Preserve Manual Overrides

Hi All,
I have a script which find  all the paragraph styles in myFind Array and change all the paragraph styles as per in the name of myChange Array.
Request:
Changing Paragraphs Styles without clear overrides or preserve local overrides like manual bold, italic etc....
script:
var myFind = ["H1", "H2", "H5"]
var myChange = ["a_H1", "a_H2", "a_H5"]
for(var i=0; i<myFind.length; i++){
     app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
     app.findGrepPreferences.appliedParagraphStyle = myFind[i];
     app.changeGrepPreferences.appliedParagraphStyle =myChange[i];
     app.activeDocument.changeGrep();
     app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
Could anyone give solution for preserve clear overrides.
Thanks in advance
Beginner

Dear Trevor/Jump_Over,
I want to preserve locat format (i.e., maintain manual bold, italic etc...)
Trying Trevor script. But please find the screenshot
var myFind = ["H1", "H2"]
var myChange = ["a_H1", "a_H2"]
for(var i=0; i<myFind.length; i++){
     app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
     app.findGrepPreferences.appliedParagraphStyle = myFind[i];
      myFind[i].applyParagraphStyle(app.activeDocument.paragraphStyles.itemByName(myChange[i]), false)
//~      //app.changeGrepPreferences.appliedParagraphStyle =myChange[i];
//~      //app.activeDocument.changeGrep();
     app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;

Similar Messages

  • Need to manually override vbup-lfsta for fully invoiced order

    We have two sales orders in production that have been fully invoiced, but due to an old bug in our shipping point determination logic, the shipping point was accidentally cleared in the sales order, thereby showing it as incomplete (which is correct).    Because these documents have fully delivered and invoiced, we cannot update the shipping point but need a way to manually change VBUP-LFSTA from A to C (something similar to VL_complete, but for a sales order).      I am basically looking for the OPPOSITE of program SDVBUK00, which corrects incorrect VBUP and VBUK settings.     I need to manually override the settings since these are very old documents, cannot be reversed, rejected or changed and are not needed to show on the incomplete orders report because they were shipped and billed.
    Thank you in advance for your time!
    Regina
    Edited by: Regina DeMita on May 13, 2010 4:59 PM

    Hello Regina
    I have the following suggestions for you.
    1) The only way these docs may be bothering you is by showing up on the incomplete orders report. If you eliminate them in that report,  then you should be fine I guess. So my workaround is use Tcode V_ UC and create a variant excluding these 2 documents from the list (using the Sales Document field in the General doc data section and the option to exclude single values) and make this variant the default for all users.
    2) Use Z-code to change the status. See OSS notes 1177165 and 617501, the second one particularly because it has Document # in the selection criteria. They are meant to correct the Revenue Recognition status of sales documents and may be you can copy and adapt one of them to suit your situation. Or best ask SAP to provide one as they have done program from note 1177165 based on customer request.
    Hope this helps.

  • Manual override option for Unit selling price in Order line level.

    In OM R-12
    Our client wants manual override option for Unit selling price in Order line level.
    But there is no solution available to fulfill this requirment. To be able to manually override the price on a Sales Order line you
    must have defined a manual modifier that qualifies for the Sales Order line in question. Without a suitable manual modifier the price cannot be changed.
    This is current standard functionality.
    Anybody can give some suggestion/workaround to override selling price in Order header level without using the modifiers.
    regards,

