Printing does not go through

When I tried to print a document througn HP Officejet J6480 all-in-one printer, printer screen comes on. when I click "print", nothing happens. Need help.
Porus

Reset the printing system >  Mac OS X: How to reset the printing system
If that doesn't help, download and install new drivers for your HP model and v 10.6 > 
Software & driver downloads HP Officejet J6480 All-in-One Printer | HP® Support
Then open System Preferences > Print & Fax > Printing then click + to add the printer.

Similar Messages

  • New router, printer does not work

    A new wireless internet router and modem was installed yesterday. My printer does not respond from my MacBook Pro or my iPad. I followed all troubleshooting advice on HP and Apple websites. No luck. Apple support today suggested that my printer may need additional informatin which I cannot change. The Network ConfigurationCheck was perfect except for address changes and one other which may be significant. URLs for embedded web servers changed from http:/HP618550 to http://dhcppc2.
    The Wireless Network Test Results were perfect.  My computers acess the internet also without problems. Apple had me put a USB cable between the MacBook and the printer.  Then the printer worked just fine. He thought (not being a printer guru) that perhaps the communication between the router and printer was the problem. Hence I come to this site.  I have followed all HP site troubleshooting advice and met each criteria.  HELP?

    After reading this through again, I am wondering if the router is unable to support Bonjour properly.   Bonjour is the discovery service through which your Mac finds your printer on your network.
    Although not for your identical router, this article may be helpful: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02986958&cc=us&dlc=en&lc=en#N135
    If we can't get this resolved a for-sure, kill-it-dead solution is to get a normal, standard router (Linksys or Netgear) and put it in line with your ZyXel, disabling its wireless.  I can help if you want to go this way.  A good standard router would be $40 and you would be done.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
    Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed.  Sorry.
    You do have some options at this point.
    If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
    If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option.  However, it is my opinion that this money would be better spend being applied towards a new printer. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Airport extreme usb printer does not show on macbook

    I have been trying to set-up a printer on a Airport Extreme through the USB cable.  However, the printer does not show under "Printers and Scanners" and the help on-line has not helped at all. 

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • HP Photosmart 6510 e-All-in-One Printer Does Not Print Black Ink

    I have run all the troubleshooting listed from HP and the "check" warrenty doesn't come up blank.  I would like to not have to purchase a new printer to fix this any help would be greatly appreciated:
    1) Rebooted Printer
    2) Installed new printer cartridge (2nd one) - really not happy about this as that represents almost $50 in HP ink
    3) Checked venting - Not the problem
    4) From Tools ran head cleaner - still only prints colors (or grey)
    I've liked HP printers for a long time, but after reading the forums I'm really seeing an issue with the model I puchased.  I don't mind purchasing HP ink and my printer isn't a high volume use printer so I expect it to last beyond 1 year 1 day.
    I have the SN and product number available if a tech needs.
    Chris

    Hi @crfldf 
    Have you completed all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
    Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
    If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
    If I hear back from you and you require further assistance, I will send you a private message to gather some information. If I send you a message, you can click the little envelope on the top right hand corner of the forums page to check the message;
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • My HP wireless printer does not shpw up on my pc and iphone. Is you website nor working?

    Wireless Printer does not show up on the printing screen

    You might want to take a look at Printopia to see if it will do what you want. There is a free trial, so you will know for sure before you buy.
    The upside with Printopia is that printing from the iPhone will work just as if you had an AirPrint printer.
    The downside with Printopia is that you must have a Mac running on the network to be able to print.
    Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    I have no interest in Printopia other than that as a customer.

  • HP OFFICEJET PRO L7680 All-in-One PRINTER does not print yellow color at all

    Last week I understood that my Printer does not print at all yellow color.
    All other colors and tests I made are ok.
    I cleared printheads, made all printing tests, and diagnostic pages.
    In every printing was missing the yellow color..
    I changed the yellow catridge with another full one, and the problem persists..
    PLS could any body help me?
    Many tks
    antpep

    Welcome to the community @antpep
    I understand your Officejet Pro L7680 is no longer printing in yellow for you, and I'd like to offer my suggestion that may help you!
    Please click on the link below and try the steps in the guide.
    Fixing Print Quality Problems for the HP Officejet Pro L7500, L7600, and L7700 All-in-One Printer Se...
    If the yellow is still not printing for you and you reach the step to "replace the printhead", please consider contacting HP's technical support to see what your options may be with them in regards to a replacement part or unit.
    HP's contact info:
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
    Have a wonderful weekend ahead and thank you for posting in the community
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP 932C PRINTER DOES NOT WORK OVER A NETWORK WITH TWO DIFFERENT OPERATIONAL SYSTEMS.

