Price analysis in webshop not working

Hi,
Our requirement is to display price analysis in an internal webshop as the business would like to understand how pricing is working.
I have set the enable.pricing parameter in XCM to 'true'. We made the following changes in the web.xml --
<context-param>
<param-name> priceAnalysis.isa.sapmarkets.com</param.name>
<param-value>true</param-value>
I also added the prc_trace parameter to the user parameters.
One old SAP note had mentioned changes to 2 parameters (priceAnalysis and enable.Price). When we made this change to the web.xml, we were able to see the price analysis in the product catalog (in the form of a hyperlink on the price in the page that gets displayed when one drills down in to the product hyperlink).
However the price analysis in the shopping basket or the order (in edit mode) is not working.
Does anyone have any ideas on what we might have missed?
Any helpful replies would be appreciated.
thanks

Hi Easwar,
we initially made the change only to the UI component through XCM. After a server bounce, no changes were seen on the webshop.
Then we added the code as per the old SAP note (which mentioned changes to 2 parameters). Price analysis started working for the product catalog after re-starting the server in visual admin. It was still not working at the shopping basket/order level.
This was the code --
<context-param>
<param-name>enable.priceAnalysis.isa.sapmarkets.com</param-name>
<param-value>true</param-value>
<description>Turn on IPC price analysis</description>
</context-param>
<context-param>
<param-name>priceAnalysis.isa.sapmarkets.com</param-name>
<param-value>true</param-value>
<description>Turn on IPC price analysis</description>
</context-param>
We then tried commenting the first part but this made no changes. Commenting the entire code again has resulted in no hyperlink on the price of products in the product catalog.
regards,
Jaya

Similar Messages

Analysis Authorization Object not working

Hi Gurus,
I m working on BI 7.0, I have created an analysis authorization object zz_div for 0DIVISION characteristic.
For a given report i want a given user to view only data for '32' and '33' 0DIVISION.
I have followed the below steps but still the report shows all data instead of restricted one.
1)RSECADMIN -> Maintenance ->zz_div ->Create
2) Add 0DIVISION in Auth structure , and in details
I     EQ     32
I     EQ     33
3) Add 0TCAIPROV with I     EQ     0SD_C03
4) Add 0TCAACTVT, 0TCAKYFNM, 0TCAVALID, this having details as
I     CP     *
5) Then in User tab -> Assignment -> User -> Change-> Inserted ZZ_DIV-> Save
6) In Query created a Authorization variable(with no input prompt) and restricted 0DIVISION.
Following are the authorization object in that user's Role (Reporting Only)
S_RFC
S_TCODE
S_GUI
S_BDS_D
S_BDS_DS
S_OC_SEND
S_RS_AUTH - only having zz_div
S_RS_COMP
S_RS_COMP1
S_RS_ICUBE
S_RS_RSTT
S_RS_TOOLS
S_RS_PARAM
I have surfed lots of thread for this issue but not getting a solution
Tell me what i m missing in above or any additional setting need before creating analysis authorization
Edited by: Sonal Patel on Apr 18, 2009 8:10 AM

Hi
Thanks a Ton for ur reply
I have checked in SPRO : Analysis Authorization
where the authorization mode is " OLD obsolete Concept With RSR Authorization Objects "
We have to do the same in Production system .Can u please how its going to effect to others authorizations if change it to New Concept
Thanks
Sonal....

Hierarchy Analysis Authorization does not work after transport

Hi Gurus,
I am facing a issue in hierarchy analysis authorization in quality system but the same authorization works perfectly fine in development.
All hierarchy authorizations works in Quality except for this one. I found one old sap note describing this as program error but this note is not applicable in BW 7.3.
I have checked the table RSECVAL, RSECHIER and authorization is active so everything looks good. Please advise if anyone faced this issue after transporting hierarchy auths to other systems
Regards,
Salman

Salman,
What I understood from your description is that you have same role+AA in Dev and QA, which provides access in Dev for all the nodes for said hierarchy but in QA, same role+AA provides access to the same hierarchy for all the nodes but one. Try to create a ZTEST analysis authorization in QA itself with access for the problematic hierarchy node and see if it works ? This will rule out the case if there is a difference in hierarchy in DEV & QA.
Regards,
Shivraj Singh

SQL Injection analysis report does not work.

