Print from an Add-On

Hi Experts,
We have devloped an Add-On that integrates with MapPoint to define delivery routing. I would like to be able to print the relevent Delivery documents when I confirm the selection in my Add-On. Is it possible to send to B1 the document number and tell it to print the relevent Delivery on its assigned PLD and to the default printer?
thx,
Richard

HI,
you cannot design PLD for your addon but you can use crystal reports...........

Similar Messages

  • Adobe Reader bypasses "secure print" settings when printing from IE add-on

    We have the IE add-on for Adobe Reader enabled (Internet Explorer 9), and we've found that for some people this is causing PDFs to get printed without the "secure print" option, even though the print dialog shows it. Our printer settings all have the setting enabled for "secure print", which requires you to enter a PIN on the printer before the print job will be released. When printing PDFs from Adobe Reader (currently 11.0.3, but I couldn't see anything in the release notes for .4, .5. or .6 that are relevant) outside of IE, secure print works fine, but when it's opened within the Adobe Reader plugin for IE, the secure print setting is enabled but the print job gets sent to the printer without the PIN requirement... somehow.
    I'm completely stumped by it, and didn't even believe it until I saw it myself.
    Does anyone know what might be working differently when a PDF is printed from the add-on than when it's printed by a 'full' instance of Adobe Reader?
    On an affected PC, if you disable the add-on, the PDF opens in that full instance and works normally, so it's very definitely related (somehow) to the add-on specifically.

    Hey,
    I have been advised against monitor calibration, and I'm assuming if all of my other products have come back correct in terms of colour I see on screen that it should be ok?
    the person that told me about the Adobe workspace has the same printer, but she works in Photoshop, and had someone set it up for her. She tried to help over phone, but is difficult as we have different versions of Adobe software, and it was a while since she had it done.
    My workspace is currently in RGB, so would you suggest working in CMYK?
    If I have my workspace set to Adobe RGB (1998) should I then be changing my printer profile to the same one?
    I've attached the colour setting screen shot, I've not done anything to change this.
    I think I need the setting on bottom image set to 'colour sync' is that right?
    I'm also not sure about the relative colourimetric option. When at art college, I was always told to print in perceptual, but not sure which is best option here.

  • HP ePrint from excel add-in: Error while getting driver name for printer

    Trying to use add-in for ePrint from excel/word I get, "error while getting driver name for printer \\...HP DesignJet 800PS 42 by HP," with an option to select "OK" and that same message repeats with each printer in our network, and then it doesn't allow me to print using the add-in. However, I can print normally to HP Go Web, open up Print and Share,  then print it from there. This happens with excel and word. I have Office Suite 2007.

    Hello modameister,
    Sorry you are having issues with this printer and the ePrint add-on.  There are a couple of questions I would like you to answer please.
    1.  What operating system are you using? (XP,VISTA,7,MAC OS X)
    2.  What and how much data are you trying to print?
    3.  Have you tried to copy and paste the data into a different application or tried using the snip it tool?
    4.  Are you receiving any .dll errors (mscms.dll)
    Thanks
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • How can I add my HP Photosmart C4180 to my home network so that I can print from any of my computers

    I am trying to set up my HP C4180 to my home network so that I can print from any of my computers without having to have them attached by USB.
    The YouTube video I watched was for a different HP printer and the installation of my HP C4180 did not give me the option of selecting printing through a network.
    I currently have the printer attached to my desktop, but do not like having to keep the desktop on just so that I can use its shared printer. Is there a way to add the printer to the network independent of my desktop?

    You could buy a router that supports USB printers, but with that (and your current setup) you can only access printing, not scanning.
    I recommend a new wireless printer.  They are not very expensive and can be placed anywhere in your home that has wifi access.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

    I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
    Thanks,
    Ivette

    You would need to get the IP address of your printer then manually add a network print queue.
    To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

  • TS3999 How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.

  • How do I add my Apple MAC computer to print from my hp 6500 E710n-z printer?

    How do I add my Apple MAC computer to print from my hp 6500 E710n-z printer? 

    - Go to System Preferences > Print & Scan
    - Click the '+' sign at the bottom of the list of printers.
    - Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • 'Dunning Letter Print from Dunning Letter Generate'

    hi,
    How can i run the "Dunning Letter Print from Dunning Letter Generate" standard program without runing the spwaned program called 'Dunning Letter Generate'.I mean i want to run the 'Dunning Letter Print from Dunning Letter Generate'(execution method: report) independently.
    I need to pass the parameters to the 'Dunning Letter Print from Dunning Letter Generate' directly instead of passing to the spwaned program ''Dunning Letter Generate".
    Thanks
    Devender

