Printing issue through Jobs

Hi Experts,
I have a job rining to print the delivries and the Invoices, But while doing so it failed to print and the error message says there were no meesage for initial processing.
when executed the printing manually via VF31, all output got printed. I have checked the transaction but couldn't find out the reason on why this is happeing.Can you please find the cuase of this inconsistencies.
Please help me to know what would have been the problem in printing the Jobs
Thanks

Check the entries in the NAST table. This message means that either there is no entry in NAST (e.g. it was not created because of the missing condition record) or that the entry has already been processed (NAST-VSTAT <> 0).

Similar Messages

  • PDF Printing issue through Adobe

    When printing PDFs in landscape mode/duplexed open from top, the first page prints full size the remainder of the document prints 1/4 pages. Is this an adobe issue?  It has happened on numerous files. 

    What you are after is the Oracle XML Publisher Desktop.
    Goto :
    http://www.oracle.com/technology/software/products/publishing/index.html
    and download Oracle XML Publisher Desktop 5.6.2 for Microsoft Windows. It is 100Mb.
    It adds some buttons to MS Word.

  • Issue in Printing Smartforms through Dotmatrix Printer

    Hi,
    I have a Smartform which has many tables. When I print it through a Laser printer it comes out fine. But when I direct it through the Epson 2090 a 24 pin head dotmatrix printer some lines in the tables are not getting printed.
    May be it's that there is no room for printing line. What will be the best solution for this?, What's the best Font & Unit of Measure I should use? Or Anyother solution?
    Thanks,
    Kishan

    Hi,
    I have a very similar problem to the original posting.  I have a SAPScript form that print fine on a HP Laser Jet printer.  But we cannot get it to print correctly on a Epson DOT Matrix.  We tried two different models and get the same bad results.  The print size is smaller on  the DOT matrix even though I am using the following printer initialization
    # set  to 10 CPI
    0x1B0x50
    # select LQ quality
    0x1B0x780x01
    # select non-proportional spacing
    0x1B0x700x00
    # set left margin to 0
    0x1B0x6C0x00
    # set right margin to 85
    0x1B0x510x85
    # cancel bottom margin
    0x1B0x4F
    It is also printing a hex value on the first line and has top, side, and botton margins of about 3/8 inch  So apparently, it is ignoring the printer initialization.  Note, I had also tried the same initializations using \e in place of the Epson Escape hex value \0x1B
    Message was edited by: Bob Ackerman

  • Printing issues on network printer (Sharp MX-N700N)

    Hi all,
    Well my issue is twofold really. Primarily, I need to be able to print to a network printer which is the Sharp MX-M700N. Now it's on a windows network, so I added it to my printer list via it's IP address. So far so good...so now I have the latest driver avaialble from the Sharp consumer website (sharp-usa.com) and what happens is anytime I try to print anything, the job automatically goes on pause. Even if I click resume, it then pauses again immediately.
    Now the second part of my issue, is that other people in my office who are also on Macs running 10.5.2 have added this printer via it's IP, but they used an older driver (for version 10.4.x) that was downloaded off of the Sharp service site, accessible only by authorized technicians. Now here's the thing....they can print to it perfectly.
    So immediate thought is...use the driver they're using right? Well, when I try to install that driver, it's telling me it can't because a newer version is already installed. I've gone into Macintosh HD > Library > Printers to find the driver to try and delete it, but there's tons of stuff in the Sharp folder there and I'm worried about just randomly deleting files.
    Any help would be greatly appreciated! Thanks!

    Reading through your post, you may find that the latest driver you have will work, you just might have to ensure you have the correct protocol selected and queue name entered. If you look at one of the other Mac's that is working, you can select the print in the list, select 'Open Print Queue' and then select the Info icon. This will display the General tab and in the lower section next to URI will be the protocol and queue used; ex lpd://ip_address/print.
    If you do have the exact settings in your Mac, and you want to look at removing the driver, then check that an uninstaller is not included with the driver installer. I've seen with the Canon copier drivers, you have the option to Uninstall and this removes all the files located in /Library/Printers/Canon/PS. Hopefully you have something the same for the Sharp.
    If not, then copy the contents of the Sharp folder to another location and then delete the original folder contents.

