Pricing error in free goods position

Hi all,
I have a strange error when save a sales order with position about free material.
During the creation I can see the pricing scheme correct, with all the condition (price, subtotal, rebates of 100%, ecc.), but after I save the order, when I display again the sales order, the pricing scheme for the free goods position not cointains any condition (no price, no discount, ecc.) but only the subtotals.
I don't understand what the system doing during saving document.
The free goods position have a custom category type of position; for this, in the pricing scheme I apply a discount of 100% to make free the position.
The user tell me about this problem only when he try to bill the order, because when he creates the shipping, he didn't have any problem.
Can someone help me?
Thanks in advance
Alessandra

Hi Allessandra,
When the free goods are determined and priced properly while creating the document, there should not be any problem with the configuration settings. The problem is that something inintended is happening when the document is saved. Please ask your ABAPer to debug that and I guess some changes might have taken place in the program SAPMV45A (MV45AFZZ)and check for the coding in the Userexits
USEREXIT_SAVE_DOCUMENT and USEREXIT_SAVE_DOCUMENT_PREPARE.
Pleae try this way and you may get the solution.
Thanks
Ravi

Similar Messages

Pricing procedure of free goods

Could anyone please tell me the effect of pricing procedure in free godds?And what is the difference between pricing procedure in free goods(IMG->Sales and Distribution->Basic Funcions->Free Goods) and pricing procedure in pricing(IMG->Sales and Distribution->Basic Funcions->Pricing)

Hi Wei Zhang,
When there are more than 2 materials say material A which is of some price, and material B which is Free of cost, then the item category will be different for those. TAN for Mat A and TANN for materail B.
Pricing is depends upon the customer pricing procedure and document pricing procedure along with the Sales Area.
When there are free Goods, Again yu have two conditions
1. Give 100 % discount on free goods.
2. Or charge 0 value for that.
This pricing procedure you can do in free goods priocing procedure.
Hope this will help.
Thanks,
Raja

Pricing determination for free goods

Hi Experts,
Please help me for the following issue:
This is with regarding pricing determination. I have a requirement that, for each 10 quantities of Material ABC sold out, 3 quantities of same material ABC is given free. In VBN1, I have set the requirements as such.
Material ABC has Basic discount of 20%, Excise duties and VAT.
While entering 10 quantities in 1st line item of Sale order, automatically 2nd line item generates with 3 quantities of the Same material. Item category for 2nd line items is TANN:
ORNORM_______+ TAN = TANN.
In VOV7, have defined Pricing as "B =Pricing for free goods(100% discount)" for TANN. The issue here is,
For the 2nd line item (Free goods), negative values and Tax values are getting updated because system calculates BED, VAT, 20% discount for both line items in the sale order.
When I changed the Pricing as Blank (No Pricing) in TANN item category. 2nd line item also (i.e free goods) behaves like 1st line item (Chargeable). I want the system to calculate VAT, BED, 20% discount only for the chargeable item not for free goods.
Please suggest.
Thanks in advance.

Hi Experts,
Thank you for your valuable time.
R100 condition type is already being used before taxes and discount.
System calculation as below:
1st line item (Chargeable): For 10 quantities
DNP -
5000
Discount 4% -
200 (Negative)
BED 10.3% -
468.6
Vat 13.5%----
648
Total----{4800 + 468 (BED) + 648 (Vat)}
2nd Line item (Free goods): For 3 Quantities
DNP----
1500
R100 Discount----1500 (Negative) = Value is getting zero here itself {DNP - R100 (1500 - 1500)}
Discount 4%----
60 (Negative)
BED 10.3%----
140
Vat 13.5%----
194.4
Total----{60(Negative) + 140(BED) + 194.4 (Vat)}
For the 2nd line item, negative 60 value, BED and Vat values are being calculated.
Hope that I have specified my requirement clearly, can you please let me know what should be done, if there should be no 4% discount, BED and Vat values for 2nd line item (Free goods).
Thank you,
Vijay N

Pricing date and free goods

Hello Folks,
My understanding is Free goods is determined basically based on quantity as in quantity ordered.
The system re-reads free goods condition record in the sales order when quantities of the main item changes or when Pricing Date changes.
Based on the above, I need to clarify :
1. If free goods is based on quantity, how does a change in the pricing date affect the determination? I assume the by pricing date change, it is referring to the pricing date setting in a free goods condition record.
So, I am not sure why pricing date change requires a re-determination of the condition record for free goods.
Or is it because free goods is determined based on $ amount of goods ordered?
Moreover, its said that when Pricing is Re-Run, free goods determination is un-affected.
Cheers.
John