    Hi Gareth,
    New parameters to be add are:
    Tier : <xxxx>
    Service Segment: <xxxxx>
    Account Manager: <xxxx>
    Location where I am picking these 3:
    navigation:select any AR responsibility
    customer->standard(query with any customer)->customer address
    we have enabled 'site use information' dff in customer address window, from this dff we are taking these 3 parameters.
    reason to add these 3 parameters:
    we cant treat all the customers same. so we need to send some smooth(no harsh) dunning letters to some of our most trusted customers. so how can we identify gud customers in the list.
    so we have enabled site use information dff. those customers who is have values for these 3 parameters. will be treated as v good and reguler customers for us. so for them we can send other dunning letters.
    note*: this is to identify the customers like reguler customers,non requler customers.
    bez in spwaned program we have parameters like 1.customer low 2.customer high. thats it .so it is very difficult to find out the nature of customer.
    pls advice me on this..to proceed further..
    Thanks
    Devender

  • Print from ipad if i connect a usb connector to my ipad can i connect my printer to it and print??as im thinking of buying the new ipad for work but i must be able toprint

    hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.

    If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
    Activate AirPrint in Mac OS X;
    http://netputing.com/airprintactivator/
    Add AirPrint to Windows;
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

  • Cannot print from hp DeskJet F4580

    I have just bought my first MacBook with Mac OS X 10.6.4. Great computer.
    However I cannot print from the wireless hp printer. I downloaded the latest driver from hp (maybe a fault) and started to install. Everything went as expected untill the setup process of the Printer Queue. Here I add the printer in order to create the Printer Queue, but when I click on the continue buttom I get this warning: Are you sure you want to continue without adding a Print Queue? I finished the installation with a congratulation sign.
    Therefore there is no doubt, that the printer queue is missing. However I cannot found out to install the printer queue.
    The printer is a socalled all-in-one printer. The scanner function is perfect with the wireless connection. But not the printer function.
    I have also tried to connect via usb cabel. The result is the same. Scanner okay. Printer not okay.
    The printer works perfect under Windows.
    I hope somebody can help me. Thanks in advance.
    Erik

    I'm having the same problem ! The wireless printing works using OS 10.5 on a G4 PowerBook but not OS 10.6 on an intel MacBook. I'm going to get in touch with HP as have used the latest drivers (as you have) - I've re-installed the HP software using Software Update for the latest version - still can't print. USB printing is also faulty so must be their drivers.
    I'll let you know if I have any luck !
    Simon

  • Setting Up Google Chrome Features for Cloud Printing from an Android Device

    These steps are organized for optimal setup procedure and to decrease the time it would take to set this option up from start to finish. This is a lengthy process and is more for possibly troubleshooting issues that may arise during the setup of Google Chrome's Cloud Print feature. However, if you have an Android phone or tablet and are interested in being able to print virtually anything at anytime from anywhere from your phone to any brand of printer regardless of setup, there is a way. And this is how:
    Open/Install Google Chrome onto a computer
    Sign in with personal email to access the same Google Chrome account you intent to print from
    Download Google Drive as an external storage you can access from anywhere
    Open Google Chrome Settings (three lines stacked on top of each other)
    Scroll down to the bottom of settings and click "Advanced Settings"
    "Sign in/add printers/manage printers" are three of the print options you may see here 
    Follow this link for information on:
    adding a classic printer to this option:  https://support.google.com/cloudprint/answer/1686197?rd=1
    how to add an HP ePrint email:  https://www.google.com/cloudprint/learn/printers.html#info-hp
    on registering the email of that printer (HP registration page):   https://www.google.com/cloudprint/learn/setup-hp.html
    8.  add the printer to this section of Google Chrome
    9.  at the bottom of the page you will see "Send a test page/print test page" (that will be useful later)
    10. at the top of this page is the option to share this printer with other Google Chrome users
    11. Open Google Drive from www.google.com (likely displayed at the top of the webpage)
    Can create a new document of any file type, upload, draw, etc
    Leave computer on if intending to print from off the network or another location
    The next steps are in regards to printing from a mobile device:
    Install/open Cloud Print App
    Add personal email account associated with Google Chrome
    Select printer management if on the same network as the printer
    Select Web tab and Google Drive if not on the same home network
    Find earlier test page in Google Drive Documents
    To locate other documents one could find many applications within this app or
     In another app like Documents To Go, you can select to send previously saved documents (like one might send an email on the Android) to the Cloud Print app to open, view, and print
    Print Test Document – this function means the printer has officially been added now
    In Google Drive, but within the Cloud Print app, you can select the printer that was added to this network or from "Printer Management Options."
    There are many ways to determine if your printer is still connected (offline, ready, etc.) but after confirmation that the printer is available, print jobs rest in the print queue until the printer receives the command to print.  Then the documents are stored and available for reprinting.
     Converts most print jobs to .pdf but prints most file formats from other applications as well
    In Printer Management advanced settings
    You can add a contact from the phone to use this printer
    Set as default
    See an extensive page of setup and printing options
    *After a test print while the computer was off the document did not print and the printer appeared offline until approx. 4 min after computer was rebooted, then the document printed automatically.
    Also if a document does not print, the troubleshooting guide on the phone suggested logging out of Google Chrome Cloud Print but I was unable to find that option it was suggesting (unable to log out)
    To completely finish adding any additional Google Chrome accounts that wish to share this printer using the suggestion in step 10, you must log into the email that was added and select ADD PRINTER from within the email that was sent for the confirmation and follow the link and instructions on how to do this from your email.
    Google Chrome and Google Drive support Windows, MAC, and Linux
    You can also change share options, privacy settings, etc. but if you choose to go with the two-step verification process, you may not be able to add your Google Chrome email account to the app without a 16 digit code generated within Google Chrome Privacy Settings for your app (not recommended)
    Now you have the option to also email any document to either the Cloud Print App or HP ePrint from the phone/tablet without actually accessing the app first.  Locate the document, press the menu button for more options, select "Send to" and a list of available apps will appear.  Choosing Cloud Print or HP ePrint sends the document or photo directly to the "print" function within the apps, instead of opening the app first and then searching for what it is you want to print.
    **computer connected to printer must be on**
    Requirements:  a) Google Chrome, Google Drive, and Cloud Print mobile app  b)  These steps outline the use of an Android device on the network for setup  c) will need the computer connected to the printer to be on at all times   d) go to this webpage http://www.google.com/cloudprint/learn/  if you have any more questions.
    Available features of Cloud Print App
    a.  Print all file formats from Google Drive (uploaded or create)
    b.  Has an internal notepad and drawing tool
    c.  Prints off all contacts and phone numbers as well as specified text messages
    d. The scan option actually just means take a picture
    e. Without Cloud Print Pro you get 5 days to test the features of printing Facebook pictures, Drop Box and Schedules before those features are no longer available
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!
    This question was solved.
    View Solution.

