Printing format problem from Linux GUI

Hi!
We have configured Printer for Linux Clients with "U" access method and users are able to take print out through Linux GUI. However, the printout is not in desired format. For example, PO printout has rows, columns, lines, borders, etc. which are printed correctly through Windows Printer. But when we take printout from Linux, lines, borders, logos, etc. are not printed, and only raw printout is fired.
I believe some ABAP development has to be done. Can anybody help in this regard please.
Regards,
Pankaj

hi pranav,
ABAP-ers usually create those program (smartforms or ALV list) using SAPGUI for Windows so if you switch print them using SAPGUI for Java it's going to be different either print out nor print preview.
I used different technique so that my Linux client can print program (that had been created using SAPGUI for Windows) without changing any code on the program.
ardhian
http://sapbasis.wordpress.com

Similar Messages

Printing formatted text from an Oracle form

I'm trying to print formatted text from an Oracle form without using the standard menu print. The print button on the menu prints out the text and the actual form. I just want to print the text that is displayed on the form. I would like to add a print button to the form. Is there a print function or event in PL/SQL?
Thanks in advance for any help!!
Jason

If you are interested in the content of the field you can loop over them (next_item built in) and write their content into a file using the TEXT_IO built in.
for nicer outputs check out Oracle Reports on OTN.

Pre Printed Format Problem.

Hi, Experts.
My Client Have Pre Printed Formats so i designed PLDS In
PLD When I am Increasing Height Of The Page Header at this
time Page Footer Data Base Fields are changing there Size.
Similarly Page Footer also.
When we are Desiging For Pre Printed Formats What is the
Important things we have to Do ? We are Using DOt Matrix
Printer in this we have setting for Page Formats and Instially I
measure Existing Pre printed format then i conver it to Points
Bsed on this Points i created Layout here also iam not able to
get exactly in that fileds.
When we are using Pre Printed Formats intially what we have
to do ? I set
Printer :Epson LQ -1050+
Page Format:FanFold 8.5*12in
Margins
Left:20
Right 20
Bottom:10
Upper:10
I choose Grid -> Format:Contious Line
Size 10
were i need to set alignments ?
regds,
sampth.

Hi
When using a Dot Matrix printer you should follow the steps from the SAP Note 724904 that helps you with the paper size.
The Dot Matrix printer you are using is not supported so you may getting it working now, but may stop working in future patches or version as the application is not ready to work with this printer.
Those are the support printers
https://service.sap.com/smb/sbo/documentation -> SAP Business One 2005A
SP01 -> Solution Operations Guides: DB2, SQL, SQL2005, Sybase .
- Citizen PROdot 300
- Epson FX-880
- OKI MICROLINE 320 Elite
- Epson FX-890 (SAP Note 1064382)
Paulo Calado
SAP Business One Forums Team

File Upload Problem from Linux to Windows and Windows to Linux

Hi,
I am a newbie in the flex environment.
I have faced a problem for file upload from linux to windows and windows to linux
And I have put crossdomain.xml file in root folder, still this problem is appear.
Please help me, if anybody know the answer.
Thanks and Regards,
Senthil KUmar

Hi Pauley,
I thought you are moving from unix to windows. Now I got it.
Make sure that the folder is shared and have necessary permissions. Please see few suggestions here:
Re: NFS or FTP for file on Ip 10.x.y.z
Regards,
---Satish

SSRS 2008 R2 why Link Report Print format different from parent?

Hi,
I have created a link report based on Report A.
In Report A I have set the print format to "LANDSCAPE", but the link report always appear in Portrait, any work around on this?
If this is one of the SSRS bugs, is that anyway I can disable the print button in Report Server?
Thanks

Hi SAMSUNG,
I can reproduce the issue in my local environment. As per my understanding, this scenario is caused by design.
In Reporting Services, Report server administrators have the option of disabling the print feature by setting the report server system property EnableClientPrinting to false. But this property will disable client-side printing for all reports managed by
the server. So if you want to hide the print icon in all reports, we can refer to the following document:
http://msdn.microsoft.com/en-us/library/ms155874(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot connect to printer over network from Linux

