PRINTER IS IN OFFLINE STATUS

HOW DO I GET MY PRINTER BACK ON FROM OFFLINE STATUS?

Just right-click on the printer icon and select 'Use Printer Online'.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

  • Go to Offline status after sending print in HP

    Hi everybody.I have two HP Laserjet 4100. Both of them after sending print from windows go to offline status and an error message appear (Yellow Error BOX in notification area).Printer screen show Ready message. The light on the printer is green and fixed. I connect printer with LPT cable to PC.I can get test print from printer menus without any error. I test printer on windows XP 32bit and windows 7 64bit. I get driver from HP Support And Driver Download Center. I install any type of driver (XP 32bit/7 64 bit/ Universal PCL5)I try to use Doctor Hp to find problem but this application is not support LPT connections. I do Cold reset and reset maintenanc counter (With holding left arrow of Items and Value keys).I used 3 diffrent and new LPT cable. I confused and tired!Please help me to solve this problem.Thanks

    Right now it appears you are having communication issues from the computer to the printer since the printer will print test pages.  The first thing you will want to do is use one of the 32bit computers attached with parallel cable to test communication from the port to the printer.  With the printer connected to the port and I assume the lpt port is lpt1, go to start and run and type command and hit enter.  At the prompt that appears in the black box type cd\windows and hit enter. Now at the C:\windows prompt, type dir >> lpt1 and hit the enter key.  Does the printer data light start to flash and does the printer start to print pages.  If it does, then communication is fine and you need to remove and reload the printer using the correct driver.  If it does not print then you have an issue with the port on the computer, the cable or the port on the printer.  Since it happens with two printers I would think that would eliminate the port on the printer.  You may want to check the port setting in the BIOS of the computer.  Most ports are Standard, ECP and EPP.  Best to set the port for Standard when using an old legacy printer.  Good Luck.

  • HP 6490 running on windows 7. Cannot get printer from offline status. prints ok from laptop.

    I have a 6940 printer running on windows 7. Went on vaction and had everything turned off for a week. Turned everything back on and now printer will not come out of offline status. Printer is on home network plugged into a router. Printer will print from my laptop using XP. Everything was fine before.

    Thanks for the reply.
    When I use Remote Desktop and use the Public IP of the router without the port number (49250), I am able to get into the server. However, when I try to use RDP with the [Public IP]:49250, it will not connect to the 192.168.0.30 workstation.
    Right now the router is program to forward port 49250 requests to the 0.30 workstation.
    I am going to work on the Inbound/Outbound Firewall settings today and see if this will resolve the issue.

  • ICloud showing offline status

    I have enabled the "FFM" in the admin account...    
    But the thing is.....even though i am logged into the admin account and go to the icloud website and search for my mac....it is giving me offline status (I am
    connected to wifi)..
    Any insights on that???

    I have a printer not being found on our network on one of our Windows 7 Enterprise 64-Bit systems (system has been in use a while but comes from same base image as working systems). Printer is on, network configurations are correct. Other systems print no problem. One strange behavior on the system was the printer was installed but would show as "Offline" - resetting print spooler would fix issue but within 5 minutes printer would go offline again - I assumed I could uninstall, remove print driver/port, etc and just re-install but upon that attempt I was met with the attached image. Have rebooted/cold started of course, checked for strange power settings on NIC, re-verified configuration on printer in question, test printed from various sources with no problem. I know the problem is with the Windows 7 system but I'm just not sure of...
    This topic first appeared in the Spiceworks Community

  • Network Printers go to offline status

    Windows 8.1 32bit
    shared network printers go to offline status, but are not offline.
    when I reboot it resolves the issue

    Hi,
    Please check if the printer spooler service is running when this issue occurs. I suspect it is corrupted somehow, you can check the event log to see if there is any clue.
    Alex Zhao
    TechNet Community Support

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • Win 8 and 8.1 client showing shared printer server as offline

    Hi,
    we have a problem with our print environment (HP and Ricoh printers).
    We have some Windows 8 and 8.1 clients and a Windows Server 2008 R2 printserver.
    Windows 8 and 8.1 is showing the printers as offline. Its seems the problem described here ->
    http://support.microsoft.com/kb/2713128
    We already installed the fix on the server but this didn't resolve the issue.
    Maybe somebody have the same issues and an alternate solution for this?
    Best regards