  • PSE9 Photobook Printing Issues

    I recently created several photobook in PSE9 and printed them through Kodak Gallery.  The first two books printed with not issues.  However, in the third book one small portrait oriented photo was rotated to a landscape format in the printed book (the image is oriented correctly when viewed in PSE9 organizer and editor); I just let that go as a fluke.  However, in the fourth book, there were about 14 instances where a portrait oriented image was rotated to landscape in the printed version.
    Note, that I had created and printed about 20 photobooks in previous PSE verisions without this problem occuring.
    There was a "connection" issue with some of these recent books, as the images that were loaded into the photobook formats were moved from the local drive to an EHD after the books were created.  When I tried to print the books the first time, I got an error indicating that some images were not "connected" so I had to go through each page and replace the images so that there was a connection.  Not a big deal, but still this causes me some concern.
    I have contacted Kodak and their technician indicated that I was using their old website (he used the term "classic") and suggested using their new site.  Perhaps PSE9 is still connected to the old/classic site for Kodak Gallery?
    I am looking for options on how to ensure that the images that are loaded into the photobook file will be printed correctly.  Is is a layers issues (too many layers to be successfully uploaded to KG.com)?  Would flattening each page take care of he problem?  
    A more involved solution might be to create the photobook, then save each page as a jpg file, then create a new photobook where the only image on each page is the full size jpg version of that page (so the jpg is now "frozen" and there is no way to rotate an image within the page), then print this copy photobook (still a .pse project file, but now each psd file in the project only has one full-page jpg image).  A few extra steps, but perhaps this will esure a correct print job.  Do you see any problems with this approach.  It is a fix, but not a solutionto the underlying communication problem betweenn PSE9 and KG.com.
    Any suggestions will be greatly appreciated.  I have about 6 more photobooks in process and I would like to get a handle on this printing problem.
    Thanks,
    Allen

    @nico1301 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • HP Deskjet 1510 - Printing Issue

    Hi,
    Sorry if I have entered this in the wrong place but I am new to the forum.
    My father has purchased a new HP Deskjet 1510. He has a Toshiba Laptop running off Windows Vista 32-bit.
    I have used the installation CD provided to install and also downloaded the latest HP Drivers from the website as prompted.
    All appears to have installed correctly  and I am able to print all types of documents except word documents. (PDF's, Screengrabs, HTML pages etc.) When I print a word document, the printer goes through the motions but prints a blank page in the end.
    I am also able to copy & scan documents in both black & white and colour.
    I have tried various troubleshooting applications (HP Print & Scan Doctor, Windows Print Fix etc.) and all say that the printer and settings are all in working order.
    I have also removed and reinstalled the printer but the problem remains.
    I have also installed the printer on my own laptop (Dell Inspirion running off Windows 8) but the printing from word issue remains.
    I am at my wits end and would appreciate if someone could provide some assistance.
    Cheers.
    Mageegs

    Hi Mageegs,
    Welcome to the HP Forums!
    I understand that you can print all types of documents except for word documents with your HP Deskjet 1510, and I am happy to help you with this issue!
    Please take a look at this website. How to troubleshoot printing problems in Word.
    Otherwise, please contact Microsoft Support, since everything else is printing okay.
    Hope this helps you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • New airport extreme and printer issues

    OK here is the deal
    I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

    There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
    Sorry to be so vague, just thought it might be a start for you.

  • ORARRP doesn't print to a printer configured through TCP/IP.