    I have a 932c HP printer connected via USB to a Windows XP desktop computer (Dell E520), which is part of a home network.
    I also have an HP Pavilion dv5 notebook, running Windows Vista Home Premium 64-bit, connected to the same network. This notebook can find the printer over the network. However, when I try to capture the 932c printer, the following dialog box appears:
    "The server for the `hp deskjet 930c series` printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator or original equipmente manufacturer for the correct printer driver."
    When I click OK, another dialog box appears:
    "The file `*.INF`on (Unknown) is needed. Type the path where the file is located, and then click OK."
    However, I can't find any workable *.inf file in the HP notebook Hard drive (both partitions).
    I have already tried to download the driver from the HP website, but it says that Windows Vista already has the driver for such printer! Well, now I'm stucked!
    I'd like to point out that the printer works fine if I plug it directly to the HP notebook's USB port. But I want to operate the printer via the home network, keeping it hooked to the Windows XP desktop computer.
    How to solve this problem? Thanks.

    This is the HP notebook forums. I would recommend posting this in the printer forums for better coverage.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

    HP Color LaserJet CP2025  / Windows 7(64bit)-Why the printer does not print color letters??

    Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

  • Printer does not show in Rendezvous in Preinter Setup Utility

    I am using a G4 Ti 15" laptop usually connected wirelessly to an AirPort Extreme BS. Also connected to that BS is a desktop (ethernet), cable modem, and a HP LaserJet 2200 printer. If I connected the printer directly to the laptop, it prints. However, if I try to print wirelessly, it doed not work. In the Printer Setup Utility when I try to add a printer and select Rendezvous, the printer does not showup in the available list.

    Erven,
    Have you followed these instructions from the help pages of Printer Setup Utility?
    Connecting to a network printer
    If your computer is connected to a network, you can use the printers in your local area, including those that use Bonjour (formerly Rendezvous), AppleTalk, and OpenDirectory.
    Open a document to print, and then choose File > Print.
    Choose Add Printer from the Printer pop-up menu, select the printer in the dialog that appears, and then click Add.
    The dialog lists shared, Bonjour, AppleTalk, and Open Directory printers. You may need to wait a short while before your printer appears.
    If you don't see your printer, click More Printers, choose your printer's type from the pop-up menu in the dialog that appears, select the printer, and then click Add.
    If the specific type of printer you're using is listed, choose that type. For example, if you're using an Epson AppleTalk printer, you may be able to choose Epson AppleTalk.
    If you choose AppleTalk, another pop-up menu appears that lets you choose the AppleTalk zone for the printer.
    When you select your printer in the Add Printer or More Printers dialog, Mac OS X finds the printer's driver and adds the printer to the Printer pop-up menu. If Mac OS X cannot the printer driver, "Driver not Installed" or "Gimp-print" appears in the model pop-up menu.
    If you still cannot find the printer, it may be an IP printer, and you will need to follow the instructions for how to set up an IP printer.
    Usually, your computer can detect whether a printer has special accessories installed, such as additional paper trays, extra memory, or a duplex unit. If it can't, a dialog appears that lets you specify them. Make sure the settings in that dialog accurately reflect your printer's installed accessories so you can take full advantage of them.
    See also
    Connecting to an IP Printing network printer
    I can't print to a network printer
    Good Luck
    SF

  • Problem with wifi roaming - printer does not join SSID

    In WiFi network with 2 APs with same SSID and security setup (WPA2) working well in roaming for PCs,
    samrtphone and MacBook HP printer does not join WLAN and wireless test page from the printer shows as reason that priner see more then one AccessPoint with same SSID. 
    Product name HP Deskjet 3070 All-in-One Printer - B611a
    Model CQ191B
    Serial CN192332K805MQ
    Service ID 22114
    Firmware version MUM1FN1117BR    
    Region Europe

    Assuming that one of the APs runs DHCP and that the other is bridged, turn the briged AP off.  Now, connect the printer to the other AP, even if you have to move the printer.
    Once the printer is connected it should work fine once you turn the second AP back on.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printer does not print. Even the test page did not print. I put in a new cartridge.

    Printer doesn't print.

    adnerb wrote:
    My printer does not print the computer screen says scanner failure. I have a HP Officejet 5610v All-in-One printer. The printer is connected with USB.  The operating system is Windows Vista.  Help!!
    See the troubleshooting steps in this page.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Image Processor does not start through Bridge CS5

    Image Processor does not start through Bridge CS5, it starts only PS and nothing happen. I do not know, how to repair it.

    Most likely you do not have the startup files checked.
    In Bridge go to edit/preferences/startup scripts.  Make sure you have a check mark for Bridge and Photoshop.  Without that they can't talk to each other.

  • Acrobat 7.0 Pro pdf printer does not populate? Error says printer port.

    I got a new computer and was installing Creative Suite & Acrobat pro and the Adobe PDF printer does not show up in the Printers. I downloaded the upgrade and Windows says it cannot install.
    I am running Windows 7 Pro

    Two parts of AA 7 will not install on Win 7 (32 or 64-bit): the Adobe PDF printer and AcroTray.exe. You can install a separate color PS printer (either one from Adobe or possibly one for an HP color PS printer), change the name to Adobe PDF and change the port to FILE. That should do the job, but you will ALWAYS have an extra step in the creation of a PDF. You will have to print to the printer and a PS file will be created (probably with a PRN extension). You then have to open that file in Distiller to create a PDF. From my brief testing, this process will work and the rest of Acrobat and Distiller seem to work (though I did not test extensively). If this is unacceptable to you, then purchase AA XI (upgrade not available from AA 7).

Maybe you are looking for