    Hi,
    Thanks for posting in the forum.
    So far, there's no fix for Windows 8. Since you have tried the hotfix you mentioned without any help, please also try to install this update to see if it could help.
    Update rollup: Fix printing problems in Windows 7 and Windows Server 2008 R2
    http://support.microsoft.com/kb/2647753
    If the issue persists, please try to refer to the following articles to troubleshoot the issue.
    Printer shows as “Offline” in Windows 8 (Workaround)
    http://www.blakepell.com/Blog/?p=611
    How to: Fix a network printer suddenly showing as offline in Windows Vista
    http://blog.rtwilson.com/how-to-fix-a-network-printer-suddenly-showing-as-offline-in-windows-vista/
    As it mentioned in the article above, please try to open the print queue dialog and choose “Properties” from the “Printer” menu that it would connect to the printer and bring it back online.
    Also, maybe disabling SNMP support for network printers will work.
    Here are some similar threads as reference, hope they could help.
    Network printer shows offline on Windows 8
    http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/network-printer-shows-offline-on-windows-8/7851703b-492c-4e97-8063-f1fc2aa63ec0
    Network printer still connected, but shows as offline
    http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/network-printer-still-connected-but-shows-as/90e0dd64-d4a3-41f2-a361-05947988bdee
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.

  • How to disable the print icon on check status screen of shopping cart inSRM

    Hi Experts,
    I have a requirment in which I need to disable print Icon on the status screen of the shopping cart.
    Can anybody please let me know how to achive this requirement.
    Thanks,
    Arun K Singarapu

    Hi Here you go some useful code for the requirement.
    wafunc = 'BWD'.
          APPEND wafunc TO functab.
          wafunc = 'FWD'.
          APPEND wafunc TO functab.
          wafunc = 'DIS'.
          APPEND wafunc TO functab.
          wafunc = 'COP'.
          APPEND wafunc TO functab.
          wafunc = 'IGN'.
          APPEND wafunc TO functab.
          wafunc = 'SAVE'.
          APPEND wafunc TO functab.
          wafunc = 'HIS'.
          APPEND wafunc TO functab.
          wafunc = 'CONTACT'.
          APPEND wafunc TO functab.
         SET PF-STATUS 'OBJECT_SEL' EXCLUDING functab.
    Bala.M

  • Production order print out in CRTD status.

    Dear Expert,
    Please guide me for how to take print out in CRTD status for production order.Has a work around I try to create status profile but still not able to make it.
    I dont want to change the settings in BS22,since its effect globally.Please let me know how to create the status profile for the same to allow system to take print out in CRTD status,since I read the others thread mentioning that it is possible with status profile.
    Regards.
    Swapnil

    Swapnil,
    This is not possible without changing system status in BS22 for business transaction RMDR for status I0001.
    Check below SAP note 157422 - PM/SM: Printing orders in status Created for more details.
    And I do not think this can be done with Status Profile in oder.
    Br
    KK

  • CM 4.4.7 Online and End Devices 4.2.3c Offline status

    Hallo all,
    I am running WAE-512-K9 and the Central Manager was upgraded to 4.4.7 and the Some Application Accelerators are running 4.2.3c and they seem to be showing "offline status " but they are still optimizing save for the status being "offline"
    What could be the Issue here ?

    Hi Erasmus,
    Are all accelerators running version 4.2.3c showing offline or just few? If all on same version are showing offline it could incompatibility issue between versions.
    You can also go to the application accelerator CLI and execute the command:
    show cms info
    See what it shows. Check the connectivity between accelerator and CM. If it is fine and nothing has changed (like FW rules in between accelerator and CM) try doing the below and see if that resolves the issue.
    cms deregister force.
    Once deregistered go to config mode and do "cms enable".
    Check the show cms info again.
    Regards,
    Kanwal

  • HP printer is in paused status and will not print. HP6520

    How to remove the hp6520 printer out of paused status?

    Hello BJClayton,
    Welcome to the HP Support Forums!
    I would like to offer a hand in an attempt to resolve the paused printer issue with the Photosmart 6520. What is the Operating System installed on the computer, Windows or Mac?
    Also, how is the printer connected to the computer, USB or Wireless?
    If Windows, please run the HP Print and Scan Doctor. This will look into the drivers, software and communication that the printer users and try to fix the paused status.
    Let me know the results, if you are able to run it, and we can take the next steps if any are needed.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Script for getting the online/offline status

    Hi all,
    After enabling checkbox of "Enable assistive access device" is possible to get the online/ offline status.From Menu we will get the status.Without doing this i want to get the apple mail account online/offline status.hope some help scripts for this.

