Pricing condition without posting to accounting

Hello,
Currently the system config is:
AR00  (discount)  = 50
EWT (Tax statistical) - 10% = -5  ( needs to be statistical as per SAP)
Total Credit   = 50 ( Pricing didnt take EWT )
Pricing copied into Biling and posted correcty into Accounting
We want to copy EWT value into a dummy cond called Z000
Step 10   AR00    (discount)  == 50
Step  50  EWT (Tax statistical - 10%)  = -5
step 80    Z000 (copy of EWT) = 50 to 50  = 5 ( but we want this to be non statistical and at the same time no accounting key and no accrual key) - so that the value doesnt get copied into accounting
Step 100   Total Credit = 45 (This is correct as per pricing ) and make sense for the Cust Ser Rep.
Can any one help on how to achieve the Z000 condition technique in pricing w/o having account key and accrual key? Is it possible
Does this make sense in FI as the EWT tax condition is already getting posted correctly in acoounting and we didnt want to touch it.
So we are trying to achieve this if possible by having no accounting entry? is it possible
Thanks for the help
Points will be awarded for the help
Regards
SK

Hello Anupam,
Actually the EWT condition is posting the values correctly into accounting.
Know for me to caculate the net value and populate it in the netvallue field I need the condition to be non statistical.
If I make it non statistical, it give me a currency error and I check SAP OSS and they said that EWT condition in SD has to be statistical.
SO know the option left is replicate this value into a condition which doesnt post to accoutning so that the pricing will pick it up and update the net value. But remember no posting to accoutning as my statistical condition is already doing it.
This being said was trying to check if we can have condition without accoutning or accrual key or if we need to have somehting then how can we make sure that they dont post to accoutning.
Thanks
SK

Similar Messages

  • SD Staticall Condition Not Posting Into Accounting

    Dear All,
    Need your help. Urgent...
    My business requirement is to post Staticall condition value in G/L count. For that I did the following config.
    1. V/06: Configured new condition type ZCRL,with Cond. class :Discount or surcharge ,Calculat.type :Percentage and activated for 'Accruals'
    2. Assigned this ZCRL to Pricing procedure with account key and accruls.
    3. Maintian G/L accounts for both account keys and accruls in VK0A.
    However in billing document  I can see ZCRL condition type at Item level with account keys , but not posting in accounting.
    Pricing condition PR00 is posting into account.
    Could some body please help on this.
    Much appreciated your help.
    Thanks a lot.
    Regards,
    Jai

    Hi All,
    Many thanks for your prompt responce.
    In my further invistigation I found this is b'c of  IS-Oil. My client recently upgraded to IS-Oil and SD and IS-Oil table got corrupted.
    In sales order item condition 'New filed get updated i.e Invoice
    Cycle’ , which is coming from IS-oIL table.
    Pls check the below attachment.
    To reslove this issue, need to activate Split invoice cycle at Is-Oil billing document type.
    Much appreciated your help.
    Thanks a lot.
    Regards,
    Jai

  • Capitalize asset without posting to accounts

    Dear all,
    We have a scenario, where we like to capitlaze asset in Tax depreciation area (which is not relevent for Posting to accounts) and in the book depreciation area, we need to expense it out.
    Please provide your valuable inputs to deal this scenario.
    i have tried creating Transaction type limiting to Tax Depreciation area, but finally not able to find a way to capitalize a asset without positing to accounts and capiltalizing only in Tax Derpeciation area.
    Regards,
    Srinivas

    Hi Srinu
    Thats not the right way of doing it...
    Still if you want to achieve that -
    1. Un-tick the "Identical values" button in Dep Area Definition.. You might have currently set up Dep Area 15 to adopt values from Area 01
    2. Create a new tr type (Copy of 100) and restrict it to Tax dep area, as you did
    3. Now, execute T code ABSO with this trans type....
    But, I repeat again, the solution I gave earlier is the std way of doing it...
    Regards
    Ajay M

  • Asset value reduction without posting to accounts

    Hi,
    I am facing one problem. I am having asset worth 100000 now I want to reduce it to 0. The asset value change should be made in asset accounting only and it should not have entry in GL. The value for this asset is zero in GL account. Please suggest how can I post only in Asset.
    Points can be awarded.
    Thanks
    Veena

    Hi Rajib,
    It is possible to let created the posting in FI an created a manual reversing with OASV and ABF1.
    But when you retire later the asset you have to make a correction again with OASV or ABF1 (who knows then!!).
    BUT YOUR SUBLEDGER IS NO LONGER IN LINE WITH YOUR G/l ACCOUNTS.
    I think you use these transaction only with conversion (AS91) and take them then out of the authorization.
    When you start with manual posting then you have differences between AA and FI. Over some years the tax office have a look to your books and then you have to explain the differences.  Then you can spend some weeks to found the differences.