When I run hp-setup, I can get the printer listed but it appears to refuse to communicate with the device. Same problem for wired ethernet as well as wireless.
Please help, I think I have tried everything by now...
Firewall disabled on the workstation does not help. Talking to the printers web interface (:8080) works perfectly. The printer works perfectly via USB. Also works fine from another windows PC (networked)
System:
Linux Mint 17 - X86_64 (up to date)
uninstalled the mint hplip package and installed the latest from HP manually....
hp-setup
HP Linux Imaging and Printing System (ver. 3.14.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching... (bus=usb, search=(None), desc=0)
error: No devices found on bus: usb
Searching... (bus=net, timeout=5, ttl=4, search=(None) desc=0, method=slp)
error: Unable to communicate with device (code=12): hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
error: Unable to communicate with the device. Please check the device and try again.
Done.
hp-doctor output:
> hp-doctor
HP Linux Imaging and Printing System (ver. 3.14.10)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Checking for Deprecated items....
No Deprecated items are found
Checking for HPLIP updates....
Latest version of HPLIP is already installed.
Checking for Dependencies....
| SYSTEM INFO |
Kernel: 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 GNU/Linux
Host: stargate
Proc: 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 GNU/Linux
Distribution: linuxmint 17
Bitness: 64 bit
| HPLIP CONFIGURATION |
HPLIP-Version: HPLIP 3.14.10
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for linuxmint distro 17 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.14.10
html=/usr/share/doc/hplip-3.14.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.14.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 12/29/2014 22:32:01
version = 3.14.10
[upgrade]
notify_upgrade = true
last_upgraded_time = 1419919247
pending_upgrade_time = 0
latest_available_version = 3.14.10
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32"
printer_name =
working_dir = .
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
| External Dependencies |
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
gs Ghostscript REQUIRED 7.05 9.10 OK -
network Network-wget OPTIONAL - 1.15 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.6.18 OK -
cups CUPS REQUIRED 1.1 1.7.2 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
| General Dependencies |
reportlab Python-PDF-Lib OPTIONAL 2.0 3.0 OK -
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.10.4 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.19 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 2.7.6 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.10.4 OK -
cups-devel CUPS-SDK REQUIRED - 1.7.2 OK -
sane-devel SANE-SDK REQUIRED - 1.0.23 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.23 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.7.2 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
| Compile Time Dependencies |
gcc gcc-Compiler REQUIRED - 4.8.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 3.81 OK -
| Python Extentions |
cupsext CUPS-Extension REQUIRED - 3.14.10 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.10 OK -
hpmudext IO-Extension REQUIRED - 3.14.10 OK -
| Scan Configuration |
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.10 OK -
| DISCOVERED SCANNER DEVICES |
device `hpaio:/net/HP_Officejet_Pro_8620?ip=192.168.1.32' is a Hewlett-Packard HP_Officejet_Pro_8620 all-in-one
device `hpaio:/net/Officejet_Pro_L7600?ip=192.168.1.31' is a Hewlett-Packard Officejet_Pro_L7600 all-in-one
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
HP_Officejet_Pro_8620
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
PPD: /etc/cups/ppd/HP_Officejet_Pro_8620.ppd
PPD Description: HP Officejet Pro 8620, hpcups 3.14.10
Printer status: printer HP_Officejet_Pro_8620 is idle. enabled since Mon 29 Dec 2014 10:06:03 PM PST
error: Unable to communicate with device (code=12): hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
error: unable to open channel
error: Communication status: Failed
HP_Officejet_Pro_8620_fax
Type: Fax
Device URI: hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
PPD: /etc/cups/ppd/HP_Officejet_Pro_8620_fax.ppd
PPD Description: HP Fax4 hpcups
Printer Backend /usr/lib/cups/backend/hpfax does not exist! enabled since Mon 29 Dec 2014 10:06:03 PM PST
error: Unable to communicate with device (code=12): hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
error: unable to open channel
error: Communication status: Failed
Officejet_Pro_L7600_2
Type: Printer
Device URI: hp:/net/Officejet_Pro_L7600?ip=192.168.1.31
PPD: /etc/cups/ppd/Officejet_Pro_L7600_2.ppd
PPD Description: HP Officejet Pro l7600, hpcups 3.14.3
Printer Backend /usr/lib/cups/backend/hp does not exist!ince Sun 28 Dec 2014 10:55:35 AM PST -
Communication status: Good
Officejet_Pro_L7600_fax_2
Type: Fax
Device URI: hpfax:/net/Officejet_Pro_L7600?ip=192.168.1.31
PPD: /etc/cups/ppd/Officejet_Pro_L7600_fax_2.ppd
PPD Description: HP Fax hpcups
Printer Backend /usr/lib/cups/backend/hpfax does not exist!since Mon 10 Nov 2014 10:22:10 AM PST -
Communication status: Good
| PERMISSION |
Checking Permissions....
Permissions are correct.
Checking for Configured Queues....
Queue(s) configured correctly using HPLIP.
Checking for HP Properitery Plugin's....
No plug-in printers are configured.
Checking for Printer Status....
error: 'HP_Officejet_Pro_8620_fax' Printer is either Powered-OFF or Failed to communicate.
Turn On Printer and re-run hp-doctor
error: 'HP_Officejet_Pro_8620' Printer is either Powered-OFF or Failed to communicate.
Turn On Printer and re-run hp-doctor
Diagnose completed...

