Update in disconnection document after reversal of demounted device by EG53

Hi everybody,
I have an issue reagardig diconnection document update. For instance if i make a device removal EG32 in a disconnected installation, the status of the disconnection document it is update with status 24 or 27.
So far so good, but if i make the reversal of the demounted device with EG53, the status of the disconection document remains 24 or 27 (no update to 21).
This is no good for the next steps in reconnection, because the device shows like iti is demounted, but in fact it is installed.
Please, a solution,
Thank you,

Hi Olivia,
Thank you for your reply, but this is not a solution, because the users uses EG53 for a year, and by the way EG50 doesn`t work - The status of the device doesn`t allow it.
The scenario it is like this:
1. He use EG32 to demount a meter - this will change the status of the disc, document to 27.
2. He use EG53 to reverse the demounted meter - this it is not related to the disc doc to change it to 21.
This is my problem because the disc document after EG53 remains in status 27.
And if we look at the device this is installed.
Thank you,
KR

Similar Messages

  • Credit Management System - Update of SD Documents after CMS start

    Hi,
    we are starting CMS functionality in our SD module. CMS (Credit Management System) works remotely by an XI connection. When we switch to use CMS in production system, we have to transfer all opened orders (not yet invoiced) to CMS system.
    How can we achieve it? Can program RFDKLI20 (t-code F.28) be used for this purpose? Does it require any settings to point out the CMS connection?
    Thank you
    /BR

    Hi Wojciech
    CREDIT MANAGEMENT
    Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
    An organizational unit that represents the area where customer credit is awarded and monitored. This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
    For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
    If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
    Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
    Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
    1. Transaction OB38
    Check which credit control area is assigned to the company code.
    Company code:
    Credit control area:
    2. Transaction OVFL
    Check which credit control area is assigned to the sales area.
    Sales area:
    Credit control area:
    3. Transaction XD02 or VD02
    Check which credit control area is assigned to the payer.
    Payer:
    Credit control area:
    4. Transaction SE37
    Is user exit EXIT_SAPV45K_001 being used?
    5. Transaction OBZK
    For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
    OB45, or the credit control area must be entered under the relevant company code in table
    T001CM of the credit control areas allowed.
    Company code:
    Credit control areas allowed:
    6. Settings for the credit checks
    7. Transaction OVAK
    Which settings do exist for the sales document type used?
    Sales document:
    Check credit:
    Credit group:
    8. Transaction OVAD
    Which settings do exist for the delivery type used?
    Delivery type:
    Credit group for delivery:
    Credit group for goods issue:
    9. Transaction OB01
    Credit management/Change risk category
    Definition of the risk category for each credit control area. This risk category can be
    assigned to a credit account by using Transaction FD32.
    10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
    screen. In particular, check whether fields "Reaction" and "Status/block" are set
    correctly. To carry out follow-up actions in case of a credit block, the credit check
    status must be set (field "Status/block").
    11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
    12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
    13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
    14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
    15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
    16. Transaction OMO1
    Which kind of update did you choose for structure S066?
    In any case, "Synchronous update (1)" has to be chosen as the kind of update.
    All other settings will lead to errors.
    Reward if useful to u

  • Update of SD Documents after Change in Risk category

    Dear Friends,
    I have a situation in Credit Management.
    Initially when the Customer master was set up, this customer was set as Risk category "New" to which the credit limit maintained is 1 USD.
    This customer is having now some Open Orders, Open Scheduling Agreements. The Risk category in the Sd documents is "New" No issues.
    Subsequently now the customer credit rating is improved and in FD32, the Risk category is changed from "New" to "A" which means customer is having some X (say 100,000 USD) amount of Credit Limit.
    My Question is How can I update the Old Open Orders and Scheduling Agreement with latest Credit data ? I tried F.28 or Prog RFDKLI20, but it dose not update the Risk category in old documents.
    Please help me if anyone knows any transaction or program.
    thanks
    Vinay

    Hi Vinay,
    Any change in the Credit master sheet, you need to run RVKRED07/77 for correcting the credit value. Hope this helps.
    Regards,
    Abhai

  • I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite.  When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

    I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite.  When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.  I am running Mac OS 10.10.1.  This only started happening when I installed the update of Adobe Acrobat.

