Premiere Pro with Matrox02 mini--I don't need separate graphics card, just an HDMI monitor, right? with 1-to-1 pixel ratio?

Just confirming--using mac and Premiere--and Matrox--but ordered an NV card too--with all the hullaballoo regarding Premiere specs... They never mentioned Matrox (to my knowlege) as a 'graphics card'--I guess, because it is!?!

Mavericks is designed to use as much RAM as possible. Free RAM is wasted RAM... it's RAM that's not working for you, not doing anything helpful. Seeing your RAM full is not an indication that there is a problem. Seeing your memory pressure graph spike would be.
As for the performance issues, see my Mac Performance Guide.
Note that you've got a lot of third-party software loaded:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [not loaded] com.adobe.SwitchBoard.plist
          [not loaded] com.google.keystone.daemon.plist
          [not loaded] com.livescribe.PenCommService.plist
          [not loaded] com.luthresearch.scservice.plist
          [not loaded] com.microsoft.office.licensing.helper.plist
          [not loaded] com.paceap.eden.licensed.plist
          [not loaded] PACESupport.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.google.keystone.agent.plist
          [not loaded] com.luthresearch.savvyconnectmenu.plist
          [not loaded] com.wacom.pentablet.plist
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist
          [not loaded] com.facebook.videochat.[redacted].plist
          [not loaded] com.google.keystone.agent.plist
          [not loaded] com.Livestation.plist
          [not loaded] com.spotify.webhelper.plist
You should probably try to weed some of that out, if possible, or at least make sure it's all updated and compatible with Mavericks.

Similar Messages

  • Premiere Pro Won't recognize Nividia GTX 780 6 GB Graphics Card Mac Pro Tower Mavericks

    Just figured this out, update to the latest driver but you will also need the Quadro K5000 driver to make it play nice so that you can use GPU acceleration.
    NVIDIA DRIVERS Quadro & GeForce Mac OS X Driver Release 334.01.02
    I am now able to utilize the card to it's utmost capabilities.
    Make sure you also install the most up to date driver also for the card.
    Solved my problem anyway and didn't want anyone else to have to dig for this solution for hours and hours.
    Hope it works for you.

    I've spoken with adobe, I've donne everything they ask....
    It's a waste of time, I paid for this program, I paid to have adobe on my computer, and until yet no solution has been found.
    I don't think this is right... so much time and nothing, no solution, no nothing....
    sorry ADOBE but you are slowing down

  • Sending transcoded clip to Premiere Pro with Mono audio

    Hi there,
    I noted that others had asked this question around August 2013 but haven't seen any progress made on this issue, which is that we prefer to edit in Premiere pro with mono audio tracks, but we are unable to make transcoded material come over from Prelude with mono audio.
    We need to have total control over our audio tracks and for us in a News/ENG environment that also means fast turnaround production.  So we want to choose the part of the XDCAM clip that we want in Prelude, send it to Premiere Pro and put the interview grab (for example) down on track 1 of the Timeline with only talent mike audio (which was recorded on the camera's channel 1) and not have to pan it or worry about doing much else to it.  Then we cut the rest of the overlay with sound effects that were recorded on channel 2 going straight to track 2 on the timeline.  When we transmit it to head office we send them two discrete channels of audio: talent/VO on Track 1 and effects on Track 2.
    We only have a problem when Transcoding is involved.  With the audio prefs in PrPro set to "Mono" everything else is fine, its just that when Prelude transcodes a video it makes the audio a hassle for us, because it can only come over to PrPro as a stereo audio track.
    Adobe, is there ever going to be the ability to just make a Preference in Prelude to send the clips with Mono audio, as there is in Premiere Pro??
    Or has anyone figured this out and I am just missing something?

    In Adobe Media Encoder, set up a new preset that has the video and audio settings you want to have your source footage transcoded to:
    Then name and save that preset. The next time you launch Prelude, the preset will be an option for you to select to use for transcoding your material.
    MtD

  • How can i buy Adobe Premiere Pro With the student discount but in one payment?

    i want to buy adobe premiere pro with a student discount but i dont want to have to make multiple payments, how can i do this?

