Preventive Maint Plan for Similar Equipment

Dear ALL
I hv 100 similar tpye of equipment. I want to create one maintenance plan for all equipment and want to assign all the equipment in that paln.But problem is when i shedule the plan, plan date is same for all the eqipment but its not possible to comlete all the equipement in single day.
So how i map my all equipment in one maintenance plan when i shedule the plan diffrent plan date occur for different equipment.
Regards
Neelam

hi
For your requirement it will be better if you create seperate maintenance plan for different equipment, since the cycle or counter specified for the maintenance plan is common for all the equipments your planned date will be same .hence it is better to create individual plan for individual equipment
regards
thyagarajan

Similar Messages

Preventive Maint Plan Pending List

How to display the Preventive Maint Plan Pending List with column having maint plan,maint plan description,planning grp,functional location,plan date.

Hello,
Did you try IP16 ?
Cheers !

Preventive maintenance plan along with operations with frequency

Hi gurus,
I want tables or T code which can give me Preventive maint plan along with operations with frequency as a list view.
I tried ip19, ip24 but results are not satisfactory to me.
Can anyone suggest me the answer.
Regards,
Yogesh

Hi Bartlomiej
Do you have any solution for this?

Maintenance plans for Backward counter

Is it possible for having a preventive maintenance plan for a measurement point that counts backwards?
Your inputs on this will be appreciated!

Help !
I am looking for help with Counters and Timers and using them with a Maintenance Plan. We have about 10 count down timers mounted in one of our facilities. These timers are tied to the machine and measures the time until a mini or major PM will occur. These count down timers were previously used with the old CMMS system to assist in the scheduling of maintenance activities. We have recently converted them from the old CMMS to SAP PM but I am struggling with getting the count down timers to work in SAP. These timers are reset at 5000 hrs and as the machine operates, time is removed from the timer. A technician periodically reports these times to the system for scheduling purposes.
I have created the Measurement Point for a Functional Location.
I have identified that it is a counter.
I have it identified that it Counts Backwards.
When I try to assign this measurement point to a Maintenance Plan, I get the error "Only counters that run forwards can be entered"
How can I use the countdown timers to create pre configured (PM) work orders?
Thanks in advance.

Scheduling for certain Equipment only from a maint. plan

Hello,
I have maintained many Equipment as separate line item in a Main. Plan. While scheduling, I donèt see option to select certain Equipment only.
I would like to maintain one or few main. plan, one each for a set of equipment. And then call a few from that one set of equipment. E.g. Total Equipment 120,000. 10 types each 120,000. Thus 10 maint. plans. Call Type I/Maint. Plan 1 and Schedule 1-10,000 on Jun 1. Call Type 2/Main Plan 2 and Schedule 10,001-20,000 on Jul 1 and so on.
Any suggestion please!

There is no way to do equipment wise scheduling in IP30. you have to create separate maintenance plans equipment wise and try using sort field in additional so that you can schedule maintenance plan bit easily.

Options for a Weekly Inspection for an Equipment record using Maint Plans

Hi,
We have a requirement to create a Weekly Inspection for an equipment record.
Can anybody provide me what options are available through Maintenance Plans/Items/Strategies.

Why not create a single-cycle plan using a 7 day cycle.
You can then add multiple maintenance items for each equipment. Alternatively use one maintenance item and the Object list
PeteA

