Preserving SOA Logical Ports and Trust Relationships during DB Refresh

Hi,
I have been searching for this for a while and have not had any luck so far. I thought maybe the vast experience in this community might be able to help me.
I am trying to preserve the SOA Logical Ports and the SMT1 Trust relationships of the target server during DB Refresh. Is there a list of tables that we could export (Much like exporting/transporting RFC Destination)?
Regards
Shantanu

Hi
Check the here under tables if they fits to your needs
Regards
SRT_LP                       Logical Ports
SRT_LP_FEAT            Logical Port Feature
SRT_LP_OP_FEAT     Logical Port Feature (Operation-Dependent)
SRT_LP_SXI_ADDR   Logical Ports: XI Addressing
RSECACTB                 Table for ABAP Access Authorization for Secure Memory
RSECTAB                    Secure Memory: Memory for Encrypted Data
RFCTRUST                 List of existing trusting systems
RFCSYSACL               List of permitted trusted systems for the current system

Similar Messages

Define Logical Port and Back-End Destinations for ESOA use of this config

Hi,
Please let me know what is the use of this config I am not able to get a documentation.
Define Logical Port and Back-End Destinations for ESOA

Hi Autobots,
Even I am looking for the same information. Did u get some headstart into the matter?
Pl provide me with the inputs too.
Cheers
Nikhil

Calling external Web Service: PI is looking for a logical port and proxy.

Hi,
My scenario is ECC Proxy -> PI -> External Webservice (WS adapter).
the Web service adapter fails with the error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I debug the message processing, it is looking for a port in table SSRVRTCONFIG, finds it(entry created automatically when WS adapter and the corresponding receiver agreement is activated in ID.
Then the program looks for an entry in "SRT_CFG_CLI_ASGN" for a proxy and logical port combination and errors out.
to be able to call an external web service, do we need a proxy to be created? I tried to create but the proxy creation fails because the external WSDL has some unsupported tags.
Also do we need to do any other configuration in SOAMANAGER? I am assuming not because the Web service is external.
Any help would be appreciated.
Thanks
Vijay

I already checked that note and made sure that the points mentioned are met. I have a trace set up on the target system and would know if the call reaches them and then fails in authorization. Right now the call doesnt even reach the target system and also from debugging I know that the program is looking for a proxy and then fails.

Logical port for client proxy

Hi,
when consuming a webservice i have to create a logical port and this port will be used when i create an instance of the proxy class e.g.
DATA: lo_proxy TYPE REF TO /ipro/co_bbp_cms_ibf_metadata.
CREATE OBJECT lo_proxy EXPORTING logical_port_name = 'E6S_300'.
The question is how could i know how the customer will name the logical port?
Is there a way to get a list of logial ports for a give proxy class?
Regards,
Christoph

the following table holds all the logical port for a given proxy class
SRT_LP
Regards
Raja

SOA Management - setting up logical port for WS

Hi
I'm trying to use the RepositoryFrameworkWS from abap.
During this i am setting up a logical pot for the webservice.
This is done through the SOA Management.
I find the consumer proxy CO_KMCWS_REPOSITORY_FRAMEWORK
I then try to create the logical port.
i use the wsdl
http://<server>:<java_port>/RepositoryFrameworkWS/Config1?wsdl&
when i apply the settings i get an error.
SRT Framework exception: The WSDL document is not compatible with proxy class "CO_KMCWS_REPOSITORY_FRAMEWORK": "Operation(s)Missing setGlobalConfig, resetSessionStatistic, resetGlobalStatistic, getSessionStatistic,
I know the operation i want to use(findResources). But I don't know how to set it up.
Can anyone help me ?
Best Regards,
Rasmus

Hi Rasmus,
Please check the Service definition in the WSDL URL given for Logical Port creation is same as the Service definition in the proxy CO_KMCWS_REPOSITORY_FRAMEWORK. It seems to me that some methods/ operations in th proxy could not be found in the Service definition in the WSDL URL.
Download the WSDL from the URL and open it using some tool and compare the Service definition with that of the proxy.
Regards,
Avishek.

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

Sharepoint and SSRS report trust relationship ssl/tls secure channel remote certificate is invalid

