Preview module does not show ajustments

Hi everyone
This is a problem that has arisen very recently.
When carrying out adjustments in the develop module the preview image does not show the changes however the thumb nail in the filmstrip at the bottom of the screen does.
Can anybody help please as it is rendering the programme unusable.
Many thanks

Sorry Keith details as follows
What version of Lightroom? 5.4
Have you installed the recent updates? Yes
What operating system? Win 7 x64
Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive? Intel I7, 16GB ram, runs from 1TB D drive with 580GB of space
Has this ever worked before? If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? Recently added the following Dr Brown services, Adobe paper textures pro, Adobe watermark, Adobe emailer
Thanks

Similar Messages

Insert into viewobject in app module does not show entity validation errors

Hi everybody,
I am using JDeveloper 10.1.3 and ADF BC/ADF Faces. I want to have a button on one of page and I want that whenever user clicks on this button a records is inserted in a table. so I created an application module service method and exposed it on the client interface and the put it on my page using Data Controls Tab.
Here is some part of my code in application module :
public void setMember() {
HrMembershipsViewImpl membershipView = (HrMembershipsViewImpl)am.findViewObject("HrMembershipsView1");
HrMembershipsViewRowImpl newRow =(HrMembershipsViewRowImpl) membershipView.createRow();
newRow.setAttribute("MemberId",memberID); //this.getCode());
newRow.setAttribute("MembState","1");
newRow.setAttribute("CardState","1");
membershipView.insertRow(newRow);
trans.commit();
When this method tries to insert a record which violates a validation rule in the Base Entity Object, the screen does not show any error regarding to violating the business rule but nothing is inserted. I changed my code and captured the exception around the commit and I found that a JBO-27023 Exception happened after commit ( which was very surprise since the page does not show any error).
Now I can change my code to to the following to show that error happened.
public void setMember() {
try {
trans.commit();
catch (JboException ex) {
getDBTransaction().rollback();
throw new JboException ("There is an error during commit");
throw ex;
But I believe it shouldn't be like this. Normally, we should be able to insert programmatically in a view and if the business rules are violated we should get the violation error messages. If I use the above mentioned method we can not understand what business rules are violated.
Does anybody know what is wrong with my solution? I have seen a lot of times that using application module is the best way for adding functionality to the application pages but I really feel that something should be wrong if we can not get business rule violation messages.
Any help or references would be highly appreciated.
Thanks in advance,
Navid

Hello Navid,
it should work without try-catch.
1. When you add try-catch, does your error message appear on the page?
2. Does your page contains af:messages component?
3. Does your button have any navigation to another page?
Rado

4.2 Book module does not show photos, only pages and captions

Windows 7. I created a new master catalogue Imported one book catalogue and it worked fine. Next book catalogue, problem, no photos shown in book module. The cataloque I imported I had earlier exported and when I open that exported cataloque all photos are showing but not when imported into the new master catalogue. I did it twice first cataloque fine next one not. Thanks for any suggestions. Curt

There are some errors thrown into log when this happens.
Level
Source
Message
SEVERE
oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$1
node has no children at javax.swing.tree.DefaultMutableTreeNode.getChildAt(DefaultMutableTreeNode.java:243)
WARNING
org.openide.windows.WindowManager
[Winsys] TopComponent com.oracle.jdeveloper.nbwindowsystem.NbEditorContainer throws runtime exception from its componentActivated() method.
Please repair it!

Lightroom 6 Develop Module does not show photos, Library Module does show photos

This is what I see in the Develop module after installing Lightroom 6. Lightroom 5 runs fine on the same Laptop. Is this a GPU issue? Configuration issue? End user issue? I'm running a Lenovo T430 with Windows 7 Enterprise 64BIT. I purchased and installed LR 6.0 22-April-15.

I too have the same problem in lightroom CC as you ( after updating on 30/4/15 ) and have looked all over the internet. I had read something in the Adobe forum site suggesting a problem with the Graphics Processor, but it was not specific to our problem in lightroom. When I also checked photoshop ACR, it too showed the same as your screen shot. And all worked OK in lightroom 5 and photoshop 2014. It did not seem to make any sense at all ! I haven't unchecked " use Graphics Processor" option, but I will soon after I reply to you and had a rest after hours of trawling through internet sites looking for the answer. I use win 7 home premium desktop 64 bit on a 1 year old PC.
Thank you GrandpaCamera for your contribution, and a picture is better then a thousand words. By Michael.

Develop module does not show differences [was:develope application]

when i use the develope application in lightroom 5, it doesnt show me the differences/moderations.

This forum is only to discuss how the forums operate, not products
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/lightroom

Preview application does not print images correctly sized

The Preview application does not show me what size the image will print out.
It defaults to Scale to Fit: Print entire image.
The % in the Scale: window seems to be what the % turns out to be, depending on which Scale to Fit: is selected.
If I click into Scale:, and then change the %, when I hit Return, it prints immediately without allowing me to preview what size the change actually looks like. Need to change that behavior!!! Can't see how to do it.
Probably want the default setting to be Scale: 100% but can't figure out how to do that.
ALSO the Preferences / Images setting has two choices.
But playing with the Define 100% scale as just changes the size of the image in the Preview viewing window. The PRINT menu still has the same default and the same Scale: % size. No matter which I select, the PRINT default is still the same %.