Hi,
Free goods can be of two types. Inclusive and Exclusive.
Inclusive discount are always value discount. What I mean is, if you buy 10 qty of an item, say 2 qty is free, then, it means, 20% off on the original price. i.e. only 8 are billed and 2 are discounted from pricing.
In exclusive free goods, you are shipping 10 qty of an item + 2 qty of the same item in addition to 10. So, 10 are billed.
When the pricing date in the sales order is changed, how will the system know whether the item being priced on a particular day should allow the free goods or not. So, free goods determination becomes necessary. Hence, it goes thro' free goods determination when you change the pricing date on the sales order.
Hope this helps.
Regards,
Mukund S

Error in Free goods

Hello Guys,
I am held up with an Error "This selection is not possible in the inclusive bonus quantity field" while saving after having selected Exclusive Free Goods.
Has any had this Error b4 and resolved??? Please help me..
Best regards,
Lata.

hi
you will get that message when you have selected "inclusive free goods " and then maintaining (2 in free goods category)
instead of 2 enter 1
or else if un want to give exclusive free goods then select exclusive from the menu and then maintain 2 exclusive in free goods category
regards
prashanth goud

Free goods pricing procedure

Hi,
I need to configure the free gods functionality and I look for clarification from those who have configured it . My questions are.
1) how does the system determines while creating sales order that free goods are involved.
2) for main item, if the item category is TAN, then for exclusive free goods the item category will be TANN ? Is the following combination ok for free goods item category detemination ?
OR + NORM+TAN(higher level) +FREE(usage)=TANN......where TAN is the item cateogry of main item
3) How is the free goods pricing procedure works. ?? I mean do we have to define the basic price condition PR00 in the free goods pricing procedure so that the system applies the basic price to the main item ? for example if the main billable qty is 10, and per unit price is 100, then the basic price will be 10*100=1000 for the main billable items in the free goods pricing procedure.
now if free goods are 2 (exclusive), then the system shows in the pricing line item a basic price of 2100=200 and then a condition R100 is shown as a negative amount of 2100= -200 so that net value is zero ??
4) I think when the material is entered, then the system reads the free goods master record and then determines the main item category for billable item and then free item category is determined and then pricing is carried out
pls validate my above points ?
regds

Hi
Yes, there will be only one pricing procedure for free goods and normal goods.
Free goods procedure is to determine the free goods condition records (maintained through VBN1) and now way related to pricing.
Pricing procedure is to determine the price for each line item based on the conditon records (maintained through VK11).
As an example- there is free goods conditon record for a material as 10 + 2 exclusive and hence for an order quantity of 10 you can see a second line item for a quantity of 2 as a sub item with item category as TANN.
The pricing happens the same way for both the line items and you can check that in the conditions tab of each line item.
While carrying out the pricing, system goes to the first conditon type in the pricing procedure and if it satisfies the requirement then accesses the conditon records and picks if there is any valid conditon record. Like wise, it checks all the condition types in the pricing procedure. In this process it also checks the conditon type R100 and the requirement will not be satisfied for the first line item and hence will not determine any value. In the case of the sub item with TANN item category, the condition records will be determined as happened for the first line item and also the R100 will be determined. Because, the reqirement for R100 says, the pricing details(in VOV7) for the corresponding item category(which is TANN) should be B-Pricing for free goods(100% discount). TANN satisfies this conditon and it determines the total amount here, making the net value as zero. If there are any values below the R100 condition type in the pricing procedure, then the net value will not be zero. Hence positioning of the R100 condition type has importance in designing the pricing procedure. If you change the value for TANN in VOV7 from B to X, then R100 will not be determined even though the free goods are determined in the sales order as sub items. The pricing happens the same way to both main item and sub item (free goods).
Regards,
Ravi

FD - Free of Charge Delivery and Pricing Error

Hello Gurus,
I want to make a Free of Charge Delivery.
In VA01 I chose FD.
Prior to doing that I have checked the following:
- Item Category = KLN
- Schedule Line Category = CP
In KLN, Pricing tab is left blank
So why when I want to create a Free of Charge Delivery I get the following message of error:
"No pricing procedure could be determined"
Why does the system react like this when no pricing procedure for this item category has been triggered or checked?
Regards
Chris

Hi there,
Many thanks, I have done all this however it still doesn't work.
This is what I think I have to do:
I am using the standard SAP pricing condition RVAA01 where the main condition type is PR00 + document pricing procedure set to "A" which is Stantard.
Now, I understand how the PP works with regards to its domain of activity (Sales Area + documents types etc...)
But I want to be able for the same Sold to Party 100277 to order normally using this pricing procedure + condition type PR00 as well as getting Free Goods.
1- Does it mean that I can still keep the same pricing procedure and add a condition type such as R100 or NRAB in VK11?
2- Given this pricing procedure is set to be "A" = Standard does it mean that whatever Free Goods condition type I may enter such as R100 or NRAB, the system is not going to accept them?
3- Shall I need to re-create a whole pricing procedure for Free Good set to "C" for free? In that case what happens when I want to create a normal sales order in VA01 using OR? Which procedure is SAP going to select? A or C
Regards
Chris

