Premiere Pro CS5 Ignores error code and error_message

My plugin reports an error when returning from PF_Command_Global_Setup, but Premiere Pro CS5 doesn't display the error message to the user.
It correctly doesn't load the plug-in, but user's have no clue what happened.
if (!ok){
out_data->out_flags |= PF_OutFlag_DISPLAY_ERROR_MESSAGE;
strcpy(out_data->return_msg,
"MyPlug-in error\n");err = -1;
return
err;

I learned something the hard way...
Don't every return a -1 when your plug-in is running in Premiere. It makes Adobe Media Loader think your plug-in is bad and it will never try to load it again.
It was a ***** trying to track this down.
Oh, and Premiere won't display out_data->return_msg if you have one.

Similar Messages

Premiere Pro update failed - error code U43M1D206

Hi,
Premiere Pro update failed - error code U43M1D206
Windows 7 64 bits
All other apps were updated.
I tried all theses steps :
Solution 1: Restart your computer and try again.
Solution 2: Download the update from Adobe.com.
Solution 3: Uninstall and reinstall the Adobe Creative software you are facing difficulties applying the update too.
Avast Antivirus :
Infection MSIL:GenMalicious-ML [Trj]
Please look at the picture below :
Thank you for your help ;-)
Gilles

Hi Gilles V,
Please try: Error downloading Creative Cloud applications
Thanks,
Atul Saini

Moving Premiere Pro CS5.5 to laptop and back to desktop

Hi,
I have Adobe Premiere Pro CS5.5 on my desktop computer and I will be travelling for a month in the new year and will need to edit on the go.
Is there a way to deactivate my license/program on my desktop computer and activate it on my laptop temporarily, and then be able to take it off my laptop and put back onto my desktop computer?
Or are you only allowed to move the program/license a limited number of times?
Hope someone can help!
Thank you,
- Dannie

The license allows 2 activations... so just install/activate on your laptop... as long as you have only installed/activated once already

Premiere Pro CS5 when recording echos and reverbs- help pls?

Just purchased Master Suite and when trying to record in Premiere Pro CS5 through headset set up or microphone, all good equipment, I get lots of echos and intense "reverb" I believe... tried changing settings and turning off speakers etc.. with no luck. Any suggestions would be appreciated. FYI, was using Camtasia and had no problems at all.

Can you tell us all about the acoustics of your studio?
Also, knowing the make/models of your mics, and how they are set up would be helpful.
Do you have the output to the speakers active? I would turn this off.
Do you get the same problems, in other software (per Jim's suggestion), without making any other changes?
Good luck,
Hunt

Premiere Pro CS5.5 to CS6 and save back to CS5.5

I was given project in Premiere Pro CS5.5 to work on in CS6, but have to save it back again in CS5.5.
Is this possible?
If so. how does one do it?

The license allows 2 activations... so just install/activate on your laptop... as long as you have only installed/activated once already

Mac OS 10.7 and Premiere Pro CS5 not reading AVI and DV files, not rendering to Media Encoder

Hi Folks,
I've been wrestling with these problems since I bought my Macbook Pro running Lion (currently v10.7.3). I've had video editing and DVD authoring workflows that have worked perfectly for both CS3 and CS4 with Premiere Pro and Encore. I used to be able to import DV and AVI files and render timelines to Adobe Media Encoder so I can make DVD projects in Encore but it seems there are a lot of broken bits and pieces either with 10.7 or with CS5 or both. I've tired creating new projects or re-editing CS4 Premiere Pro projects that I can still edit with CS4 on my old Macbook Pro with 10.6.8. In fact I've given up on CS5 and I've gone back to my old laptop to edit. My problems with CS5/5.5 are:
1     Can't import DV files - error message saying this is an unsupported format
2     Can't import AVI files - error message saying this is an unsupported format
3     When I export media and try to use Adobe Media Encoder (AME) the render queue doesn't respond to the files being sent from Premiere Pro (PPro). I have to render the files one at a time from within PPro. I have no idea where the queued files go but even if I have AME open it doesn't respond. In CS4 AME would open automatically and wait until I told it to render the files.
4     In Encore I've had trouble burning to DVD. I have to make an ISO file and then burn that using Toast. I'n not particularly fussed about this but while I'm unloading I may as well give you the full picture.
Basically I'm really hating this vcersion of CS5/Mac OS. Lion is like using Vista from what I can tell. On my PCs I went from XP to Windows 7 so I kinda avoided all that pain it it seems the computer gods are smiting good and proper now. I don't care whose fault it is I want Apple and Adobe to fix it or if some kind soul can share their experiences and hopefully how they fixed it I'd be eternally grateful until the next upgrade totally blindsides us all.
Thank you in anticipation --> Mal/Melboure/AU

Sorry for your troubles.
Pr 5.5.2 is still a bit persnickety for me on 10.6.8, but overall, it's still faster than FCP7 and MC6, and overall pretty dependable. Imports and plays AVI files just fine.
Lion still isn't ready for prime time, from what I've seen. Like all Mac OS releases, it probably won't be until 10.7.6 or so. And that may never happen, becuase 10.8 is purported to be just around the corner.
So, my advice is, if possible, go back to what works, 10.6.8.

