Preview issues-sizing and cutoff slides

When I preview or publish a project, the edges are sometimes cut off. It doesn't show this when I create the slides, so I'm confused. How do I fix this?

Hi Christin,
Have you tried to uncheck the Advance project compression and Compress swf file in SWF size and Quality under Prefrences menu ( Edit > Prefrences).
Please keep the slide quality to be high and then publish the ouput as .swf and check .
Is this happening with your complete project or with particular slides?
Thanks and Regards
Himanshu Satija

Similar Messages

Preview issue (native and embedded via Safari) wth cut-paste and nested curly braces

Environment:
    OS X 10.6.8
    Preview 5.0.3 (504.1)
    Updates: current as of 0800 CDT 24 Jul 2011
         -- updates issued on 24 Jul 2011 are being applied but the changelog(s) do not mention this issue
    Any PDF document containing code fragments which have more than 1 level of curly-brace
Issue:
    Pasted text copied from PDF files is produced with lines out of order, line wrap and string breaks
    in unexpected locations, and partial lines appended in unexpected ways. This appears to be an
    issue with Preview since it can be reproduced by opening appropriate PDF content either in Preview
    or Safari with the canonical Preview support for PDF documents.
To Reproduce:
    1. Open the PDF with Preview or Safari
     2. Position and size the viewing window to avoid any display-pane-induced line wrapping.
    2. Drag-select the code block and paste into another document, the following have been tried with identical results:
        - OpenOffice (writer) 3.3.0 (OOO330m20 Build 9567)
         - Terminal 2.1.2 (273.1) (into a vi session in "insert" mode)
Results:
    1. Original end-of-line positions are not preserved.
    2. Line-wrap not preserved in original *or* visual aspects.
    3. Lines trailing the first closing curly brace for the first curly brace pair at greater than nesting=2 are out of order.
Example:
    original text: PDF download of O'Rielly document "JavaScript Cookbook"
     origin: downloaded from O'Rielly web site, 2011-07-24@15:49
        MD5 (JavaScript_Cookbook.pdf) = 9c6463ac28377bb69230536266369ccb
     source lines: page 335, lines 5-30
          <body>
          <svg:svg width="600" height="600">
               <script type="text/ecmascript">
                     <![CDATA[
                         // set element onclick event handler
                          window.onload=function () {
                              var square = document.getElementById("square");
                              // onclick event handler, change circle radius
                               square.onclick = function() {
                                   var color = this.getAttribute("fill");
                                   if (color == "#ff0000") {
                                        this.setAttribute("fill","#0000ff");
                                   } else {
                                        this.setAttribute("fill","#ff0000");
                    ]]>
               </script>
               <svg:rect id="square" width="400" height="400" fill="#ff0000"
               x="10" y="10" />
          </svg:svg>
          <body>
Copying this text from PDF form -- either in Preview or in Safari wth Preview doing the heavy lifting -- and pasting into a Terminal window running 'vi' in "insert" mode yields this:
          <body> <svg:svg width="600" height="600">
          <script type="text/ecmascript"> <![CDATA[
          // set element onclick event handler window.onload=function () {
          } ]]>
          </script>
          var square = document.getElementById("square");
          // onclick event handler, change circle radius square.onclick = function() {
          var color = this.getAttribute("fill"); if (color == "#ff0000") {
          this.setAttribute("fill","#0000ff"); } else {
          this.setAttribute("fill","#ff0000");
          <svg:rect id="square" width="400" height="400" fill="#ff0000" x="10" y="10" />
          </svg:svg> </body>
NOTE THAT LINE SEQUENCE 3-4-5-6 OF THE PASTED TEXT CORRESPONDS TO LINES 6-21-20-22 OF THE ORIGINAL TEXT.

Shocking.
But best to let Apple know of any issues. We're just users here.
If your part of the ADC then bugreporter.

Print Sizing and Quality Issues

When I print PDF documents I have issues with sizing and quality. I only have this issue with my Mac. Windows prints the files as they should be. I've tried two different printers, both over network. It doesn't matter whether I am in Adobe or in a browser. Basically it oversizes the documents and cuts off the edges. The quality on images and logos is severly degraded. This probelm existed in Lion and now in Mountain Lion. Any help?

