Printer turns on with computer turn on , starts printing

Photosmart 7850. Had to do a reinstall WinXP and reinstall printer. Now when I start the computer, the printer starts and prints a few pages, one short line only with this sequence: USBC{happyface symbol}$C
I have removed printer and reinstalled software including drivers several times. I have checked and noted no items in queue. It will print at least 4 pages with similar line. Any ideas? Thanks.

Hello everyone,
I think I might have the same problem. When I open my Powerbook the backlight will turn on for about a second and then turn off. Nothing seemed to help it, it would just return randomly after restarting, letting it rest for a while, plugging into external monitor. I took it to a genuis bar last year and they couldn't figure it out and wanted to send the hard drive to be reformatted. I couldn't part with it so I kept it with the problems.
I figured out that when it's plugged into a power supply it is more likely to shut off. But other than that, I have no idea what it is, and at times it is still random. Does the power supply have anything to do with the inverter board? Sorry for my ignorance, I am not tech savvy.
Any ideas?

Similar Messages

I bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again

i bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again
please answer me as soon as possible

Hello Ahmedabokamar,
Thanks for the question! I'd recommend taking a look at the following article for troubleshooting steps that can help get your iPhone working again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

HT2074 i will want sync contact in mac book air with blackberry when sync started in contact i see massage in contact you must turn on sync service but i don now ?

will want sync contact in mac book air with blackberry when sync started in contact i see massage in contact you must turn on sync service but i don now ?
who can i sync a contcats white mac book to blackberry ?

Blackberry must update their software to work with Mavericks.

My computer does not start . It shows an envelope with a question mark. Can anyone tell me what to do?

My computer does not start I turn it on and it shows an envelope with a question mark.
Can anyone tell me how to fix it.

Troubleshooting: My computer won't turn on
Mac doesn't boot

HELP! Battery drained and now, even with a power plug, computer won't start

My battery drained completely...and I went to charge it. When I plug the power cord in, it shows "green" not "red." When I remove the battery and just plug in the power cord, the computer won't start either.
Anyone encounter this before after a full battery drain? It's very odd.

I had the same green light non-charging problem. Turns out, I had to replace my wall adaptor. A dealer will have a good power supply you can try.
Wayne

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

See also https://forums.adobe.com/thread/1654402

My computer will not start up. It powers up I get the gray screen with the apple and get the loading progress bar it loads to 25% and the screen goes black

My computer will not start up. It powers up, I get the gray screen with the apple, then the loading progress bar starts loading to about 25% the the screen goes black. what can I try to get my computer up and running?

Carolyn Samit wrote:
iMac, Mac OS X (10.7.1)
Use Command + R for Lion Recovery
Try restarting, when you hear the startup tone hold down the Option key. Then choose the Recovery Partition.

What does a file folder with a question mark in it mean when the computer won't start?

What does a file folder with a question mark in it mean when the computer won't start?

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(68976)

I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?

I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?

Here is some information and troubleshooting steps from Apple:
http://support.apple.com/kb/TS1440

HT1883 I am trying to run a hardware test. The Computer will not start with the "D" key held?

I am trying to run a hardware test. The Computer will not start with the "D" key held?

If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510

Computer won't start with 4 GB upgrade

I recently purchased a 4GB upgrade kit for my iMac (24") that had 1 GB. When I installed both new 2GB modules the computer would not start up. When I installed only 1 of the new modules (it didn't matter which one or in what slot) with the original 1 GB module everything worked fine. The computer was showing the 3 GB of memory. Any ideas why the 2 will not work. The modules are Memory Master 2GB PC2-5300 DDR2 which I purchased through Best Buy.

not sure if this will solve your problem but you can try..
look at the battery exchange program if your battery is eligable for the replacement or take it to the local dealer so they can check if your board sound is ok.
PowerBook G4 Mac OS X (10.3.9)

Computer won't start up with Apple Install disk

Hey Guys,
My computer is running slow so I ran Disk Utility to see if my disk needs repair. It does but my computer will not start up with the Mac OS X Install DVD. It just hangs. It will start up with the normal system. If I start up holding the "option" key, it gives me the choice to startup with the Mac HD or Start Up disk. When I select Start Up Disk, it doesn't do anything other than the button changing color when I click on it. Nothing else happens. What's up?

I think there is a fail in the Mac Os x install dvd. Have you tried the disc in Mac Os X to check if its allright..?

The computer I originally started using iTunes on a few years ago is no longer functional. How do I make the same library appear on my new computer with the newest iTunes?

The computer I originally started using iTunes on a few years ago is no longer usable, but for some reason some of the songs I have now are not showing up in my library on the new laptop I just bought. How do I consolidate the total songs on my iPhone to include them all in a new library on my iTunes in this new laptop? And why isn't this new laptop letting me update to ios 6 without deleting everything on my phone?

Your music will ONLY be where you put it.
It will not magically appear anywhere.
You buy one and only one download. it is your responsibility to move/copy/backup your music.
You need to copy everything from your old computer, or your backup copy of your old computer, to your new one.
Leaving your e-mail address on a public forum may not be wise.

Computer won't start up after 10.5.1 update

My leopard updates were a little rocky, but I got everything working eventually. However, after installing the 10.5.1 update yesterday, my computer no longer starts up properly. It hangs up for a VERY long time on the initial screen with the gray apple and little spinning symbol. Sometimes it eventually continues on to the logon screen, other times I get sick of waiting (literally 10 minutes) and do a hard reset. This only became a problem after the 10.5.1 update, and has been a problem every start up since then. I'm considering trying to roll back to 10.5.0 using my Time Machine backups, but thought I would check here first to see whether anyone has had similar problems (or even better, anyone has ideas about what's causing this and how to fix it). This is on my PowerMac G5 Dual 2ghz.
Thanks.

