Print a section from a specific printer tray

Hello to everyone. I need some help for solve a little problem with Crystal Report.
I have a report where a specific section (that contain a bank giro slip) need to be printed from a specif tray of my digital printer, because need a special kind of paper.
I can do with Crystal Report? Or I need a third part application? There is one?
Thanks in advance and sorry for my little english.

CR cannot do this. You could create a an application to print just the one page to that tray. If so you will need a developer available and then post your question to the Developer forum if you need help.

Similar Messages

Print a report to a specific printer from Forms

I have a form from where i want to print a report to a specific printer (not the default printer). Is there any way to do this from Forms 9i. Im using the Orarrp but it pops up the printer dialog and shows the default printer. Is there any way to harcod the printer name. the printer is on the network..

If i go to my control pannel and see the list of printers i take the printer name from there. should i put the path of the printer? i kno the port of the printer .it come like ip_192.1.11.1_p1 ..how do i define the printer name? if i dnt give the printer name shouldnt if fire to the default printer ..my code is as follows
declare
REPID REPORT_OBJECT;
V_REP VARCHAR2(100);
REP_STATUS VARCHAR2(20);
BEGIN
REPID := FIND_REPORT_OBJECT('CUS_PRINT');
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_DESTYPE,PRINTER);
     SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_SERVER,'test');
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_OTHER,'P_CUSREF='||:CTRL01.CUSREF||' PARAMFORM=NO');
     MESSAGE('SET REPORT PROP');
V_REP := RUN_REPORT_OBJECT(REPID);
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
MESSAGE('RAN REPORT');
WHILE REP_STATUS IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
     REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
END LOOP;
     IF REP_STATUS = 'FINISHED' THEN
          IF NVL('TEST',' ') <> ' ' THEN
          GEN_ALERT('NULL_ALERT','TEST');
          END IF;
          ELSE
     GEN_ALERT('NULL_ALERT','Error when running report');
     END IF;
END;
what should the desformat of the report should be..when im trying to run this it gives me 'no data found' error...why???

When i print a pdf from preview it prints strange characters - it looks fine on screen

when i print a pdf from preview it prints strange characters - it looks fine on screen

You can also try opening the PDF with preview, then doing a copy and paste to TextEdit and printing from there.
Adobe makes it easier, but you do have software to accomplish this.
Only download Adobe reader from this site, to avoid "fakes/spoofs/malware" that will cause damage to your machine.
http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
Hope this helps

Print crystal report to a specific printer tray

Greetings -
I need to print out a report to a specific printer tray, can you please let me know how I set it up?
Thanks,
Lava

Hi Lava,
According to what I can understand you would like to print the Crystal Report to a specific printer.
In order to print the crystal report to a particular tray of a printer you need to set the printer from the Crystal Reports application.
This can be done from u201CFileu201Dmenu->Print. Select the printer if it is already added else you can add anew printer.
I hope this helps you.
Regards,
Prashant.

Printing Reports directly from to a printer via 10g forms (Linux)

Hi all,
I need to be able to print Reports directly from a form to a printer (bypassing the form output) on Linux (RHEL 5). The trick here is this is Linux, not windows so, wasn't sure how to deal with printers in this case.
I have the option working where I can run a report and set the options to "Cache" and PDF and it displays my outputted report directly in a new browser window w.
I use the SET_REPORT_OBJECT_PROPERTY, RUN_REPORT_OBJECT, and WEB.SHOW_DOCUMENT properly for the PDF in a window.
a.) I want to send them directly to a printer, preferably to a user's default printer on their PC, bypassing the output screen. How can I accomplish this?
b.) I also would like the ability to generate a PDF (bypassing the output on a browser window) and put the form in a specified directory on a client's PC (which is what I used in 6i Client/Server). I believe I need to utilitize the WebUtil to allow this to happen. Otherwise, I'm thinking I just build a queue for the user on the Linux server and build a screen that shows all the reports they've generated for the past X amount of days and let them open them up and print from there.
Any help (particulary for Part A) would be very beneficial.
Chris

1)
if your app server is on a Linux server, for direct printing to work, the printer must be setup and accessible under Linux server using system-config-printer command, for PDF printout you probably want a postscript option checked
if you print to screen (PDF) and then use print option then your windows client machine must have access to the printer
2)
you must pass this printer name as part of the report parameters.
set_report_object_property(oRptObj, report_destype, Printer);
and
hidden_action := hidden_action ||'&report='|| cRptSrcFile; -- source of report program to call
hidden_action := hidden_action ||'&destype='|| cDesType;
hope this helps

How can i print in color from a dell printer using a mac

Can anyone tell me how to get a dell 2155cdn printer to print in color from my mac computers?