Getting error in return order as free goods are not copying

Hi
We are facing error as free goods are not copying in return orders,We have done upto the billing and creating return order with the reference of billing
Many Thanks
Rakesh Naveen

Hi,
Kindly check the copying control at IMG->Sales and Distribution->Basic Functions->Free Goods->Maintain Copying Control.
Thank You,
RB

Free Goods - Not showing in sales order as subsequent item

Dear Gurus,
I have created a Free Goods procedure determination and maintained it at Customer/ Material level in VBN01.
The procedure is inclusive as follow:
For every 100 units purchased, the customer gets 10 units free
However at sales order level there is no indication at all that the Free Goods are being triggered.
When I check the pricing procedure, the condition record NA00 that I have used doesn't show-up.
There is no subsequent item in the sales order under the main item showing the Free-Goods discount.
Could you please help me go through the customizing process to correct the error?
Many thanks for your help
Chris

Hi,
FYI
Free goods can be configured in SAP by following two methods.
(1) Manually
(2) Automatically
Manually: By specifying higher level item category for a line item we can determine free goods as a free of charge
items during sales order processing.
Automatically: System proposes free of goods automatically in the sales order. In automatic free goods
configuration system follows two methods.
(1) Exclusive
(2) Inclusive
Exclusive: System configures free goods in exclusive option like free goods quantity is going to be excluded in
order quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 10 + 1.
Inclusive: System configures free goods in inclusive option like free goods quantity is going to be included in order
quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 9 + 1.
NOTE: In exclusive method other items also can be given as a free of charge items for order item.
Configuration steps: INCLUSIVE
SAP follows condition technique to configure free goods automatically.
Maintain pricing procedure
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Maintain pricing procedures
Choose free goods procedure NA0001 and select it
Click on copy icon on application tool bar and rename it Ex: SRI001
Condition type is NA00 and Access sequence also NA00
Save it and Exit
Activate free goods determination
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Activate free goods determination
Go to new entries
Specify our sales area, document pricing procedure, customer pricing procedure and specify our free goods
procedure Ex: SRI001
Save and Exit
Control free goods pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Control pricing for free goods item category
Choose item category TAN from position button
Specify the pricing as X = Pricing standard
Choose item category TANN from position button
Specify pricing as B = Pricing for free goods (100% discount)
Save and Exit
Maintain condition type for 100% discount
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain condition type for 100% discount
Check whether condition type R100 is available or not (R100 = is 100% discount)
Exit
Maintain pricing procedure for pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain pricing procedure for pricing
Choose our pricing procedure form position button and select it
Click on control data icon under dialog structure
Include condition type R100 between the steps of discounts.
Specify requirement = 55 and Routine No: 28 (100% discount) in Alt. CBV.
Save and Exit
Requirement 55: The Routine No. 55 is assigned to condition type R100. If the user wants to look both revenues
and sales deductions for the free items since the product that we are going to give as a free of charge item can be
sold separately in the same sales order. Then the item category of free goods TANN has the pricing value as B.
Then the system calculates value of the free goods as 100% discount as we discussed above the same material [that
is going to be given as a free of charge item]. Some times the same item is going to be given as a normal item.
Then system calculates price for normal item and system should not calculate price for same item [free of charge
item]. So as to perform this calculation we have to assign Requirement/Routine 55 is to assign condition type
R100.
Alt CBV = 28: [100% Discount] Condition type R100 should be taken as a ZERO value. The formula 28
calculates condition type R100 value as a ZERO.
Set Transfer of cost to Main item: [Copy control]: Transaction code: VTFL
Copy control is a concept by which the system copies the data from source document to target document.
Path:
IMG
Sales and Distribution
Basic functions
Pricing
Free goods
Control free goods pricing
Set transfer of cost to main item [copy control]
Choose Billing type F2 Delivery document type LF from position button
Select it and click on itemicon under dialog structure
Choose item category Ex: TAN
Click on details icon
Click on display or change icon
Choose item category as TAN again
Select it and click on details icon
Check cumulative cost
Save and Exit
Cumulative cost controls whether the cost value (VPRS) is to be copied from relevant sub items into main items.
Sub items cost are not relevant for billing.
Maintain copying control: Transaction code: VTAA
Path:
IMG
Sales and Distribution
Basic functions
Free goods
Control free goods pricing
Maintain copying control
We maintain copy control at item level category for free goods. In this field we can control whether the
free goods should also be transferred when we copy from one document to another document.
Choose source document type as QT and target document type as OR from position button