    Could any one using ORARRP pls. help ? I am pasting the TAR contents I opened with Oracle Support.
    Oracle Support doesn't support ORARRP. They referred me back to discussion forum.
    Thanks,
    RK
    Resolution History
    22-MAY-02 19:25:05 GMT
    Can you easily recover from, bypass or work around the problem? = NO
    Does your system or application continue normally after the problem occurs? =
    YES
    Are the standard features of the system or application still available; is the
    loss of service minor? = YES
    ### Problem Description: ###
    I am using windows 2000. I found an article which said there is a new release
    of ORARRP for windows 2000. Can I obtain the latest release of ORARRP.exe ?.
    I am having trouble printing with ORARRP. I select the output file from the web
    by clicking it. and it opens the printer dialog.. I hit O.K and nothing is sent
    to the printer.
    Need help.
    ### Upgrade or New Install?:###
    Neither
    ### Error numbers/messages:###
    no error messages.
    ###Log files faxed/emailed or uploaded ###
    Uploaded
    ###Any workarounds ###
    none
    ###Name & Version Details ###
    none
    ### Were you able to complete this process previously? When? ###
    no
    ### Can you duplicate the issue? What is the navigation path? ###
    yes
    ###Is the problem in all environments? If not what's the difference?:###
    Not Sure. Need to check with some one else who uses windows 2000.
    ###Any patches applied recently?:###
    none
    Contact me via : E-mail -> [email protected]
    23-MAY-02 00:09:27 GMT
    Issue needs to be addressed with Oracle Reports Developer. XFR->TOOLSREP
    23-MAY-02 01:06:04 GMT
    New info : Hi Oracle Support,
    I found that the ORARRP works fine and submits report to the Printer if the
    printer is defined through Novell Netware Network.
    But if the same printer is defined through I.P address directly as a local
    Printer it doesn't work. ( Add new port , Standard TCP/IP port method in
    Windows 2000).
    Does it give us any clue to solve this issue ?.
    Pls. Help.
    Thanks,
    RK
    23-MAY-02 13:19:58 GMT
    Investigating this issue...
    23-MAY-02 13:32:25 GMT
    Hi,
    My understanding is that you where trying to print using ORARRP utility on the web
    Since you are trying on an muti-tiered server(that is web is 3-tier)
    by default this report will be printed out to the default printer assigned to
    the application server machine , NOT to the client machines default
    printer.
    For example,
    Machine 1 - the application server machine
    Machine 2 - the client machine
    Machine 2 submits a request to run a report to the multi-tier server with
    DESTYPE set to PRINTER; DESNAME is left blank.
    Printing will be on the default printer of Machine 1(Application server)
    and not on Machine 2(Client PC)
    If I am wrong inmy understanding, please eloborate
    Best rehards
    Chandru
    23-MAY-02 13:32:44 GMT
    Email Update button has been pressed -- Sending email.
    23-MAY-02 15:08:03 GMT
    New info : A Big No. We are running the 10.7 version of Oracle applications and
    there is no middle tier per se.
    All we have done is to define a new printer called "LOCAL_PRINTER" and when
    users select this printer the initiaization string which the Print command
    sends to the printer before sending the file gets added to the output file and
    the output file is stored in a directory which is accessible through a web
    server.
    Users invoke the browser and point to the website where the output files are
    avaiable. and then click on their request ids. Since the extension of the file
    is .rrpt the ORARRP utility brings the Printer dialog where we have select the
    printer.
    This setup was working sucessfully till so far. ( Past 1 year).
    Now it suddenly didn't work for a user's printer which was connected to her PC.
    Since I had windows 2000 on my laptop and I tried the same and found that the I
    select a PC which is defined through I.P Address then it is not working. But
    if I select the same printer defined through Novell Netware it is working.
    Please let me know if you are getting the picture. if not may be we can do a
    webex session or something like that.
    Thanks,
    RK
    916-630-3508
    23-MAY-02 15:51:40 GMT
    Hi,
    Sorry, I do not find any related notes on this issue
    Possibly the PDF by name orarrp1.3.4.pdf in the ZIP file [downloadale at http://otn.oracle.com/sample_code/products/reports/files/Orarrp_1_3_4.zip] could show some pointers on this issue.
    This PDF about this utility and is the only document I could find on this issue
    ORARRP is a sample supllied "AS IS" to customers and is currently not supported by Oracle Support
    Users facing any issues with this utility are encouraged to share their experiences in OTN forum at http://otn.oracle.com
    This forum is being monitored by Product Management who can help customers as well as provide fixes for this utility
    Please close the tar and post in OTN forum
    Thanks
    Chandru
    23-MAY-02 15:51:51 GMT
    Email Update button has been pressed -- Sending email.
    23-MAY-02 10:24:13 : CHANGES MADE VIA MetaLink
    NOT YET FORWARDED TO OUR INTERNAL SYSTEMS :
    Closed by customer
    Closing the TAR