This does not envolve the Mac, as it does the printer to print in color you must have a color cartiridge to print in color, check and update the dell software so that it supports which operating system your on problay: Mavericks or Moutain lion this can be found in the top right corner under "about this mac"
-Hope this Helps

Help, I cannot print letters, etc. from new HP printer

Help, I do not know what else to do, was on phone for long time yesterday trying to find a solutiuon. Printer does not work with computer, etc.

Jlin ,
Welcome to the HP Community Forum.
With whom did you speak on the phone?
Did you contact HP Technical Support?
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
========================================================================
What kind of HP Printer do you have -- What is the model number?
Your printer should have its own Website Support Pages -- the instructions below will help you find the Support Website and help you install the printer software.
In general, you should first install the Full Feature Software for the printer onto your computer:
Install Full Feature Software – Printer
The installation of the printer software may allow you to print from the computer to your printer.
If you provide more information, someone may be able to provide suggestions. Please include what you have done thus far to try and resolve the problems you are facing.
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Unable to print full page to 1 specific printer while other computers can.

I have 1 computer (Windows 7, 64 bit) which is unable to print full page to a Xerox Phaser 7760GX. I have other computers (Windows 7 64 bit and Mac OSX Mavericks) which are able to print perfectly fine to the same printer. This only happens in Adobe Acrobat XI Pro, not in other software I have tested. The same PDF's also print to other printers without problem.
So far I have:
Re-installed drivers (including the Xerox Generic Drivers)
Set it to print as image (which makes it full screen, but also greyscale)
What happens when I try to print normally, is assume the page is portrait. It will print it landscape, on the right side of the page (so it takes up half the page). It will also send out a blank page after it. Has anyon else experienced this and come up with a different solution?

Glad you solved your problem. On Aperture 3.02 I find no expansion slider. Where is it in 3.01?

Printing a document to a specific printer - Linux RedHat

Is it possible to print a document to a particular printer with the jdk1.4 in Linux RedHat? I am trying to select a printer with the following program (where args[0] is the name of the printer) but even though it seems that the program selects the right printer service the output allways goes to the default printer of the server.
public class PrintFile {
public static void main(String args[]) {
          String printername = args[0];
          String filename = args[1];
          if (printername != null) {
          if (filename != null) {
          try {
          javax.print.PrintService myprintservice = null;
          //Document flavor
          javax.print.DocFlavor flavor = javax.print.DocFlavor.INPUT_STREAM.POSTSCRIPT;
          //Print service for
          javax.print.attribute.PrintRequestAttributeSet aset = new javax.print.attribute.HashPrintRequestAttributeSet();
          aset.add(javax.print.attribute.standard.MediaSizeName.NA_LETTER);
          //Creating the Print Service
          javax.print.PrintService[] service = javax.print.PrintServiceLookup.lookupPrintServices(flavor,aset);
          if (service.length > 0) {
for(int i=0;i<service.length;i++) {
if (service.getName().equals(printername)) {
myprintservice = service[i];
break;
          if (myprintservice != null) {
          java.io.FileInputStream file = new java.io.FileInputStream(filename);
          javax.print.Doc doc = new javax.print.SimpleDoc(file ,flavor ,null);
          //Send the document to the printer
          javax.print.DocPrintJob pj = myprintservice.createPrintJob();
System.out.println("Printing to: " + pj.getPrintService().getName());
          pj.print(doc, null);
          file.close();
System.exit(0);
} catch(Exception e) {System.out.println(e.toString());}
Is this a bug or am I missing something?

Yes, I've got the same problem, too. First I get all the print services using PrintServiceLookup.lookupPrintServices(DocFlavor flavor, AttributeSet attributes)
Once I have the array of PrintService object I get the one that I'm looking for:
for (int i=0; i<services.length; i++) {
PrintService ps = services;
if (ps.getName().equalsIgnoreCase(myPrinterName)) {
myService = ps[i];
break;
But when I try to print through the object "myService" the printing always goes to the same printer!!!

How to disable printing and emailing from a specific pdf in iBooks?

I need to prevent the iPad user to print or email a pdf published in iBooks. Thanks for your help!

I don't believe that Apple sells PDF files from the iBookstore, only EPUB files.
If you created the PDF file in Acrobat, you can set security (see the Help file in Acrobat) but if you installed it in iBooks application, I don't know if Apple respects the security you set in the PDF.

Pictures print very strangely from Canon MX860, printer or Macbook issue?

