Premiere Pro CS4 DOES NOT RENDER! HELP

So i took some footage with my Samsung Galaxy SII and started a project. I went into effects and then motion to get rid of the black bars and turn the video the right way around. On the screen at the top left the video was what i wanted, however the top left screen was not exported, what i ended up getting was a the same video turned around.
Can anyone give me instructions or something on how to save the effects you made onto a sequence. this is the first time ive used PPro. All i need to know is how to make the video that i import from my phone have normal video dimensions (no black bars) and be turned the right way around,  and then how to export it. please help.
cheers,
Jordan.

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Similar Messages

  • Premiere Pro CS4 does not import EX1 files longer than 1 hour

    I had to record a long speech and used a Sony XDCAM HD EX1 camera with a 32 Gb and a 16 Gb SXS cards. The speaker paused after 1h 26 min. I stopped the recording and waited until the green light that allows recording the segment came on. Later I recored smaller segments.
    I copied all the recorded files to the PC hard disk ( Intel Quad Core 2.4 Ghz with 3.25 GB RAM with XP Proofessional SP3).
    I used Sony Clip browser to watch the clips and all of them were perfect. Then I opened premiere Pro CS4 4.21 and I wanted to import this 27 GB file. In the media browser appeared only one mp4 file. All the short ones where imported normally but the big one freezed premiere and the only way to close premiere was with the windows task manager.
    I checked again in the Sony XDCAM clip browser version 2.6 and you can see it perfectly. There was a detail, though: in the lower part of the preview window I saw 6 marks. When I checked the file in the disk, I found that the 27 Gb file was separated in 7 parts. Each of them was 3.51 Gb and the last one 2.5 Gb. That means that the file was cut in pieces that were less than 4Gb supposed max file lenght.
    I tried many ways to import and no result. The I used the "export " of the sony clip browser. There is one choice that is "MXF for XDCAM HD". When I chose this item another panel appeared and showed a 1440 X 180 59.94i 25Mbps choice. I took it and after some time it created the 27 Gb file that I could import it normally with 4 audio tracks. But there is a drawback a "media concept" logo appeared to remeber to "buy" the program.
    Anyhow, the question is: How can I import to Premiere CS4 a MP4 file created by a Sony EX1 HD camera whose lenght is more that 1 hour long ?
    Thanks
    Wolfgang

    I think  is the contrary because the clip browser copies all the foleders needed. I got this opinion from another forum that copies into Final Cut:
    "My workflow is to create a hard drive folder for the project, then use Clip Browser to import the clips from the card. I review the clips, labelling them, adding logging notes, setting the status and putting in essence marks as needed (the number of characters available for the essence mark description is fairly limited). I then open FCP, create and save a new project then call up XDCAM Transfer. I select the project folder and it will pull in all the clips. I then filter for OK status, occasionally create subclips then import. The clips come over to the bin, with their names and with the essence marks converted to markers. Obviously there are backups taken - I've not mentioned them."

  • Premiere Pro CS4 does not handle AVCHD Files well.

    Loaded the master collection of CS4 when it first came out.  I had purchased CS4 for the AVCHD file format.  I had no problems using Premiere Pro until I ugraded to version 4.0.1 in March of this year then all AVCHD file selections dissappeared.  Hence, I could not create new AVCHD projects and the existing projects did not fuction properly.  I have been through a series of uninstalls (and deactivations) and reinstalls.  Reinstalls did not work.   Had to delete by renaming the C:\Program Files\Common Files\Adobe\Installers\7e74552a59eaf9fafd13f90894ac9bd to get the reinstall to work.  I have also used Windows Install Clean Up to remove all Adobe CS4 files that the windows "Add or Rmove Programs" did not remove.  When I did get the reinstall to work, Premiere Pro would work for awhile then became slow to the point the project became unusable.  Tried the all upgrades again and again the selection of AVCHD files dissappeared.  I do not need the AVCHD Intra capability.  The last uninstall I just uninstalled Premiere.  I could not reinstall Premiere until I uninstalled the entire master collection than the reinstall of just Premiere succeeded.  Premiere was totally unusuable.
    Has anyone had similiar issues with Premiere Pro and AVCHD files and were you able to resolve the problem?  I am considering removing all Adobe products, including past versions and trying the reinstall again, or create another profile and install just the Adobe products, or - the last resort - reformating my hard drive and starting over again.   I would like to get Premiere Pro working again properly before reformating.
    Previous versions of Adobe have worked with no problems.
    Computer profile:
    Windows XP sp3
    5 hard disks each with 300 mb free
    Intel Quad Core @2.4GHz each
    4 GB of Ram
    NVIDIA GeForce 8800 GTS