CBO generating different plans for the same data in similar Environments

Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1     COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     3607425     167760     5/02/2013 22:11
METER_CONFIG_HEADER     3658     80     5/01/2013 0:07
METER_CONFIG_ITEM     32310     496     5/01/2013 0:07
NMI     1899024     33557     18/02/2013 10:55
REGISTER     4830153     101504     18/02/2013 9:57
SDP_LOGICAL_ASSET     1607456     19137     18/02/2013 15:48
SDP_LOGICAL_REGISTER     5110781     78691     18/02/2013 9:56
SERVICE_DELIVERY_POINT     1425890     42468     18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     4133939     198570     16/02/2013 10:02
METER_CONFIG_HEADER     3779     80     16/02/2013 10:55
METER_CONFIG_ITEM     33720     510     16/02/2013 10:55
NMI     1969000     33113     16/02/2013 10:58
REGISTER     5837874     120104     16/02/2013 11:05
SDP_LOGICAL_ASSET     1788152     22325     16/02/2013 11:06
SDP_LOGICAL_REGISTER     6101934     91088     16/02/2013 11:07
SERVICE_DELIVERY_POINT     1447589     43804     16/02/2013 11:11
TEST ITEM 2     COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     9878     67     147     12982     869801     3553095
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     7291     2747     2     639     1755977     3597916
ASSET     SYS_C00102592     UNIQUE     2     12488     3733831     1     1     3726639     3733831
METER_CONFIG_HEADER     SYS_C0092052     UNIQUE     1     12     3670     1     1     3590     3670
METER_CONFIG_ITEM     SYS_C0092074     UNIQUE     1     104     32310     1     1     32132     32310
NMI     IDX_NMI_ID     NONUNIQUE     2     6298     844853     1     2     1964769     1965029
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6701     1923072     1     1     1922831     1923084
NMI     IDX_NMI_STATS     NONUNIQUE     1     106     4     26     52     211     211
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     12498     795     15     2899     2304831     4711808
REGISTER     SYS_C00102653     UNIQUE     2     16942     5065660     1     1     5056855     5065660
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     3667     1607968     1     1     1607689     1607982
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     3811     668727     1     2     1606204     1607982
SDP_LOGICAL_ASSET     SYS_C00102665     UNIQUE     2     5116     1529606     1     1     1528136     1529606
SDP_LOGICAL_REGISTER     SYS_C00102677     UNIQUE     2     17370     5193638     1     1     5193623     5193638
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     4406     676523     1     2     1423247     1425890
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     7374     676523     1     2     1458238     1461108
SERVICE_DELIVERY_POINT     SYS_C00102687     UNIQUE     2     4737     1416207     1     1     1415022     1416207
ENVIRONMENT B
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     8606     121     71     16428     1987833     4162257
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     8432     1780146     1     1     2048170     4162257
ASSET     SYS_C00116157     UNIQUE     2     13597     4162263     1     1     4158759     4162263
METER_CONFIG_HEADER     SYS_C00116570     UNIQUE     1     12     3779     1     1     3734     3779
METER_CONFIG_ITEM     SYS_C00116592     UNIQUE     1     107     33720     1     1     33459     33720
NMI     IDX_NMI_ID     NONUNIQUE     2     6319     683370     1     2     1970460     1971313
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6597     1971293     1     1     1970771     1971313
NMI     IDX_NMI_STATS     NONUNIQUE     1     98     48     2     4     196     196
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     15615     1273     12     2109     2685924     5886582
REGISTER     SYS_C00116748     UNIQUE     2     19533     5886582     1     1     5845565     5886582
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     4111     1795084     1     1     1758441     1795130
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     4003     674249     1     2     1787987     1795130
SDP_LOGICAL_ASSET     SYS_C004520     UNIQUE     2     5864     1795130     1     1     1782147     1795130
SDP_LOGICAL_REGISTER     SYS_C004539     UNIQUE     2     20413     6152850     1     1     6073059     6152850
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     3227     660649     1     2     1422572     1447803
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     6399     646257     1     2     1346948     1349993
SERVICE_DELIVERY_POINT     SYS_C00128706     UNIQUE     2     4643     1447946     1     1     1442796     1447946
TEST ITEM 3     COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation                       | Name                   | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|   1 | HASH UNIQUE                    |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 2 |   HASH JOIN                     |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 3 |    HASH JOIN                    |                        |     6 |   900 |       |   135K (2)| 00:27:04 |
|* 4 |     HASH JOIN ANTI              |                        |     1 |   137 |       |   135K (2)| 00:27:03 |
|* 5 |      TABLE ACCESS BY INDEX ROWID| NMI                    |     1 |    22 |       |     5   (0)| 00:00:01 |
|   6 |       NESTED LOOPS              |                        |     1 |   131 |       | 95137   (2)| 00:19:02 |