Select it and click on item control button under dialog structure
Choose AGN item category from position button
Click on display or change button
Again click on AGN
Click on details icon
Check Re u2013 explode structure/Free goods
Save and Exit
This indicator controls whether the free goods are copied from source document to target document or redetermined
again.
Maintain condition records for Free goods [INCLUSIVE]: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions
Free goods
VBN1 u2013 Create
Specify condition type NA00
Click on key combination
Specify all the data
Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the Material No., Minimum order quantity (Ex: 10), Specify [from] the free goods quantity (Ex:
10), Unit of measure u201CEAu201D (Each), Free goods (are free goods) as u201C1u201D.
Calculation procedure: We can specify the Routines for calculation procedure as 1 or 2 or 3
1 = Pro u2013 Rata (Proportionate): Ex: If the customer places order for 100 cases of material u201CXu201D, then customer
receives 20 cases of same material as free. That means, the business can say that buy 100 and get 20. If the
customer orders for 162 cases, then system automatically grants 32 cases as a free of cost (162x20/100 = 32 Cases).
2 = Unit of reference: When customer orders for 100 cases of material u201CXu201D, then the customer receives an
additional 20 cases as a free of goods. That means business can say that buy 100 get 20 free by granting 200 free
for every full of 100 cases. The customer places order for 162, then system automatically grants only 20 cases
(100x20/100=20).
3 = Whole unit: When a customer places order for 100 cases of material u201CXu201D, then the customer receives additional
20 cases of material u201CXu201D as a free of goods item. The business can say that buy 100 and get 20 free of charge items.
If the customer orders for increment of 100 that means 200 (100 + 100) items, then he gets 40. If he placed the
order for 101 u2013 199 items he gets only ZERO.
Save and Exit
Condition record for EXCLUSIVE: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions free goods
Specify the discount type u201CNA00u201D
Click on key combination
Click on Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the sales organization, distribution channel
Specify customer number and validity periods, material, minimum quantity, order quantity, unit of
measure, calculation procedure, free goods (3)
Specify additional material free goods (if other goods is going to be given as a free of charge item.
Save and Exit
Go to VA01 and raise the sales order for INCLUSIVE and EXCLUSIVE.
See the Free Goods effect.
Condition type NRAB = Free goods: Requirement = 59, Alt CBV = 29: [only for INCLUSIVE purpose]
Requirement 59: We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases
of product u201CXu201D, then he receives 10 cases of the product free. If the user would not like the additional line item in
the sales order for free goods rather than the discount of the 10 cases is represent in the same line item as other 90
cases. If the free goods discount should not apply on credit for returns that do not make reference in the previous
document.
Alt CBV 29: The condition type NRAB is to be assigned with 29 formula to support inclusive free goods
agreement where the user would have to apply the discount to the order item rather than having a sub item
generated for the free quantity.
Ex: The customer orders for 100 cases of product u201CXu201D, 10 cases are free instead of having a free sub item generated
b the system to represent the free 10 cases, the user would like to have a discount applied to the 100 cases line item
equal to the value of the 10 cases.
NOTE: Free goods can only be configured on document category type u201CCu201D (OR). That means we cannot configure
free goods on Inquiry and Quotation.
Header Conditions
SAP has delivered two kinds of condition types: (1) Header conditions
(2) Item conditions
Header conditions: The value of the header condition applies to the whole items in the sales document.
Header conditions do not have any access sequence.
So that, value of the header conditions should be maintained manually.
Ex: HA00, HB00
Configuration settings:
Include condition types HA00, HB00 in V/08 in between the discount condition types.
Go to VA01 and raise the sales order
Select line item and go to Go to button
Header Conditions
Include condition type HA00 HB00 with values [HA00 is percentage discount and HB00 is absolute
discount]
If HA00 = 1%, then system applies 1% on base value on all items in the sales order.
If HB00 = 100/- Rupees, then system applies 100/- Rupees proportionately to all items in the sales order. If sales
order has two items, then system applies 50/- Rupees to each item.
Click on activate button
Go to item condition screen
Check how system applied header conditions for line items
NOTE: Make sure that sales order contains more than one item.
Condition Scales
We can maintain scales for each and every condition type. So that we can determine pricing conditions values
depending upon the range of the order quantity.
Ex: If you maintain condition record for PR00 for material one as a 100/- Rs. For 1 material, then we can maintain
scales for this material like below:
From Quantity Price
1 u2013 10 1000
11 u2013 20 999
21 u2013 30 998
31 u2013 40 997
Configuration settings:
Go to VK11
Maintain condition record for PR00
Select line item and click on scales icon on the application tool bar
Maintain scales and scale rates accordingly
Save and Exit
Go to VA01 and raise the sales order
Enter the order quantity according to the scale and see the scale effect
Regards,
Siva