I have tried to run the SQL Injection report (Home|Utilities|Object Reports Security|QL Injection but it comes up with the following message.
"SQL Injection analysis is not supported with your current database version. It is only available for Oracle release 10.2 or higher."
I have tried this as both an ordinary user and as system, on both Windows XP and Linux

This is a bug in the XE Beta. The SQL Injection Analysis will not be accessible for XE production.
Joel

Excel export in analysis for olap not working

Hello!
I want to export from analysis for olap 1.1 to an excel file.
First I clicked on the export button, then I chose the wanted compontents and clicked ok.
But there happens nothting, but a new browser window opens and closes itself immediately.
Neither a dialog opens and asks where I want to save this excel, nore I found a related excel-file in my system.
Any ideas on this problem?
Regards,
Kathi

Hi Kathi,
finally we solved the porblem. i guess you are working with IE 8.0?
*if so, add the BO-Server (http://server.com) to your lokal intranet sites (inside the IE 8.0).
*also check document mode in IE 8.0 is set to Quirks Mode (under ''Tool/Developer Tool'') when opening the analyis olap report
then it should work.
regards
Tom

Risk Analysis in CUP not working

Hello Experts, we are using GRC 5.3. In CUP, I am trying to approve Role Provisioning. One of the requirements is to run Risk Analsys (as it says 'Risk Analysis is Mandatory'). When I hit the 'Risk Analysis' button, the circle keep circling but, nothing seems to happen forever (no error message either). Can you guide me in the right direction? What could be the possible situation? And, where am I better off to start troubleshooting.
Thank you.

Well, the problem seems to be that I am connecting from VPN. From my analysis, after I reboot the laptop, I am able to analyze risk for the first 3 or 4 requests and after that I can't do risk analysis for any more requests until I reboot my laptop. If I login to a remote server (say Virsa server), I seem to have no problem at all. i am able to continuoiusly run risk analysis for multiple requests. The problem seems to be VPN or my laptop.

