Price iterative calculation

Dear All
I have the below error message after i ran the price iterative calcuation (KSPI)
Diagnosis
The activity quantities planned for cost center ABP1-4504, activity SETM45 are not reconciled for period(s) 1 - 12. The plan activity for activity type SETM45 is less than the plan activity input for this activity type through the receivers (scheduled quantity).
System Response
This can lead to incorrect activity prices in iterative calculation. In particular, a divergence in iteration might occur. To prevent this from happening, the scheduled quantity is used as the activity quantity. Because this is a serious error, however, the results of activity price calculation are not posted.
Procedure
Check planning for activity type SETM45 in cost center ABP1-4504 and the corresponding activity input for period(s) 1 - 12.
I went into Activity Output/prices to change the mistake over the Plan Act qty , but even when i save and re-run the schedule acitivity still remain the previous figure and does not update into the new one!! Any idea what is wrong ?

Hello Manish,
I am encountering the same issue. Have you found solution on this.
BR,
Zulfikar

Similar Messages

PO with Total Price amount calculated is incorrect at the time of printing.

Hi Experts,
I have one PO with Total Price amount calculated is incorrect at the time of printing.
When my user took the first print out the PO shows the incorrect Total amount.
After 10 mins my user taken the printout again,that time it shows the Toatal Price value is correct amount.
How i can analysis this type of BUG..!!!
I am thinking it might be BUG...???
Please advice with you valuable inputs.
Best Regards,
RK

Hi,
Are you using the standard programm and print form or are you using your own?. Most of the printing issues happens because of own programms. Try with the standard and then you will be able to see why is this happening.
Best Regards,
Arminda Jack

Output price variance calculation

Hello,
I have a question on output price variance calculation in SAP.
The help reads:
"Output price variances are reported in the following situations:
If the standard price has changed between the time point of delivery to stock and the time point when the variances are calculated "
I do not quite understand this as when I have a standard price change between the delivery to stock and the variance calculation, I will already have a CO-PA entry for the price change. So why do I need another CO-PA posting for the variance?
Looking at the simple example of having costs of 150 USD when producing a material of 150 USD. If nothing changes I have a variance of 0 USD.
However if I receive the finished product to stock with a value of 150 USD and then revaluate to 165 USD before the variance calculation happens, I understand SAP would post an output price variance of 15 USD? But I also get 15 USD price variance from the stock revaluation into my books, so isnt that a double count?
Thanks a lot for your help
Kai

Hi Kai Hoffmann ,
As the SAP Help says...
Output price variances are reported in the following situations:
If the standard price has changed between the time point of delivery to stock and the time point when the variances are calculated
With respect to the above point, pls follow the example and let me know if you agree or not...
Let us say, we have Standard Cost of Product X for the month of Feb as $100 per tonne.
One Production Order is created for 100 Tonnes and you made Goods Receipt for 50 tonnes during Febrauray. (50 Tonnes posted to Inventory a @$100). Now, at the month-end, you estimated the Standard Cost once again and the new Standard Cost effective for the month of March is $110 per tonne.
Revaluation of inventory is done for 50 tonnes (for GR posted alread and in stock) and $10 * 50 tonnes is posted to Price Difference Account.
Now, during the month of March, you made the GR for balance 50 Tonnes on the Production Order. Inventory is posted @ $110. Once you do TECO and do the variance calculation, the system will post $10 * 50 tonnes as output price variance, which will flow to COPA and Price Difference Account.
So, I dont feel there is a double count or duplication...
waiting for your comments
Srikanth Munnaluri

The net price is calculated incorrectly for service items in contracts

The net price is calculated incorrectly for service items. Iu2019m creating a contract for services, transaction ME31K (without service master). At the services level Iu2019m adding u201CConditions Supplementsu201D:
-     PRS (gross price) =1000 EUR
-     Z999 (discount) = -100 EUR
-     ZPRS (cost) = 1500 EUR
The gross price is calculated correctly = 2400. My problem is with the net price, with this example the net price is just 1500 this means that is just considering the condition ZPRS.
Where can I customize the net price determination to considerer all price conditions?
Thanks in adavnced

Hi,
In the service industries area, SAP uses two calculation schemata,
MS0001 for contract/master services (Z999 must be added to MS0001) and otherwise, MS0000. Assignment
occurs according to the Customizing settings defined under
'Materials Management -> External Services Management -> Maintain
Conditions for Services -> Conditions: Schema for Services'. If you want
to use another calculation schema for contract/master services, you must
define this with an own entry under Maintain Conditions for Services ->
Variable Calculation Schema for Services', for example, in the form 'K
WK value contract MSxxxx service schema', if a corresponding schema
MSxxxx has been defined first.
If Z999 is a header discount for the service outline level, it must be added to MS0002.
Like the standard discount condition type ZA00 the Z999 must have Cond. class   A for Discount or surcharge in the condition type setting in the customizing, and no access sequence should be assigned to it.
Please read the notes 798798 and 353482.
Regards,
Edit