    Hi Radhakrishnan,
    ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
    I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
    regards,
    Stewart

  • HP Officejet 4500 Wireless Printing Issues with Online Maps & Financial Institutions

    I have an HP Officejet 4500 Wireless printer that I have wireless connection to my HP G72 Laptop running Windows 7 (64 bit) with Internet Explorer 9.  I am having trouble printing online maps from either Bing Maps or Google Maps.  It seems the print jobs get stuck in the print que and always show an indefinite status of “Printing” in the que but never get printed.
    I’ve tested my other applications including Office 2010 and all other jobs seem to print just fine.  I do use the “Print” button located in each of the online Map sites (Bing, Google).  This is when the jobs get stuck.
    I do also have the HP Bing Bar installed with Smart Print.  The Smart Print feature seems to work with the online maps just fine (seems I’ll just use it instead).
    Another separate printing issue is that I can never get any of my online financial transactions to print from any of my online financial institutions with either the Internet 9 print features or the HP Bing Smart Print feature.  I can never get those to print (have to wait for the PDF statements to be available).
    Any ideas as to why I can print the maps or online financial transaction?  I get no error messages either.

     Hi,
    Please use the following tips/instructions to fix:
        http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Printing issues with HP 310a All in One Printer

    I have a new HP 310a.  Looks good, fast on text printing, but features such as merged envelopes and printing letters on A5 stationery do not print correctly; nor in correct order.  Photos print larger than they actually are and look like they need to be cropped.  Anyone experiencing the same?
    Photo tray has nothing to hold paper in place (except on sides); and when tray enters printer, the photo paper slips backwards and error message "out of paper" appears.
    This is the last time I will buy an HP product

    Hi there,
    Welcome to the HP Forums!
    I understand that your HP F380 has stopped printing in color, and I am happy to help you with this printing issue!
    For further assistance, I will need to know the following:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please take a look through this guide. Streaks or Lines in the Printed Image.
    Hope to hear from you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Printing issues in Windows 8.1

    Hello,
    I work for a company and we have a number of network printers shared, when we connect to a network printer it installs the driver and everything is fine and normally this is the end of it but recently I have one user who is having print issues. It seems
    as though every time he takes his laptop home and brings it back he is unable to print, the printers show offline or the job appears to print but never does. Today we got this error when attempting to print a test page " Test page failed to print. Would
    you like to view the printer TS for assistance? The server print spooler service is not running" which it was because I had stopped and started it several times already. Finally I was able to delete the network printers and reinstall them as a temporary
    fix but history has demonstrated that once he take this laptop home the problem will reoccur. I read and re-read most of the come close to describing my issue but not completely.
    Thanks,
    OSAMTEC

    every time he takes his laptop home and brings it back he is unable to print, the printers show offline or the job appears to print but never does.
    Could there be a naming conflict?
    Otherwise it looks as if there is a troubleshooter for printer and other loosely associated categories.  Have you tried them?
    BTW I'm curious if WMIC could be used here.  As I just mentioned in another incident these look interesting:
    C:\>wmic.exe /? | find /i "print"
    PRINTER                  - Printer device management.
    PRINTERCONFIG            - Printer device configuration management.
    PRINTJOB                 - Print job management.
    Good luck
    Robert Aldwinckle