OR....
https://discussions.apple.com/message/10689391#10689391
choiropiha
Dec 4, 2009 7:48 PM
Preview.app in Snow Leopard has removed the option to print without scaling, and recreating this behaviour with the remaining options is quite complex and requires 4 extra steps. Steps to Reproduce:
1. Open a document in Preview.app, such as a PDF, of a known paper size.
2. Select 'File' > 'Print…'
3. Change the paper size to one where the default scale value with the default 'Scale to Fit:' 'Print Entire Image' is not 100%. This step is often unnecessary, as many documents will require reduction to include margins, even if the paper sizes match.
4. Select 'Scale:'
5. Select the scale % value.
6. Delete the scale value.
7. Input '100' in the scale value box using the keyboard.
8. Press tab to avoid radar #7256827.
9. Click 'Print' Expected Results:
Click on a single option to print at 100%, if by chance that wasn't the default option. This would have been one step. Actual Results:
Does what it says. Steps 4 through 8 are necessary to print at 100% in most cases. Regression:
This behaviour was as expected in OS X 10.5.x and previous versions, or we wouldn't be having this discussion. Notes:
Printing at 100% is the only scaling that is common enough to warrant a button to make it an easy one to get to. Preview.app itself even has an 'Actual Size' toolbar button, but has removed this function for printing.
Graphic designers (and other professionals) or specific applications (such as printing on pre-cut or pre-printed paper, labels, or DVDs) can commonly require printing at 100%, and using PDF to distribute documents makes Preview.app the most logical choice for many printing jobs.
Having something other than 100% as a default can cause expensive media to be ruined by a mis-scaled printout, unless these 4 (+1) steps are followed every time.
Most other apps, including Safari, Mail.app and TextEdit default to no scaling, making Preview.app an exception. I am an architect and this is really annoying!
Does anyone know a workaround?

Face Time for mac does not show contacts window or allow me to sign in

My Facetime for Mac launches but does not show me my Contacts sidebar or allow me to 'Sign In'. Preferences is grayed out as well.
It works under a new user account (System Preferences > Accounts). I added a contact into the blank address book to test it out. I'm troubleshooting it right now to get it to work under my account, I think it has something to do with not fully accessing the keychain.
The tell-tell sign for me is when I launch FaceTime for Mac the preview window does not show immediately. I have to click on the app a second time for the window to appear. This does not happen under the new account
I have already:
- Restarted
- Removed preferences and Caches
- Re-installed Face Time
- Repaired and reset keychains
- Signed in under a different MobileMe account in System Preferences
Any other suggestions
Message was edited by: helps
Message was edited by: helps

SOLVED !!
After many, many more steps and close to total ruin of my MobileMe sync structure, I have the found the hidden files to remove that solved my problem.
~/Library/Preferences/.GlobalPreferences.plist
~/Library/Preferences/.GlobalPreferences.plist temp
~/Library/Preferences/.GlobalPreferences.plist .6Va7JFn [+these letters may be than different yours+]
Logged out, then back in again
When I launched Facetime it worked exactly as it does on my test user account.
here are the terminal commands to try for your solution
cd ~/Library/Preferences/
ls -A [+To get the letters for the third file+]
rm ~/Library/Preferences/.GlobalPreferences.plist
rm ~/Library/Preferences/.GlobalPreferences.plist\ temp
rm ~/Library/Preferences/.GlobalPreferences.plist\ .[+your letters+]
Please Post any problems you run into or if it doesn't work.
Message was edited by: helps

The library module in 4.3 version does not show all the images

The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do? Get this fixed now!!!!!!!!

My bet would be on a corrupt preview folder.
Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews. See if that fixes it.
If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Print Preview in routing does not show text

Good morning all...
We have a user who is attempting to preview their print job, and currently the print preview function in the routings does not show the standard text. It displays the page number but nothing else.
I am trying to obtain more information from the user now, but was wondering if this is something that anyone else may have run into. I will be updating this message with more details as I obtain them.
Thanks!

Hi Matt could you please tell me how do you solve your issue? I have the same and I cant find the solution.
Thanks a lot
Kind Regards

HT4075 when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

ARQ: Role Import does not show roles in the preview

Dear All,
Recently I upgraded our system to SP#14. Now when I try to import roles from NWBC->AM->Role Mass Maintenance->Role Import, it does not show roles in preview. Also, it does not import the roles specified. (either a range or full name of the role). It does not even give any error message.
I implemented SAP note#1897975 Role import does not show roles in the preview.
Still facing the same problem. Has any one faced this problem? Please suggest.
Regards,
Faisal

HI Faisal,
This note(1897975) you have to implement in Plug-in System, try to check the same once and let me know if it resolves our issue.
Regards,
Neeraj Agarwal

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

Preview module does not show ajustments

Similar Messages

Maybe you are looking for