    You might do a "this forum" search at http://forums.adobe.com/community/premiere/premierepro_current to check on the revert to trial problem
    I have CS5 so read there, and don't REMEMBER any such complaints
    You do know that CS5 is 64bit only... so you will need to get Win7 64bit... and have a 64bit motherboard?
    The computer I built is linked to in My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0

  • Premiere Pro CS6 does not recognize USB PnP Sound device connected  to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB)   is working with this USB device without any problem

    Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out  integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
    With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
    Your help is highly appreciated. Thanks in advance, Annemarie!

    I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
    I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
    Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
    I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

  • Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

    I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
    Theo Smith

    I sent the screenshot via an e-mail attachment. I wasn't aware  that
    attachments could not be forwarded this way. I will send it again. First  time
    I've utilized this service.
    In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time, 
    [email protected] writes:
    Dvd  burned in premiere pro cc does not fill the screen. Desire a 4:3
    aspect  ratio
    created by Peru Bob (https://forums.adobe.com/people/Peru+Bob)  in Adobe 
    Media Encoder (AME) - View the full  discussion
    (https://forums.adobe.com/message/7264779#7264779)

  • Premiere Pro CC does not open MOD files correctly

    Hi,
    I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
    I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
    So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
    I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
    So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
    Cheers

    Premiere Pro CC does not open MOD files correctly
    That is correct: there is a bug in CC. In CS6 they work correctly.
    Please file a bug report.
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    http://forums.adobe.com/message/5658455#5658455
    search for mod files and you will find one or two other threads.

  • Premiere Pro CS4 won't render my sequences

    Everytime I send a sequence to Media Encoder, it just sits there. And sits and sits, etc. At the bottom it just says "Loading "Gleaner_Shoot.prproj".
    I'm using a 2008 Mac with 8 cores with 16 gigs of ram.
    My footage came from the Canon HV20. I have clips at both 24p and 1080i.
    I'm setting up my sequences to match the clips I'm placing in them.
    One thing of note is I'm really only using 3 looong clips. Since CS4 doesn't do scene detection well. I opted to instead make subclips from the long clips and use those. 2 of them are about 30 minutes long and one is nearly an hour. Could this be the problem?
    Thing is, this happens even when I do a 1-minute sequence test.
    It even happens when I try to use a test sequence which contains only audio.
    I've tried outputting to quicktime and MPEG 2. I was careful to set the export settings to match the sources.
    After a long wait, Media Encoder gives up and I get a warning icon in the status column.  It says this:
    " - Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/FixThrive_1.prproj
    - Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/Fixthrive_1.mov
    - Preset Used: Custom
    - Video: 720x480, 30 [fps], Progressive, Quality 100
    - Audio: 
    - Bitrate: None
    - Encoding Time: 00:01:19
    Wed Dec  3 10:46:04 2008 : Encoding Failed
    The Operation was interrupted by user
    - Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/Thrive2.mov.prproj
    - Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/Thrive2.mov
    - Preset Used: Custom
    - Video: 720x480, 29.97 [fps], Progressive, Quality 100
    - Audio: 
    - Bitrate: DV/DVCPRO - NTSC
    - Encoding Time: 00:00:15
    Wed Dec  3 10:50:39 2008 : Encoding Failed
    The Operation was interrupted by user
    - Source File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/_Front Flash/FLASH/SOURCES/BREVITY RENDER READY.mov
    - Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/_Front Flash/FLASH/FLASH FILES/brevity_render_ready.flv
    - Preset Used: Custom
    - Video: 903x250, Same as source [fps]
    - Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
    - Bitrate: VBR, 1000.00 [kbps]
    - Encoding Time: 00:01:38
    Tue Dec 16 16:44:27 2008 : Encoding Failed
    The Operation was interrupted by user
    - Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/Gleaner_Shoot.prproj
    - Output File: /Users/johnstanowski/Desktop/THURDAY.mov
    - Preset Used: Custom
    - Video: 
    - Audio: 
    - Bitrate: 
    - Encoding Time: 00:11:07
    Tue Aug  4 13:19:39 2009 : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    I usually use After Effects so I'm not really up on Premiere that much, but I've used it a good bit in the past and never came across this problem.
    Any ideas?