|* 7 |        HASH JOIN                |                        |     1 |   109 |       | 95132   (2)| 00:19:02 |
|* 8 |         TABLE ACCESS FULL       | ASSET                  | 36074 | 1021K|       | 38553   (2)| 00:07:43 |
|* 9 |         HASH JOIN               |                        | 90361 | 7059K| 4040K| 56578   (2)| 00:11:19 |
|* 10 |          HASH JOIN              |                        | 52977 | 3414K| 2248K| 50654   (2)| 00:10:08 |
|* 11 |           HASH JOIN             |                        | 39674 | 1782K|       | 40101   (2)| 00:08:02 |
|* 12 |            TABLE ACCESS FULL    | REGISTER               | 39439 | 1232K|       | 22584   (2)| 00:04:32 |
|* 13 |            TABLE ACCESS FULL    | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 14 |           TABLE ACCESS FULL     | SERVICE_DELIVERY_POINT |   675K|    12M|       | 9412   (2)| 00:01:53 |
|* 15 |          TABLE ACCESS FULL      | SDP_LOGICAL_ASSET      | 1178K|    15M|       | 4262   (2)| 00:00:52 |
|* 16 |        INDEX RANGE SCAN         | IDX_NMI_ID_NK          |     2 |       |       |     2   (0)| 00:00:01 |
| 17 |      VIEW                       |                        | 39674 |   232K|       | 40101   (2)| 00:08:02 |
|* 18 |       HASH JOIN                 |                        | 39674 | 1046K|       | 40101   (2)| 00:08:02 |
|* 19 |        TABLE ACCESS FULL        | REGISTER               | 39439 |   500K|       | 22584   (2)| 00:04:32 |
|* 20 |        TABLE ACCESS FULL        | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 21 |     TABLE ACCESS FULL           | METER_CONFIG_HEADER    | 3658 | 47554 |       |    19   (0)| 00:00:01 |
|* 22 |    TABLE ACCESS FULL            | METER_CONFIG_ITEM      | 7590 | 68310 |       |   112   (2)| 00:00:02 |
Predicate Information (identified by operation id):
   2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
   3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
   4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
   7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
   8 - filter("ROW_CURRENT_IND"='Y')
   9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
              SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
              SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation                            | Name                   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|   1 | HASH UNIQUE                         |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 2 |   HASH JOIN ANTI                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 3 |    HASH JOIN                         |                        |     1 |   176 | 56855   (2)| 00:11:23 |
|* 4 |     HASH JOIN                        |                        |     1 |   163 | 36577   (2)| 00:07:19 |
|* 5 |      TABLE ACCESS BY INDEX ROWID     | ASSET                  |     1 |    44 |     4   (0)| 00:00:01 |
|   6 |       NESTED LOOPS                   |                        |     1 |   131 | 9834   (2)| 00:01:59 |
|   7 |        NESTED LOOPS                  |                        |     1 |    87 | 9830   (2)| 00:01:58 |
|   8 |         NESTED LOOPS                 |                        |     1 |    74 | 9825   (2)| 00:01:58 |
|* 9 |          HASH JOIN                   |                        |     1 |    52 | 9820   (2)| 00:01:58 |
|* 10 |           TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER    |     1 |    14 |     1   (0)| 00:00:01 |
| 11 |            NESTED LOOPS              |                        |     1 |    33 |   116   (2)| 00:00:02 |
|* 12 |             TABLE ACCESS FULL        | METER_CONFIG_ITEM      |     1 |    19 |   115   (2)| 00:00:02 |
|* 13 |             INDEX RANGE SCAN         | SYS_C00116570          |     1 |       |     1   (0)| 00:00:01 |
|* 14 |           TABLE ACCESS FULL          | SERVICE_DELIVERY_POINT |   723K|    13M| 9699   (2)| 00:01:57 |
|* 15 |          TABLE ACCESS BY INDEX ROWID | NMI                    |     1 |    22 |     5   (0)| 00:00:01 |
|* 16 |           INDEX RANGE SCAN           | IDX_NMI_ID_NK          |     2 |       |     2   (0)| 00:00:01 |
|* 17 |         TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET      |     1 |    13 |     5   (0)| 00:00:01 |
|* 18 |          INDEX RANGE SCAN            | IDX_SLA_SDP_SK         |     2 |       |     2   (0)| 00:00:01 |
|* 19 |        INDEX RANGE SCAN              | IDX_A_SAPINTLOGDEV_SK |     2 |       |     2   (0)| 00:00:01 |
|* 20 |      TABLE ACCESS FULL               | REGISTER               | 76113 | 2378K| 26743   (2)| 00:05:21 |
|* 21 |     TABLE ACCESS FULL                | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
| 22 |    VIEW                              |                        | 90889 |   443K| 47021   (2)| 00:09:25 |
|* 23 |     HASH JOIN                        |                        | 90889 | 2307K| 47021   (2)| 00:09:25 |
|* 24 |      TABLE ACCESS FULL               | REGISTER               | 76113 |   966K| 26743   (2)| 00:05:21 |
|* 25 |      TABLE ACCESS FULL               | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
Predicate Information (identified by operation id):
   2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
              "SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
   4 - access("ASSET_CD"="EQUIP_CD")
   5 - filter("ROW_CURRENT_IND"='Y')
   9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
              SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
              SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PM