Analysis Authorization not working - Empty demarcation

Can someone help me on this Analysis Authorization? I read many threads in SDN, it seems that I followed the correct steps. The restriction on S_RS_COMP is working well but the restriction on the Analysis Authorization is not working. Surely I'm making some mistake, but can't find what's wrong.
I'm a User (say USER_00) in a test system, assigned to a Role (say Z:BI_USER). This is a broad role:
- S_RS_COMP and S_RS_COMP1 have full authorization (*) to all the fields,
- S_RS_AUTH has the BIAUTH field with Name of Authorization = *.
Also I have an InfoArea (ZIA_TEST) and an InfoCube (ZIC_TEST). The IC has some characteristics and key figures. The only authorization relevant characteristic is ZCA_CLI (client). The IC has only 5 lines, one for each client ("CLI_01" to "CLI_05").
Also there's a query (ZQR_TEST) on this IC, with an Authorization Variable (VAR_AUTH_CLI) restricting the characteristic ZCA_CLI.
I'm trying to create a new User and restrict him to this IC and only to the data of client "CLI_01". If it works I'll apply to a production system.
What I did:
1) With tcode SU01 created a new User (USER_01) with no Role neither Analysis Authorization.
2) With tcode PFCG copied the Role Z:BI_USER as Z:ROLE_TEST then made some changes:
a) S_RS_COMP
- Activity = 03 and 16
- InfoArea = ZIA_TEST
- InfoCube = ZIC_TEST
- Type of report component = *
- Name of report component = *.
b) S_RS_COMP1
- Kept * to all fields.
c) S_RS_AUTH
- I inactivated and deleted this Authorization Object.
(I don't want to keep characteristic values restriction inside the role. The idea is to associate different users to the same role, allowing them to see the same ICs and execute the same queries. And differentiate wich characteristic values each one can see by manually associating different analysis authorization to each one.).
3) With tcode RSECAUTH I created an Analysis Authorization (Z_AA_CLI_01) to restrict access only to client "CLI_01":
- ZCA_CLI = "CLI_01"
- 0TCAACTVT = "03"
- 0TCAIPROV = "ZIC_TEST"
- 0TCAVALID = "*".
4) With tcode PFCG I assigned User "USER_01" to the Role " Z:ROLE_TEST" and made Complete Comparison.
5) With tcode RSU01 I manually assigned Analysis Authorization " Z_AA_CLI_01" to User "USER_01".
It seems to me that these steps are enough. But:
a) When I log as USER_00 and go to tcode RSRT2, searching by InfoAreas I can see all the InfoAreas and all the InfoCubes, select and execute the query. That's OK.
b) When I log as USER_01 and go to RSRT2, searching by InfoAreas I can see only ZIA_TEST and under it I can see only ZIC_TEST. That's OK. Then I select and execute the query.
Wich means that S_RS_COMP is OK and each user is assigned to the correct Role.
c) The problem is that in both cases the query brings data from all Clients.
Under Information and Variable Values (when I run with HTML display) the message is "Empty demarcation".
I changed the variable to be Ready for Input, just to see wich values it brings. In both cases (as USER_00 and as USER_01) in the Variable Screen it brings all the 5 Clients from the IC and I can select and execute any value.
So the problem is with the Analysis Authorization or with the Variable, but I can't find what's wrong.
Any help will be very appreciated.
César

OK Marc, it worked.
Sorry for not answering earlier, but I could get back to this front only some days ago, then began testing your suggestions.
1) Security Concept
Authorization Mode was set to "Obsolete Concept with RSR Authorization Objects" (it would never work with this setting).
I changed to "Current Procedure with Analysis Authorizations".
Anyway, what's the function of this setting? Do old Reporting Authorizations work with "Current Procedure with Analysis Authorizations" setting?
2) Variable Representation
With "Multiple Single Values" it really led to problems.
With "Selection Option" it worked well.
3) 0TCAKYFNM
I don't understand why, but if the AA doesn't have the char/dimension 0TCAKYFNM, when the User tries to run the query (tcode RSRT2) it accuses "You do not have sufficient authorization".
Info Cube ZIC_VE95 has two KFs (ZKF_QTL95 and ZKF_VLT95). These KFs are used only on this IC (also in the KF Catalog, but it doesn't impact). This IC is used only on Query ZQR_VE95 (also in Transformation and DTP, wich doesn't impact).
Well, I inserted 0TCAKYFNM and it worked, either with CP, "*" or with EQ, the two KFs.
4) Authorization Policy Definition
The situation I'm working on is very typical. Ex.: Some users are Administrators, Managers, Operator 1, Operator 2 and so on. Each Role needs authorization to access some queries. At the same time, they can access information only of the Cost Centers to wich they are related.
There are many ways to implement it (I tested some of them and they worked well). My point is to define a most practical way, easy to understand and to maintain.
I'm now sympathetic to this way:
a) Create functional Roles (ex.: "Administrator", "Manager", "Operator 1", "Operator 2" and so on) defining only the Queries (or Info Areas, Info Providers, etc) each Role needs. No S_RS_AUTH definition.
b) Create Char Value Roles (ex.: "CC_100_to_199", "CC_200_to_299", etc), only with S_RS_AUTH definition, each one associated with a corresponding AA (ex.: AA for CC 100 to 199, AA for CC 200 to 299 and so on).
c) Create Composite Roles associating functional and char value Roles. Ex. Composite Role "Administrator for CC 100 to 199", composed of the Roles "Administrator" and "CC_100_to_199".
d) Associate Users to the Composite Roles.
Anyway, I'd appreciate if you could indicate some literature (blogs, articles, etc) on this theme.
Well, thank you very much for your answers. Now I can go on with my studies on this subject.
César Menezes