    CS6 Education https://forums.adobe.com/thread/1585740 is pay once, own forever... IF you can use 3 year old software
    Otherwise, the current version is by subscription only... which means that when you stop paying, the software stops working
    Adobe Education... Start here https://creative.adobe.com/join/edu
    Education Plan https://creative.adobe.com/plans?plan=edu
    One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
    http://www.adobe.com/products/creativecloud/students.edu.html
    http://www.adobe.com/education/students/student-eligibility-guide.edu.html
    ID Proof http://www.adobe.com/store/au_edu/academic_id.html

  • Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update softdate" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!

    Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update software" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!

    You need to upgrade OS X.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Remove apps that I don't need but keep them just in case....

    My iMac 27" is cluttered with apps that I bought and no longer use
    How could I remove them from my iMac to free HD space, but still keep them some where, just in case I need to reinstall them in the future.
    I would like to make the Mac a bit more leaner and fast
    Remove apps that I don't need but keep them just in case....
    My specs are...
    Thanks for your help
    Daniel

    Daniel The Truckie wrote:
    ... Do I just drag and drop them to an external ...
    Yes.
    Be Sure the External drive is Formatted Mac OS Extended (journaled)
    After you are satisfied they are Safely on the External... You could even Select a Couple on the External and check that they Open and Run...
    Then... Discounect the External and Delete the particular Applications from your Internal.
    Then... if you like... Reconnect the External and Select a Couple of the Applications and check that they Open and Run...

  • Need new graphic card for my Satellite Pro P100

    Hi
    My Toshiba Satellite Pro P100 has no display from screen or external monitor it has a seperate Nvidia Geforce go 7600 graphics Card.
    Can any body tell me were I can get a replacement card?
    Thanks

    How you know your notebook has separate graphic card?
    Have you had success to remove it from the mainborad?
    Sorry about these questions but Im a little bit confused. As far as I know graphic card is part of mainborad and cannot be replaced separately.
    http://195.182.196.33/kb0/FAQ7A01ZW0007R01.htm

  • Nightmare recording audio into premiere pro with Mbox 2 Mini  Mac OSX

    I've adjusted buffer settings, power settings, and so on, not to mention watched two Premiere Pro tutorials on recording audio directly into Premiere that barely still apply, but adobe finds relevant enough to suggest.  I am using a Digidesign Mbox 2 Mini and an ElectroVoice RE20 Microphone.  If I'm lucky I get a clean track of audio for about 45 seconds before the audio begins to pop and crack.  In reading on Avid's forums this is due to a buffer issue, but I've since changed my buffer to every setting and still keep wasting time.  Does anyone have any experience recording directly into premiere pro cc 2014?, Anyone with an Mbox 2 Mini?, Do you have an audio box that seems to work perfectly with CC 2014?  If you have any insight on any of those questions, please comment below.
    I've tried everything I could find and read about online, but at this point I have to give up before I waste anymore time.  I've switched usb ports, maybe is a USB 3.0 with 2.0 device?, I switched power locations, plugs, protectors, and so on, even USB cables.... blahhh
    Specs:
    Premiere Pro CC 2014 8.1
    2012 Macbook Pro (Non-Retina), 16GB of Ram, dual internal SSD, 2.7 GHz Intel Core i7
    OSX 10.8.5
    Mbox 2 Mini, Firmware 1.4, latest drivers.

    Hi AbzZilla,
    I was looking up this post and found you've a similar problem...
    I was having the non-responsiveness with the above configurations in 'LE 7.4 & 7.4.2c (Mac-only), but I have now installed Pro Tools LE 8.
    Unfortunately I still can't get the MBOX2 to work with the Mac mini 2, but the MBOX2 USB status alights now [i.e. it's very bright and now works] on the MBP 17" ...all with Mac OS X 10.5.6! In all previous Pro Tools versions it confirms support for Pro Tools and the MBox, with the Mac mini:
    http://archive.digidesign.com/compato/osx/os.cfm
    So I too am 'stumped' as this is the brand new computer that I wanted the software to be operable on. I've swapped the USB cables (to check if it was a failed cable) and it looks like either a firmware clash or a USB-port power issue? I've also tried non-powered USB hubs... as it could be the later issue? So when I find my powered USB hub I'll let you know, ...if there's a change?
    Until then... I Iook forward to further posts in this thread!
    Thanks for kicking-off the discussion.
    'Regards, ;-R

  • Premiere Pro with Blackmagic Intensity Pro; Importer

    I'm using a Blackmagic Intensity Pro with Premiere Pro. I don't Import anything with it directly, i just use it to preview my timeline on a seperate monitor.
    The issue I have is when I try to import a AVI-file to my project
    before I had the Intensity Pro, Premiere would input the file as a Microsoft AVI and it worked perfectly.
    But now the exact same file is imported as a Blackmagic AVI-file. now I am experiencing green bars in my video and the color information is totally screwed up.
    So my question is: can I deactivate or change the Import-settings of Premiere, without to remove the Card completely (turn PC off, remove card, turn back on...)?