    This document is to assist others in understanding and troubleshooting Cloud Print. This took me many hours to get setup, troubleshoot, and prepare a document that is simple and easy to understand. These are literally step-by-step instructions on how you could be able to print from any Android device to any printer connected to a computer that has Google Chrome.  You would then be able to use the Cloud Print App without having to use HP ePrint to print to any printer connected to any computer (USB or wireless) basically allowing you to print virtually anything from your Android. 
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Officejet 4500 will not print from internet.

    Printer will only print e-mails, will not print anything from internet.  "Unspecified error, Line 2107, Char1, Code0 res://ieframe.dll/preview.js" appears when ever I try to print from internet.

    The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
     We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it.  Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
    1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
    2) Select each printer profile for the printer with an issue, then select remove device/printer.
    3) Reboot
    4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
    5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
    6) Test by printing google.com (uses very little ink when the test page comes out).
     Let me know if you have any questions or issues.
    Thanks,
    Dan
    I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Printing from a Mac Book Pro to a Windows 7 64 Bit Box

    Before I upgraded to Win 7 I have no problem printing from my MBP (snow leopard) to my Canon IP4300 hooked up to my Vista Ultimate Box. Once I upgraded it to Win 7, I can no longer print. We have 2 Mac Book Pro's and this error can be duplicated on both.
    When I set up the printer everything appears to work fine. My MBP see's the Windows computer, see's the printer, and add it's after asking me for my username and password to access the Windows PC.
    However, when I try to print I get this error:NTSTATUS_INVALIDPARAMETER and the job says it is waiting for authorization. So I enter the username and P/W again and same thing happens again.
    I am going to assume that this is a Windows issue but does anyone have a work around or a setting that works?
    Has anyone else seen this error?
    Thanks in advance

    I am going to assume that this is a Windows issue but does anyone have a work around or a setting that works?
    Had to laugh about this. Of course it's a Windows issue (this time...). You didn't change your Mac's, you've installed a new OS that is only a week or so old, that probably won't get updated for a year (based on past performance from Microsoft). Could have just as easily been the other way if you had installed Windows 7 first and then MacOS
    Meanwhile, Windows 7 has new features that you might need to turn off. I've read that the "Home Group" feature interferes with File and Printer sharing to non Windows 7 computers. I'm not an expert with Win7 yet, so I'm guessing...
    I got sick of this years ago and just make sure that all of my printers have an ethernet port. Every OS I can run can print to an IP number. SL changed it's printer system, Vista changed it's printer system, Win7 changed it's network share system. None of this matters at all with a network printer.
    Are all of the machines on the same workgroup? Here's an earlier post with similar issues and errors: http://discussions.apple.com/thread.jspa?threadID=1217688&start=15&tstart=0
    Good luck with the problem.