    Thanks.  I hope I've provided enough information below.
    Premiere Pro CS4 (just recently upgraded from CS3 where this session was orignally created)
    Dell Precision t5400
    Intel Xeon E5400 2.33 Ghz
    3.25G RAM
    XP Pro
    Virtual Memory is tweaked per the optimization article on Adobe site:
    sytem RAM + 12MB
    2 x system RAM
    Hardware Acceleration - disabled in display properties
    project is 6 min 30 sec
    no fancy edits....standard audio/video transitions only:
    cross dissolve
    additive dissoolve
    band wipe
    darn door wipe
    audio x fade
    audio fade out
    audio fade in
    VT1:
    AVI video clips
    BMP stills
    1 JPG still
    VT2:
    credits roll at the end over still shot bmp
    AT1:
    voice over in WAV
    using sidekick 4.1 to trigger the compression on AT2
    EQ
    de-clicker
    AT2:
    music backing track in MP3
    using sidekick 4.1 triggered compression (ducking) from AT1
    Using the default PPR4 workspace layout
    Very basic edits in a 6 min training video
    Using Export>Media>AVI output (compressed) and stereo.  My sytem hangs in Media Encoder.  I let it sit for 20 minutes before I manually stopped.
    Thanks,
    Kyle

  • Premiere Pro CC does not embed 708 captions in QT

    Despite the fact that all of the online videos make it seem like exporting embedded closed captions is a breeze, it is not. After much experimentation I have found out there is no way to export 708 captions embedded into a QT file. I have been working with closed captions for a long time, and I am very familiar with the different pitfalls of closed captions. Why Adobe would chose to embed 608 captions only in an HD file is beyond me. To be excepted by broadcasters the captions must be 708 VANC Captions with the 608 alternative. Every time I get a file out of MACCaption this is what is included. I have tried to import those files into premiere pro CC and it does not see the captions.
    I have tried creating the Sidecar file as a .mcc file, and it seems to be correct. Unfortunately there is no way to embed this into a QT file.
    Kevin

    You are correct that 708 captions cannot be embedded in QuickTime files; they can be embedded in MXF OP1a outputs or written to sidecars. This is covered, albeit indirectly, at the bottom of this help page.
    Support for closed captions is a work-in-progress. CC7.0 provided support for CEA-608 and Teletext; support for CEA-708 was added in either 7.0.1 or 7.1. Of course, "support" is a loose concept, and work remains to be done on particular aspects of what exactly can be imported, how captions can be exported, and workflows for editing captions in a project. You can help us set priorities by submitting feature requests on what you think are the greatest needs.

  • Adobe Premiere Pro CC does not open project - just hangs, no error message

    I've just finished editing a project in PP CC, saved it, then tried to reopen it and the program shows a blank page, then hangs.  I get no error message.
    The project is based off a PP 5.5 timeline.  It updates fine (and in fact I can open and convert the original timeline with no problem).  However, once I close the new version and try to reopen, this symptom occurs.
    I have updated my Creative Cloud software and it shows the Premiere Pro is up to date.
    My computer is an ASUS laptop running Windows 8.1 Pro
    i5 processor
    8GB RAM
    NVidea Geforce 610M+2GB graphics card
    Need help as I have to have this project output and uploaded by 8am tomorrow.