Zapping Pram didn't help, but probably wasn't a bad thing to do anyway. Another solution I've seen on another post is to start up while holding shift. This also didn't help. I have no external drives turned on, but I do have an 2nd internal drive. I've found a VERY STRANGE way to get it started: if I immediately open the CD/DVD tray while booting up, put the Leopard install disc in (probably any disc would work), and then wait till the computer gets stuck at the gray apple screen before closing the disc tray, it seems to continue starting up fine after closing the tray. Just having the disc in the drive doesn't help unless the tray is open.

802.1x EAP-PEAPv0 (MSCHAPV2) with computer authentication

I am a network administrator at seven schools, and a few of these schools are now using 802.1x EAP-PEAPv0 (MSCHAPV2) with computer authentication only, for wireless security.
We are a mixture of 2008 and 2003 (Windows Domain) servers running IAS or NPS for RADIUS.
I push out the wireless client’s setting via group policy, and the clients are using WZC.
Every now and then, a client will be unable to authenticate/validate during the authentication phase.
Some clients this will never happen to and a few it will happen repeatedly.
To fix this I have to hard wire the computer and do a gpupdate, even though the computer already had the updates applied previously, and is still part of the domain.
Many of our classrooms lack network drops, so wireless is the best for us.
Except for this one downfall, it is working great. Any help is appreciated.

Hi Ryan,
Thanks for posting here.
Could you discuss the situation that you mentioned “a client will be unable to authenticate/validate during the authentication phase.
Some clients this will never happen to and a few it will happen repeatedly. ”
in detail ? Can you verify if there is any error or warring that relate with this authentication issue recorded in event log on client and radius server ?
Only certain computers are facing this issue or all?
What’s OS running on these client computers?
According the situation right now , I’d like to share some suggections with you:
1. An 802.1x client may fail to connect to an Radius server if the Trusted Root CA certificate that issued the Radius server certificate is not installed on
the client computer. Either verify that the trusted root authority is installed on the client computer or disable certificate validation on the client. To disable certificate validation, access the properties of the connection, and on the Authentication tab,
click Properties. Click to clear the Validate server certificate check box. EAP-TLS requires the installation of a computer certificate on each RADIUS server and a computer or user certificate, or smart card on all clients. PEAP-MS-CHAPv2 requires the installation
of a computer certificate on each RADIUS server and the root CA certificates of the issuing CAs of the RADIUS server certificate on each of the client computers.
2. Verify that Radius is configured for the logging of rejected authentication attempts to the event log. Try the connection again, and then check the system
event log for an IAS event for the failed connection attempt. Use the information in the log to determine the reason the connection attempt was either rejected or discarded. Logging options are configured on the General tab of the Radius server Properties
dialog.
3. Any rejected or discarded connection attempt recorded should identify the Connection Request Policy used. A RADIUS request message is processed only if the
settings of the incoming RADIUS request message match at least one of the connection request policies. Examine the conditions of the policy identified to see where the request fails.
4. Determine from the IAS system event log entries whether the authentication failure is for computer auth, user auth, or both. By default, Windows performs
an 802.1x authentication with computer credentials before displaying the Windows logon screen. Another authentication with user credentials is performed after the user has logged on, and if this fails the machine will be disconnected from the network. Similarly,
if computer authentication fails but user auth is successful, symptoms will include failure to process login scripts or apply group policies and machine password expiration will not be updated since the user will only be able to logon with cached credentials.
If you use a smart card for authentication, you can only perform user authentication because smart card usage requires manual entry of a personal identification number (PIN). There is no way to provide the PIN to unlock the smart card certificate during computer
authentication.
5. Examine the wireless trace logs captured and search for keywords error, failed, failure, or rejected. This should give an indication as to what point in the
authentication process the failure occurs.
Meanwhile, I ‘d like suggest you may start troubleshooting with following the guides below and see if it will help:
Windows Server 2003 Wireless Troubleshooting
http://technet.microsoft.com/en-us/library/cc773359(WS.10).aspx
Troubleshooting Windows Vista 802.11 Wireless Connections
http://technet.microsoft.com/en-us/library/cc766215(WS.10).aspx
Thanks.
Tiger Li
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Random computers running Windows XP have this problem. It does not happen to all of them at once.
It is very random. A computer that has been connecting to the secure network for weeks will all of a sudden not be able to connect. The message is “attempting to authenticate” and it never makes the connection.
I checked if logging is turned on and I can see successful events from computers that are working.
I can also see failed events from computers that are not ours that tried to connect to our wireless.
However for the computers that are having this problem there are no logged events.
It is as if they don’t even communicate with the server.
Other clients on the same AP are working fine. I rebooted the IAS service, and RADIUS clients, but this did not help.
I also checked all the settings and they are correct, using PEAP, and validating the server certificate is disabled.
I did notice that the firewall is also turned on through group policy when the domain is not available.
Do you think the firewall is blocking the communication?
I added an exception to port 1812 UDP and this did not make a difference.

My mac desktop computer won't start and just beebs

My mac desktop computer won't start it just beens loudly. I don't have any lights showing on the keyboard but can hear the drive switching on. I have unplugged the computer, waited and replugged and waited and then turned it on again without and results. Please help.

Use this tip to identify your Mac:
https://discussions.apple.com/docs/DOC-6413
If indeed it has a PowerPC processor (the PowerMacs use that, and have been around since early 2006 simultaneously with some of the Intels), see this tip on beeps:
Power On Self-Test Beep Definition - Part 2
If it is Intel, see this tip:
Mac computers: About startup tones

Printer turns on with computer turn on , starts printing

Similar Messages

Maybe you are looking for