I have no experience with sharepoint at all. but this is what I observed.
I intermittently getting this error message on my sharepoint. could not establish trust relationship for the ssl/tls secure channel. Remote Certificate is invalid according to the validation procedure.
Screnshot of the error
This is how the sharepoint page layout.
I have report.aspx. and below is the content of the aspx file.
The url is http://sharepoint.COMPANY.com/Pages/Report.aspx.
The URL is intranet only.
The sharepoint is hosted in SERVER1 and the SSRS is hosted in SERVER.
I observed this error happens on both HTTP and HTTPS http sharepoint COMPANY com/Pages/Report.aspx OR https sharepoint COMPANY com/Pages/Report.aspx
So far, the step I did was to follow this blog http://krishnasangani.blogspot.ca/2013/06/the-remote-certificate-is-invalid.html Restarted
IIS in SERVER1 AND SERVER2. but the problem persist. Another I have done is to click the certificate in internet explorer and everything looks ok on that side to (certificate is valid)
It seems to only happen earlier during the morning, then it fixes itself around 9 Oclock. It has been on going for about 2 weeks. Please help troubleshooting this.
<%@ Page Inherits="Microsoft.SharePoint.Publishing.TemplateRedirectionPage,Microsoft.SharePoint.Publishing,Version=14.0.0.0,Culture=neutral,PublicKeyToken=71e9bsasdasdasd9c" %> <%@ Reference VirtualPath="~TemplatePageUrl" %> <%@ Reference VirtualPath="~masterurl/custom.master" %><%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bsasdasdasd9c" %>
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:547SF010-65B3-11d1-A29F-00457845FFSW"><head>

<title>Report</title></head>
A few questions I have in mind is Any pointer to troubleshoot this problem AND By looking at the ASPX file, Would you be able to determine what method is my Sharepoint page calling the SSRS report , integrated mode, native mode? IEFrame? The reason I am asking
this is that maybe IF I google using the right terminology I can get to the similar problem and solution.
Thanks

Please let us know if you are using
SharePoint communicates to an external service via HTTPS
Please try perform following steps:
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
In SharePoint Central Administration site, go to “Security” and then “Manage Trust”. Upload the certificates to SharePoint. The key is to get both the root and subordinate certificates on to SharePoint.
The steps to get the certificates from the remote server hosting the WCF service are as follows:
1. Browse from IE to the WCF service (e.g., https://remotehost/service.svc?wsdl)
2. Right click on the browser body and choose “Properties” and then “Certificates” and then “Certificate Path”.
This tells you the certificate chain that’s required by the other server in order to communicate with it properly. You can double-click on each level in the certificate chain to go to that particular certificate, then click on “Details” tab, “Copy to
File” to save the certificate with the default settings.
As an example, get both VeriSign & VeriSign Class 3 Extended Validation SSL CA.
reference : http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Java proxy client logical port transport to Q and prod issue in target addr

Hi All,
I have a java proxy client having a logical port (configured using NWDS) to consume a web service in the provider system.
In the logical port, I have given target address, and logical port name. While moving this client proxy NWDI dev track to Q and prod,
how do I change this target address to point to Q and prod respectively. In other words, even though I am using Visual admin to configure the destination url for the logical port, to point to Q and prod, its still referring to the dev environment provider service after moving the proxy client to Q and prod. What is the suggested approach to take care of this issue
Thx
mike

Hi Michael,
I can only help from that point of view that I believe this question belongs to the forum
Service-Oriented Architecture (SOA) and SAP
Please try to raise this question there.
Thanks and Regards,
Ervin

Change logical port during runtme

Hi,
i have program that read logical port of webservice and i want to know if i can change it during runtime from the default to other logical port ,
Thanks ,
Joy
Edited by: Joy Stpr on Jul 25, 2009 11:06 PM

I encounter the same issue in my project.
If changing logical ports of webservice during runtime is possible, we need not recreate the project archive when the logical port changed, and just modify a configuration file.
Can I do that?
Thanks in advance!

Service group, Destinations and Logical ports

I suppose that Service Group, Destinations and Logical ports
can be used to consumer a service in a specific system/landscape.
Is it correct ?
But when I use one or another ?
What are the differences ?

Hi
Service Group :identify a service provider.
Destinations and Logical ports : are the stuff which is required to setup the connections with the agrred service provider.
For example : As you how SOA is working , first we have to look for services once we found the required one or informed by the vendor itself , they will provide the credentials (this is something which contain port ,destination and password etc), once setup is complete we get the seamless services from its provider.
These thing are not seperate so donesnt make sence to use one or another .
BR
Satish Kumar

Hi skydiver, I have ios7.4, I tried two different USB ports and it still doesn't show,up on my desktops in my computer as iPad so I can't click it. If it was there I would open and see all my photos, and YES it ask me DO I trust this computer! several tim

Hi skydiver, I have ios7.4, I tried two different USB ports and it still doesn't show,up on my desktop in my computer as iPad so I can't click it. If it was there I would open and see all my photos, and YES it ask me DO I trust this computer! several times.
The apple tech on the phone, went to my control,panel
Went to my devices. Original iPad showed up,there In red and then he had me go,to apple website, download something and it said it could configure to my computer.
Is,finally answer,to me was go to the apple care,one on one appointment, and it's my "software"
A man I know told me "Apple at store, won't be able to do,anything for me"
That's not very positive.
What else? Can't I download iPad drivers,into my computer?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Example wsdl and logical port for consumer proxy anyone ?