  • HP OfficeJet 2544 Windows 8.1 Printing Issue

    Hi there,
    I am having a frustrating problem with my HP OfficeJet 2544.  It happens all the time if I want to print anything more than one or two pages, and it only happens to me on my Desktop PC (i.e. my wife's laptop doesn't experience the issue).
    What is happening is this:  I send a document (multiple pages) to the printer, and then after the first page or so, I get a Windows 8 error message popping up saying the document couldn't print.  The printer then spits out whichever page it is currently printing, usually half printed.  If I want to print a multi page document, I have to print it one page at a time.  I can't even send it to the printer in groups of 2 or 3 pages!
    The printer is connected wirelessly, but I don't think it is a wireless issue.  We have good strong signal in our house, and in any case, if it was a wireless connection issue my wife would have the same issue, which she does not.
    I thought there was some bug in my Windows 8.1 installation, so I did a clean reinstall.  This did not fix the issue.  I have also tried reinstalling the drivers (did not work either) and clearing out the Print Spooler folder (again, no luck).
    The only thing I can think of is that a while back the HP Update program said there was a Firmware update for the printer, which I installed.  But if this was the problem, I imagine it would be affecting my wife's Laptop too?
    I am getting fed up with the issue, and as I am doing a part-time degree I have to print multi-page documents from time to time!  Does anyone have any ideas?

    Hello @SamuelH82
    I have some ideas that come to mind when I read through your post about the printing issues you have solely from your computer, as the other computer works find with the printer.
    The printer hardware proves to test out alright, as the other computer does function fine with it.
    I would suggest first running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. This alone could help fix the problem.
    Also, try printing from other programs. Do they all appear to have the same problem?
    Disable any firewalls and anti-virus' temporarily. Try printing again to see if that helped.
    How far is the printer from your computer, and what are in between them that could cause interference? Having the computer and printer too close could cause disconnections.
    Let me know the results thus far and your findings.
    Enjoy the rest of your day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to re-run output determination after goods issue through idoc

    Hello,
    i've got a question about output determination. We are currently in a process to automate picking, packing and goods issue through a 3rd party software. The software creates DELVRY03-Idocs including picking, packing and goods issue-information. Picking, packing and goods issue work just find and after submitting the idoc, the delivery is updated as needed.
    The problem arises when it comes to printing the shipping document on the printer belonging to the picking station that just processed the delivery. To determine the correct printer, the external software includes the picking station number inside the idoc. A user exit in idoc_input_delivery puts the number (3 digits) into likp-traid. The customizing for using this field inside output determination is complete and seems to be working.
    The problem is: as the number of the picking station is not known before goods issue, the LD00 message must not be generated before goods issue. I used the appropriate condition insinde the message scheme, the message is not generated until goods issue is complete. After processing the DELVRY03-Idoc, the message should be found and generated, but it isn't. When i take a look at the delivery after submitting the idoc, goods issue is complete, picking and packing is done - and no sign of an header message of type LD00. First i thought about a misconfiguration inside my customizing for output determination, but when i access the delivery via vl02n (change delivery), output determination seems to be processed again and without making any changes or actions, LD00 is generated and waiting for processing. After saving the delivery, LD00 is processed and the shipping document is printed exactly where it should be.
    So, as my customizing seems to work and everything else around idoc processing doesn't make any problems either, i conclude that, after processing the idoc, R/3 just needs a little kick to re-run the output determination, find the now fitting condition for LD00, find the appropriate entry in the condition table and print the document.
    I already tried report rsnast00, but this one just seems to run already created messages.
    Any ideas how to automate this little "kick in the butt"?
    Thanks in advance!