    Ok, my workflow is:
    I'm importing a video file from my hard drive via double-click or drag'n'drop. i don't capture from a video source with the intensity pro!
    the specs of the video file according to premiere are:
    Type: Blackmagic AVI File
    File Size: 1,7 GB
    Image Size: 1024 x 768
    Frame Rate: 18,00
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00;15;18;28
    Average Data Rate: 1,9 MB / second
    Pixel Aspect Ratio: 1,0
    ############### BMD Importer Supplemental ###############
    AVI File Details:
    Timecode:
    Reel name: ''
    User timecode:
    Alternative reel name: ''
    Contains 1 video track(s) and 1 audio track(s).
    Interleave: 1 : 1.00 (conforming required)
    Video Track 1:
    Size is 1.49G bytes (average frame = 94.18K bytes)
    There are 16541 keyframes.
    Frame rate is: 18.0000 fps
    Frame size is: 1024 x 768
    Video format is 'MJPG' 422 8-bit ITU-R 709
    Audio Track 2:
    Size is: 168.2637M bytes
    Rate is: 48000 samples/sec
    Sample size is: 16 bits
    I've tried importing the video file at a friend's pc with premiere pro 5.5 and there the file works just fine. so I'm assuming that it has to do with the intensity pro...
    It has the same properties execpt under Type there is "Microsoft AVI File" and everything beneath Pixel Aspect Ratio isn't there.
    Thanks

  • Long Rendering Time in Premiere Pro with Yosemite

    The rendering time with Yosemite and Premiere Pro CC 2014 is stating hours for a 17  minute video (regardless of small or large file) I recently upgraded to Yosemite (mid project like a dodo-newbie to the editing world).  I also recently installed a Neat video plug in.  Don't know if that has anything to do with it.  Should I revert back to Mavericks?  Or is there something I can do?

    I'M having the same problem, though it's inconsistent.  When I first encoutered the issue it was a simple fix of switching to the Cuda renderer from the open CL/Cuda that is automatically selected.  That little honeymoon lasted a week or so, but now I'll have 4 or 5 clips varying in length from 30 to 120 minutes and invariably one or more will get hung up and require many hours to export.
    Also in the norning after a night of exporting, the ME will indicate the clip was successfully exported, but when the files are checked one or more will not be properly exported.  Generally if I try again the clip will export properly and in a decent amount of time, but sometimes it takes seveeral attempts.
    Add to that that I get dropped frame choppy playback about 70% of the time it becomes a very frustrating program to use professionally.  My drive speeds are good at well over 120Mbs for read and write and this is only 1080/30P material.
    Tried tech support via phone, which was a joke, even though I have received excellent support in the past this episode was not so.  Tech didn't even give me a case number, and I forgot to request one as well, but after remote linking to my machine for an hour in which he was most of the time off the phone, he came back on said he would watch my machine, but was now hanging up.
    Clearly there are issues with this release.  The previous release worked fine.  I just now need to figure out how to go back to the previous version.
    Jim Watt

  • Exporting in Premiere Pro with a GTX 980 CUDA takes 4 hours

    Okay, this problem has been plaguing me ever since I upgraded to a new PC with some very high end hardware. I'm trying to export a 25 minute h.264 encoded mp4 file from an AVI video and PCM audio source, however, exporting it using YouTube 1080p preset takes over 4 hours. This used to never happen before, even on my old laptop which had a GTX 675M card and would take 1.5 hours at most.
    The source files I use through video capture is AVI with MPEG-1(VBR) 1920x1080 resolution with 29.97 frames/second. The audio source is PCM WAV 48.0KHz stereo.
    The preset I have for exporting in Premiere Pro/AME CC 2014 is:
    video: h.264 format, 1.0 square pixel, 29.97 frames/second, Progressive scan
    bitrate: VBR(1 pass), target/max: 8.0 Mbps
    audio: AAC 192kbps, 48kHz stereo
    The hardware I am using is a Gigabyte x99 ud-4 motherboard with G.Skill Ripjaws 16GB DDR4 2400Mhz RAM, i7-5820K CPU 3.30 GHz, Windows 7 64bit OS, with an Nvidia GTX 980 card with CUDA enabled in both Premiere and the Nvidia Control Panel. Yet, I am still getting over 4 hours rendering time during my exports for a 20-30min video source? I  am completely stumped on this and it's unbelievably frustrating to see my top of the line system take so long to render this file when my 2-3 year old laptop did the export in 1/3rd of that time? I do this as a hobbyist and any help on trying to get this fixed would be a major help to me. Thank you in advance!