    [That script|http://discussions.apple.com/message.jspa?messageID=11012484#11012484] could change the Online Status of all mail accounts. The following one will just report their Online Status. Is this what you are (were) asking for?
    --BEGINNING OF SCRIPT
    tell application "Mail" to activate
    tell application "System Events" to tell process "Mail"
    set theMenu to menu "Mailbox" of menu bar 1
    if enabled of menu item "Take All Accounts Online" of theMenu then
    return "All accounts are currently offline"
    else
    return "All accounts are currently online"
    end if
    end tell
    --END OF SCRIPT

  • My virtual printer has an error status

    i have just downloaded the adobe createpdf virtual printer and have just used it to 'print my first document' however the document is still in the que for the printer and has a status of 'error' i have called tech support but i dont think they are open at the moment and im doing an assignment in MYOB that requires a virtual printer.i have a laptop with windows 7 on it. if anyone could help that would be awsome.

    You may use following forum:
    http://forums.adobe.com/community/createpdf?view=discussions

  • Online or Offline status

    I love the way the Adobe Forum is structured where you can
    see if a user is online or offline. I wish to produce the same
    method. I have a list of users in my admin page where I see the...
    Username | First Name | Last Name | E-mail
    I wish to make a fifth column called status that would have
    online or offline such as...
    Username | First Name | Last Name | E-mail | Status |
    MySQL statement looks as such...
    CREATE TABLE `adminusers` (
    `userID` int(11) NOT NULL auto_increment,
    `userName` varchar(50) NOT NULL default '',
    `userPassword` varchar(50) NOT NULL default '',
    `emailAddress` varchar(50) NOT NULL default '',
    `firstName` varchar(50) NOT NULL default '',
    `lastName` varchar(50) NOT NULL default '',
    `date` timestamp NOT NULL default CURRENT_TIMESTAMP,
    `userTypeID` int(11) NOT NULL default '3',
    PRIMARY KEY (`userID`)
    ) ENGINE=MyISAM DEFAULT CHARSET=utf8 AUTO_INCREMENT=1 ;
    I believe that the online/offiline status is a boolean
    statement but I am not sure and do not know how to incorporate it.
    Can someone help me what I must do. Thank you all for your
    help.

    AdonaiEchad wrote:
    > I love the way the Adobe Forum is structured where you
    can see if a user is
    > online or offline.
    There is no way that you can tell whether someone is online.
    The web is
    stateless. All that Adobe is doing is taking an arbitrary
    time since
    that individual either logged in or last clicked a link. It's
    done by
    updating a timestamp each time the visitor clicks a link.
    Online or
    offline status is determined by the time elapsed since the
    last activity
    (usually 5 or 10 minutes).
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Determining the Outlook Offline Status on a server remotely

    Hi All, I'm currently working on a project that can remotely monitor the offline status of Outlook that is running on a server. 
    Overview: I have a VM who's only function to to check and forward a specific email once a day. I need to know when  the VM is down, Outlook is not running or Outlook is offline. I have been able to determine if the VM is down and if outlook is running
    but I'm struggling with the offline status Outlook.
    Here is my code (straight foward)...vbscript
    strComputer = "VMEmail"
    Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2", "outlook.Application")
    PD_VM_OTKSTATUS = objWMIService.Session.Offline
    Wscript.Echo PD_VM_OTKSTATUS
    I'm getting a error "File name or class not found during Automation operation: 'GetObject'"  Code: 800A01B0
    I want to run this script from my machine. If you know whats going on or a better way to solve my problem let me know I'm open to suggestions. Also I don't consider myself a programmer/coder I'm just able to take other code and make it work the way I want.
    Thanks in advance

    I should also note that you cannot get a link to a remote application.  You can run a script on the server that can  attach locally.
    You would find it better to write a macro in Outlook that monitors the online status  (which will only show online if you are using Exchange direct and not SMTP.
    The VBA code can be looped to look for the connection and alert when it fails.
    It would make more sense to have Exchange forward the mail and dump the VM.
    ¯\_(ツ)_/¯

Maybe you are looking for