    I'm working on a similar issue with ws_delivery_update. I'm not using the IDOC as you are, but I'm using the function in a program of mine to PGI the delivery, but the output isn't being added to the delivery. I've tried to run the function twice as you suggested, but that doesn't seem to work. Do you have any suggestions or ideas on things to try?
    Thanks,
    Eric

  • Canon ICC profiles and color printing issues

    I use two Canon printers -- an all-purpose MP460 and a iP4000 for photos.
    I use Canon's Photo Paper Plus Glossy II paper and Canon inks.
    I print with color management off in the "Print Settings" and by selecting the ICC profile from the drop down in the Aperture print window.
    Since updating to Snow Leopard, the MP460 prints images that are consistently dark using the "SP" ICC profiles.
    The iP4000 has an issue in that it prints images from Aperture with magenta cast in areas of yellow to orange tones.
    I have had prints made through online services that have come back accurate, so I am wondering . . . is this a Canon profile or driver issue? I haven't tried printing from Photoshop or Photoshop Elements as of yet.
    Any suggestions?
    It is very, very frustrating since prints from these printers were fine before Snow Leopard.

    I have a Canon IP5200 and had numerous problems with Aperture printing from OS X10.6.2.
    In November Canon came out with new print drivers. With SNL 10.6.2 update and new canon drivers my prints come out pretty well using canon's ICC profiles. I use the PR3 canon ICC with Costco (Kirkland) paper and am pleased with the results. Hope that helps

  • InDesign CS4 Printing issue

    Hi:
    I use InDesign CS4 in my job as a church office manager. I print bulletins that are usually 3 letter-sized pages, landscape, 2-sided, and newsletters that are 2 11x17 pages, landscape, 2-sided. I'm working in Mac OS 10.5.8.
    Until today, I was using a fairly old HP 8100dn printer. When I upgraded from CS3 to CS4 last summer, I found a strange thing: I couldn't print duplex on letter-sized paper from InDesign. No matter what settings I selected, the printing would not duplex. As a workaround, I had to export everything as a PDF and print from Acrobat, where the duplexing worked fine.
    Weirdly, 11x17 duplex printing worked correctly from InDesign.
    I never solved the problem, but when I posted this on the forum last summer, one responder said that it might have had something to do with the 8100's age and its PostScript Level 2 emulation.
    Just today, my office got a new(er) printer, an HP 8150dn. This one has PostScript Level 3 emulation.
    Precisely the same problem. Letter-sized won't duplex from ID; 11x17 will. Exporting letter-sized documents to PDF and printing from Acrobat is once again the workaround. It's not the worst thing in the world, but it is a bit of a hassle.
    Does anyone have any sort of idea about why this is happening, or better, how it might be fixed?
    Thanks much,
    GT
    PS: ID won't duplex when printing in portrait orientation on letter-sized paper, either.
    Message was edited by: It doesn't work!

    Well, I fixed it, I think… I googled "Printing issues in Mac OS," which led me to install Gutenprint 5.2.5 — whatever the heck that is — and suddenly duplex printing worked in both landscape and portrait on letter-sized paper.
    Unfortunately, and yet not at all surprisingly, I now couldn't print to 11x17 at all. No matter what I did, the printer used Tray 2 (letter), or told me to put custom paper in Tray 1.
    So, as a last-ditch attempt to resolve this before I jumped off the roof, I reset the printer to its factory defaults and deleted all traces of it from Mac OS's Printer and Fax window.
    Then I created one new printer called "8150 (Gutenprint)" using the Gutenprint driver, and one called "8150 (11x17)" using the default HP driver, both using the same IP address. Lo and behold, when I select the one, I can print duplexed on letter size, and when I select the other, I can do the same on 11x17.
    I don't know if this is the sort of thing that a real tech-head would condone, but it finally seems to work. Since I'd never be printing to both printers simultaneously, I figure I can live with this.
    If anyone cares to explain to me in layman's terms what Gutenprint is all about, I'd love to be educated…
    GT

Maybe you are looking for