What we need are the clip properties & sequence settings in Final Cut Express. Your screenshot is from a Finder window.
It would appear you have a clip with nonstandard frame size (1366x768) in an H.264 file. FCE cannot edit this material. FCE is limited to specific codecs and frame sizes. You need to convert your clip to QuickTime/Apple Intermediate Codec. If it's highdef widescreen then convert it to QT/AIC 1920x1080i. Try using MPEG Streamclip to convert the source clip.
You also need to be using a matching Easy Setup in Final Cut Express. If your source media file is QT/AIC 1920x1080i then you should select the AVCHD Apple Intermediate Codec 1920x1080i60 Easy Setup in FCE -AND- then create a new sequence before importing your clip into FCE and placing it in your sequence (timeline)

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

OrgChart and OrgPlanning sizing and productivity issues

Dear Experts,
Our customer is going to implement OrgChart and OrgPlanning solutions and having some concerns regarding sizing, productivity and some others. Could you please clarify the following questions?
1. If some objects or data are blocked in the moment of fetching from SAP to Nakisa (or Nakisa DB), how is it going to react on Nakisa? How will this affect sending idocs? And also while doing backward process: sending data from Nakisa if there blocked objects in SAP which should be updated or changed.
2. What is going to happen if objects/data are deleted from SAP back-end system while it’s being modeled and then transferring back into SAP from Nakisa?
3. In terms of OrgModeler: is it possible to create a position or another type of objects (basically duplicate one) choosing from the list of existing ones? Or if it’s creating then the only option you have is creating a new one with unique ID?
4. Are there any other formulas or advices on how to calculate sizing and hardware needs except what is described in Capacity Planning Guide?

Larry, thanks for the suggestions. I'll have to try them when I get home from work. I'm working with a 45,000 image library. Have now prepared about 155 Faces. Only a few Places so far. Nevertheless the wait in interminable when you are trying to get things done. I have to initiate an action and then click away and do something else while iPhoto churns away. I have Menu Meters showing the CPU in the menu bar. Most actions in iPhoto (particularly Face scanning)force both CPUs to 100%.
I imagine one of the features dragging the system down is the repeated Face scanning of the whole library. A future update simply has to include a setting to turn this action OFF when you are not interested in matching more Faces. As it stands, even to simply look at a Faces album initiates a full scan of the library (CPU 100%). While I appreciate the feature, there has got to be some way of turning it OFF when all you want to do is view photos.

Next and Previous slide from Flash Menu

We are currently tasked with updating SAP training that was
created with OnDemand software. The current simulations have a
Javascript menu on each screen which provides various functions
including moving from current slide to next or previous slides.
When the existing movie is played and captured, we lose the
javascript menu functionality.
I have created a Flash Menu and have imported it to the newly
captured Captivate movie. All links on the menu work except Next
Slide and Previous slide.
The script I use for the button for the Next slide is as
follows:
this.next_btn.onRelease =function(){
this._parent._parent..nextFrame();
Also I have tried substituting for nextFrame "play" and for
the target path "_root" for the first "_parent."
The variables "rdcmndNextFrame" and "rdcmndPrevious" do not
work unless you are using a playback bar, which detracts from the
simulation.
Has anyone ever created this type of functionality? It seems
that it would be straight forward. It is most likely a target path
issue. The captivate movie is the container for the flash menu. To
access the captivate movie timeline and move to the next or
previous slide is what I really need.
Help!

I resolved the issue by selecting to use a playback bar and
then in the Flash file setting the visibility of the playback bar
to "0".

RAM Preview issue

Hi,
I'm wondering if anyone has seen this or can provide some direction for further investigation. This is on a new Mac Pro on which I have just installed FCS
In some projects the RAM preview has no effect on playback performance. After generating a RAM preview, the project will play at the same speed (say 2 fps) and as soon as I pause playing, the green progress bar that indicates project is loaded in RAM disappears or becomes fragmented - without modifying the project in any way. When this happens it also becomes nearly impossible to do additional editing as every simple task (as simple as resetting the play range) can result in the spinning beachball. There was a recent thread on RAM preview issues (http://discussions.apple.com/thread.jspa?messageID=12215113&#12215113) but it appears the problem there was due to a long HDV project. The projects I experience this on generally have a lot of particles or replicated elements, but are standard 720 x 486 resolution projects lasting less than 10 sec. System memory usage is relatively small, less than 4 GB.
These issues arise on a recently purchased MacPro (3.33 GHz 6-Core, 16 GB RAM, ATI 5870). The boot disc is an OWC SSD, and user folders, scratch, etc are on separate hard drives. I installed the operating system on the SSD using the installation disc, and have manually installed all my programs from their original discs. (I initially used migration assistant to bring over applications, but that failed with some applications, so I wiped clean and started over). There have also been some past threads on how different hardware configurations can affect performance, but I don't seem to be doing anything abnormal here.
What I have done:
Tested ram using memtestosx
Verified memory usage through activity monitor. The projects I have tested on use up less than 4 GB of system memory
Before each test or comparison I reset preferences.
I do not have this flakey behavior with an older MBP (17" 2.93 GHz Core 2 MBP with NVIDIA 9600) running the same OS (10.6.4) and motion version (4.0.3). Running the same project on the MBP will take longer for the RAM preview to complete, but when it does, the project plays at full frame rate.
The upgrade to a MacPro was mainly for other CPU and RAM intensive applications unrelated to video or graphics, but I expected motion to show a nice performance boost over the MBP on this new machine. Anyhow, any insight or direction for further investigation that I should pursue will be appreciated.
Thanks.