    Hi Kashif,
    I'm finding it little difficult to buy Oracle Support's feedback with regards to R12 functionality for direct List Price update without using any modifier (manual or whatever). After all it is Oracle's product and they should know better. But test results in Solution Beacon's Vision 12.0.6 instance (http://www.solutionbeacon.com/tools_r12vision.htm) and documentation updates in R12 (R12.0.4) OM user guide & implementation manuals potray a different picture.
    After your last post, I did a test in Solution Beacon's Vision 12.0.6 instance with following details:
    OM: List Price Override Privilege = "Unlimited Access" at user level
    OM: Discounting Privileges = "None" at user level
    No manual modifiers defined and Order status = "Entered"
    I could display the "List Price" field from folder under Line Items >> Main tab, override the list price to a new value and save. The unit selling price showed the new value based on updated List Price as soon as I tabbed out of the list price field after overriding. After saving it showed the new selling price. _Please note that under Line Items >> Pricing tab there is another "List Price" field and that is not editable_. For such overrides "View Adjustments" (from Line >> Actions) will not show any adjustment details as it is a direct update of list price.
    Also please note that, if "Enforce List Price" checkbox is selected for the order type, the list price cannot be overridden even if the profile option is set to "Unlimited Access".
    Document References:
    Oracle® Order Management User's Guide
    Release 12, Part No. B28099-03, September 2007 >> R12.0.4
    Page No. 10-74
    +Note: Note: If any order line for an order has the Calculate Price Flag value equal to Partial Price or Freeze Price new order level adjustments will not be applied or allowed to be overridden. _The profile option OM: List Price Override  Privilege controls your ability to override the unit list price. If you have this profile set to Unlimited, you may modify the unit list price by editing the current value displayed_. The original list price is saved in a hidden folder field, so you can display it if necessary+.
    Page No. 10-94
    User Procedures
    _A new profile option, OM: List Price Override Privilege controls whether or not you can update the List Price_. It is enabled and updated at the application, responsibility and user level. It is not user visible and updatable. The values include+:
    - View Only: This is the default value. If set to this value, the current behavior is retained, which means unit list price field is protected.
    - Unlimited Privilege: If set to this value, you can override the unit list price field from the main tab and immediately see selling price adjusted accordingly.
    To use Override List Price:
    +1. Navigate to the Sales Orders/Quick Sales Orders window.+
    +2. Enter the header and line information, including the ordered item and quantity, then tab to the next field. The Selling Price and List Price display+.
    +3. If the profile is set to Unlimited Privilege, you can enter a new list price in the List Price field. You can either proceed to the next line or save your work+.
    +4. You can see the new, entered list price, and if there are automatic discounts applied, they will be based on the new list price+.
    +5. If the folder has been modified to show the Original List Price, the original list price displays+.
    +6. To change the List Price again, go to the list price field and enter a new value, replacing a previously entered value. If Audit Trail is enabled for List Price and a reason is required, a window appears to enter a reason and optional comments+.
    Note: Subsequent overrides of the List Price, after the order line is saved, can be captured by Audit Trail, depending on the setup of Audit Trail (entered or booked state) and any processing constraints that have been set up.
    In the OM Implementation Manual also there are notes related to this.
    OM Implementation Manual
    Release 12, Part No. B25975-03, September 2007 >> R12.0.4
    You can refer to page no. 2-59, C-4 etc.
    Thanks
    Supro

  • How to preserve manually maintained Hierachy?

    Gurus,
    How to preserve manually maintained Hierachy in parenth1. We are maintaining some much data manually for BPC only with hierarchy. Problem is every time when we load the hierarchy from BW system the manually maintained hierarchy gets wiped out.
    We don't want to maintain BPC only hierarchy as seperate parenth2. I read this article Understanding how to Preserve Manually maintained Alternate Hierarchies with the new BPC Data Manager Package to Load from BW Hierarchies but this is maintaining as seperate parenth2 or 3.
    Please suggest.
    Thanks.

    Hi,
    You can not maintain the hierarchy in BPC and load from BW, it will be wiped out every time.
    What we did was that we created a new custom hierarchy in BW with the extra nodes.
    Andy

  • Enterprise Mode site list and manual override

    I have a small question / issue when using Enterprise Mode.
    We have enabled it using GPO by specifying both a site list and the Enable settings for manual override. This works fine but I don't know how to reset the manual override if somebody flicks the EM mode for a specific site.
    I just want to tell IE to forget all manual overrides and apply the sitelist as delivered.
    I tried to look in the registry, in the %AppData% fodler, even cleared the IE cache but IE still remembers the user overrides.
    Any help will be really appreciated.
    Thanks, Nic.

    Hi Nic,
    As the official documents said, this registry key [HKEY_LOCAL_MACHINE\SOFTWARE\ Policies\Microsoft\Internet Explorer\Main\EnterpriseMode] “Enable” = “” | {URL:port} can also be used to collect manual overrides. By configuring the “Enable” key with a
    valid URL and port, Internet Explorer will initiate a simple POST to the supplied address whenever a user enables or disables Enterprise Mode. This effectively helps customers crowd-source lists of compatible Web apps from their own users, which may decrease
    triage and testing costs.
    Approximately 65 seconds after Internet Explorer 11 starts, it looks for a properly formatted site list. If a new site list is found, with a different version number than the active list, Internet Explorer 11 loads and uses the newer version.
    This is designed by default, and we cannot reset the by preventing the changes.
    We may try to logon script to re-deploy the original site list to reset the site list settings.
    Kate Li
    TechNet Community Support

  • Admission audit - manual override of audit results

    Hello -
    Not sure if this is a config issue on our side or an SAP issue. When the users use the GUI to manually override a particular requirement from the original audit results  ex:  from 'not met' to 'irrelevant' and save, it works.  However, as soon as an audit is executed again (which we want it to do a lot in case that last piece completes it) the manual overrides are wiped out and the original results are returned. 
    Did any one else have this issue?  If yes, how did you fix it?  Is there a way to keep our manual overrides?  We followed the audit cookbook for our config. 
    thanks,
    Denise