Please help with this Premiere Pro CS5 encoding error

VBR 2 pass encoding getting stuck at 50% in Premire Pro CS5. I assume this is the starting point of pass #2. The Error message states that one of the temporary files created during first pass cannot be read. I confirmed that said file exists, it is in the correct location and has the correct file name. Interestingly, at times, the 2 pass encoding proceeds through completion without issues, but I haven't been able to identify the reason for this. PLEASE HELP!! Thank you.

Thank you so much for replying. I tried running as administrator and it did not correct the issue. Luckily I did figure out the problem after trying various ways. It so happens that Windows seven sets "read Only" attributes to files within folders that you create by right clicking on the drive name and using "New Folder". So, when the encoder tries to over-write on one of the temporary files it created during the first pass it can't do it and it issues the error "Cannot open file for writing...etc.". I fixed it by right clicking inside the folder contents and changing the attribute. Now it works. This is the error that I was getting:

Adobe Premiere Pro CS5.5 error

http://imgur.com/rEFoQin
I get this prompt on bootup, everytime I try to open this projects, or within 5 minutes of opening this project. It doesn't seem to happen with other projects, and I'm concerned that I might loose my data. Can anyone help me with this?

Could be something got weird in the proejct file. Looks like your just starting and won't lose much by starting over.

Premiere Pro CS5.5 Upgrade is Downloaded and Installed, but 5.0 Isn't Updating

Hi there. I may be missing something very simple here, but here goes: I already have Premiere Pro CS5 on my system, and I just purchased, downloaded and installed the 5.5 upgrade a little while ago, but CS5 isn't upgrading. It's still opening as Version 5.0.3.
It didn't ask me for my serial number at installation, which made me think it found what it was upgrading, and I've tried restarting, but to no avail.
Any help is much appreciated. Am I missing a step?
Thanks!
Stephen

Hi,
Premiere pro CS5 and Premiere Pro CS5.5 are installed as seperate programs.
So Premiere Pro cs5.5 might have installed as a seperate program.
Check the all program list for the same.
If you face issues, just contact adobe technical support.

Premiere Pro CS5 unstable on (two) Macs - Help!

We've had Premiere Pro CS5 for a while and have tried using it a lot over the months. The problem is it's not very stable on either of out Macs so we keep going back to FCP7 for major projects.
Given Apple's recent discontinuation of support for pro video apps issues (I can't wait for FCPX to mature) and the massive transcoding delays we're currently facing in order to use FCP7 I'd really like to get Premiere Pro CS5 (5.0.3) to a place where we can use it day-in-day-out and be able to rely on it. I can accept that software occasionally crashes - but that's not where we're at. It crashes 10 times a day!
System 1:
Mac Pro - 8 core 16GB Ram, 4xSATA HDDs (1 boot 3xRAID), ATI 5770, 30" main monitor, 23" second monitor
Software installed includes Production Premium (5.0.3), Final Cut Studio (FCP7, Motion 4 etc), Lightroom 3, Aperture 3]
Snow Leopard 10.6.7 (fully updated)
System 2:
iMac 27" i7 Quad, 12GB Ram, 1 SATA drive, external Firewire Drives, ATI 5770, 24" second monitor.
Software installed includes Production Premium (5.0.3), Final Cut Studio (FCP7, Motion 4 etc)
Snow Leopard 10.6.7 (fully updated)
Just some simple stuff....
If I ever touch the handle to move a window while playing - it crashes.
Multicam crashes.
Moving clips on the sequence - sometimes crashes
Right clip and remove filters - crashes most of the time
Using the Colorista II plugin - if PPro tries to auto save a project while using the plugin - it crashes
These are just a few examples. It crashes a LOT.
So, are there any known incompatibilities between software installations? The iMac was a clean install not that long back.
Are there any known compatibility issues with these sets of hardware? If so, what? How do I fix them?
PPro also crashed when I had the older ATI card in the Mac Pro.
HELP!