I tried your project (nice, BTW), and yes, 20,000+ particles take some time to render. However, when I did a RAM Preview, I had no problems - after render it played at full speed.
UNTIL...
I selected the emitter. Then playback went to the pre-RAM-Preview speeds. As soon as I turned off overlays or made sure the emitter was not selected, the playback instantly sped back up to full speed. I believe this is because Motion needs to image the constantly changing outline of the emitter. This means it needs to be re-drawn every frame after Motion determines the extent/size of the 20,000 particles on their random journey.
I think this is backed up by the fact that near the end of your project, there are only a few particles to keep track of and the playback appropriately speeds up. Also, CPU usage vastly increases when I turn on the overlays.
Moral of the story? To ensure the quickest possible playback, turn off overlays (⌘/) or ensure that something like a particle emitter is not selected during playback.
Patrick

Preview issue. Send to iPhoto option is grayed out after Lion upgrade

Preview issue. Send to iPhoto option is greyed out after Lion upgrade.
In Snow Leopard it was an option to send pics from Preview to iPhoto, but now it is greyed out if I right-click on the pic. I have searced and tried everything, but I cannot fix it, so does anyone have a fix for it? Please :-)

I can offer no help but would also like to see this issue resolved. Firstly, it would be useful to know if this problem is seen by everyone. When viewing photos in Preview, with thumbnails in the sidebar, right-clicking on any of the thumbnails results in this:
Prior to the upgrade to Lion, "Send to iPhoto" was not greyed out and worked as expected.

Quick preview issues

I’m using a late 2008 MBP and SL 10.6.4 with AP3. After importing around 5000 RAW to a new project, quick preview in full screen isn’t working properly. Viewing the photos in full screen at full resolution is not an issue. Only when switching to quick preview, the image disappears and the screen goes black. When flipping through the photos in full screen and quick preview on, the photos flash up for a blink of an eye before the screen goes black again.
What I’ve tried so far is to delete and generate new previews, repair permissions and the library and rebuild the library. However, as a result all projects now have the same issue. Moreover, photos aren’t shared with other (iLife) applications. The projects in the photo browser in Mail as well as the control panel for desktop background are empty. Sharing with iTunes, i.e. syncing photos on my iPhone, doesn’t work (again, projects have 0 photos). Of course, sharing is enabled in AP preferences. I’ve read several articles about this sharing problem but the solutions posted didn’t work for me. As sharing uses the jpg files, I guess this is somehow related to the quick preview issue.
It seems that for some reason Aperture does not read the jpg files. Any ideas what else I can try to solve this? Thanks!

Unfortunately, I do not have a solution for you because I am struggling with a similar problem since the release of AP3. I have also experienced the blink of an eye appearance and disappearance of some previews. Also, sometimes the thumbnails and the preview pictures shown are unrelated, or the previews are scrambled. I have tried every AP2 to AP3 conversion strategy in the book; the result is always the same. Hope Apple finds a solution for this quickly.

Preview mode doesn't display slide shows

I have the most recent Muse CC v7.1 Build 329, and Mac OS 10.9.1.
My machine is an iMac 27 (12,2) with 24 Gb RAM.
Any slide show created in Muse fails to display in "Preview" and "Preview in Browser". I have also downlaoded the "Katie's Cafe" tutorial file, and the slide show in the final file also fails to preview in these 2 modes.
Once exported to HTML. there seems to be no problem in the website files. The inability to preview without going to these lengths is a problem.
Is there a solution?
Bob K

Hello Bob,
If you copy over the link/URL that you see in the browser's address field when you use Preview in Browser and then open that link in another browser, do you see the slideshow working?
Cheers
Parikshit

When we miss a call, the "Slide to Unlock" doesn't respond to touch. The only way out is to have someone call your iphone and then "Slide to Answer" will respond and once u end the call it will start responding to "Slide to Unlock" this started happening

When we miss a call, the "Slide to Unlock" doesn't respond to touch. The only way out is to have someone call your iphone and then "Slide to Answer" will respond and once u end the call it will start responding to "Slide to Unlock" this started happening after upgrading to IOS 7.
iphone 4S IOS 7.0.3.