Syslog......
Dec 30 11:02:20 stargate hp-systray: io/hpmud/jd.c 93: unable to read device-id
Dec 30 11:02:20 stargate hp-systray: [29791]: error: Unable to communicate with device (code=12): hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
Dec 30 11:02:20 stargate hp-systray: hp-systray(hpdio)[29793]: error: Device not found
Dec 30 11:02:24 stargate hp-systray: io/hpmud/jd.c 93: unable to read device-id
Dec 30 11:02:24 stargate hp-systray: [29791]: error: Unable to communicate with device (code=12): hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
Dec 30 11:02:24 stargate hp-systray: hp-systray(hpdio)[29793]: error: Device not found
Dec 30 11:02:29 stargate python: io/hpmud/jd.c 93: unable to read device-id
Dec 30 11:02:29 stargate hp-toolbox: [30057]: error: Unable to communicate with device (code=12): hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32
Dec 30 11:02:29 stargate hp-toolbox: hp-toolbox(UI)[30057]: error: Unable to open device hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32.
Dec 30 11:03:03 stargate python: io/hpmud/jd.c 93: unable to read device-id
Dec 30 11:03:03 stargate hp-check: [30059]: error: Unable to communicate with device (code=12): hp:/net/HP_Officejet_Pro_8620?ip=192.168.1.32

EPSON LQ - 2180 ESC/P2 : print setting problem from SAP b1 8.8 PL 19

Hi All,
we are SAP Business One Customer, I have created Crystal Report and using Printer : 'EPSON LQ - 2180 ESC/P2',
I have selected Same Printer in Printer Option
Orientation is 'Portrait'
Paper Size 'US Std Fanfold'
but print out comes in Vertical Format, we want to print it in Horizontal format
I Tried many times in Landscape and Portrait format but print comes in Vertical format.
I have checked some following conditions:
1. If printer is in 'Portrait' format then test print is OK..
2. If Crystal Report is in 'Portrait' format then test print is OK..... directly print from Crystal Report
3. whenever I take print out from SAP B1 for same Crystal Report with same setting but print comes in vertical format.
I am attaching Print Setup screen print with this mail, pls kindly find the attachment.
Pls give me feasible Solution as soon as possible.
Thanking you in an obligation.
Regards,
Babu Terve

hi Datta,
when you say S-Account, this account is needed when we use the SAP Portal. Contact your SAP Partner to get your S-Account. regarding the note i will quote it here
1535606 - Printer preference setting for the Crystal Layouts
Symptom
Print Crystal Report layout does not consider Business One (B1) printer preferences changed by user before printing.
In order to enable B1 to make print preferences changes in application the Crystal Report Layout must have ticked off the "Dissociate Formatting page Size and Printer Paper Size" option in page setup.
The following preferences are enabled for the Crystal Reports Layouts:
1. Orientation: "Portrait" or "Landscape".
Note! In case the report is too wide to fit on rotated page, error message is returned.
2. Document Options: Duplex printing (Print on both sides).
3. Paper Options: Paper size.
Note! The options Custom Size will not be considered by B1.
Note! In case it is not possible to print on some paper size error message is returned.
4. Paper/Quality: Print Quality/Printer Resolution, Paper Source.
5. Color Options.
Note! Crystal does not resize the report to fit the selected paper or format.
Cause
Application error
Solution
As a workaround, please change the Page Setup to Landscape in Crystal
Report designer itself.
SAP intends to provide a patch or patches in order to solve the problem
described. The section Reference to Related Notes below will list the
specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number. Please note that these references can only be set at patch
release date. SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
Other terms
Print Setup, print preference
Header Data
Released on     06.12.2010 15:05:56
Release status     Released for Customer
Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
Other Components
SBO-GEN-PRT Printing Issues
Priority     Correction with medium priority
Category     Program error
References
This document refers to:
SAP Business One Notes
1540128           Overview Note for SAP Business One 8.8 Patch 18
This document is referenced by:
SAP Business One Notes
1540128           Overview Note for SAP Business One 8.8 Patch 18
Validity
Software Component
Version
SAP BUSINESS ONE
8.8
regards,
Fidel