Iterative calculations

i have a question as i am very new to numbers (excel too for that matter) I imported a model from excel that has circular references until i enable iterative calculations.( to do it in excel: Select ALT T, O and then on the 'Calculation' tab check the box that says enable iterative calculation.) how would i do this in numbers?
Thanks
CF

cfow wrote:
i have a question as i am very new to numbers (excel too for that matter) I imported a model from excel that has circular references until i enable iterative calculations.( to do it in excel: Select ALT T, O and then on the 'Calculation' tab check the box that says enable iterative calculation.) how would i do this in numbers?
For Numbers, a circular reference is an error, no way to change that.
Yvan KOENIG (VALLAURIS, France) vendredi 4 mars 2011 22:15:16

Iterative Calculations in Xcelsius

I'm new to Xcelsius/ Presentation Design. I'm using a plant construction excel model to create front end dashboard. My model has a Interest during construction calculation (IDC) which is iterative. Basicallt the interest charged during the plant construction is also included in the capital. In excel I have formula iterations enable and this works fine, but with Presentation Design, this does not work. Do I need to enable iterative calculations in Xcelsius/ Presentation Design? If so were can I do this.
Any help on this matter is greatly appreciated.
Software:
SAP Crystal Presentation Design V 6.0 Build 14.0.0.760
Microsoft Excel 2010
OS: Windows 7
Thanks,
Arun

Hi,
Thanks for the reply. I'm creating a Financial Model, which has Income statement tab and a capital tab. The Interest for the construction loan is calculated on the capital tab. Say for example if the loan is $1,000,000 and you draw it down by 250,000 per month, interest needs to be charged on the amount withdrawn. This interest during the draw down is then added to the original $1,000,000 loan. This calculation requires a iterative loop, the 1 million will become 1,001,000 for example. In excel I have it set to 100 iterations with .0001 as the maximum change.
In my dashboard, I show a yearly EBITDA chart and the fifth year Free cash flow. The EBITDA, has no interest and shows up fine. The free cash flow (FCF) is after interest payments, and has a zerio value because of the iterative nature.
So simply put, I want to know if xcelsius has an option to enable iterations? If so, where?
Since I do a lot of project financing models, I need this option enable. Hope I explained my problem clearly.
Thanks in advance for any help provided.
-Arun
Hi,
When you say 'Iterative Calculations' are you talking about a specific type of formula in Excel? If yes, note that not all formulas are supported in Xcelsius. Look up 'Supported Functions' in help.
Otherwise, could this be possible by using simple maths in a formula applied in an iterative way (a sum acting on the previous cell)?
What does your data look like?

Moving average price not calculated properly

Hi,
For a consumable material moving average price(MAP) is getting calculated wrongly.
There are 2 goods receipts taken in Jan'08 and Feb'08 at a unit price of 1250 and 1450 INR.
Then there are around 10 Goods issues for a cost centre, Mvt type 201 taken for next few months.
The MAP value has been calculated properly after the Goods issues.
Again there was a goods recipt in Oct'08 for 1275 INR.
The goods issue done in Nov'08 has created a problem and it has calculated wronlgy i.e. instead of Rs. 800, the system has calculated issue price as Rs.3500.
No value has been changed in MR21. No PO's has been created between these days.
Can anyone help us...??
Regards,
Ramya

Hi Ramya,
You have informed in your thread that "for a consumable material..", If a material is procured for direct consumption, the consumption accounts in Financial Accounting are posted when the goods receipt is entered . The total quantity and value of existing stocks of the material are not affected. There is no Goods Issue.
Now, if you procure the material for stock, then changes in Material Valuation due to goods receipts and invoice receipts are carried out automatically (ofcourse manually also) when the relevant transaction is posted.
The extent to which the stock value changes depends on the sequence in which the goods receipts and invoice receipts are posted. The SAP System allows for both possibilities:
- When goods are received before the invoice, the stipulations in the purchase order are used as the basis for posting.
- When the invoice is received before the goods, the details on the invoice are used as the basis for posting.
So, please look into the Invoices and the relevant GR/IR clearing account details. You may get a clue there.
Regards,
Narayana.

Item Cost as Base Price in calculating gross profit

Hi All,
We're using FIFO as item evaluation method. If "Item Cost" has been set up as the base price origin for gross profit, where does SB1 get the value for the gross profit base price for an invoice?
I know it is not from any price list, and it is not from oitw.avgprice. Is this item cost calculated using FIFO?
Thanks in advance.