    This is a follow up to my original post and follow up.  I've now seen this issue several more times and realize it was not an issue with my USB drive.  It is an issue with the Dynamic Linking in Premiere.  I consider this a MAJOR BUG, so please note what I've found if you have an issue with archiving or opening projects done with previous versions of PP.
    The issue I've found is that Premiere seems to lock up trying to find dead media links.  If you've archived a project or moved files from their original position, Premiere CC cannot seem to find them.  The result is not a system hang up, but just a blank screen.  In some cases, after leaving it for a couple hours it found the media and continued.
    I've had a similar issue when trying to link 'dead' media with the actual files.  The system goes off into neverland.
    The work around I've found is to import the older jobs into a new Premiere CC project.  At that point, replace any dead links (do NOT try and find the media as you'll be lost in hangupville) by importing the media again and replacing the clip in the sequence with the new import from the bin.  Once all your media is 'live', remove any unused media from the project and confirm there are no 'dead' links (you can look at the media icon and notice a ? if they are not dynamically linked properly).  Manually clear any remaining unlinked media.  Save the project.
    I have started to use Project Manager to archive all Premiere projects when moving them from one server to another.
    This is a total pain in the @ss, and nothing I've seen before Creative Cloud.  I hope that Adobe gets this resolved or I may consider dropping my subscriptions completely.  That is a huge investment, but this type of issue is too much trouble to manage for a small production company.
    I welcome any other thoughts, fixes, or comments.

  • Adobe Premiere Pro hungs, does not listen to commands / Mac

    I subscribe Adobe premiere pro for almost half a year and till now it was working perfectly. But for one week it has completely stopped reacting on any commands. I click "play" but it does not play, it hungs all the time. I tried to restart both Mac and programme but still Premiere is not working. Please anyone had this problem before and know how to fix it?
    Thank you!

    My normal use of Premiere Pro CC involves importing footage shot using either my Canon EOS5D Ml iii or my Panasonic FZ200. I import the footage using Media Browser.  When I create a new project it always used to display the Media Browser screen on a second monitor.  It also showed in the project settings that the renderer was Mercury Playback Engine GPU Acceleration (CUDA).
    Since updating to CC2014 it is not uncommon for the second monitor to be inactive and the renderer to appear as Mercury Playback Engine Software only.
    When I queried this with Adobe support they first of all took control of my PC and updated the graphics driver.  This did not seem to fix the issue which they put down to my graphics card not being on the Adobe list of supported AMD and NVIDIA products.
    I also spoke to the NVIDA support people and they confirmed this diagnosis.
    Since then the circumstances vary.  Sometimes the second monitor appears and the Mercury Engine Accelerator (CUDA) is active and sometimes not.  I also never had the problem until I upgraded to CC2014.
    I can live with this problem but would prefer if it wasn't there and I was running a supported graphics card.
    My real question is which of the huge list of supported products would be best.  The price range is vast and I do not want to overkill the problem by installing a card with features I will never need.
    I do not play any computer games and am only really concerned with Premiere Pro CC, After Effects CC and Photoshop CC.
    My use of effects in Premiere is limited although I do play around with Colour Correction and Sharping.  I am also exploring the use of Lumetri.
    My hope is advise from someone who has experience or knowledge of upgrading to a supported card.
    Thank in advance and for the guidance from previous responders.

  • Student Premiere pro cs4...please help

    I brought cs4 education suite, and recieved a serial code but the problem is my computer is really old and I can't buy a new one yet and it can't hold all the programs on the disc. I was just wondering if I installed one or two programs and input the serial number to use it, can I uninstall it and install it agin (if needed in future) using the same programs using the serial number or is that it? please help...