  • Officejet 6000 computer connected to windows 7. Can't print from windows XP laptop

    Printer connected by USB to the Windows 7 desktop.  Printing is fine.  I have both computers on the same workgroup network, file sharing is ok.  My laptop finds the printer on the network, but there is apparently a driver problem.  The disc that came with the printer will only install on XP and Vista, so  downloaded the drivers for the new windows 7 desktop.  I either get a "Failed to Print" message or "The handle is invalid".  When I tried to connect with the printer through network sharing, and tried to open it, I was told the wrong drivers were located on the server.  It looked for a file with *.inf.  Do I hve the wrong drivers on the desktop or do I need to install the drivers on the laptop?  I never had this problem with my old Vista desktop.
    This question was solved.
    View Solution.

    If it is not wireless it is USB connected.  So you need to choose USB connected and let the program do it's thing.   Are you trying to share the printer from the desktop to the laptop?  If yes, just go to Add Printer and follow the instruction.  Make sure File and Print Sharing is enabled on the desktop.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • More questions on printing from internet

    While I was waiting for an answer to my original question (why my printer won't print from the internet) I found the following two preconditions:
    -  Requires an Internet connection to the printer
    - Requires HP Web Services Account Registration
    So now I also need to know if I have the above qualifications. How do I find this information?
    I shall continue to pursue the ansswers but I appreciate any help.
    Thanks!
    SALLYANNC

    Hi SALLYANNC,
    Just to clarify, you are able to print from the computer but not from the internet?
    I would try printing from another browser to see if you have the same results.
    Try a different browser.
    If you are using Google Chrome as a web browser, please do the following steps:
    Run the updates for Chrome, to make sure you have the latest version.
    Then open the Chrome's browser, go to settings, tools, clear browsing data, clear the cache and site date if listed.
    Close and reopen the browser again.
    Try printing again.
    If you are still having issues, try The Ctrl+Shift+P to see if it will print.
    Update the Java on the computer.
    Go to start, control panel, Java, click on the Update tab and select Update Now.
    I suggest that you to try these steps to resolve this issue if you are using Internet Explorer.
    Method 1: Look at the Security settings for Internet Explorer.
    1. Open the Internet Explorer. Click on Tools.
    2. Click on Internet Options->Under the Security Tab->Security Level Zone->Click on Default Level->Drag the Scroll button and set the Security as Medium level.
    Method 2: You can also add the sites from which you are trying to print to the Trusted Zone which will restore the functionality of these sites.
    1. Open Internet Explorer and go to Tools-Internet Options-Security.
    2. Click the "Security" tab and choose the "Trusted Sites" icon.
    3. Then click on the button "Sites". A window will open, where you can add any sites that you wish to be in the Trusted zone.
    4. Enter the site of interest in the line provided. Site URLs can be typed in directly or entered by copying and pasting. After entering a site click the "Add" button.
    5. The site is now added to the list of trusted sites.
    6. Enter the next site and repeat the procedure.
    Method 3: Also check the following settings:
    1. Open Internet Explorer.
    2. Click Tools, and then click Internet Options.
    3. Click the Advanced tab.
    4. Under Browsing check the option “Enable third party Browser Extensions”.
    If you are using Firefox, then take a look at this document. Fix printing problems in Firefox.
    What web browser are you using? (Chrome, Firefox, Safari, Internet Explorer)
    Are you printing a email or a webpage?
    Let me know how you make out.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for

  • All my mp3s were moved to trash and iTunes still sees them!

    I have a rather odd situation regarding the most current version of iTunes and my mp3s. Recently, I was having trouble getting my ipod nano to be recognized by iTunes. After doing much reading on this site, I found that one of the problems had to do

  • Can I upgrade to an Intel core 2 Duo processor from my Intel core duo processor ? If so, what all must be replaced.

    Can I upgrade to an Intel core 2 Duo processor from my Intel core duo processor ? If so, what all must be replaced. imac <Edited by Host>

  • 44k to 48k?

    Hello Many pops in my music bed in an NTSC DV sequence - I checked and the audio which came from a CD is 44k. Seq is 48k. Do I have to change the audio to 48, if so how, or won't FCP 4.5 do it automatically when I render? Thanks KB

  • FM Z_EASYDMS_GETDOCDEFAULTS

    Hi Gurus, I am having problems in which when I create a document in a folder in Easy DMS. Site specific information from the folder are not copied in the new document. Can you please help me on this? Thank you!

  • CS4 Design Premium installation failure on Win-7

    I have tried this installation a number of times now and continually get a problem with kb403891r2 error regarding the UninstallColorProfilesRollback preventing the installation. I have tried both solutions I was taken to by the Adobe Support advisor