    Hi MEW1,
    Is the printer connected wirelessly or wired?
    Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
    Close Acrobat and then relaunch it and see if it helps you while you do scanning.
    Regards,
    Rave

  • Where are my documents after Feb update?

    Have I lost my documents after the most recent update?  i was writing a book!!!!!! Help!!

    Which "update" do you mean?
    An update won't do anything with your files.
    If by "update" you mean you upgraded to Mavericks from another OS, then I have seen that some people create a new user account in the Setup Assistant. When they finish with the setup, they are logged into the new account, which is completely empty as a new account should be.  If this is what you did, log out (Apple Menu) and then log in as your old user.

  • TS1398 Hi. My wifi keeps disconnecting. I kkep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

    Hi. My wifi keeps disconnecting. I keep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

    Is this happening with one particular network or with all?  Make sure iOS is updated on the device.
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Reset Network Settings
    Go to settings/general/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).

  • How do we cancel or reverse    Disconnection Document

    Hi,
    I am new to ISU. 
    As per the requirement I am going for Re-connection when system receives payments from customer.
    I need to do certain validation and actions before actually going for Re-connections    such as
    if current status is  -    Disconnection Document open -No Service Order
          system status  -    1 (New, release unnecessary)
          Action              -    Cancel the Disconnection Documentmet
    My Query is  :   How do I cancel the Disconnection Document ?
                             Is these any function module / BAPI   for this.
    Could you provide me the Function module and its required parameters for the same.
    Thanks
    SKM

    Use this code to complete the disconnection document number. For disconnection document status 1, complete and cancel are the same thing.
    DATA: AUTO  TYPE ISU05_DISCDOC_AUTO.
    *     disconnection order-action
          AUTO-CONTR-USE-OKCODE    = 'X'.
          AUTO-CONTR-OKCODE = 'DARKCOMPL'.
      CALL FUNCTION 'ISU_S_DISCDOC_CHANGE'
           EXPORTING
                X_DISCNO       =  Disconnection Document No
                X_UPD_ONLINE   =  'X'
                X_NO_DIALOG    =  'X'
                X_AUTO         =  AUTO
    *           X_OBJ          =
    *           X_NO_OTHER     =
    *           X_DISCACT      =
    *      IMPORTING
    *           Y_DB_UPDATE    =
    *           Y_EXIT_TYPE    =
    *           Y_NEW_EDISCDOC =
    *           Y_INTERFACE    =
         EXCEPTIONS
              NOT_FOUND      = 1
              FOREIGN_LOCK   = 2
              NOT_AUTHORIZED = 3
              INPUT_ERROR    = 4
              GENERAL_FAULT  = 5
              OTHERS         = 6.
    Chaiphon

  • Tax field is not updated in COPA documents

    Hi
    There is a Value field for Tax is not updated in COPA documents due to missing configuration in KE4I. Now the tax field is updatating properly after completed the configuration in KE4I.
    But we have couple of COPA documents which are generated (source ) through SD billing. And we have entered proper condition type in Sales order. It is calculating the Tax amount based on condition type in sales order.
    Now we want to update the Tax value filed information into COPA documents .  Please let me know the procedure to update the Tax value field in COPA documents.
    Thanks
    Richa

    Hi,
    reverse/repost the docs again to CO-PA using KE4S.
    best regards, Christian

