuck because it won't upload as it thinks it's too long. How do I make it only recognize the edited portion?

flifaflafa
What version of Premiere Elements are you using and on what computer operating system is it running?
Since you are specifically asking about doing this as an upload to YouTube from within the Premiere Elements YouTube feature, let me
give you details as specific as possible for what you asked.
Assuming Premiere Elements 13 on Windows 7, 8, or 8.1 64 bit as the model.
Two requirements are required to export selectively a Timeline segment
a. Setting the gray tabs of the Work Area Bar to span just the segment to be exported
and
b. Having a check mark next the option "Share Work Area Bar Only" in the YouTube export area.
To set the gray tabs of the Work Area Bar in the Edit area, use the shortcuts.
Move the Timeline Indicator to the start of the segment and, as you hold down the Alt key of the computer main keyboard, hit the left
bracket key [
Move the Timeline Indicator to the end of the segment and, as you hold down the Alt key of the computer main keyboard, hit the right
bracket key ]
Any questions or need details specific for another version, please let us know. Principles remain the same - features sometimes
get moved around.
ATR

CS4 v4.1.0 some vob files import only first few seconds

I have a mini-DVD camcorder that creates vob files which I wish to edit in Premiere Pro CS4 v4.1.0.
I find that there are four .vob files on the DVD, one is a chapter index, the other three compose what I recorded.
I am able to import all of the latter three, however, only the middle one includes the full track of 16 minutes. The first and last one import as only about 10 seconds instead of the seven minutes each is.
I tried to work around using DGIndex.exe and MeGUI Modern Media Encoder for the other two, but this only gives me the video, without the audio.
So, either I need a way to rip the audio off the two vobs and hopefully not mess up the lip sync too much or to get the vob files to import correctly into Premiere Pro.
Any help appreciated. This is Windows XP SP3.
Thanks.

Well, there are VOB's, and then there are VOB's. Being a Video Object, they can contain a lot of "stuff." This ARTICLE will give you a bit of background.
Dag's suggestion is one that many use and the conversion program gets high marks from many users.
Good luck,
Hunt

HT1430 iPhone only recognizes one home wifi network but ipad recognizes both

I have two home wifi networks. My iphone only recognizes one wifi which is the slower. Ipad recognizes both. I've turned router off and on and turned iphone off and on and makes no differences. Also ipad used to pick up unsecured wifi networks but no longer does
which I don't want but wonder why that suddenly changed

Hey Dann4ever,
I would follow these steps for when you're unable to locate a Wi-Fi network on your iOS devices:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap i and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
via: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
There are more recommendations in that above article, so if none of those work I would check out the other options within.
Have a great day,
Delgadoh

Target Disk with firewire only recognizes bootcamp!?

Hi there, my MBP will not boot anymore.. it just stays at the apple logo.. I only want to rescue some files I really really need(the rest I have on time machine) but when I try to Target Disk my MBP to another MBP it only recognizes the partition which contains Windows XP..
Does anyone have only a slightest idea of what I can do?

Usually means the OS X volume is inaccessible. You might try reinstalling OS X if possible:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Failing that see the following:
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Lenovo 3000 N200 0769 ERG upgrade memory 1GB- 3GB only recognize 2GB

I bought a Lenovo 3000 N200 0769 ERG with 1GB installed in first slot.
To get the system better work I wanted to expand the RAM.
As the spec's tell a maximum of 3GB should be possible.
Thefore I added a 2GB mem-card.
I expected to see the I would have in total 3GB in use.
Now the system and BIOS tells that only 2GB is in use.
I already checked:
- startup with only 1GB works correct.
- by adding the 2GB card the total value increased from 1 to 2 GB so the card is expected to be correct
+ systems works correct
- only using the 2GB card gives problems, system doesnot recognize RAM at all.
On this forum I see some suggestions to place 2 x 2GB cards and Vista only recognizes 3GB.
Is someone aware that this may be a solution?
Does someone else have an other solution.
Your help is very welcom.
Thanks in advance.

Wow, thank you, what an awesome little tool!
So, I found that these 2 RAM products are compatible with my laptop:
Part Number: CT758799
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-6400
Specs: DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64 •
Part Number: CT699699
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-5300
Specs: DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64 •
I then went to a well-known auction site and found RAM cards from the same manufacturer with exactly the same specs as above but with different Part numbers. Does it have to be the exact part number or do I stand a good chance of it working if it has the required spec? I searched for the exact part numbers and yielded 0 results.
Thanks for all your help on this.

I have 8 gb on my macbook pro, but it sometimes only recognizes 4 gb. Whats going on?

I have 8 gb on my macbook pro, but it sometimes only recognizes one of the banks and thus only 4 gb. I was about to open my Macbook Pro mid 2010 2.66 up but it went back up to 8 gb of ram.
I also noticed that the macbook would go to sleep and not wake up again, sometimes. Not sure if this is related.
I did the usual, resetting the PRAM and the other thing with "shift control option." It didn't work and kept on saying 4 gb.
I woke up this morning ready to break open the mac when it read 8 gb. Great! But the **** is going on. Is that memory slot loose?
My google search and search through these forums were useless, no solutions. One guy tried changing his memory into the two banks, no difference. Sometimes it recognizes bank 1 sometimes it doesn't. Another put his ram in another computer, it's not the ram. Someone suggested the motherboard, then someone said "no way" for some arcane reason.
The only solution that seamed viable was going back to snow leopard, the last great OS. Im on mountain lion, not to shabby, but no leopard.
Problem is that I am out of warranty.
Any suggestion would be helpful.

why don't you try this:
open the back of your Macbook - if you're technically capable...
take the ram out, clean it up with a pencil eraser - blow it out - put them back in, slowly and in a slight angle until they lock into place - make sure they are seated correctly...
restart your macbook - if the same bank is still not detecting - then the issue is your RAM slot...
good luck

My partner and I each have an iTouch and one iMac. Our iTunes only recognizes my iTouch - how do we use two iTouches on one iMac?

My partner and I each have an iTouch and one iMac. iTunes only recognizes my iTouch. How can we use one iTunes with two iTouches.
thanks

iTunes can manage any number of iDevices separately. Be sure each has a different name. You can only connect one at a time. Please get the IPod Touch user guide.

Premiere only recognizes 15 seconds of my 15 minute shot!! =[

Similar Messages

Maybe you are looking for