    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size
    - you need AT LEAST 2 drives for video editing, 3 is better
    - some HD formats work better with (require) RAID
    Also... you need about 50-to-60 Gig free on your boot drive for temp files
    Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0

  • Premiere Pro CS4 over remote desktop does not play sequence

    Hi all,
    I have been researching this issue over the internet but I have found absolutely no references to it:
    I am running Premiere Pro CS4 on my high-resource PC but would like to work from a different room so I am remoting form my laptop to my "good" PC.
    The system lets me do everything I could normally do when working directly on the main PC with the exception of playing back my edited files (before rendering). This is an obvious handicap since I can not watch my edited sequence and am, therefore, working in the blind. I am able to step through it frame by frame, but when I click the play button, it changes to a pause symbol (as usual) but nothing is shown in the video window. This does not just happen when previewing my edited sequence but also when previewing any imported resource.
    Essentially, Premiere Pro CS4 is not playing any video content over a Remote Desktop.
    Other normal playback software (such as VLC, Windows Media Player etc...) works though, so it is not an issue of no video playback at all. This just happens when I'm using Premiere Pro.
    Any suggestions as to what this may be? Any help will be greatly appreciated!

    I was able to edit a full 1080p HD video in Premiere Pro CS5 remotely using HPs RGS (Remote Graphics Software).  I had a Workstation at work with Premiere Pro installed on it and all the source footage on it.  I was then able to log on remotely from home with my old weak-sauce desktop and successfully edit and play back the HD footage remotely.  You just do a google search for HP RGS or go to this link. http://h20331.www2.hp.com/hpsub/cache/286504-0-0-225-121.html
    There is a free trial available too. I don't know why there is not more information about RGS on the web, but it seems to me to be the only solution to work on Premiere or After Effects remotely.
    I hope this helps

  • How to export in avi in premiere pro cs4 on MAC?

    Hi,
    How to export in avi format  in premiere pro cs4 on MAC?
    MAC 10.6.2
    downloaded div x for mac and did not get any option in export settings.
    Regards,
    Vinay

    I have checked the supported file format in premiere pro cs4 for windows and Mac.
    pre pro cs4 does not have that option.
    is there any alternate to this ?
    Regards,
    Vinay

  • Notebook qualified for Premiere Pro CS4

    Hi, I was wondering if this laptop would be equipped to use  Premiere Pro CS4 on,  not so much heavy use. I'll probably get the i7 2620m processor instead assuming it's worth it.
    It's a Dell XPS 15
    Processor
    2nd generation Intel® Core™ i5-2410M processor 2.30 GHz with Turbo Boost 2.0 up to 2.90 GHz
    Operating System
    http://www.dell.com/mc.ashx?id=Tech-Spec-Formatting:MDA-ToolTip&c=us&l=en&s=dhs&modalwidth =400&modalHeight=150&ovropac=0&modalscroll=yes&modaltarget=div&modaltype=tooltip&position= bottom&title=Genuine&flip=true&eventType=rolloverWindows 7 Home Premium 64-Bit
    Display
    15.6 in HD WLED TL (1366x768)
    memory
    4Gb dual Channel  DDR3 SDRAM at 1333MHz
    hard drive
    500gbSATA hard drive (7200RPM)
    video card
    NVIDIA GeForce GT 525M 1GB graphics with Optimus
    For $100 more the laptop has 6gb ram and NVIDIA GeForce GT 540M 2GB graphics with Optimus... would the difference in running PP CS4 be only marginal, or would it result in extremely worthy improvements?
    I use a desktop for editing but want to be able to use a laptop while I'm mobile, so I just want to assure I purchase a notebook that won't crash often or run too slow to bear while using PP.
    also wondering if a notebook with a drive that's only 5400 rpm would be acceptable if I'm also using an eSata?
    Thank you for your insight in advanced.