Hi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME     PNAME     PVAL1     PVAL2
SYSSTATS_INFO     STATUS     NULL     COMPLETED
SYSSTATS_INFO     DSTART     NULL     02-16-2011 15:24
SYSSTATS_INFO     DSTOP     NULL     02-16-2011 15:24
SYSSTATS_INFO     FLAGS     1     NULL
SYSSTATS_MAIN     CPUSPEEDNW     1321.20523     NULL
SYSSTATS_MAIN     IOSEEKTIM     10     NULL
SYSSTATS_MAIN     IOTFRSPEED     4096     NULL
SYSSTATS_MAIN     SREADTIM     NULL     NULL
SYSSTATS_MAIN     MREADTIM     NULL     NULL
SYSSTATS_MAIN     CPUSPEED     NULL     NULL
SYSSTATS_MAIN     MBRC     NULL     NULL
SYSSTATS_MAIN     MAXTHR     NULL     NULL
SYSSTATS_MAIN     SLAVETHR     NULL     NULL

How to display field SZAEH (Start Counter Reading) in IP01 for Maint Plan

Please let me know how i can configure field SZAEH (Start Counter Reading) to be displayed for data entry in IP01 for Maint Plan creation. I tried Tcode OIW0 but cou;dn't succeed.
ALl the help will be appreciated

Jain,
The start counter reading will automatically comeup in the scheduling parameter screen , if the maintenance plan is tied to a counter. Isnt this not coming up?
Regards
Narasimhan

FM or BAPI to change Maintenance plant and Planning Plant for an equipment

Hi Experts,
I need to change the Maintenance plant and Planning Plant for an equipment. Is there FM or BAPI available for the same?
Thanks,
Peri.

what doesn't it do the same ? it contains planning plant and maintenance plant which you can update ??
if you expect that SAP delivers custom functions for every possible question a developer has you can better search for an other job. SAP makes generic functions and you can use them for you're own sollutions.
it is also expected that you try to work things out for you're own sollution.
you can find sample code quickly enough if you search where the function is used
like RISTEQ01
kind regards
arthur

Does Apple have any plans for a similar app as Samsung S Drive?

Does Apple have any plans for a similar app as Samsung S Drive?
Samsung recently released 'S-Drive' - an app for their Samsung Galaxy program which only allows certain features to be used when driving. I much prefer my Apple iPhone, but as my children grow up, this is much safer. Thoughts?

Ah, sorry fellas, and thanks for clarifying that for me. I thought Apple would also have tech's who monitor / respond in these forums. My bad. Cheers though... and let's see what they (might) do.
Is there any way to encourage them / let them know of apps such as this and that it might be a good thing?