Hi,
Your assumption is correct. It is item cost calculated using FIFO.
Thanks,
Gordon

Effective Price being calculated as double of Net Price in PIR

Effective Price in PIR is being calculated as twice of Net Price.
i.e Net Price = 100 (as we enter the price in the condition)
Effective Price = 200 ( I don't understand how this is being calculated)
When I create Purchase Order using the same PIR as reference the price remains as 100. (Then why is Effective Price 200 in PIR?)
I have noticed that this problem is with a particular Pricing schema.
In case i use standard schema, the Effective Price remains 100.
Can anyone tell, where i should look??
Appreciate your help!

Hi,
According to your requirement I have observed that u might have maintained conditions records for the condition types withe combination different fields,I mean to say that u might maintained two or more than 2 condition tables and maintained prices.according to given priority given in condition tables(exclusive indicator),system takes the price.For example if you maintained three condition tables,and exclusive indicator has been selected for the two tables in access sequence.system gives priority from top to bottom like wise.....just try....
Thanks and regards,
Sridhar g

KSII activity prices not calculation (actual)

Hi
During Actual Price calculation KSII following is error message :
All activity prices are manually entered
Message no. KP211
Diagnosis
All activity prices in controlling area HGC, fiscal year 2011, and version 0 were determined and set as manually entered prices.
In actual price calculation, all plan activity prices, meaning those calculated automatically (activity price indicator 1 and 2) and those set manually (activity price indicator 3), are treated as if they have been set manually.
System Response
The SAP System cannot calculate activity prices automatically.
Processing is cancelled.
Procedure
Check your activity type planning. To calculate the activity price automatically, you must set the activity price indicator accordingly.
Regards
Imdad

Hi Imdad
Go to KL02 and set your Actual Price Indicator so that it allows to calculate Actual Price through system
There are 2 such fields - Plan Price Indicator and Actual Price Indicator... I think you have presently chosen MANUAL price indicator
Regards
Ajay M

Enable Excel Iterative Calculation

Hello everybody.
I'm going to try to explain my issue; it could be a little bit long:
In my Xcelsius Dashborad, the user can make a selection on a List Box component. The value selected is the prompt for a QAAWS that retrieves more detailed data.
I refresh a graphic based upon one of the columns retrieved. And here comes my trouble: the value could be blank.
In this case, I want my graphic remains unchanged.
For doing this, I'm trying to create a formula that copies the value when it changes but left it unchanged (the prior value) when it becomes blank. My first try results in a circular reference
In B1 cell --> =IF(AND(B1<>A1;A1<>"");A1;B1)
I've found that there is a way to allow Excel to deal with that. (see this link: http://office.microsoft.com/en-us/excel/HP100662431033.aspx).
But if I allow circular references in a separete Excel template and then import it into Xcelsius, it seems that goes crazy, and becomes with an unpredictable behavior, and almost always Xcelius brakes after a while.
So, what I want to achieve is that when a A cell changes, copy its value to another B cell, and when A becomes blank, do nothing (left the previos value in B).
I hope I've made understood the problem and anybody can help.
Thanks in advance.

Same problem here. After importing an Excel model with iterative calulation enabled Xcelsius notifies of a circular reference. The app does not seem to allow the user to enable this option again (under Excel Options>Formulas>Calculation Options).
So can Xcelsius handle iterative calulation at this stage?

Difference Between last purchase price and calculated price

Hi,
I am new to SAP B1. I was wondering what the difference is between last purchase price and last calculated price ??
Thanks
Gary

Hi Gary...........
Welcome To SAP Business One Forum..........
Last Purchase Price is the price of Most Latest Purchase of that particular Price......
And Last Evaluated means Last Calculated Price is the
You can also perform the valuation based on the last evaluated prices. In this case, SAP Business One uses the last calculated costs for each item. If you run a valuation under the FIFO method, for example, and then run a valuation for the last calculated costs, SAP Business One valuates the items using the last value that was determined for an item under the FIFO method.
Regards,
Rahul

Price for calculating the Cost of freight

Hello experts, would like to help, to calculate the cost of shipping by VI01 the system chooses a particular table price registered in TK11 based on the date of creation of the transport document. Is it possible to get the date of organization of transport? You know where to configure this item?
Tks,
Tatiane

I don't think the creation date is used to determine the price condition record - the pricing date should be used for that purpose.
Other thing is that the pricing date may equal the creation date.
Please check the setting of your shipment cost document item category in:
SPRO > LE > Transportation > Shipment Cost > Shipment Cost Document > Shipment Cost Types and Item Categories
Here choose "Define Item Categories" and check field "Pricing Date" of suitable item category (V_TVFT-DATPR).
Regards,
Csaba
(you can give the pricing date manually on selection screen in VI01)
Edited by: Csaba Szommer on Mar 3, 2010 9:43 AM

How to create instant quote tool for website? Customer enters height and width and price is calculated.