> Can you point me to the change log to see what I'd lose by going back to 5.0.0 ?
Here are the details of what changed in 5.0.3 and 5.0.2.
> Do you have a ballpark idea of release time (in weeks rather an that days or hours
I'm prohibited from saying exactly---in case something goes wrong and we need to change it---but it will be very, very soon.
> I see CS5.5 trial can now run with all the codecs. If I download this
will it run side by side with 5.0.3 on my system for 30 days while I
evaluate it?
Yes, the trial version is made to run just fine on a system that has the previous version on it.

Just installed Premiere Pro CS5, impossible to run, error code: 1

Hello. Just installed Premiere Pro CS5 for the first time, but can't run it. I get the following error code:
Uninstall and reinstall the product.
If the problem persists, contact Adobe Technical Support for assistance in specifying the error code that appears at the bottom of this screen.
Error: 1.
http://www.adobe.com/fr/support
(http://puu.sh/2jN4T/6164d5b656)
Using Windows 8.
Thanks for any input!

Here are the logs: http://pastebin.com/6ay4akNN
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {63594DD4-0241-422A-93A5-B6530040E1C7} Required Common Fonts Installation x64 2.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\MyriadPro-Regular.otf'(Seq 50)
ERROR: DF012: Unable to find file(Seq 50)
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp012031737" Error 5 Accès refusé.(Seq 50)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 50)
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 5968] Sat Mar 23 18:45:15 2013 INFO
Exit Code: 0 - No error.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DF012, DF023 ... WARNING: DF029, DF054 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

Hey,
I am using video clips from sony digital hi8 camera and trying to import video clips (.mov) 720*480 fps 29.97 .But unable to get into premiere pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
Manoj

I too am getting this error in Premiere CS5. I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere. I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it. However, upon closer inspection only 2 channels had a waveform. I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels."
Any ideas?

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

Premiere Pro CS5.5 startup error. (DirectoryRegistry.cpp-283)

When i start up Premiere Pro CS5.5 on my iMac with OSX Lion it immediately shows this error:
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/Mulder64/shared/
adobe/MediaCore/ASL/Foundation/Make/Mac/../../
Src/DirectoryRegistry.cpp-283]
I don't really know what it means but i think it is because premiere can't find a file to start up because it doesn't have the right privileges. (When i login my mac as root user i can start premiere without any problems also in my administrator account with terminal starting it with sudo works without problems).
Did someone had this problem before? And how do i fix the problem?
Thanks in advance, Levi.

I have run into the same problem. I am running a late 2008 MBP with 2 480GB OWC SSD's and 8GB of OWC RAM. I have 10.7.5 installed and am running in 64 bit mode. I get this pop-up when I try to open Premiere or Bridge:
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/Mulder64/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../../S rc/DirectoryRegistry.cpp-283]
I am the Admin on this computer. I don't know how to give myself more admin rights than I already have? Photoshop starts up without issue.
Any suggestions?
Thank you,
Scott

Adobe Premiere Pro CS5.5 crasing from ripple delete and copy

I've been using Adobe Premiere Pro CS5.5 for several months now and it's been working with next to no problems and I've been very happy with it until today.
As I've neared the end of a recent project, after doing nothing different than usual I went to use ripple delete and every time I try it I now get this error message:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\Action\ClipTrackRippleAction.cpp-56]
Then:
Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.
Then:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.
Then:
Adobe Premiere Pro CS5.5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
Then if I try to copy clips or move multiple clips this error message shows up:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\Action\SequenceAddTransitionAction.cpp-57]
Then:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\TrackItemTrack.cpp-639]
Then:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.
Then:
Adobe Premiere Pro CS5.5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
I am, however, still able to move single clips, adjust the length of individual clips and able to watch my project.
I've tried two different computers and restarted one and nothing has changed.
Is there an explanation as to why this is happening? Is there anything I can do to get around this or make it stop?

Lord Nelson here.
I've reverted back to 5.5.0 as I was experiencing lock-up problems with the BM Intensity Pro.
Unfortunately I haven't found a way of simply uninstalling the update and reverting back to an earlier version. Win 7 Sytem Restore wouldn't, so I had to uninstall Premiere Pro, apply the Adobe Clean Install utility (or whatever!) and then reinstall PP CS5.5. Trouble was that it reinstalled the whole suite, not just PP - so I lost all custom workspaces across the suite.
Grrrrr!

Premiere Pro CS5 Ignores error code and error_message

Similar Messages

Maybe you are looking for