    Hi Denise,
    As Prabhat said this is the design of the framework, it checkes rules during the assessment run and is used as a bases to decide if there is a pass or fail on the rules. There is no hidden IMG entry to enable the overriding elements in the admission audit. This only works if you are intending to approve the admission directly after you override a rule (first save before you approve!).
    We also encounter this requirement at Dutch universities and the need for manual override of rules too. There we used an automatic admission audit assessment run during the night which manual overriden the rules (got back to 'red' again, hence fail).
    We 'solved' this by conducting a thorough investigation on the rules (content) and a re-design of rules to make them more rigid
    OR more flexible. Plus for rules which really needed override capabilities we created a seperate tab in the Student File which provided the flexibility to overrride particular rules per open admission.
    Due to this minor development effort we could keep the standard strenghts of the audt framework and we provide flexibility or overriding rules
    br
    Rob

  • Manual override

    Could there be provision for manual override ?
    I can override body/lens.
    I'd like to be able to check correction
    for variable aperture/focal length.
    ( I have a bunch of scans and it would be great
    to adjust the parameters to the best fit)

    I am not sure I understand your request. In PS CS5, from the LC filter dialog, you can select a profile, right-click (windows) or Ctrl+click, you can access the cloest subprofiles present in the currectly selected lens profiles. There you can manually override the default subprofile selection. The functionality is not available in ACR. I am not sure if this is what you are asking for.

  • Manually override auto off

    in my old BB i was able to override auto off by using the on button on top.  but with my Curve, when i set auto offf for 11 pm i am unable to manually turn the phone on until the auto on time is reached.  anyone know how to fix this?

    Hello
    Welcome to the Community
    May we know your device OS version and if you recently upgraded your device OS?
    Thanks,
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • How to preserve manual icon arrangements in a folder?

    Ever since I upgraded to Mountain Lion I notice that if I log out without selecting "reopen windows when logging back in," when I do log back in the contents of my downloads folder are rearranged and sorted.   View settings for this window have Arrange by and Sort by both set to None.  I use the downloads folders as a workspace of sorts and would like to keep my manual arrangement.  Any suggestions on how to do that will be appreciated.

    How are they re-arranged and sorted?

  • Manual override i-photo

    I am very, very troubled by the new i-photo.  It no longer allows manual placement / ordering if images in the master library and as a result, scatters things TERRIBLY if they have been modified.  My 6000 images are in total disarray and 'events' does not solve the issue.  Please, please, is there ANY way to return to an earlier version of i-photo?  I really hate this one (for other reasons as well).  Is this ever possible?  Thanks!

    The point is to use Albums for manual sorting. The library is for automatic management.
    Do you have a copy of the Library from your earlier version?

  • Manual Override of Slide Transition

    Hello. I'm new to Keynote and can't seem to find out a good answer. I've set up a set of slides to run automatically - each slide is shown for 20 seconds. Is there a way, during the Keynote presentation, to override this? For instance, if I want to move forward or backward, none of the keys work - the slides keep advancing at the 20 second intervals. (This is possible to do in PowerPoint.)
    Thanks in advance for your help!

    I purchased the Keynote Remote for the iPhone and that doesn't work. And the iTunes Remote only works for iTunes.
    Any other thoughts would be appreciated!

  • Manual override for cooling fan

    We are recording live using Macbook Pro (OSX 10.4.11), Garageband 08 and Presonus Firewire Interface. During recording when the cooling fan kicks on, we have a problem. We're not sure what really happens, but we hear a lot of digital noice and end up having to restart the firewire interface/computer to get it all working again.
    Is there a way to adjust the fan settings so that the fan runs constantly? And then reset the defaults after we're done recording? Thanks any help is appreciated. Laura.

    SK.
    639460-001
    Your manual here.
    http://support.hp.com/us-en/product/HP-Pavilion-g7-Notebook-PC-series/5186814/model/5218699/manuals
    Some for sale on Ebay.
    http://www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=639460-001&LH_PrefLoc=1&_sop=15
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Manually override location services?

    My bank won't let me deposit checks Without  location services turned on. The problem Is that my iPad 3 Is Wi-Fi Only.  It can't  locate itself when I'm at home. No fixed Wi-Fi signals available..
    Can I plug a router into the wall (with no ISP) And register it with Apple?