  • Item text (BSEG-SGTXT) is not getting updated in Payment document generated

    Hi All,
    Item text (BSEG-SGTXT) is not getting updated in Payment document generated through F110.
    After generating the payment document via Transaction Code u2013 F110, system is not updating the
    Text field (BSEG-SGTXT) in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
    In case of manual payment (F-53) we can input the text manually hence that will get updated in
    payment document but this thing is not possible with F110.
    How can I update it?
    Is there any configuration for that?
    Thanks
    Daniel Dorta

    Hi All,
    I've applied the two notes as recommended. However, when I run FBL3N for payment run items, the Text field is update with wrong data, i.e. not from the Text field in FB60
    Thus, I'll like someone to help me with what should exactly be done on the 'Step', 'Pre-requisite' and 'Substitution' side of the Substitution rule (TCode GGB1), I did not fill anything in the Pre-requisite box - is this right?
    Thanx in advance.

  • Item text is not getting updated in Payment document generated through F110

    Hi all,
    After generating the payment document via Transaction Code u2013 F110, system is not updating the Text field in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
    While processing the document via transaction code u2013 F110, in the layout shown for the Invoices to be considered for payment (screen of u201CEdit Proposalu201D), text is not getting updated. When we pressed F1 at the Text field (Which is blank) we came to know that it is a u201CItem Textu201D with u201CTable u2013 REGUEu201D /  u201CField u2013 SGTXTu201D.
    In BSEG (SGTXT field) as well as BSIK (SGTXT field) we are getting the Invoice document with the text maintained in it via MIRO or FI invoice.
    But while processing the invoices through Tcode - F110, in the layout of Edit Proposal (Table - REGUE / Field - SGTXT) we are not getting the u201CText fieldu201D but getting the other data such as Doc. No.( Table - REGUE / Field - BELNR), Fiscal Year (Table - REGUE / Field - GJAHR) etc for processing the proposal which is getting shown in BSEG as well as BSIK.
    In case of manual payment (F-53) we can input the text manually hence that will get updated in payment document but this thing is not possible with F110.
    Can anybody guide me on getting the ItemText (Not Doc. Header text) in FI payment document after F110 execution?
    Regards,
    Shridhar

    Hi Suresh,
    Thanks for the prompt reply. We will be obliged if you guide us in that respect since F110 is a Std. SAP code.
    Have you refer OSS before arriving at the conclusion of developing ABAP program since the Item Text is a std. field of Std. Tcode - F110. Same should had been get updated while making the payment in reference to the Invoice which haves item text in it ?
    Regards
    Shridhar
    FICO

  • Problem with Office 2013 documents after PC resumes from sleep

    Have a number of PCs in a work environment that exhibit the following error messages when they are woken from a sleep state and the user was working on a Word or PowerPoint document via a network share.
    PowerPoint error: The file you were working with was modified during suspend mode, and the original version is no longer available. <file path and name.ppt> must be re-saved.
    Word error: Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes.
    Having searched the error message I can see that hot fixes were created to fix the issue in Word 2007 and 2010, but nothing seems to relate to Office 2013.
    All the PCs have the latest OS and Office updates.
    I tried the NetworkAvailableTimeInSeconds reg fix from this link - http://support.microsoft.com/kb/2626998/en-gb , and obviously applied it to the Office 2013 key, but to no avail. The additional steps talk about applying the available hot fix, but this
    is not applicable to Office 2013.
    Information:
    All PCs Windows 8.1 Enterprise and Office Professional Plus 2013
    Any help would be appreciated.
    Thank you.

    I have the same issue with 8.1 and Office 2013, and yes, Office is at SP1 (15.0.4631.1002). I've likewise done the Reg fixes suggested for 2007/2010, but still have the issue. Any insight would be appreciated.
    Thanks,
    John

  • In update task & Express document Update was terminated

    Hi all
    Need help!
    Requirement: When i do confirmation through CO11N i have to do GI through a BADI.
    Solution: I have written a wrapper Update module(internally has /AFS/BAPI_GOODSMVT_CREATE) with Start delayed and called that module(in update task) in the method MB_DOCUMENT_BEFORE_UPDATE of the definition MB_DOCUMENT_BADI.
    It works fine when every thing is correct, but if GI fails its still confirms the confimation and "Express document Update was terminated" pops up when i push the back button. I have written a abort statement in the update module if goods movement fails. When i check SM13 it shows the reason for erroring out. But my requirement is to stop the complete transaction if GI fails and put the error message at the bottom of screen(CO11N)
    How can i do this?
    Appreciate any suggestions.