Hi,
Could please somebody give me an example of external WSDL file and logcial port created for the WSDL file in SOAMANAGER ?
I need to create manually logical port for my consumer proxy and I am missing something because my logical port is not active.
Any example is more than welcome.
I need to know how to populate fields manually on the following tabs based on the info in a WSDL file:
Consumer Security Additional Information Web Service Addressing Messaging Transport settings Message Attachments Operation specifi
Thanks and Regards
Agnieszka
The message, I am getting, when creating logical port is:
Operation 'SrtFmStatefulTf' not found [NS: 'urn:sap-com:document:sap:soap:functions:mc-style']
I think that maybe something is wrong with my wsdl.
Edited by: Agnieszka Domanska on Nov 17, 2010 5:41 PM

Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh

Web service invocation problem on host hostname and port 8000 protocol : http logical port name : LP_WS_SMDAGENT_MONITORING

hello colleagues,
In the phase Connect Diagnostics dont show the Agent available in SLD, but when go to SLD i have the agents,
Error,
Connect Diagnostics Agent
The table does not contain any data
Agent availables in all SLD
SOAP:1.007 SRT: Unupported xstream found: ("HTTP Code 401 : Unauthorized")
Web service invocation problem on host hostname and port 8000 protocol : http logical port name : LP_WS_SMDAGENT_MONITORING
Thanks

OK, then pls follow below steps;
- Go to step 'Create Users' in solman_setup System Preparation scenario and make sure the user SM_INTERN_WS has a green status. Use the 'Test Login' button to make sure the user is not locked and has correct credentials maintained in solman_setup
- Immediately after checking the user status, navigate to Configure Connectivity->Enable Web Services and execute again the 'Create Logical Ports' automatic activity, in order to propagate the correct credentials to the Logical Port definitions.
- If the above operation is not successful, repeat the two steps above, providing a different user Id in 'Create Users' step, eg SM_INTERN_W1. This will prevent situations where the user gets locked by Logical Ports using an obsolete password.
Let me know the results.
Regards,
Vivek

ERROR: [DRC 23-20] Rule violation (NSTD-1) Unspecified I/O Standard and ERROR: [DRC 23-20] Rule violation (UCIO-1) Unconstrained Logical Port

I am attempting to follow the "after the out of the box" demo for the Zybo board. I am trying to generate a bitstream on vivado 2015.1 and I keep getting these two errors
ERROR: [DRC 23-20] Rule violation (NSTD-1) Unspecified I/O Standard - 96 out of 226 logical ports use I/O standard (IOSTANDARD) value 'DEFAULT', instead of a user assigned specific value. This may cause I/O contention or incompatibility with the board power or connectivity affecting performance, signal integrity or in extreme cases cause damage to the device or the components to which it is connected. To correct this violation, specify all I/O standards. This design will fail to generate a bitstream unless all logical ports have a user specified I/O standard value defined. To allow bitstream creation with unspecified I/O standard values (not recommended), use this command: set_property SEVERITY {Warning} [get_drc_checks NSTD-1]. NOTE: When using the Vivado Runs infrastructure (e.g. launch_runs Tcl command), add this command to a .tcl file and add that file as a pre-hook for write_bitstream step for the implementation run. Problem ports: gpio_rtl_tri_i[31:0], gpio_rtl_1_tri_io[31:0], gpio_rtl_0_tri_o[31:0].
ERROR: [DRC 23-20] Rule violation (UCIO-1) Unconstrained Logical Port - 96 out of 226 logical ports have no user assigned specific location constraint (LOC). This may cause I/O contention or incompatibility with the board power or connectivity affecting performance, signal integrity or in extreme cases cause damage to the device or the components to which it is connected. To correct this violation, specify all pin locations. This design will fail to generate a bitstream unless all logical ports have a user specified site LOC constraint defined. To allow bitstream creation with unspecified pin locations (not recommended), use this command: set_property SEVERITY {Warning} [get_drc_checks UCIO-1]. NOTE: When using the Vivado Runs infrastructure (e.g. launch_runs Tcl command), add this command to a .tcl file and add that file as a pre-hook for write_bitstream step for the implementation run. Problem ports: gpio_rtl_tri_i[31:0], gpio_rtl_1_tri_io[31:0], gpio_rtl_0_tri_o[31:0]
when first creating the project in Vivado 2015.1 i could not find the Zybo board in the list of boards to choose from. so i followed the "how to import Zybo board into project" topic located on the Xilinx community forum. Since i could not directly select the board some of the instrution for the demo had to be modified. In step seven i could not select the "apply board preset" box and in step 9 i could not assign "btn_4bits" and "sws_4bits" to the gpio blocks. The "After the box demo" can be found here
https://reference.digilentinc.com/zybo:gsg
Please help me with setting the I/O standards or importing the Zybo boards as one of the boards I can select insted of me selecting the properties of the board.
Thank you

Hi
As mentioned in the link (http://www.xilinx.com/support/documentation/user_guides/ug361.pdf), can you try the design with Vivado 2014.3?
Thanks,
Vinay

Preserving SOA Logical Ports and Trust Relationships during DB Refresh

Similar Messages

Maybe you are looking for