I am trying to create a instant quote tool for my site.. so customer type in there height and width and a price appears but I have no clue where to start.. is there any tutorial or would someone kindly give me some advice on how to do this on dreamweaver. I havent used Dreamweaver in years and I cant even remember anything now
Kind Regards

Well this is what I have soo far.. so I want to enter the height /width then if they want to add extras such as fixing options and cut out it will add to the product price ????
<!doctype html>
<html>
<head>
<div class="summary entry-summary">
        <h1 itemprop="name" class="product_title entry-title">Ral 1000</h1><div itemprop="offers" itemscope itemtype="http://schema.org/Offer">
    <meta itemprop="price" content="160" />
    <meta itemprop="priceCurrency" content="GBP" />
    <link itemprop="availability" href="http://schema.org/InStock" />
</div><div itemprop="description">
    <script src="https://apis.google.com/js/plusone.js" type="text/javascript">
</script>
<script type="text/javascript">gapi.plusone.go();</script>
<p>6mm, low iron, toughened glass, PAR
</div>
<div class="shortcode-google-plusone"><div class="g-plusone" data-size="standard" data-annotation="none"></div></div>
</p>
</div>
<form class="cart" method="post" enctype='multipart/form-data'>
        <table id="price_calculator" class="simple_price_calculator">
        <tr>
        <td style="text-align:right;">
          </td>
<script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script>
$(document).ready(function() {
$('#width').keyup(function() {
var height = $('#height').val();
var width = $('#width').val();
var price = (height * width / 1000000 * 325).toFixed(2);;
$('.price').html('Product price: £' + price);
</script>
</head>
<body>
<p><label for="height">Height (mm)</label>
<input type="text" name="height" id="height">
</p>
<p>
<label for="width">Width (mm)</label>
<input type="text" name="width" id="width">
</p>
<p>
</p>
</body>
</html>
    </tr>
</table>
<div class=" product-addon product-addon-add-fixing-option">
            <h3 class="addon-name">Add Fixing Option </h3>
    <p class="form-row form-row-wide addon-wrap-1738-add-fixing-option">
    <select class="addon addon-select" name="addon-1738-add-fixing-option">
                    <option value="">Select an option...</option>
                    <option data-price="5" value="silicone-adhesive-tube" >Silicone Adhesive Tube (<span class="amount">£0.00</span>)</option>
                    <option data-price="5" value="screws-and-drill-holes" >Screws and Drill Holes (<span class="amount">£6.00</span>)</option>
    </select>
</p>
    <div class="clear"></div>
</div><div class=" product-addon product-addon-add-extra-layer-multi-coloured-fine-glitter">
            <h3 class="addon-name">Add Cut Out and Notches </h3>
    <p class="form-row form-row-wide addon-wrap-1738-add-extra-layer-multi-coloured-fine-glitter">
    <select class="addon addon-select" name="addon-1738-add-extra-layer-multi-coloured-fine-glitter">
                    <option value="">Select an option...</option>
                    <option data-price="8" value="1" >1 (<span class="amount">£25.00</span>)</option>
                    <option data-price="15" value="2" >2 (<span class="amount">£50.00</span>)</option>
                    <option data-price="25" value="3" >3 (<span class="amount">£75.00</span>)</option>
                    <option data-price="25" value="4" > (<span class="amount">£100.00</span>)</option>
    </select>
</p>
</p><p class="price">Product Price: £</p>
    <div class="clear"></div>
</div><div id="product-addons-total" data-type="simple" data-price="160"></div>
        <input type="hidden" name="add-to-cart" value="1738" />
        <button type="submit" class="single_add_to_cart_button button alt">Add to cart</button>
            </form>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
</body>
</html>

Iterative price calculation

Hi All
This is my problem after i run the iterative price calculation.
Diagnosis
The activity quantities planned for cost center ABP1-4504, activity SETM45 are not reconciled for period(s) 1 - 12. The plan activity for activity type SETM45 is less than the plan activity input for this activity type through the receivers (scheduled quantity).
System Response
This can lead to incorrect activity prices in iterative calculation. In particular, a divergence in iteration might occur. To prevent this from happening, the scheduled quantity is used as the activity quantity. Because this is a serious error, however, the results of activity price calculation are not posted.
Procedure
Check planning for activity type SETM45 in cost center ABP1-4504 and the corresponding activity input for period(s) 1 - 12.
I went into Activity Output/prices to change the mistake over the Plan Act qty , but even when i save and re-run the schedule acitivity still remain the previous figure and does not update into the new one!! Any idea what is wrong ?
Regards
Happygal

Hello Manish,
I am encountering the same issue. Have you found solution on this.
BR,
Zulfikar

Price iterative calculation

Similar Messages

Maybe you are looking for