RRI jump to BEx from EP is not working

Friends,
We have configured BI admin cockpit. When I click on any iView and then Go To->,
all the jumps to Web GUI (tcodes) are wroking fine. But jump to BEx web application is not working.
Go To-> Infocube Status : Analysis, * Analysis.. are not working. It shows "This page can not be displayed".
But those templates are available in the system.
If I try the same web applications from RSRT tcode, the RRI is working fine.
Please help..
Joe

Hi Joe,
Below link will helps you to solve the issue...
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330
If not please take help from your admin guys(Basis people)
Regards
Sudheer

Customer hierarchie HIENR01 not filled in price analyse

Hello,
I created a new price condition for the customer hierarchie and I also tried it with the sap standard condition type HI01.
Both are not working, because the field customer (hiearchie 1-7) is not filled. I can only see an exclamation mark in the price analyse for the condition.
Does anybody know what I forgot???
Thanks
Nicole

Solved this task myself.
The characteristics I had to use in table sales_cfgs_value for FM SD_SALESDOCUMENT_CREATE were:
EXPRESS_ORDER - Y/N
PDF_PROOF - Y/N
POS1_ID_W - TOP/BOTTOM
POS1_NR_OF_COLOURS_KB - 1
POS1_PRINT_CODE - P1
POS1_USE_W - Y
REPEAT_ORDER - Y
ITEM_COLOR_NUMBER - 17
COLOR_XX_QTY - 100
Now the FM is returning the startup price, the variable costs and the manipulation costs.

BEx formula change not working in existing Analysis for Olap/Analysis for Excel reports

Hello all,
I posted this in Analysis for OLAP, but there has been no response so I'm hoping perhaps you BEx experts can help me.
I had to modify a formula in a Bex query to have it calculate the results of the formula by summation.
I checked the query using BEx Analyzer and it summed correctly. If I create a new analysis for olap report, it sums correctly.
If I modify an existing report, it does not pick up the change. Existing Analysis for Excel reports also do not pick up the new summary calculation.
Using the CMC, I edited the connection and reselected the Bex query, but that did not work either.
Here it is working in the query:
Line Discount is a formula with logic checking to see if "product list price total amount" is 0, set the line discount to 0; otherwise calculate it as "product list price total amount" - Net Sale. So the total needs to sum of the line discounts (0+2820+2820 = 5640) and not be the Overall result "product list price total amount" - Overall Result "net sale" (13960-96720= -82760).
Here it is in an existing Webi report - working:
Here is what is happening in an existing Analysis for OLAP report - not working:
I also tried to unselect Line Discount as a key figure from the existing report and reselect it, but that did not work.
I'd like to find a solution so that all the reports that use this query won't have to be rewritten.
I'm on BW 7.0 EP 1 SP 10 and BI 4.0 SP7 Patch 5.
Thank you for your help,
Susan

Hi,
Apply Exception aggregation on line discount formula--Exception aggregation as Total---Reference characteristic as Promega product.
Make sure to refresh the webi report once after the changes has been done.
If this does not work then you can apply summation calculation for that column at webi level as well.
Regards,
AL

Web Analysis is not working

Hi,
I recently installed Hyperion BI+ in my server and I'm trying to do some reports in Web Analyzer.
My installation and configuration went successfull.
I can open FR, IR ..
I'm trying to open WorkSpace and Web Analysis...
both are not working...
When Im trying to open web analysis using the below URL Im getting error..
http://<servername>i:19000/WebAnalysis/WebAnalysis.jsp
but when I'm using this URL http://<Servername>i:16000/WebAnalysis/WebAnalysis.jsp
I can see the open page.. but the Web Analysis window is not coming.. I'm getting blank page...
and for workspace also.. when I'm using 45000 port.. it is working but I cannot open any reports.. some debug error is coming..
when I'm using the default port 19000.. Im getting network error...
Please help me in this issue..
Do I need to do any modifications in my configuration or property files....
my Java application is Tomcat(default).. databases is Oracle 10G Enterprise Edition.