    Hi,
    I don't think that it is possible. It's too late to call rollback. The FM in update task is called after command COMMIT WORK. Here is a quote from ABAP documentation:
    If during the update an error occurs, the update work process executes a database rollback, returns the log record with a note into table VBLOG and informs the user whose program has created the log record by SAPMail. After removing the error cause, the returned log records can be updated again.
    So you should call that module only in case that you are 100% sure that it will be processed correctly.
    Cheers

  • Ipod disconnects immediately after being connected to computer

    Every time I plug my iPod into my computer it says "Connecting" then it says "Ejecting" and then "OK to disconnect"! WHY????? It does not show up in the sidebar in iTunes, and it does not show up in My Computer.
    I have plugged it into every USB port on my computer, none of them worked
    I have already updated iTunes.
    I have already put the iPod in disk mode.. that did NOTHING.
    I know it's not a problem with my USB ports, because other devices work JUST FINE in them
    I know it's not an issue with the USB cable because I plugged my iPod into another computer and my iPod did not disconnect right after being connected
    PLEASE help me get my iPod to work on this computer. And I don't want answers telling me to use the other computer. My Library is on THIS computer. Not only that, iTunes doesn't even work on the other computer.

    Reset the Bose device
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Lost payment method after reversing the payment and check

    Hi all,
    After reversing payment and check via FB08 , the payment method stored in payment document is cleared.
    does anyone know that why the payment method in the payment docuemnt is cleared after reversing the document ? and where can I chase back the payment method ? Thanks

    Hi Sreehari,
    Thanks for your reply. The configuration you mentioned have already been set. The payment method can be determined by vendor master when creating invoice and the payment method can also be stored in the field "payment method" in payment document. But the problem is the value of the filed "payment method" in payment document will be cleared after reversing the payment and cheque. As a result, we can't chase back the payment method in the reversed payment document.
    Regards,
    Ken

  • Exit or Badi to block document after Reset Cleared Items in FF.5

    Hi,
    When you run FF.5 and some rejected documents are returned by the bank, I have to block the document after reset cleared items with a especific payment block key.
    Anyone already done something similar?
    Tks!

    Hi Rao,
    <b>Userexits</b>
    VMDE0004     Shipping Interface: Message SDPACK (Packing, Inbound)
    VMDE0003     Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0002     Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0001     Shipping Interface: Error Handling - Inbound IDoc
    V53W0001     User exits for creating picking waves
    V53C0002     W&S: RWE enhancement - shipping material type/time slot
    V53C0001     Rough workload calculation in time per item
    V50S0001     User Exits for Delivery Processing
    V50R0004     Calculation of Stock for POs for Shipping Due Date List
    V50R0002     Collective processing for delivery creation
    V50R0001     Collective processing for delivery creation
    V50Q0001     Delivery Monitor: User Exits for Filling Display Fields
    V50PSTAT     Delivery: Item Status Calculation
    V02V0004     User Exit for Staging Area Determination (Item)
    V02V0003     User exit for gate + matl staging area determination (headr)
    V02V0002     User exit for storage location determination
    V02V0001     Sales area determination for stock transport order
    <b>Business Add-in</b>     
    DELIVERY_ADDR_SAP     Address Change in Delivery Processing
    DELIVERY_PUBLISH     Announcement of delivery data during database update
    Reward pts if found usefull
    Regards
    Sathish

Maybe you are looking for