Message no. V1475 while doing free goods return process

Hi Experts,
I am facing problem while creating Free Goods Return Order.
In return process, I want to create a return order with free goods quantity,it is not coming in the line item.
For Eg:
I created 1 Sales Order. Exclusive Order Qty. 10 + 1(free goods Qty.) -> PGI -> Billing done. Now while creating Return Order (RE) in VA01, system is giving error "Item category for item 000020 cannot be determined" and system not showing free goods quantity in the line Item.
I have done below configuration:
1 - Number Range of free Goods
2 - Maintain Condition Table For Free Goods
3 - Maintain Access Sequence For Free Goods
4 - Condition Type For Free Goods
5 - Pricing Procedures for free Goods
6 - Active Free Good Determination
7 - Determination of Item Category for free good Item and for return purpose i have done
Sales Doc.Type - RE + Item Usage- Blank + Item category -REN + Higher level of Item category- RENN
Pls guide me
Thanks & Regards,
Jyoti Shukla

Hi,
I resolved this free goods return order Issues
I have done below configuration:
1- Do Item category assignment for free goods return process in tcode VA01
Sales Doc type –RE+ Item Category Grp- NORM + Item Usage- FREE + Higher level Item category –REN+ Item category –RENN
2- Do Copy Control for return free goods purpose in tcode VTAF
Header : RE(Tgt)+F2(Source)
Item : REN+RENN(Copy requirements-303+Data T-153+Data T-104+Data T-004)
Schedule : Blank
3 - Now create return order with reference of billing doc., take order type RE so now will show free goods quantity in the line item.
Thanks & Regards,
Jyoti Shukla

Inclusive Free Goods Determination ?

Hi,
   Can someone dend me the config. steps for inclusive free goods determination .
Regrds,
Binayak