    I'm using a USAA app, I had location services turned on, Although I got an erorr saying I must have them turned on In order to use the service, Or location services cannot locate my position I can't remember now being it's a couple days ago when I tried it.  What I do know for sure is that they were turned on I really should've written it down (the error) though I guess.
    I assumed my Verizon 4G device would be of no use for my  location services.  How would this work?
    This USAA app is not the only program I have problems with.  Star walk distant Suns, And maps I also have problems with.  When I drove from Asheville North Carolina to truth or consequences New Mexico There were a few instances location services worked But I had to be parked for a while and had to be near Wi-Fi signals.
    Had I known the difference between iPad 3 with just Wi-Fi and iPad 3 with 4G I probably would've sprung for the extra hundred and 30 bucks. I assumed iPad 3 with Wi-Fi had a built-in GPS Which now I know isn't the case.
    One of  the things that impressed me was driving In a car with a friend of mine Who did have iPad with 4G And  the thing tracked us  flawlessly.

  • Enable Manual Status Override

    Hello Skype!  Thanks for building a great product over the years.  I understand that recently the presence feature for iOS has been adjusted to automatically set away after 5 minutes.  Would it be possible to implement a feature to allow someone to override the status to always be set as available?  The point of being available on an iphone is that if someone contacts me, the message is pushed to me, so, in fact, I am always available.  Being able to manually override and always be available better represents my status.  Being set as away is very similar to being invisible or offline to others because others think I am away and unavailable to respond to messages, thereby promoting non-skype communication channels such as emails or calls.  Now, I am forced to leave my Skype open without letting my phone sleep so that others will know that I am available which is an even bigger drain on my battery.  I much preferred the old Skype.  Thanks for your consideration.  If you can let me know whether this feature is being considered, it will help me determine whether to stick with skype or migrate to another app to serve my needs.

    Hello Prometheus1.  I appreciate your response, and I agree with your post with regards to voice/video.  My concern is around receiving messages.  Since I can still receive messages, I am, in fact, available for messaging.  The problem that I am facing is that being set as away discourages folks from messaging me using Skype because they think that I am not monitoring my phone for their message, when, in fact, my skype is running in the background, and as far as I know, the skype messages are being pushed to me.  My primary use for Skype is not for voice/video, but, in fact, messaging.  Ideally, it would be great to somehow communicate to others that I am available for messages instead of me needing to individually communicate to each of my contacts to reach out to me even if I am away.  Hopefully, that clarifies.  Unfortunately, not all folks understand that being away means that you still receive messages pushed to your phone.

  • Preserving audio level settings on Gigaworks S750

    I noticed that when the Standby mode is enabled on the Control Pod of the S750 amplifier, all the level settings are preserved when power is reenabled.
    However, when the main power rocker switch on the subwoofer/amp is turned off, those settings are lost. Too bad those settings aren't stored internally.
    Not sure about others, but I think it is a good idea to be able to power-down the entire system and have those settings preserved.
    BTW, exactly what does the Standby mode do? Presumably it conserves power but are there any other benefits?

    Yup, this has been noted a number of times by users.Another "would be nice" feature is a way to manually override the master level adjustment in the case where the control pod fails.Not sure about others, and I imagine this is a basic safety issue, but I find that when powered off, and than back on, the level settings are rather low.

Maybe you are looking for

  • Power Mac G4 - corrupted disk problem?

    The G4 will turn on, but I unable to log in. Tried rebooting. Lost Disk 1 and 2. Neighbor's friend repairs Macs and he suggested that I purchase Tiger and new hard drive. I purchased Tiger, but not a new hard drive yet (don' know what to buy!) Insert

  • Can't copy music to ipod ("cannot be updated... unknown error (-50)"

    Well, the last month has been pretty much a nightmare with my beloved ipod (60gb with video, and I'm using a Powerbook G4). My immediate problem is this: after transferring about half of my music onto my ipod (which I'm doing from scratch, because of

  • Default Current year in select option field on selection Screen

    Dear Experts, I want to set current year as default value in fiscal year select-options field on selection screen. for this, i hv written following code DATA:VAR_DATE TYPE SY-DATUM. DATA VAR(4) TYPE C. VAR_DATE = SY-DATUM. VAR = VAR_DATE+0(4). this r

  • Could anyone please help about print check??

    Dear expert, We are testing the print process in  OEM sample company but it did not print out and show that "The print document could not be started?" I have no clue how to solve this problem. The printer can print anything except this check, we are

  • Patching will affect custom reports in APPL_TOP

    Dear All, Currently we were in ATG RUP2 If we upgrade the patch level to ATG RUP7 in Applications (11.5.10.2), what and all will be affected? We have custom reports in the application tops (identified with custom naming convention XX prefixed, and pe