Sapscript Standard Text Printing - Format Problem

Heros,
I wanted to print one standard text(Basic Text of Process order) in sapscript.I am using the INCLUDE command instead of Read_text FM , so that I can keep the Paragraphs of that text intact.But I am falling short of two requirements of my client.
1. He has highlighted Some words of the text and underlined some of the text. He wants that character format intact in spascript.How can I do that?
2. The script initaly was using Read_Text and was storing the value in a variable wa_line and was printing in script as
[LI ] DESCRIPTION: &wa_line&
so it was printing like
DESCRIPTION: fasfoihfaishfiahfiafhfihfahfiashfiahfahfiafiasfihahfisahfafasi
But now I am using INCLUDE command as follows
[LI] DESCRIPTION:
[: /] INCLUDE OBJECT BLAH BLAH
So it is printing like
DESCRIPTION:
fasfoihf
aishfiahfiafhfihfa
hfiashfiahfa
hfiafiasfihahfisahfafasi
I want to get them in same line.
I mean
DESCRIPTION: fasfoihf
aishfiahfiafhfihfa
hfiashfiahfa
hfiafiasfihahfisahfafasi
Is that possible?
Reward Point Guranteed.

Hi Anid,
When you are creating your standard text the default value in the tag column is *. If you change this value to = (Extended line) the display of standard text will start in the same line as the previous value (in your case it will display the standard text in the same line as DESCRIPTION:).
Hope this solves your problem!
Regards,
Saurabh

Discoverer Plus Business Intelligence Print Format Problems

I am having a problem with setting the print settings to landscape. Under page setup before printing i set the Orientation to Landscape. The worksheet is printed in a landscape format, but the margins only go halfway across the page (under print preview the report fits on one page). It seems as if the program is taking the potrait orientation and just printing an image of the potrait printout in landscape. Does anyone know what the problem is? Thanks!

Hi
Discoverer Viewer is licensed the same as Discoverer Plus. If you have 1 Plus user and 20 Viewer users you need to be licensed for 21 users.
You can either buy named users or you can buy an unlimited license. The cutover point is 25 users becauses the last time I looked I believe the per user price was $800 and the perpetual was $20,000 per CPU.
The minimum purchase for named users is 5 so are you absolutely certain that 1 license you have isn't a perpetual license or even perhaps a Discoverer Admin license?
You should discuss this with your Oracle sales rep who may well be able to get you a better price.
Best wishes
Michael

Print Formatting Problem On Specific Printers

When printing an ABAP list in LOCL mode, on certain printers the grayscale backgrounds of fields print as slashes ////// and others print as crosshatched.
For example, on a Canon 2200 printer,
this code prints as crosshatched background behind the text:
      WRITE: / 'INSTALLATION:',
      15 GSTR_REP-ANLAGE COLOR 6 INVERSE ON.
This code prints as slashes in background, behind the text:
      FORMAT COLOR 5.
      WRITE 'Write some text'.
      FORMAT COLOR OFF.
On an HP 8150 printer, the same report prints a grayscale background for the color 5 example, and a plain background for the color 6 example. It does not matter which output device is chosen, the output is the same.
Any ideas on how to resolve this, so the report prints the same way on all printers?
Thanks

It really all depends on the printer drivers being used for each model of printer. I would say that if you want all the printers to print the same, buy all they printer model. I know that this is not realistic, but I think that you are stuck with what ya got. I don't know if changing the print device attributes at the OS level of SAP will help or not.
Regards,
Rich Heilman

Print format problem in report

I have a tabular reports with several repeating frames.For each record of the outer repeating frame, I have multiple records in the inner repeating frame. My problem is if the inner repeating frame cannot fit within a page , it does not overflow to the next page but the record is truncated. I have a summary column in the outer frame based on the inner frame values. Sometimes I see this summarised results but no record is display from the inner repeating frame. I hope someone can visualise this and come up with a solution. I had wanted to paste the layout on the blog but to no avail. Thanks for your help.

while defining filed catalog define the data type also
clear l_fieldcat.
l_fieldcat-fieldname = 'MEINS'.
l_fieldcat-datatype = 'UNIT'.
l_fieldcat-no_out = ' '.
l_fieldcat-do_sum = 'X'.
l_fieldcat-seltext_l = 'UOM'.
append l_fieldcat to p_fieldtab.
may be it would help.
anya

How do I set up my server to print PDF's from Linux LPD?