dear B B
please gothough this
FREE GOODS:
     It can be configure in SAP by following two methods
A)     Manually          B)     Automatically
A) Manually:
By specifying higher level item category for a line item, we can determine free goods as a free of charge items during sale order processing.
B) Automatically:
System proposes free of goods items automatically in the sale order. In automatic free goods configuration system follows two methods
     a) Exclusive          b) Inclusive
Exclusive:
System configures free goods in exclusive option by free goods quantity is going to be excluded in order quantity ex: 10 items, line item is free, then system configures free goods as a ten plus one.
Inclusive:
System configures free goods in inclusive option by free goods quantity is going to be included in order quantity ex: for 10 items, one item is free, and then system configures free goods as Nine plus one
Note: In exclusive method, other items can be given as a free of charge items for order item
Configuration steps:
Inclusive:
SAP follows condition techniques to configure free goods automatically
Maintain pricing procedure:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  maintain pricing procedure
Choose standard pricing procedure NA0001-   free goods (SD) and click on copy as button and re-name it.
Condition type NA00; access sequence -- NA00
Step 2:     Activate free goods determination:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  Activate free goods determination
Go to new entries and specify our sales area, specify document PP- as A, customer PP as one and assign free goods procedure ex: NA0001.
Step 3:     control free goods pricing:
Control pricing for free goods item category
Choose item category TAN and specify the pricing as a X (pricing standard)
Choose item category TANN and specify the pricing as B (100% discount)
Step 4: Maintain condition type for 100 % discount:
     Choose condition type R100 (100% discount)
Step 5: Maintain pricing procedure for pricing:
Choose our PP from position button , select it and click on control data icon and include condition type R100 between steps of discounts & specify requirement = 5 and specify item no: 28 as a 100% discount in alternative formula for condition base value (AltcBV)
The requirement = 55 can be assign to condition type R100. If the user wants to look both
Revenues and sales deductions for the free item since the product that we are going to give as a free of charge item can be sold separately in same sales order the item category of free goods (TANN) has the pricing value as a B then the system calculate value of free goods as 100 % discounts . As we discussed above the same material (that is going to be given as a free of charge item). Some times the same item is going to be given as a normal item, then system calculate price for normal item, system item ( free of charge item ) so here to perform this calculation we have to assign requirement = 55 for condition type R100
Alternative Condition Base Value   = (100% discount)
Condition type R100 should be taken as 0 value the formula 28 calculate condition type R100 values as a 0
Set Transfer of cost to maintain (copy and control)
IMG  SD  Basic functions  Free goods  Control free goods pricing  Set transfer of cost to maintain (copy control)
Copy control is a concept by which the system copies the data from source document to target document.
Choose billing type as F2 and delivery document type LF,
Select it & click on item icon & choose item category TAN, click on details icon and
Click on display-change icon and choose item category TAN again select it & click on details icon and check cumulate cost.
Cumulate cost controls whether the cost value (VPRS) is to be copied from relevant for sub-item into main items sub-item cost are not relevant for billing. Save & exit
Maintain copying control:
IMG  SD  Basic functions  Free goods Control free goods pricing  Maintain copy control
We maintain copying control at item level category for free goods. In this field, we can control whether the free goods should also be transferred when we copy from one document to another document.
Choose source document type as   a QT & target document type as a OR &
Select it & click on item control button under dialogue structure
Choose AGN item category from position button & click on display or change button, again click on AGN & click on details icon and
Checks re-explode structure/ free goods (this indicator controls whether the free goods are coped from source document to target documents or determined again.)
Save and exit.
Maintain condition records for free goods:
Logistics  SD  Master data  Conditions  Free goodsVBN1 (create)
--Specify condition type NA00 & specify sales org. distribution channel, customer number, valid     periods and
--Chose option as inclusive.
--Specify the material number and
--Specify the minimum order quantity,
--Specify the quantity from which the free goods should be applied
--Specify the unit of measure and
--Specify free goods (are free goods) as a one.
Calculation procedure:
We can specify the routines for calculation procedure as a A-   (1- pro- rata- proportionate)
A) Pro-rata:
Ex: if the customer places order for 100 cases of material A, that customer receives 20 cases of same material is free. That is the business can say that buy 100 and get 20.
If customer orders for 162 cases, then the system automatically calculate 32 cases as a free of cost. 162 *20/100 = 32.
B- Unit of reference:
When customer order for 100 cases of material A , then the customer receives additional 20 cases of A as a free of goods items that is the business can sign that buy 100 and get 20 free, by inventing 20 free for every full of 100 cases.
If the customer places order for 162, then system automatically grants only 20 cases.
Formula:     100*20/100 = 20
C- Whole Units:
When customer places order for 100 cases of material of A, then customer receives additional 20 cases of material A that is business can say that buy 100 and get 20 free of charge items.
If customer order for increment of 100 that is ex: for 152 items, he get only 20 . If place the order 200 items, the he gets 40 that inclusive.
Condition records for exclusive:
--Specify the discount type NA001 &
--Click on exclusive option and
--specify the sales organization, distribution channel, customer number, validity periods and materials, minimum quantity, order quantity, unit of measure, and calculation procedure, free goods and
--Specify additional material free goods (if other goods are going to be given as free of charge item) save it and exit.
--Go to VA01 and raise the sales order for inclusive and exclusive and see the free goods effects
Condition Type: NRAB free goods; requiremet-55; AltCBV-29(only for inclusive)
When the customer doesnt want physically fee goods and the free goods price should be deducted from total price ten we can use condition type NRAB, which hides free goods line item in the sales document
Settings:
Pricing for inclusive free goods w/o item generation
--Choose our pricing procedure
-- Include condition type NRAB with requirement 59 and alternative formula for condition base value- 29 between discount condition steps.
--Go to VBN1, maintain condition record for free goods with Inclusive method and make sure that free goods category should be 3( inclusive rebate w/o item generation)
--save it
--Go to VA01, raise the sales order and check NRAB condition type effect.
Requirement 59:
We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases of product A then we receives 10 cases of product free.
If the user would not like the additional like items in the sales order for free goods rather than he discount of 10 cases be represented in the same line item as the other 90 cases. If the free goods discount should not applied as credit for return that doesnt make reference previous discounts.
Alt formula for condition base value-29:
The condition type NRAB is to be assigned with 29 formulas to support inclusive free goods agreements where the user would have to apply the discount to the order item rather than having a sub-item generated for the free quality. Ex: the customer having a free sub-item generated by the system to represent the 10 free cases. The user could like to have a discount applied to the 100 cases like item equal to the value of the 10 cases.
Note: Free goods can only be configuring on only document type C that means. We cant configure free goods inquiries in quotations.
rewards pls
siva

Free good in promotion

what is the process to give the free goods one product with other product.
Ex.pen with notebook
amit