    I second Harm's and John's recomendations. That XPS 15, as configured as listed above, does not meet Adobe's practical minimum requirements for either CS4 or CS5. In fact, CS4 actually demands far more RAM than it it constrained to use (as a 32-bit program), meaning that it will never perform well regardless of the platform because CS4 relies extremely heavily on the pagefile due to the lack of total RAM support.
    And even if you plan to upgrade to CS5.5, that laptop suffers from several limitations:
    1) The i5-2410M, like all other mobile i5 CPUs, is only dual-core. And given that no desktop dual-core system performs as well as even a mediocre quad-core system, the dual-core laptops will likely be even slower than most of the desktop dual-core systems.
    2) The laptop has only 4GB of RAM. Unfortunately, the XPS 15 (in most configurations) does not support more than 8GB total of RAM. This means that you'd have to max out on the total RAM capacity just for Premiere Pro to even run acceptably well - and then, only if you choose a quad-core i7 (as in i7-2xxxQM).
    3) Because mobile hard drives are typically slower-performing than their desktop counterparts, consider an SSD instead as the laptop's system drive. But then, you'd have to put up with only one eSATA port and two USB 3.0 ports to connect an external hard drive.
    4) The GeForce GT 525M is barely adequate for CS5.x (if you choose to upgrade Premiere Pro to the latest version): It uses only DDR3 memory (current fast GPUs use (G)DDR5 memory), and it has only 96 CUDA cores. As such, it would be nearly two times slower than a fast mobile GPU.
    5) Dell often includes a fair amount of bloatware pre-installed on their systems - and the bloatware seriously degrades system performance. What's more, some of that bloatware cannot be easily uninstalled - and some parts of the bloatware are left on the system to screw up overall system performance even if the main bloatware apps are uninstalled.
    Put them all together, and you might very well end up with a system whose overall performance ranking is at or very near the very bottom of the PPBM5 results list on the PPBM5 site. In fact, even if you use CS4 and run PPBM4, your ranking would still be very near the bottom of the PPBM4 results list on the PPBM4 site.

  • Premiere Pro CS4 "Export Settings" window does not show up.

    Hello,
    I've run into a new problem with Premiere Pro CS4. Basically, when I select "File > Export > Media" my Export Settings window doesn't show up. If I click on the Premiere window I hear the beeping sound and nothing happens, if I hit Enter the Export Data window pops up and then Media Encoder opens. So, it seems that my Export Settings window is still open but I can't see it and make the necessary setting changes. It does not appear to be minimized and I can not locate it on my desktop anywhere. This is really frustrating because I was able to see the Export Settings window just a few weeks ago when I was exporting my last project. I've tried changing my screen resolutions but that didnt reveal the Export Settings window.
    Does anyone know what is going on here and, more importantly, how I can fix it? I am really stuck here and am working against a deadline. Any and all help is greatly appreciated!
    -Ben

    Ben,
    THANK YOU!!!! For two days I have been struggling with the exact same issue. And of course it was simple to fix, if I had just thought about it. Thank you for taking the time to post your experience. I had tried all sorts of stuff trying to get everything onto my #1 monitor, with desktop & workspace resets, resizing my display, etc. After reading and printing your post,
    Hitting ALT+Space,
    Down Arrow,
    Enter,
    and then pressing the left arrow and watching my Export window slide into view, I was laughing so hard, that I was tearing up. It would have been a month waiting for my second monitor to get repaired to get to see what was still being displayed on this ghost monitor. Each week, I video and edit our church's service and then post three versions (Windows Media Player, Ipod-MP4, MP3 Audio) of it to our web site. I would have been four weeks behind were it not for your post.
    Again, a BIG Thank You!!!
    Tony Salso
    [email protected]
    Cedar City, UT 84720
    Tony—Professional Digital Pictures
    --Videographer and Webmaster
    Red Hills Southern Baptist Church
    Serving Jesus in Southern Utah
    [email protected]
    www.redhillssbc.org

Maybe you are looking for