In your first post you mention you have done a reset and a restore. Those are the last two processes in the user troubleshooting. If those do not work, then the last thing is to go to the Genius Bar. You say you went to Apple and they opened the phone and re-seated the connectors? That sounds unusual, because if there was a hardware issue,they would replace the hardware. You say you cannot get a replacement, is that because you are out of warranty? An out of warranty replacement is only $199 plus tax. It seems to me since you mention the fact you need to press hard to get the screen to react there is something going on with the hardware. If this problem has been going on for over a year, have you been reporting this to Apple. You say you cannot get a replacement and you are on the second phone, I wonder why they are denying you a replacement. Is there something you are not telling us??

RAM previewing issue

Hi,
I'm working in After Effects CS4, and I'm having a problem when I try to RAM preview short sections of an animation project. The RAM preview keeps stopping before it reaches the end of the work area, and beginning again. I'm pretty new to the program, but I've also noticed the little green bars that, I believe, tell you if the section has rendered/processed always have little gaps in them. That may be related. I don't know.
Does anyone know what may be causing this RAM previewing issue?
On a side note, I'm using After Effects on a Macbook (not a Macbook Pro), and I'm wondering whether this problem may be due to the Macbook not being sufficient for After Effects and CS4 in general. (I had originally intended to install the program on my 2004-era G5 tower, but it wouldn't install After Effects CS4 because apparently the program won't work with PowerPC processors, only Intel ones. At least that's what I was told.) Anyway, I've wondered whether the RAM previewing issue may be due to the Macbook not being enough computer for After Effects/CS4. My Macbook has a 2 GHz Intel Core 2 Duo, 2 GB 1067 MHz DDR3 and 106 GB of available space.
Any insights on the RAM previewing issue and whether my Macbook isn't a suitable computer for these programs would be greatly appreciated.
Thanks a lot,
Neil

From the theoretical specs there is nothing that speaks against your notebook. Apparently the biggest hurdle for some users is to get it to run in the first place, but now that it runs, it's safe to say that you will be able to use it properly. Of course, to let truth have its way, you will become slightly peeved at a point and get that yearning for a new machine, when you use more functions and your projects become more complex. Especially the only 2GB RAM will then often become a show stopper and you will really hate Adobe when one of those dreaded "Could not creat X x Y buffer" or similar out of memory warnings pop up. Still, no need to rush. Take your time and see, if AE is even everything you thought it would be and then make clear, structured plans for getting a new computer. You wouldn't wanna spend another 2000 bucks on a spiffy machine just to run AE once a month.
Mylenium

Aperture blank and title slides

I am having trouble with playback of all inserted blank and title slides in an Aperture slideshow. I just updated the program and this may have caused the issue. This even seems to be happening with slides i just inserted. Can anyone help?

having trouble with playback of all inserted blank and title slides
What exactly does "trouble with playback" mean? What does not work like you expect it to work?
And waht is your current Aperture 3 version?
Regards
Léonie

Known performance issue bugs and patches for R12.1.3

Hi Team,
We have upgraded oracle application from 12.1.1 to 12.1.3.
I wanted to apply the known performance issue bugs and patches for R12.1.3.
Please let me know for any details.
Thanks,

Are u currently facing any performance issues on 1213?
Tuning All Layers Of E-Business Suite – Performance Topics
http://www.oracle.com/technetwork/apps-tech/collab2011-tuning-ebusiness-421966.pdf
• Start with Best Practices : (note: 1121043.1)
• SQL Tuning
– Trace files
– SQLT output (note: 215187.1)
– Trace Analyzer (note: 224270.1)
– AWR Report (note: 748642.1)
– AWR SQL Report (awrsqrpt.sql)
– 11g SQL Monitoring
– SQL Tuning Advisor
• PL/SQL Tuning
– Product logs
– PL/SQL Profiler (note: 808005.1)
• Reports Tracing
– note: 111311.1
• Database Tuning
– AWR Report (note: 748642.1)
– ADDM report (note: 250655.1)
– Automated Session History (ASH) Report
– LTOM output (note: 352363.1)
• Forms Tuning
• Forms Tracing (note: 373548.1)
• FRD Log (note: 445166.1)
– Generic note: 438652.1
• Middletier Tuning
– JVM Logs
– JVM Sizing (note: 362851.1)
– JDBC Tuning (note: 278868.1)
• OS
– OSWatcher (note: 301137.1)

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted. I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists. Any idea what is going on?

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted.
I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists.
It felt as if maybe a virus was at work but I ran Sophos and found nothing.
I store images on my Drobo Raid system but when I work from my Macbook Pro I have no issues, just on the tower.
Any idea what is going on?

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

Preview issues-sizing and cutoff slides

Similar Messages

Maybe you are looking for