  • Lock Condition for posting

    Hello
    We have a requirement to lock certain conditions in a contract for posting.
    The workaround is to take note of such conditions in a contract and exclude the same while running the RERAPP but this is not feasible in our current scenario as billing team is different from accounting team.
    Number of contracts are also huge (about 40000+). Billing team liaise with tenant and if there are any issues, would like to block the condition for posting. Accounting team will run RERAPP without this knowledge and if the lock option is activated, then this condition will not get posted.
    Similarly we have an additional requirement that retroactive adjustments (follow on cash flow) should be posted separately in RERAPP. Now in this case, flow type is the only differentiating factor because due date of retro adjustment may be same as of regular cash flow item.
    Please advise
    Rakesh

    Dear Rakesh Sharma.
    If you just only want to prevent/restrict certain conditions of contract posting activity
    (RERAPP),you simply consider about this method as below ;
      1) You can define the RE Authorization Object for the restrict activity of certain
          condition in the Accounting team role.
          -   Authorization Object : F_RECD_CN
          -   Activity : 02 (Change)
          -   Condition Type : Except for the certain conditions.
          but this method can not be suitable, when account team try to run RERAPP
          with check the "Do Not Update Conditions" option.
        So, you can consider the easiest way by applying the "Enhancements"
       2) Apply the Enhancements for Periodic Posting.
            - Enhancement Spot : BADI_RE_RA_CA
            - BADI : BADI_RERA_POSTING_PARAM
              (Periodic Posting: Restrict Selection of Cash Flow Records)
            - Method : SUPPRESS_CF_ITEM
            - Example : you can defined your own customer-specific parameters such as
                       "Check the Certain Condition & User role/department for suppressing"
    but how about this..,when you design the lease account management process,
    it seem better to rebuild the contract creation and contract posting process bwtween
    contract management team and account team ahead of the technical processing.
    Regards,
    Jeong, Yeong-Chul

  • Revalulation without posting in GL

    Hi experts,
    we have to post an asset revaluation at the 01.01.2009 without posting the accounting documents in GL at the run of the depreciation, because the document manually posted in GL.
    Please, is there a way to post this operation / transaction / specific transaction type?
    Thanks!
    Bye,
    Gaetano

    Hi Gaetano,
    To acheive the required results, you have to create an new depreciation area for revaluation / Indexation and manage the index series using T code OAV5 and specify that are dos not post to GL in Transaction OADB as 0 (Are does not post).
    Hope the above helps.
    Regards
    Nitin

  • Posting to accounts

    Dear friends
    how to post the billing documents to accounting,which were already reached the customer without posting to accounting
    please help in this matter
    Regards
    murali

    Hi Murali,
    In order to post billing document automatically to accounting.
    go to billing type details -VOFA
    remove the flag posting block if it is there?
    for manual release go to vf02
    billing document- release to accounting.
    karnesh

  • Conditions for Pricing but dont want it to post in accounting (Non stat)

    Hello Gurus,
    Can we have a pricing condition which is non statistical and doesnt hit accounting?
    I dont want this to post to accounting, but just to calculate in the pricing so that I can get my net value.
    Can this be done?/
    Any help is very much appreciated
    THanks
    SK

    Hello Surana,
    We are trying to implement extended with holding taxes for our customers.
    As per SAP this condition has to be statistical. Even though this is statistical it is posting to accoutning as a debit entry coerrectly.
    But in my pricing since this is statistical value, pricing is not taking into consideration. When I print my invoice total net value is picked up from NETWR field.
    So the aim over here is to update my pricing net value without hitting or posting to accounting.
    For this I wanted to make a copy of this existing condition and make the rate as 100% of my EWT condition. But I cant make this statistical as my pricing will not take into account. So need new condition without any accounting or accrual key so that it can be calculated into pricing net value and not in accounting.
    Any suggestions or ideas?
    Thanks
    SK

  • Discount condition cannot be posted in Accounts

    I have created 2 Discount conditions (accrual). These conditions need to be posted to accounts.
    I have already assigned and account key and resp GLs (2 GL's for each in VKOA) to both conditions.
    However, while posting to accounting it shows thats the account key is missing.
    In the pric. procedure the account key is there yet, this is throwing a problem.
    What could be creating this issue.
    Thanks!
    Pinky

    Hi Natasha,
    As per your communcation it is clear that the Condition are Accural conditions that means you will accumlate the Discount and then issue a Credit note for it. For this requirement you have to assign Account Key to the conditions aswell as assing a Account key in the Last coloumn of the Pricing procedure i.e.ACCRLS.
    By assigning the A/c Key to accurals and in the A/c key column system will post the Discount to the respt. G/L and also accure the same for future issuing of Credit note.
    Hope the above helps you.
    REWARD if it helps you!!
    Regards,
    Ajinkya