Transaction *VBN1* for free goods condition record.
Free Goods determination:
FREE GOODS:
It can be configure in SAP by following two methods
A) Manually B) Automatically
A) Manually:
By specifying higher level item category for a line item, we can determine free goods as a free of charge items during sale order processing.
B) Automatically:
System proposes free of goods items automatically in the sale order. In automatic free goods configuration system follows two methods
a) Exclusive b) Inclusive
Exclusive:
System configures free goods in exclusive option by free goods quantity is going to be excluded in order quantity ex: 10 items, line item is free, then system configures free goods as a ten plus one.
Inclusive:
System configures free goods in inclusive option by free goods quantity is going to be included in order quantity ex: for 10 items, one item is free, and then system configures free goods as Nine plus one
Note: In exclusive method, other items can be given as a free of charge items for order item
Configuration steps:
Inclusive:
SAP follows condition techniques to configure free goods automatically
Maintain pricing procedure:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  maintain pricing procedure
Choose standard pricing procedure NA0001- free goods (SD) and click on copy as button and re-name it.
Condition type NA00; access sequence -- NA00
Step 2: Activate free goods determination:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  Activate free goods determination
Go to new entries and specify our sales area, specify document PP- as A, customer PP as one and assign free goods procedure ex: NA0001.
Step 3: control free goods pricing:
Control pricing for free goods item category
Choose item category TAN and specify the pricing as a X (pricing standard)
Choose item category TANN and specify the pricing as B (100% discount)
Step 4: Maintain condition type for 100 % discount:
Choose condition type R100 (100% discount)
Step 5: Maintain pricing procedure for pricing:
Choose our PP from position button , select it and click on control data icon and include condition type R100 between steps of discounts & specify requirement = 5 and specify item no: 28 as a 100% discount in alternative formula for condition base value (AltcBV)
The requirement = 55 can be assign to condition type R100. If the user wants to look both
Revenues and sales deductions for the free item since the product that we are going to give as a free of charge item can be sold separately in same sales order the item category of free goods (TANN) has the pricing value as a B then the system calculate value of free goods as 100 % discounts . As we discussed above the same material (that is going to be given as a free of charge item). Some times the same item is going to be given as a normal item, then system calculate price for normal item, system item ( free of charge item ) so here to perform this calculation we have to assign requirement = 55 for condition type R100
Alternative Condition Base Value = (100% discount)
Condition type R100 should be taken as 0 value the formula 28 calculate condition type R100 values as a 0
Set Transfer of cost to maintain (copy and control)
IMG  SD  Basic functions  Free goods  Control free goods pricing  Set transfer of cost to maintain (copy control)
Copy control is a concept by which the system copies the data from source document to target document.
Choose billing type as F2 and delivery document type LF,
Select it & click on item icon & choose item category TAN, click on details icon and
Click on display-change icon and choose item category TAN again select it & click on details icon and check cumulate cost.
Cumulate cost controls whether the cost value (VPRS) is to be copied from relevant for sub-item into main items sub-item cost are not relevant for billing. Save & exit
Maintain copying control:
IMG  SD  Basic functions  Free goods Control free goods pricing  Maintain copy control
We maintain copying control at item level category for free goods. In this field, we can control whether the free goods should also be transferred when we copy from one document to another document.
Choose source document type as a QT & target document type as a OR &
Select it & click on item control button under dialogue structure
Choose AGN item category from position button & click on display or change button, again click on AGN & click on details icon and
Checks re-explode structure/ free goods (this indicator controls whether the free goods are coped from source document to target documents or determined again.)
Save and exit.
Maintain condition records for free goods:
Logistics  SD  Master data  Conditions  Free goodsVBN1 (create)
--Specify condition type NA00 & specify sales org. distribution channel, customer number, valid periods and
--Chose option as inclusive.
--Specify the material number and
--Specify the minimum order quantity,
--Specify the quantity from which the free goods should be applied
--Specify the unit of measure and
--Specify free goods (are free goods) as a one.
Calculation procedure:
We can specify the routines for calculation procedure as a A- (1- pro- rata- proportionate)
A) Pro-rata:
Ex: if the customer places order for 100 cases of material A, that customer receives 20 cases of same material is free. That is the business can say that buy 100 and get 20.
If customer orders for 162 cases, then the system automatically calculate 32 cases as a free of cost. 162 *20/100 = 32.
B- Unit of reference:
When customer order for 100 cases of material A , then the customer receives additional 20 cases of A as a free of goods items that is the business can sign that buy 100 and get 20 free, by inventing 20 free for every full of 100 cases.
If the customer places order for 162, then system automatically grants only 20 cases.
Formula: 100*20/100 = 20
C- Whole Units:
When customer places order for 100 cases of material of A, then customer receives additional 20 cases of material A that is business can say that buy 100 and get 20 free of charge items.
If customer order for increment of 100 that is ex: for 152 items, he get only 20 . If place the order 200 items, the he gets 40 that inclusive.
Condition records for exclusive:
--Specify the discount type NA001 &
--Click on exclusive option and
--specify the sales organization, distribution channel, customer number, validity periods and materials, minimum quantity, order quantity, unit of measure, and calculation procedure, free goods and
--Specify additional material free goods (if other goods are going to be given as free of charge item) save it and exit.
--Go to VA01 and raise the sales order for inclusive and exclusive and see the free goods effects
Condition Type: NRAB free goods; requiremet-55; AltCBV-29(only for inclusive)
When the customer doesnt want physically fee goods and the free goods price should be deducted from total price ten we can use condition type NRAB, which hides free goods line item in the sales document
Settings:
Pricing for inclusive free goods w/o item generation
--Choose our pricing procedure
Include condition type NRAB with requirement 59 and alternative formula for condition base value- 29 between discount condition steps.
--Go to VBN1, maintain condition record for free goods with Inclusive method and make sure that free goods category should be 3( inclusive rebate w/o item generation)
--save it
--Go to VA01, raise the sales order and check NRAB condition type effect.
Requirement 59:
We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases of product A then we receives 10 cases of product free.
If the user would not like the additional like items in the sales order for free goods rather than he discount of 10 cases be represented in the same line item as the other 90 cases. If the free goods discount should not applied as credit for return that doesnt make reference previous discounts.
Alt formula for condition base value-29:
The condition type NRAB is to be assigned with 29 formulas to support inclusive free goods agreements where the user would have to apply the discount to the order item rather than having a sub-item generated for the free quality. Ex: the customer having a free sub-item generated by the system to represent the 10 free cases. The user could like to have a discount applied to the 100 cases like item equal to the value of the 10 cases.
Note: Free goods can only be configuring on only document type C that means. We cant configure free goods inquiries in quotations.
rewards if useful.