Our company software runs on a Linux server, in which we have set up multiple LPD queues, one for each location. Currently, we have a windows 2003 server with Anzio Print Wizard capturing the data and printing it to PDF and placing it in specific folders (i.e. "store1","store2","store3",etc.) on our file server (the Mac) according to the printer queue (i.e. "lppdf1","lppdf2",etc.) chosen in the software. I want to get rid of the **** windows server and move everything over to the Mac. This is the last service that we have to move over.
I have read the Print Server Admin guide and found nothing that would guide me in the right direction. That, or I don't know what I am looking for. lol.
Can someone offer some guidance, software solution, direction, etc.. to help me get this over to the Mac server?

Bump.. anyone?

RMAN exit problem from linux script..

Hi all
I am using 11.1.6.0 on linux centos ..below is the rman script (name is rmanbackup.sh) .
rman target / <<- EOF
sql 'alter system archive log current';
run {
backup current controlfile;
exit
EOF
echo "script complete for rman backup"
mkdir /home/oracle/backup_dir
cp /home/oracle/backup_dir /home/oracle/backup_dir1
when i execute this, rman exit from script without executing the last 3 operating system commands .
any help in this regard.

As Mseberg said, Please try to mark you questions as answered, here is the answer:
add *#!/bin/ksh* in your script ; also cp -r not cp
[oracle@wissem ~]$ cat rmanbackup.sh
#!/bin/ksh
rman target / <<- EOF
sql 'alter system archive log current';
run {
backup current controlfile;
exit
EOF
echo "script complete for rman backup"
mkdir /home/oracle/backup_dir
cp -r /home/oracle/backup_dir /home/oracle/backup_dir1
[oracle@wissem ~]$ ./rmanbackup.sh
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Aug 28 17:00:11 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORAWISSE (DBID=3964208472)
RMAN>
using target database control file instead of recovery catalog
sql statement: alter system archive log current
RMAN> 2> 3>
Starting backup at 28-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=149 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
channel ORA_DISK_1: starting piece 1 at 28-AUG-11
channel ORA_DISK_1: finished piece 1 at 28-AUG-11
piece handle=/home/oracle/app/oracle/flash_recovery_area/ORAWISSE/backupset/2011_08_28/o1_mf_ncnnf_TAG20110828T170014_75np001q_.bkp tag=TAG20110828T170014 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 28-AUG-11
RMAN>
Recovery Manager complete.
script complete for rman backup
[oracle@wissem ~]$ ls -rtl /home/oracle/backup_dir
total 0
[oracle@wissem ~]$ ls -rtl /home/oracle/backup_dir1/
total 4
drwxr-xr-x 2 oracle oinstall 4096 Aug 28 17:00 backup_dir
[oracle@wissem ~]$ ls -rtl /home/oracle/backup_dir1/backup_dir/
total 0
[oracle@wissem ~]$

Problem while printing from SAP GUI for HTML

Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
Reena

Hi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal

Problem Printing to Large Format Printers From SGD

I am having a problem printing to large format printers when using the PDF printing option for SGD. The SDG Universal PDF Viewer recognizes the print format that I specify but on the client device side the pdf that is produced is always Letter size. If a larger format is speciied the client side pdf displays a small portion of it - almost as if it were clipped at the Letter size. Has anyone experienced this. Is it an SGD problem per se or is it an issue with the Ghostscript configuration and if so is ther a way I can change the config?
I am running 4.6.2 in an RHEL5 environment. The application server I am primarily working with is Windows Server 2008. The printers I have tried to print larger formats to are HP CLJ 2800 PS (Tabloid size), HP Designjet Z6100 (E size), and HP DesignJet 4020ps(E size). In all cases the plot appears to have been clipped into a Letter size format on the client device side.
Thanks,
Edited by: Odog314 on Jul 12, 2012 3:15 PM

You may have encountered a limitation with the GARO driver, especially if it is connected to the USB port of the Express. We have an iPF8100 but it is connected directly to our network via Ethernet so I've never tested the printer via USB. But if the driver is anything like the consumer inkjet drivers, there is often issues with the driver determining the printer model on the end of the USB and this stops the printer queue creation.
Have you tried connecting the printer via Ethernet to the Express and then seeing if you can add the printer queue? You will have to set an IP address in the machine if DHCP is not enabled.
PaHu

Printing format problem from Linux GUI

Similar Messages

Maybe you are looking for