  • Modification of MIGO Financial Posting from Custom Pricing Conditions on PO

    Hello All,
    I am currently at a client where there are 7 custom Pricing Conditions associated with Sub-Contracting POs. Because there is a Global Template in place, there is no way to include these custom Pricing Conditions in the typical Purchaing Automatic Account Determination.
    We are considering a custom development whereby we would associate each custom Pricing Condition to a unique Expense GL Account, but have it all lumped to the same GR/IR LIability Account.
    My big question is....does anyone know where/how we can hook up a User Exit, BAdI, BAPI, or some other method  to affect the GL Posting based on a look up table, upon the posting of a MIGO transaction?
    Any assistance with this would be greatly appreciated.
    Thank,
    Marc

    hi,
    in the condiion type remove the Quantity scale basis and try
    Thanks

  • How can I get SD pricing conditions list as in VA01 without creating SO?

    Hi Guys,
    I have searched a lot of posts for this answer but only found that it's not possible to do through function 'PRICING' without creating SO document.
    My initial input is: sales organization, distribution channel, customer, material number, pricing date. Can I find relevant pricing conditions based on this info? I need to make a report, which would display all pricing conditions with values based on the selection parameters mentioned earlier. Thanks for any help.

    Use function module 'PRICING'
    This is a pretty big task interms of collecting all the required data.
    Check where used list for pricing. This is used in 2 places. Put a break point on them and run your sales order transaction. See what are the fields passing through.
    You can also determine from KOMK and KOMP . One for customer and the other for material. Make sure you pass all the data that is required.
    You will get results of conditions in importing table. (may be konv)
    Using simulate will actually creates a document number (i believe). Even though this will not be available in VBAK, VBAP... the number will be taken off from the sales order number range.
    I have used PRICING function module in of my work.

  • Sub totalin pricing procedure post in accounting

    Hi Friends,
    I want to post the subtotal in pricing procedure into account?
    Is there any method to post directly subtotal in to accont. Or we can assign the subtotal value to any condition , or assign a account key to this condition for account posting?
    Thanks in Advance
    Suchender Dagar

    I believe you are talking about Subtotals (A,B,C...) added in the Pricing procedure.
    These Subtotals are stoed in Pricing Communicaiton structures komp.What you would have to do is create a new condition type with a Alternative Calculation Type Routine to pick up value from KOMP relavant Subtotal instead of the general logic. Pass this to account with a Account key and othere combinations.
    You can talking about generic Subtotals (with out Steps) in the pricing procedure to group and add all previous steps eg, Subtotal - Price Before Tax, then just create a condition type  and add a new step with copy of previous Sub Total. Pass this to account with a Account key and othere combinations.
    Hope this helps. If Yes please credit marks.
    Regards,
    Jose

  • Pricing condition,automatic display without doing VK11 firstly, how ?

    Hi all, another question.
    I have a pricing condition in my sale order. and its value is determined by Pricing Conditions Routines with Conditions Value.
    How can it automatic display in the condition of my sale order, without doing VK11 firstly.
    My english is poor, so I hope u can understand these.

    Hi
    As I said in my previous thread , go to VOFM->Pricing, and check in the requirements if any standard requirements are meeting your requirement or not .If it is not meeting then create a new requirement with the help of  technical consultant.  and assign the requirement  in the Pricing  procedure requirement feild for the condition type and then check wheather it is capturing the price or not in the sales order and billing documents.
    Regards
    Srinath

  • List of GL accounts without posting

    Hi Guru,
    Appreciate if you could help me.  i need to get all the list of GL Accounts without postings but how?
    Appreciate the response
    thanks in Advance

    Account balances could be ZERO, but that does not mean that there are no transactions for that accounts,
    there could be a debit and credit, but still the could be zero.
    The question requires the assets without posting throughout the life.
    Whereas F.01 only looks for two particular years.
    The best way I can assume is BSEG (if you have millions of records) - then check the cost benefit analysis of finding accounts without posting. If you get one or two accounts at the end of analysis, what you are going to achieve, it is simply just blocking them. But consider the amount of stress system would take.
    If you have few throusand of BSEG records then import to excel. - Put Pivotal Table on Column GL Account.
    Then take a file from F.10
    Then have VLOOKUP to find which accounts are not used.

  • Blocking the posting to an account that is creted without an alt. account

    if an account is created without any alternative account, any posting should be blocked by the system (currently it is possible to post on accounts having no alternative account) . Please suggest the needful

    HI,
    I once had a customer who checked the alternative account number (for a set of comp. codes where an alternative acount number is mandatory) when the account master data was created/changed (guess it was a modification).
    So the process was 1: create the alternative account number 2. create the acount number in the comp. code and assign the alternative account number before saving the changes.
    The advantage is that there cannot be a posting to account numbers without alternative account assigned in account master data, so people doing the posting stuff (often different from the ones responsible for account master data) are not blocked when a validation message (like discussed above) appears.
    Best regards, Christian

Maybe you are looking for