Configuring requirement : ordered item to absorb cost of free goods

Hello Friends,
I need to configure this in SAP SD.
The main item should accumulate the cost of the free goods.
I have set the cumulative indicator and deactivated pring for this item.
Do i still need to configure the stock value for the free goods as cost free item? Or is this step only applicable for
another scenario, like,
If I were to activate Pricing such that free goods is displayed as subitem and VPRS configured as cost and discount set to 100%
1. Set Item category to TANN using FREE usage AND
2. use condition type RL00 with requirement 55.
3. use pricing type B.
regards
Ravi

Read this SAP help at http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm and the topic Free Goods in Sales and Distribution Processing for details.
Also go through each step of the configuration of the path at SPRO->Sales and distribution->basic functions->free goods.
Regards,

Config of free goods?

I'm an ABAPer so forgive if my question is not clear to you SD guys. We are having an issue with creation of orders and the functional consultant might be new to this problem.
I read several threads here regarding the config.
1) I checked transaction VOV4 for OR-NORM-FREE-TAN-TANN. it's there
2) Checked material master MM03 / Sales Org. 2 for category group. Group of material is NORM.
3) Checked free goods determination in VBN3 for Customer-Material combination, there's a value there and is valid from 12/22/2008 to 12/31/9999 (valid indefinitely)
But when we try to create an order in VA01, using the same customer and material (from number 3) and set the item category of the material to TANN, the system automatically changes it to TAN.
(On the technical side) I checked the exits MV45AFZZ and MV45AFZB and there is no routine there that does the change from TANN to TAN so we're convinced that this is caused by some config.
Can anyone help? How can the item stay as TANN (without having to retype. When it is retyped, it's like the item category is being forced into the system, right?)?
Thanks in advance.

Hi,
What I undersatnd is , you want INCLUSIVE free good sdetermination.
For example, for every 10 units 2 units are free. That means 20% free goods.
If Customer has ordered for 10 units then he has to pay for 8 units and 2 units will be free of charge.
In standard, the free goods condition type is NA00 (with item generation).
So, you need to create the Condition record for NA00 in transaction VBN1 and specify the free quntity properly.
In standard, the Pricing Procedure for free goods determination is NA0000.
You need to assign this procedure to the Sales Area in which you want to create the Sales Order (V/N6).
Now, when you will create an order for the above material say M1 for 10 units, system will split it as two line items.
First line item, M1 -
8 units -
TAN (system will calculate price for this item).
Second line item, M1----
2 units -
TANN (no pricing, it is 100% free).
You need not have to specify the Item category mannually.
For the first item (Main item), system will automatically take the Item category as TAN and for the 2nd item (sub-item) item category will be TANN.
Regards
Pradyumna

Handling Type in Free Goods Item (IS-OIL)

Hello,
Could anyone give me a suggestion how to enable Handling Type field (VBAP-OIHANTYP) for free goods line item (Item Cat TANN) in Sales Order?
Currently this field was disable and not allow to enter any value.
Thank you

Hi,
Try to do as mentioned below.
step by step process for free goods.
1. need to create the free goods condition(condition tables/access seq and types) and pricing procedure and then assign the same to sales area, doc. Priccing proce and cust pri. Procde.
2.you need to maintain the condition records( tcode: VBN1) and maitain the data as mentioned
above(check Notes 2 sheet)
3. if you don't want the free goods item to be created, then you need to add the NRAB condition type to the pricing procedure(document pricing procedure not Free goods pricing procedure) and need to maintain the condition record for this
condition in VK11.
once all this is done, you can see free goods price reduced in the net price and if additional item is added, then you will the quantity (as per condition record) for that free good.
Thanks,
Srini.

Pricing error in free goods position

Similar Messages

Maybe you are looking for