PP workcenter blocking by PM preventive Maintenance Plan

Hi Friends and Experts,
Giving the system cond "0" in Task list header data is not showing any impact on PP work center, i mean that PP work center is not getting loaded. This is working only when i mention 0 in the the header data of maint order.
Can we know whether a workcenter is planned for preventive maintenance on any sunday or holiday in advance before the maintenance order is created.
can any body throw some light.
Regards
guru

Hi Sankar,
Mentioning the PP work center in your Equipment Master & mentioning 0 in task list header of that equipment. So that when Maintenance Guy will create a Maintenance plan & assign the relevant task list to that plan, then immediately after scheduling you will be able to see the forthcoming dates when your PP workcenter is blocked for maintenance.
Regards,

PM- plant maint Prev-maint planning/ scheduling how ? change, add, etc

Dears,
appreciate your assistance.
we are having many PM work order in same near by area for related equip/ amchines. we like to generate one work order for all pms which are in limited area. if we get it we shall beable to generate one work order rather than ten work orders. how we can do it.
thanks
Mansoor.

dear Pushpa,
ya it is for palnt maintenance and for "preventive maintenance" planning and scheduling jobs.
u mean cover the equipments in equal number og maint-plans, cover all such plans in / under one maint-item.
now we have in way that one maint plan has more than one maint-item, and we are getting many work orders may be equal to number of maint-items, but our maint engineers want that all those being done at same time, so why not we make one work-order - but it should maintain equipment history.
i notice you are proposing opposit to what we have now.
In your proposed way will the equipment hisotry will be maintained for each equipment, that PM was called on --, planned for -- and completed on -- has been done.

How to take list of preventive maintenance jobs for every month- kindly hel

dear friends,
kindly help -how to take the list of preventive maintenance jobs for month basis.
kindly provide me T-CODES.
regards,
g.v.shivakkumar

Shivakumar,
Use transaction "IW38" to select all PM orders for the month. The selection can be based on specific "order type", Status ", "Equipment"/ "Functional Location" or " "maintenance plan" with period interms of date.
Hope this helps...Reward your points and close the thread.
Regards,
Prasobh

SAP PM - Deactivating/Dismantling Equipments - effects on Preventive Maint.

Dismantling a piece of equipment means uninstalling it from its current installation location. It may be done in order to:
1. Install it at a different location.
2. Indicate that the equipment is not in operational use and is going to be stored at some storage location for a while. Some other equipment will be installed in its place.
In case 2, the equipment is not subject to breakdown maintenance. However, preventive maintenance may still be carried out. The scheduled preventive maintenance plans will keep generating call objects for this equipment.
But, preventive maintenance may not be needed to be carried out for certian kinds of equipments while they are not in operational use. To stop generation of call objects agaisnt such equipments, we Deactivate the equipment master record alongwith Dismantling it. Call objects are not generated for equipments that are deactivated and hence no preventive maintenance will be carried out until they are Re-installed and Activated.
I need to know if we are handling things in accordance with standard practices by following the measures described above. Secondly, I am concerned about the validity of the assumption that whether preventive maintenance is needed for a certian uninstalled equipment depends on the kind of equipment it is (electrical, mechanical or whatever).
Any help in this regard will be highly appreciated.
Regards,
Farhan Shaikh

The question has been answered in EAM forum

How to design maint plans

Hi friends ,
I have one equipment for which different maint tasks i have to perform
Sr no      Check point description                    frequency
1     Replace Hyd pp RL filter                              4 weeks
2     Replace GB oil for X axis mechanism     3 months
3      Chk flywheel motor current                      15 days
4      Clean heat exchanger if outlet water temp is more than 70 degrees
5     Lubricate flywheel brg after every        200 running hours
Is it possible with one maint plan or i have to apply diff plans
Can i include all tasks in same task list
plz Suggest.

A maintainance plan has maitainance items.
Attach this equipment to each maitainance items & attach task list pertaining to each equipment.
But when you want to schedule them differently I think you need different maintainance plans with different cycle duration.
Edited by: Sujit Gujar on Nov 17, 2011 5:25 PM

Preventive Maint Plan for Similar Equipment

Similar Messages

Maybe you are looking for