    Hmmm...
    I did a quick test in your behalf with a test project with and without "alpha glow" applied to all of the media.
    The results were actually kind of strange:
    - export to .mp4 utilized all cores (6-core box w/ Hyperthreads) with a smooth 82% utilization for the whole export; memory usage (also from task manager) went up and once it hit a maximum, it stayed there
    - export to .mp4 with "alpha glow" applied -> CPU usage started out pretty good, then memory usage maxed out and then actually cam down; after a bit, the CPU usage stabilized at around 22%, or about 25% of what it had been at the start of the export
    Smells to me like an Adobe bug or design-flaw.
    Anyway, good luck with your testing.
    I totally agree with Bill's suggest to do a full PPBM7 test on your new rig and report the scores back here - and to the PPBM7 site of course. This will help you to have confidence in your new hardware and setup. Once your hardware and configuration (for Win7, drive caching, Premiere settings, etc.) are working fine, then your particular workflow, etc. can be a separate troubleshooting step.
    Good luck!
    Regards,
    Jim

  • Coordinating Premiere Pro with Audition

    I have a video I'm editing. I've completely thrown out the camera sound track and I'm creating the audio from scratch from various sound clips. In some cases I want to coordinate the editing of my video clips with the sound track, and in other places I want to coordinate the sound (e.g. foley) with the video. Can anyone suggest a work flow for this?

    A general video on working with PPro and Audition (from CS5.5)
    http://tv.adobe.com/watch/no-stupid-questions-with-colin-smith/premiere-pro-to-audition/
    Another (more recent) video from Niels:
    http://tv.adobe.com/watch/creative-week-how-tos/adobe-audition-cs6-for-audio-sweetening/
    Even though it is called "Speech Alignment," I've successfully used this in foley to match up my foley footsteps (and other sounds) with what was from the on-set sound.
    http://tv.adobe.com/watch/sound-your-best-adobe-audition/how-to-use-auto-speech-alignment- in-audition/

  • Premiere Pro with Diamond VC500

    Can Premiere Pro capture video from device converter "Diamond VC500"?2

    No... that is a USB device, all versions of Premiere (Elements and Pro) only work with a Firewire connection
    http://www.diamondmm.com/vc500-diamond-one-touch-video-capture-edit-stream.html
    If your computer has a Firewire port, look at http://www.grassvalley.com/products/converters
    Amazon.com: Grass Valley/Canopus 77010150100 ADVC110 Converter: Computers & Accessories

  • How can I sync up my clip in Premiere Pro with the After Effects Comp I replace it with? How do I link them?

    I am having some issues seeing a tracked mask work correctly in Premiere Pro. I clicked on my clip in my Premiere pro project and hit "replace with after effects comp". After correctly masking out everything in AE and tracking it to perfection, I clicked save and went back to my Premiere project. However when I view the new "linked" clip in my project it has dropped frames. The mask seems to track correctly but the dropped frames are an issue. Does anyone know how I could fix this?
    Thanks,
    Ajnies

    When I return to the linked clip in my Premiere project, it does not contain every single frame of the original after it has been replaced by the AE comp. It skips about every other frame. I am doing a stop motion animation so this is highly noticeable.

  • No sound in Premiere Pro with .mts files

    Hello,
    when i import .mts files in Adobe Premiere Pro. There is no sound, why? I can import other other video files, like .mp4 and there is sound.
    Please Help!
    Premiere Pro detects the most settings false, it said 25p but i recorded with 50i and 1080i

    There is Audio in my files, the files are produced by an Sony Legria HF S10. I can play the sound with vlc Media Player, but in Premiere Pro CS 5, they said in the file is no sound!
    Other files, like .mp4 had a little speaker on the clip, but .mts files not!
    I used the Adobe Premiere Pro CS 5 German Trial.

Maybe you are looking for