I recently purchased a Canon MX860 printer to go with my two-month old Macbook. During setup the printer would not print the head alignment patterns correctly. I do not know if that is a related issue to the picture printing problem I am having.
When I print anything from my Macbook (pictures off my Canon camera or pictures off the internet and even graphics from Canon's site), they come out very odd looking. All the colors are printing and I have checked everything suggested in the printer's online help sections. The problem is that only in certain areas of the pictures are colors coming out reversed or mixed up. For example, I tried printing a picture of my blue-eyed, black and white dog in a snowy landscape with green pine trees in the background. The landscape came out relatively normal looking with white snow, green and brown trees and a light blue sky. My dog cam out with the main areas of her white and black coloring looking normal, but her nostril holes came out white and part of her black nose is pink and blue, while the outer edges of the nose are black like it should be. Her light blue eyes came out solid black while the black "eyeliner" around her eyes is pure white in the printout. The darkest shadows on her face came out with white, blue and pink dots, fading into darker colors towards the outer edges. Her white eyebrow spots came out reversed with the highlights in her fur being black and the shadows being white. But her white muzzle is white like it should be.
I don't get it. How can the printer selectively print some pieces of the same picture incorrectly and some correctly? Did I get the wrong printer to go with a new Macbook? Am I missing some updated driver? Did I just get a dud printer? Please help.

Whether your issue during setup is related or not, I couldn't tell you. However, you definitely want to get that sorted out as it's bound to cause problems otherwise.
Unfortunately, I'm not even sure where to begin troubleshooting for you. Have you tried Canon's website or their support? You might get better answers there.
~Lyssa

Print a string on a specific printer

Hello everyone,
I need some help.
I have to print a string in LabView. Previously the method used was to set on the option "Automatically print front panel every time VI completes execution" in the Print Options of the VI Properties.
Now, however, I should dynamically select the printer on which to print this string. The printer name is dynamically loaded from a text file.
Actually I'm trying to use the Print Report function (Easy Text Report.vi) that works fine, but it creates problems during the compiling: it create 3 folders in the directory where the executable is located (here the folders: NI_HTML, NI_report, NI_Standard Report) with all the VI "in freedom", not compiled but copied in there.
There are other methods to print a string through the name of the printer, or to solve this problem of creating random folders and VIs?
Attachments:
PrintTest.vi ‏9 KB

Your application does something internally that depends on the VIs being stored flat inside the executable. LabVIEW 8.x layout basicaly creates one flat archive inside the executable with all VIs stored in one level. That means it can not store VI files more than once with the same name. The Report Generatino Tools are however written using LabVIEW OOP which requires VIs to be named the same in order to allow dynamic dispatch.
If you deselect the LabVIEW 8.x layout option, the VIs are stored inside the executable in the same hierarchical structure as they are on disk in the source code of your application. That allows multple VIs with the same name to be placed inside the executable, but it does make the internal file hierarchy more complex.
Bsically you have two options:
1) figure out where in your appliction yoeu depend on internal paths of VIs to be in a flat order. Most likely this are Current VI path nodes that your application uses to strip twice a path element to find the directory in which the executable is located, for instance to find configuration files or similar. Replace this legacy code construct with an Application Directory property which will return the directory your executable is in rspectively the directory of your project file when you run your app in the devlopment environment.
2) Live with the extra files outside of your executable!
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Pdf document not sized properly when print is intiated from Outlook Quick Print

I have some pdf documents that print properly (fit on printed page) when the PDF is being viewed within Adobe Reader X (10.1.4) and I initiate printing from right within Adobe Reader. However, when the same PDF is printed via Outlook's "Quick Print (with the job being routed to Adobe Reader but not initiated by Adobe Reader), the resulting PDF printout is slightly shifted and sized incorrectly.
Any ideas as what the problem might be? We're trying to set things up so that PDFs sent to a special Outlook email address are automatically printed without user intervention.
Thank you.

I believe the PDF you are trying to print is "larger than A4 in size". When we explicity open Reader and print the pdf doc then it scales down the pdf page size but when you print directly from outlook then it prints as per the original size of the document.

Print too small from computer to printer.

I have a 6700 premium. The print is very small. How do I make it larger?

Hi,
Normally we control font size from application, which application are you using ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Awakening Officejet Printer 4610/4620 from sleep to print by wireless from HP Laptop

If I leave the Officejet 4610/4620 Printer on for several hours, I have to turn it off and back on if I want to print from an HP Laptop, Windows 7, using a wireless modem.

Hi,
Please install this firmware update for the printer.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104396-2&cc=us&dlc=en&lc=en...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Print a section from a specific printer tray

Similar Messages

Maybe you are looking for