Hi,
Regarding Web Analysis- I believe- It's a problem of JRE.
- Just remove/uninstall the JRE from your Currently installed Programs. You may want to reboot the m/c
- Open Web Analysis Studio in the Web browser. Now, since it can't find JRE, it'll set up the relevant JRE for you & you may continue using Web Analysis.
- Please note- Unless you've changed to a different one during configuration, Web Analysis operates on 16000 port.
Check the following regarding Workspace-
- Your service may be down, thus, throwing Network error
- You may've to re-configure Workspace. Start the service & wait for few mins. before opening Workspace.
- Natesh

Web Analysis functions not working in Workspace

I am looking for a list of Web Analysis functions that are available in the Java client that will not work in the Workspace DHTML client (Version 9.3.1.0). Any guidance would be appreciated.

There are 4 types of differences:
- font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
- Service Buttons are very restricted using Workspace
- Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
- Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm
Cheers
Iain

Calc defined in Web Analysis not working properly with substitution vars

Hi all,
Most likely many of you have already faced this, and I would appreciate any guidance. Most likely is a rookie mistake.
1.- We have a couple of substitution variables in Essbase, CurrYear and PrevYear
2.- We can see those substitution variables perfectly in Web Analaysis, when designing the report ($CurrYear and $PrevYear) for the Years dimension
3.- We use this susbtitution variables into a calculation defined in Analysis Tool (i.e $CurrYear:Actual / $PrevYear:Actual) where 'Actual' is the value for scenario.
4.- The value of the substitution variables is changed in essbase (i.e. CurrYear equals FY10 and Prev Year equals FY09) to update for the current year
5.- In the reports, whenever we use $CurrYear and $PrevYear, outside a calculation defined in analysis tools, it works properly
6.- However, the calculations defines as in (3.-) before, do not work. I get 'value not found'
7. If I 'refresh' the formula in the calculation, by editing it and taking out/reentering the operands again, it now works.
We have tried restarting Web Analysis services, but we still get the same behaviour
We have several of this calculations in about 15 reports, so, even while it is manegeable, the idea of using the substitution variables was to avoid this.
We are using Hyperion 9.3.1
Thank you in advance to anyone who can point me in the right direction
Hector

Hi,
Oracle support recommended that we apply patch 9.3.1.3, since they were unable to replicate in their environment with said version. After applying the patch, we still have the same problem, they are further investigating.
Regards,
Hector

I just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all steps but its not working its lockt to 3!

i just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all steps but its not working its lockt to 3!

sorry my english is very cash I think we got the paper on the lock operator and we have done all the steps but it will not play if it is unlocked, bought locked to three paid 350kr

Reporting and analysis not working in workspace

the startup document specified does not exist in the repository. select a new startup document on the general preference tab.
when i click ok
a not found error occurred communicating with server
click show details
uri: http://server:19000/raframework/conf/toolsconfig.xml
state 404 not found
and then when i click preference, the reporting and analysis framework seems to be not working because for example for financial reporting and web analysis, we can see things like $(/raframework.....epmstatic/raframework.....etc)
any help would be fine regarding waht i could have done wrong
thanks

Has it ever worked, have you checked the logs, have you logged into Oracle Support and had a look the documents available e.g. 1422178.1
Cheers
John
http://john-goodwin.blogspot.com/

Price analysis in webshop not working

Similar Messages

Maybe you are looking for